Tender For Construction Of Govt Sr Secy School Ast Maraog Tehsil Theog Distt Shimla Sh Providing Electrical Installationtherein
Tender Value
8.68 Lakhs
Estimated cost
Bid Submission
27 Mar 2023
0 days left
EMD
17000
Bank guarantee accepted
Document Fee
350
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
theog → Himachal Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Construction Of Govt Sr Secy School Ast Maraog Tehsil Theog Distt Shimla Sh Providing Electrical Installationtherein
BOQ
| Sl. No. | Item Description |
| 1 | Wiring for light point / fanpoint /exhaust fan /call bell point with 1.5 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed PVC conduit and earthing the light point with 1.5 Sq.mm. HRFRLS/PVC insulated single core copper conductor cable as required. |
| 2 | Group C. |
| 3 | Wiring for light point / fanpoint /exhaust fan /call bell point with 1.5 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed steel conduit with modular switch, modular plates, suitable G.I. box and earthing the light point with 1.5 Sq.mm. HRFRLS/PVC insulated single core copper conductor cable as required. |
| 4 | Group C. |
| 5 | Supplying and fixing metal box of 180mmx100mmx60mm deep (nominal size) on surface/recess with suitable size phenolic laminated sheet cover in the front including providing and fixing 5 pin 5/6 amps socket outlet and 5/6 amps, piano type switch, connections, painting etc. as required. |
| 6 | Supplying and fixing metal box of 180mmx100mmx60mm deep (nominal size) on surface/recess with suitable size phenolic laminated sheet cover in the front including providing and fixing 6 pin 15/16 amps socket outlet and 15/16 amps, piano type switch, connections, painting etc. as required. |
| 7 | Supplying and fixing bakelite batten/angle holder including connections etc. as required:- |
| 8 | Supplying and fixing electrical switch board, having 3 No. of 5 amp. switches and socket on suitable size of metal box of 200mm X150 mm X 75 mm deep( nominal size) on surface or in recess with suitable size phenolic laminated sheet cover in the front i/c providing and fixing3 No. 5 pin 5/6 amp socket outlet and 5/6 amppiano type switch, connection, painting etc.as req. (For light plugs) |
| 9 | Providing and installation of exhaust fan of following sizes in the existing opening, including making the hole to suit the size of the above fan, making good the damages, connections, testing and commissioning etc. as required:- |
| 10 | Exhaust Fan, Light duty, (Domestic) 225 mm sweep |
| 11 | Exhaust Fan, Heavy duty, 300 mm sweep |
| 12 | Supplying and erection of street light bracket made of G.I. pipe \"A\" class of suitable length and dia, the pipe bended to give an angle of 100 to 110 degree fitted with bolt & nuts at the top of existing pole or wall including painting the pipe with two coats of approved paint over priming coat complete in all respects as required:- |
| 13 | 32 mm dia. G.I. pipe, heavy class |
| 14 | Providing and installation of following type of ultra slim decorative LED batten with extruded aluminium heat sink,with anti glare polycarbonate diffuser and energy efficient constant integral,electronic driver,suitable for input voltage:AC 220-240 V,50/60Hz,complete with all accessories,including mounting clips & loop in loop out wire,connections,testing and commissioning etc.as required with two years warranty.Make:Philips,GE,Twinkle or any other approved by Engineer-in-Charge. |
| 15 | LED Batten Light 20 W 1200mm |
| 16 | LED Batten Light 10 W 600mm |
| 17 | Providing and installation of following type of Surface / Recess mounting Round / Square type LED Panel Light , powder coated housing made of CRCA sheet, suitable for input voltage: AC 220-240 V, 50/60Hz, complete with all accessories, including making connections, testing and commissioning etc. as required with minimum 2 years warranty. Make: Twinkle, GE, Philips or any other approved by Engineer-in-Charge. |
| 18 | LED Panel Light 15 Watt. |
| 19 | LED Panel Light 36 Watt. ( Size : - 2\" x 2\" ) |
| 20 | Supplying and fixing of integrated LED bulk head fitting comprises of pressure die cast housing acrylic & frame IP 65 protection complete with all accessoriesincluding making connections, testing etc. as required. Make:Philips,GE,Twinkle or any other approved by Engineer-in-Charge. |
| 21 | Bulk head fitting, LED type (Category-A) |
