Public Works Department-PWD has published Tender For Repair And Maintenance On Type-Ii Quarter Ground Floor & First Floor Chc Nadaun.(Sh:- Replacement Of Roofing, Providing Chajjas/Sun Shades, Repairing Of Plastering, Minor Repair To Sr Stone Masonry, Painting To Walls And Ceiling Exterior As Wel. Submission Date for this Tender is 29-03-2023. Electrification Work Tenders in hamirpur Himachal Pradesh. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 25-Mar-2023 | Corrigendum | Date | 29-03-2023 |
| Sl. No. | Item Description |
| 1 | Removing old paint or polish from wood and wood based surfaces with paint remover of approved brands and manufacture and making the surface even with hand scraping complete as per the direction of Engineer-in-Charge and carriage of material within all leads and lifts and other incidentals. The rates are inclusive of octroi, royality, malakana, toll tax, sale tax or other taxes imposed by the Government. |
| 2 | Providing and applying white Cement Based Putty of average thickness 1 mm (one millimetre)of approved brand and manufacturer (J K White/ Birla White) over the plastered wall surface to prepare the surface even and smooth complete upto all floor levelincluding entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Chargeincluding all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 3 | Applying one coat of Acrylic washable emulsion Spectrum quartz king or equivalent finish for interior painting with brushes plain smooth finish composed of acrylic polymere in emulsion inorganic/special pigment liliceous aggregate anti funcicides anti-rusting & foaming in two coat including necessary putty to give smooth even surface sand papered smooth completeincluding entire carriage of materials in all leads and lifts as per the direction of Engineer-in-Charge.The rates are inclusive of octroi, royality, malakana, toll tax, sale tax, GST or other taxes imposed by the Government. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 4 | Finishing walls with Acrylic Smooth Exterior Paint of ASIAN- APEX ULTIMAof required shade on New work (Two or more coat applied @ 1.67 ltr/10 sqm (at the rate of one point six seven litre per ten square metre)over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm (at the rate two point two zero kilogram per ten square metre) complete upto all floor levelincluding entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Chargeincluding all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 5 | Painting wood work with Deluxe Multi Surface Paint of required shade withone coat applied @ 0.90 ltr/10 sqm (at the rate of zero point nine zero per ten square metre) over an under coat of primer applied @0.75 ltr/10 sqm (at the rate of zero point seven five per ten square metre) (ASAIN/NEROLAC/ICI-DULUX)( premium apecolite Gloss) of approved brand and manufactureincluding entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Chargeincluding all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 6 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & lengthSecond class deodar wood including entire carriage of material with in all leads, lifts, drawings, technical specifications as per direction by Engineer-in-Chargeincluding other incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 7 | Providing and fixing 12mm ( twelve millimetre) thick pre-laminated board both sideBWPparticle board ofAction Tessa(HDHMR)/Kitply/Century Ply/Green Plyexterior/interior gradein matt finish ISI marked IS No: 12823 in panelled shutters with frame of first class deodar wood for doors including bright finished black enamelled iron but hinges with necessary screws40mm ( forty millimetre) thick frame of Ist class deodar woodincluding entire carriage of material with in all leads, lifts, drawings, technical specifications as per the direction by Engineer-in-Charge and other incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 8 | Providing and fixing 35 mm (Thirty five millimetre) thick Second class deodar wood shutters wire gauge shutters using galvanized M.S. wire gauge of average width of aperture 1.4 mm (One point four millimetre) in both directions with wire of dia 0.63 mm (Zero point six three millimetre), for doors, windows and clerestory windows with hinges and necessary screws as per direction of Engineer-In-Charge including entire carriage of material within all leads and lifts and other incidentals.The rates are inclusive of octroi, royalty, malakana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 9 | Providing and fixing 250x10 mm (two Hundred fifty into ten millimetre) nominal size. aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etcetracomplete including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Chargeincluding all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government |
| 10 | Providing and fixing 150x10 mm (One Hundred fifty into ten millimetre) nominal size. aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etcetracomplete including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Chargeincluding all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government |
| 11 | Providing and fixing 125 mm (One hundred twenty five millimetre) aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etcetra complete including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Chargeincluding all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government |
| 12 | Providing and laying10mm ( ten millimetre) thickFull bodychargedantiskid, water proof stain and impact resistant heavy duty vitrified tiles ofOrient/ Kazaria/ Nitco, Somany, Rak, Johnson & Johnson 600x600 ( six hundred into six hundredmillimetre) manufactured of approved shade and colour in risers of steps, skirting and dado laid over 12mm ( twelve millimetre) thick cement mortar 1:3 (one cement : three sand) jointed with cement slurry mixed with pigment to match the shade of tiles as required complete inpattren finish,colour and shadeas approved by Engineer -in- charge upto all floor levelin all heightsincluding entire carriage of material with in all leads, lifts, drawings, technical specifications as per the direction by Engineer-in-Charge and other incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 13 | Repair to plaster of thickness 12mm to 20mm (Twelve millimetre to twenty millimetre) in patches of area 2.50 sqm (Two point five zero square metre) and under including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground with cement mortar 1:4 (One cement : four fine sand) complete including entire carriage of material with in all leads, lifts, drawings, technical specifications as per direction by Engineer-in-Chargeincluding other incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 14 | Providing and fixing viterous china water closet squatting pen (Indian Type W.C. pan size 580 mm ( five hundred eighty millimetre) (Earth Work, bed concrete foot rest and trap tobe measured and paid for separately (Orrissa Pattern)hindware ,ceraUniversal Pan No. 2071 ( two thousand seventy one) (58x40) ( ffity into forty) Snow White Shadeincluding entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Chargeincluding all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 15 | Providing and fixing630mmx450mm (Six hundred thirty into four hundred fifty millimetre) (under Counter) vitreous china wash basin Cera / Hindware/ Parryware make with single hole for pillar tap with CI or M.S. brackets painted white including cutting holes and making good the same but excluding fittings complete in all floor level/heightsincluding entire carriage of material with in all leads, lifts, drawings, technical specifications as per direction by Engineer-in-Chargeincluding other incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 16 | Providing and fixing CP brass bib tap (long body ) with wall flange 15mm (Fifteen millimetre) dia of Jaquar (CON-107KN)/Hindware Makecompleteincluding entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Chargeincluding all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 17 | Providing and fixing 15mm (fifteen millimetre) nominal bore C.P. brass angle valve for basin mixer and geyser points of approved quality of Jaquar (SQT-ESS-526)conforming to IS:8931 complete as per direction of Engineer-In-Charge including entire carriage of material within all leads and lifts and other incidentals.The rates are inclusive of octroi, royalty, malakana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 18 | Making plinth protection 50mm ( fifty millimetre) thick of cement concrete 1:3:6 (one cement : three coarse sand (zone - III) : six graded stone aggregate 20 mm ( twenty millimetre)nominal size) over 75mm( seventy five millimetre)thick bed of dry brick ballast 40 mm ( forty millimetre) nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling and dressing and finishing the top smooth including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Chargeincluding all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 19 | Dismantling roofing including ridges,hips, valleys, gutters, G.S. sheet etcetra stacking the serviceable materials and disposal of un-serviceable materials within all leads and lifts complete and stacking them including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 20 | Dismantling cement asbestos celotax/hard board in ceiling or partition wall including stacking of serviceable materials and disposal of un-serviceable materials within alllead and lifts (Frame work such as joists, beams to be measured and paid for separately) as per direction of Engineer-in-Charge including entire carriage of material within all leads and lifts and other incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 21 | Providing asbestos cement corrugated semicorrugated sheet roofining fixed with galvanised iron J or L hook, bolts and nuts 8 mm (Eight millimetre) dia G.I. plain bitumen washer complete (excluding the cost of purlins, rafters and trusses) 6mm (Six millimetre) thick sheet as per direction of Engineer-in-Charge including entire carriage of material within all leads and lifts and other incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 22 | Providing and fixing 0.80mm (Zero point eight zero millimetres) thick corrugated G.I sheet roofing fixed with galvanised iron J.or L. hooks bolts and nuts 8 mm (Eight millimetres) diameter with bitumen and G.I. limpet washers filled with white lead complete excluding the cost of purlins refters and trusses shall be got approved from the Engineer-in-Charge with all accessories as required and the direction of Engineer-in-Charge in all heights completeincluding entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 23 | Providing and fixing MS BP Sheet 1.66mm to 2.00mm (One point six six to two millimetre) thick of TATA/Sail make in eaves board/ facia/ soffits/ ceiling including cutting fixing and welding to steel roof members and applying a coat of red lead primer complete upto all heights as per instruction of Engineer in Charge ( base members of steel work shall be measured and paid separtely ) including entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Chargeincluding other incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 24 | Steel work welded in built up sections(TATA/ SAIL/ Apollo/ JSW Make ) in framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etcetra as required in gratings, door and window frames, guard bar, ladder, railings, brackets, gates and similar works complete upto all floor level including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Chargeincluding all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 25 | Pointing on square rubble, coursed or un-coursed stone masonry with cement mortar 1:3 (one cement : three sand) Flush/Ruled pointing as per direction of Engineer-in-Charge including entire carriage of materials within all leads and lifts and other incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 26 | Constructing brick masonry manhole in cement mortar 1:4 ( one cement : four coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (one cement : one point five coarse sand (zone- III) : three graded stone aggregate 20 mm (twenty millimetre) nominal size), foundation concrete 1:4:8 mix (one cement : four coarse sand (zone- III) : eight graded stone aggregate 40 mm (forty millimetre) nominal size), inside plastering 12 mm (twelve millimetre) thick with cement mortar 1:3 (onecement : three coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (one cement : two coarse sand : four graded stone aggregate 20 mm (twenty millimetre) nominal size) finished with a floating coat of neat cement complete as per standard design including cutting and threading the pipes complete Inside size 90x80 cm (ninety into eighty centimetre)and 45 cm (forty five centimetre) deep including C.I. cover with frame (light duty) 455x610 mm (four hundred fifty five into six hundred ten millimetre) internal dimensions, total weight of cover and frame to be not less than 38 kg ( thirty eight kilogram) (weight of cover 23 kg (twenty three kilogram)and weight of frame 15 kg ( fifteen kilogram) With common burnt clay F.P.S. (nonmodular) bricks of class designation 7.5 (seven point five)including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Chargeincluding all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 27 | Providing and fixing Single socketed pipes 150mm ( one hundred fifty millimetre)dia of Supreme/Fenolax/ Vectus make on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm ( ten millimetre)gap for thermal expansion complete upto all floor levelincluding entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Chargeincluding all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