| 22 | Providing and installation of following type of pole mounting LED luminaire with pressure die cast housing with epoxy power coated dark graphite gray colour finish.Prismatic polycarbonate cover with individual LED lenses and seprated energy efficient constant current,non-integral,electronic driver,suitable for input voltage:AC 220-240 V,50/60Hz,complete with all accessories,connections,testing and commissioning etc.as required with minimum two years warranty.Make:Philips,GE,Twinkle or any other approved by Engineer-in-Charge. |
| 23 | LED 45 watt. |
| 24 | Supplying and erection offollowing depth sheet metal cubical pedestal of suitable dimensions with plus-minus 5 cm variation, made from 1.6 mm thick M.S. sheet duly fabricated in a segregated manner for housing of switch fuse units, by welding each compartment on five sides & front side hinged, complete with locking arrangement, with sufficient No. vertical and horizontal intermediate switchgear housing compartments. The cubical pedestal shall havecable entry box at one or two sides, with epoxy powder coated approved paint and bonding to the existing earth etc. The same shall be erected in the 1:2:4 cement concrete plat-form of suitable dimensions 15 cm high from ground level and 45 cm thick. The cubical pedestal shall be 15 cm from the top of cement concrete plat-form:- |
| 25 | 300 mm deep (nominal) |
| 26 | Supplying and fixing sheet metal bus-bar chamber suitable for 63 Amp. 415 volts capacitywith 4 No. copper strip bus-bars each of length 450mm & cross-sectional area (16mmx3.17mm), enclosure made from 1.6 mm thick M.S. sheet having overall dimensions (530mmx350mmx150mm) nominal with all accessories including connections, earthing the body etc. as required:- |
| 27 | Supplying and fixing sheet metal bus-bar chamber suitable for 200 Amp. 415 volts capacitywith 4 No. copper strip bus-bars each of length 450mm & cross-sectional area (25.4mmx4.75mm), enclosure made from 1.6 mm thick M.S. sheet having overall dimensions (530mmx450mmx150mm) nominal with all accessories including connections, earthing the body etc. as required:- |
| 28 | Providing and fixing TP&N switch disconnector fuse unit cubical type, 415/500 volts with 3 No. HBC/HRC fuses, in sheet steel enclosure including drilling holes on the board, connections, earthing the bodyetc. as required. |
| 29 | 63 Amp. Category-A |
| 30 | Providing and fixing TP&N switch disconnector fuse unit panel mounting, 415/500 volts with 3 No. HBC/HRC fuses, open execution, including drilling holes in the cubical, making connections, etc. as required. |
| 31 | 160 Amp. Category-A |
| 32 | Providing and installation of following type of LED retrofit lamp B-22 holder base with polycarbonate body and aluminium heat sink, suitable for input voltage: AC 220-240 V, 50/60 Hz, including mounting in existing fixture, testing etc. as required complete in all respects. Make: Philips, Twinkle, GE or any other approved by Engineer-in-Charge. |
| 33 | LED Retrofit lamp 9W |
| 34 | Wiring for light plug with 2x1.5 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed steel conduit along with 1 No.1.5 Sq.mm. HRFRLS/PVC insulated single core copper conductor cable for earthing as required. |
| 35 | Wiring for power plug with 4x4 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed steel conduit along with 2 No.4 Sq.mm. HRFRLS/PVC insulated single core copper conductor cable for earthing as required. |
| 36 | Wiring for circuit/sub-main with following size PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed steel conduit along with 1 No.HRFRLS/PVC insulated single core copper conductor cable of same size for earthing as required. |
| 37 | 2x2.5 Sq. mm. |
| 38 | Supplying and drawing following size of PVC insulated, heat resistant, flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in existing surface / recessed, Steel/PVC conduit as required. |
| 39 | PVC insulated HRFR LS Copper conductor 1.5 Sq. mm. |
| 40 | 3x1.5 Sq. mm. |
| 41 | Wiring for circuit/sub-main with following size PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed steel conduit along with 1 No.HRFRLS/PVC insulated single core copper conductor cable of same size for earthing as required. |
| 42 | 2x10 Sq. mm. |
| 43 | Providing, laying and fixing of one No. aluminium conductor, PVC insulated and PVCsheathed, armoured/XLPE power cable, working voltage 1100 volts gradeon surface etc. of the required size:- |
| 44 | Armoured cable 70 sq. mm (3.5 core) |
AI Tender Summary
Tender Timeline
Mar 20, 2023
11:30 IST
Tender Published
Tender notice published.
CompletedMar 27, 2023
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedMar 28, 2023
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender