Madhyanchal Vidut Vitran Nigam Limited has published Construction Of 33/11 Kv 2X5 Mva Gis Based Substation Rajbhawan, Lucknow Including Civil Work And Work Of Construction Of Associated 33 Kv & 11 Kv Feeders On Turnkey Basis. Submission Date for this Tender is 28-03-2023. Civil Work Tenders in Lucknow Uttar Pradesh. Bidders can get complete Tender details and download the document.
Sl. No. | Item Description |
1 | 33KV3x300 sq mm XLPE cable |
2 | 33KV ST/Th C/J kit3x300 sq mm |
3 | 33KVEnd termination O/Door 3x300 sq mm |
4 | 33/11 KV Power T/F 5 MVAas per UPPCL Norms. |
5 | 33 KV Four Way RMU AS PER T.S. ANNEXED IN TENDER DOCUMENT AS PER UPPCL NORMA (PREFERABLY M/S Siemenn, M/s Schneider, M/s ABB make |
6 | 33 KV I/door J/C kit 3x300 sqmm |
7 | 11 KV O/Door C/J kit 3x300 sq mm |
8 | 11 KV I/Door C/J kit 3x300 sq mm |
9 | 24 Volt Battery set with battery Charger |
10 | 11 KV XLPE Cable 3x300 sq mm |
11 | 11 KV XLPE Cable 3x185 sq mm |
12 | 11 KV O/Door C/J kit 3x185 sq mm |
13 | 11 KV I/Door C/J kit 3x185 sq mm |
14 | 33 KV GIS panel set (2I/C+1B/C+1 B/R+2 O/G) as per T.S annexed in tender document/UPPCL Norms. (PreferablyM/S Siemenn, M/s Schneider, M/s ABB , M/s CGPISL make) |
15 | 11 KV GIS Panel set(2I/C+1B/C+1B/R+4 O/G) as per T.S annexed in tender document/UPPCL Norms. (PreferablyM/S Siemenn, M/s Schneider, M/s ABB , M/s CGPISL make) |
16 | STP 11 M long |
17 | 33 KV pin insulator |
18 | 33 KV pin with nut |
19 | MS angle 65x65x6 mm |
20 | Top channel 125x65 sqmm |
21 | Stay wire 7/8 SWG |
22 | MS Earth Rod 20x2500 mm |
23 | MS Pipe Holding Clamp |
24 | Cable Holding Clamp |
25 | Nut Bolt with washer |
26 | Cable marker |
27 | GI Pipe 6" Dia |
28 | HDPE Pipe 160 mm Dia |
29 | Cu cable 6x2.5 sqmm |
30 | Cu cable 4x2.5 sqmm |
31 | Cu cable 2x2.5 sqmm |
32 | Empire Tape |
33 | PVC Tape |
34 | MS Round bar 32 mm |
35 | Supply and Fixing of suitable size of pregalvenized, powder coatedcable tray in control room/required place |
36 | Providingand fixing thermal insulation of ceiling (under deck insulation) with Resin Bonded Rockwool conforming to IS: 8183, density 48 kg/ m3, 50 mm thick, wrapped in 200 G Virgin Polythene bags fixed to ceiling with metallic cleats (50x50x3 mm) @ 60 cm and wire mesh of 12.5mm x 24 gauge wire mesh, for top most ceiling of building. |
37 | Cable stand with foundation |
38 | Neutral Stand structure with foundation |
39 | Construction of Power T/F plinth suitable for 33/11KV 5 MVA power T/F of size 4x3x1.3 having 0.4 mtr height above ground level. The work includes excavation of foundation base concreting in cc ratio 1:6 Mas 12 1st class brick work in ratio 1:4 with coarse sand ,foundation cc in ratio 1:4:8using M.S bar of 12 mm dia for reinforcementthe work includes laying of 2 nos rail pieces 4 mtr long as per drawing/practice the plinth shall be finished in all respect. |
40 | Construction of plinth suitable for33 KV, 04 way Ring main Unit size (1.5x1.0x1.0 M) with civil material as per site requirement. |
41 | Installation of Complete Lighting System for switchyard, control room building, main gate and sub-station boundary including fans as per Detailed Technical Specifications |
42 | Painting of Structures in SS |
43 | Construction of Fire wall,RCCframed with fire bricksin between transformers (4.5x0.345x4.00 ) Mtr |
44 | Earthing of substation complete as per specification (Indoor earthing) |
45 | Earthing of substation complete by round bar 32 mm dia completeas per specification and connectin of all switchyard equipment by GI Flat 50x6 mm (Outdoor switchyard earthing) |
46 | RCC Cable trench 850x800x150mm with cover as per drawing |
47 | Control cable trench 12" Wide |
48 | Control cable trench cover 0.5 Mtr Long |
49 | Pipe Boring type earthing complete minimum 40 mtr deep from ground level complete Job with connection of quipment by 50x6 mm GI Strip |
50 | Laying of11 KV 3x300 sq mm XLPE cable in constructed trench |
51 | Fabrication, erection, grouting, plinthing & painting of double pole for 33 KVcable exposureon ST. Pole 11 Mtr long with fixing of necessary clamp channel ,angle 33 KV Pin & pin insulator making double ckt 3 phase 3 wire bus bar for separate cablewith single core cable including electrode earthing , danger boared,barbed wire complete in all repectas per RESPO Norms . |
52 | Hoisting of3x300 sq mm sizes of33 KV single cable on existing/erected double pole including GI pipe 3 mtr long 6"" dia including jumpering,dressing of cable with required all necessary clamps and nut, bolts. |
53 | Fixing of Cable marker on cable route and dipitching of feeder name and voltage onn cable marker for 33 KV cable. |
54 | Laying of 11 KV 3x300 sq mmXLPE Doublecableby digging of trench 1000 mm, deep, 750 mm wide its boxing with brick,sand,stone slabafter laying of cable separation of cable by brick wall up to stone slab filling and proper levelling & ramming. The ferruling of cable also include in this work.(all the material shall be arranged bycontractor except 11 KV XLPE cable 3x300 sq mm) |
55 | Laying ofdouble CKT 33 KV 3x300 sq mm XLPE cablein digging of trench 1100 mm, deep, 650 mm wide its boxing with brick,sand,stone slabafter laying of cable separation of cable by brick wall up to stone slab filling and proper levelling& ramming. The ferruling of cable also include in this work |
56 | Laying of 33 KV 3x300 sq mm XLPE cable in GI pipe size 150 mm diaby HDD method as per Norms. The ferruling of cable also include in this work |
57 | Laying of 33 KV 3x300 sq mm XLPE cable by drilling method in HDPE PIPE 160 mm dia with drilling machine The cable shall be laid at the depth 1.5 mtr. to 3.00 mtr. from the surface of the road the cable shall be laid in such a manner that RESPO norms have been followed. |
58 | Laying of33 KV 3x300 sq mm XLPE cable by drilling methodwith drilling machine The cable shall be laid at the depth 1.5 mtr. to 3.00 mtr. from the surface of the road the cable shall be laid ina manner that RESPO norms have been followed. |
59 | Laying of double CKT 33 KV 3x300 sq mm XLPE cable in constructed trench |
60 | Laying of 11 KV 3x185sq mm XLPE cable in existing constructed trench and proper dressing and ferruling. |
61 | Laying of 11 KV 3x185 sq mm XLPE by digging of trench 900 mm, deep, 650 mm wide its boxing with brick,sand,stone slab after laying of cable separation of cable by brick wall up to stone slab filling and proper levelling & ramming.The ferruling of cable also include in this work. |
62 | Laying of 11 KV 3x185 sq mm XLPE cable in HDPE pipe 160 mm dia by HDD method |
63 | Laying of following sizes of 33 KV and 11 KV cables in cable tray with proper dressing of cable |
64 | 33 KV XLPE Cable 3x300 sq mm |
65 | 11 KV XLPE Cable 3x300 sq mm |
66 | 11 KV XLPE Cable 3x185 sq mm |
67 | Fixing of Cable marker on cable route and dipitching of feeder name and voltage on cable marker for 11 KV cable. |
68 | High Pressure testing of 33 KV and 11 KV cables as per Norms |
69 | Hoisting, Connection of following sizes of cables on existing/erected cable stand, Distribution T/F, 33 KV RMU including jumpering,dressing of cable with required all necessary clamps and nut, bolts. |
70 | Hoisting of 33 KV XLPE cable 3x300 sq mm single cable in33 KV RMU |
71 | Hoisting of33 KV XLPE cable 3x300 sq mm single cable at cable stand |
72 | Hoisting of11 KV XLPE cable 3x300 sq mm single cable in 11 KV GIS pannel. |
73 | Hoisting of11 KV XLPE cable 3x300 sq mm single cable at cable stand |
74 | Hoisting of11 KV XLPE Cable 3x185 sq mm single cable at cable stand |
75 | Making heat & shrinkables joints of following size and types for XLPE Cable by heat and shrinkables jointing kits. |
76 | 33 KV3x300 sq mm XLPE O/D J/Kit |
77 | 33 KV ST/TH J/C kit 3x300 sq mm |
78 | 33 KV I/D J/C kit 3x300 sq mm |
79 | 11 KV3x185 sq mm XLPEI/D J/Kit |
80 | 11 KV3x300 sq mm Cable jointing kit I/D |
81 | 11 KV3x300 sq mm Cable jointing kit O/D |
82 | 11 KV 3x185 sq.m.. XLPE O/D J/KIT |
83 | T & P of Sub-Station & Switchgears including primary tools (As per Specification) |
84 | 4.5 Kg. CO2 fire extinguisher, portable type |
85 | 5 kg. Dry chemical powder fire extinguisher, portable type |
86 | Fire buckets (4 nos.) with stand filled with dry sand |
87 | Rubber matting 20 sq. mm. thick size (1 X 2 mtr.) |
88 | S/S name board (SMC) with stand |
89 | Protection Board complete |
90 | Supply of following auxiliary material |
91 | Office table ( 1200x750x600 mm) as per standard. |
92 | Armed Chair |
93 | Notice Board as per norms |
94 | Key Board |
95 | Load Chart Board |
96 | Line Chart Board |
97 | S/S Board |
98 | Civil Work |
99 | Excavation in foundation in ordinary soil (Loam Clay or Sand) including lift upto 1.5m and lead upto 30m and including fitting, watering and ramming of excavated earth into the trenches or into the space between the building and insides of the foundation trenches or into the plinth and removal and disposal of surplus earth as directed by the engineer-incharge upto a distance of 30m from the foundation trenches. |
100 | River Bed Fine Sand filling in plinth including supply of necessary quantity of fine sand from outside the UPPCL premises including watering, dressing etc. Rate to include cost of all materials, labour and T&P etc. required for proper completion of work. |
101 | Earth filling under floors and/or corporation area including cost of earth obtainedwith in 8 km distance outside corporation area including all taxes (if any) andits carriage including watering, ramming in 20 cm layers and dressing of earth etc. all complete. |
102 | Levelling and dressing and making proper slopes including cuttingand filling of earth upto a depth 100mm if so required includingall labour T&P etc. required for proper completion of the work . |
103 | Concrete with 4cm gauge I class brickballast, coarse sand and cement in proportion of 12:6:1 in foundations and under floors including supply of all materials, labour and tools and plants etc. required for proper completion. |
104 | Concrete with 4cm gauge I class brickballast, coarse sandand cement in proportion of 10:5:1 in foundations and under floors including supply of all materials, labour and tools and plants etc. required for proper completion. |
105 | Cement concrete with 2cm gauge approved hard stone ballast,coarse sand and cement in proportion of 4:2:1including supply of all materials, labour,side shuttering ifrequired and T&P etc. required for proper completion of work. |
106 | RCC work with cement, approved coarse sand and2 cm gauge graded approved hard stone ballast like granit, quartzite etc from Dalla, Jhansi or other quarries in proportion 1:2:4in lintels of doors and windows, excluding supply of reinforcement & its bending but including its fixing and binding the same with binding wire, including cost of all other materials labour and T&P. (CSI No. 5.10) |
107 | Concreting of 40 mm thick RCC trench covers in mild steel framework with RCC 1:1.5:3 in Cement, coarse sand and 2cm gaugegraded hard stone ballast with 3mm thick floating coat of neatcement finish on top of cover complete with all labour, materials and placing the same in proper position at required location of cable trench within the substation area. (CSI No. 5.18) |
108 | RCC work with cement, approved coarse sand and2 cm gauge graded approved hard stone ballast like granite, quartzite etc from Dalla, Jhansi or other quarries in proportion 1:1.5:3in lintels of doors and windows, excluding supply of reinforcement & its bending but including its fixing and binding the same with binding wire, including cost of all other materials labour and T&P. . (CSI No. 5.23) |
109 | R.C.C work with cement approved coarsesand (F.M1.8 to 2.5)and 2cm gauge graded approved hard stone ballast like grainite,quartzite etc from Dalla, jhasi or other quarried and approved coarse sand in proportopn 1:1.5:3 in slab, including supply of reinforcement & its bemding but incliding its fixiing and binding the same with binding wire, including cost of all other materials labour and T&P. |
110 | RCC work with cement, approved coarse sandand2 cm gauge graded approved hard stone ballast like granite, quartzite etc from Dalla, Jhansi or other quarries in proportion 1:1.5:3inlighter beams i.e. having span upto6m, excluding supply of reinforcement & its bending but including its fixing and binding the same with binding wire, including cost of all other materials labour and T&P . (CSI No. 5.25) |
111 | RCC work with cement, approved coarse sand and2 cm gauge graded approved hard stone ballast like granite quartzite etc from Dalla, Jhansi or other quarries in proportion1:1.5:3 in raft foundation and footings , excluding supply of reinforcement & its bending but including its fixing and binding the same with binding wire, including cost of all other materials labour and T&P. (CSI No. 5.27) |
112 | RCC work with cement, approved coarse sandand2 cm gauge graded approved hard stone ballast like granite, quartzite etc from Dalla, Jhansi or other quarries in proportion 1:1.5:3in RCC T beam-slab and column, excluding supply of reinforcement & its bending but including its fixing and binding the same with binding wire, including cost of all other materials labour and T&P . (CSI No. 5.29) |
113 | First class brick (Class-150 work in 1:6 cement and coarse sand (F.M. 1.8 to 2.5) mortar in foundation and plinth including supply of all materials, labour & T&P etc. required forproper completion of work. |
114 | First class brick (Class-150 work in 1:6 cement and coarse sand (F.M. 1.8 to 2.5) mortar in Super Structure for one brick thick wall including supply of all materials, labour & T&P etc. required forproper completion of work. |
115 | First class brick (Class-150 work in 1:6 cement and coarse sand (F.M. 1.8 to 2.5) mortar in Super Structure for half brick thick wall including supply of all materials, labour & T&P etc. required forproper completion of work. |
116 | First class brick laid dry in foundation and plinth as incircular soakpit walls of one brick thickness and 2.0 to 3.0M depthincluding cutting moulding bricks as required including cost ofall materials labour and T&P complete. (CSI No. 6.16) |
117 | S/F of brick bats in soak pit including supply of all labour,material T&P etc. required for proper completion of work |
118 | Supply and fixing of 40 mm thick commercial quality Sitapur plywood flush door shutters including fixing of wooden cleats and stoppers and including fixing and adjustment of oxidized hinges, bolts, locks, handles, springs and/or other fitting and including their supply andincluding painting with two coats of black Japan on all iron fittings if necessary. |
119 | Mild Steel or Iron work in heavy sizes such as trusses built upgates, door frames, record, racks roof work gates etc. wrought torequired form including holes rivetting or welding where necessary and also fixing in proper position and alignment including cost of all materials supplied by contractor. (CSI No. 9.01) |
120 | TMT/Tor steel in plain work such as reinforced concrete orreinforced brick work (when not included in an over all rates)wrought to required shape as necessary including bending forproper completion of the work and including supply of steel its wastage, bend, hooks and authorized overlapping shall be measured. (Steel shall be arranged by the contractor) (CSI No. 9.03) |
121 | Providing and fixing steel glazed window and ventilators ofstandard rolled Mann or Mahavir steel sections conforming to IS7452-1974 as per drawing joints metered & welded with 100x14x3.15 mm holdfast embedded in cement concrete block 15x10x10 cm. Size of 1:3:6 proportion i.e. 1 part of cement 3 part of approved coarse sand & 6 part of graded stone (aggregated 20mm. Nominal size) S/F of glass panes of plain pin headed 4mm. Thick nuts glazing clips and special putty of approved make complete and including a cost of red oxide paint. The fabrication should conform to I.S.1038-1975. (Aluminum beading with rubber packing included). (CSI No. 9.17) |
122 | Supply and fixing galvanised mosquito proof jali (16x24 gauge) withM.S. flat of 20 x 3 mm. size, on both sides screwed or welded to windowor door frame. (CSI No. 9.18) |
123 | S/F welded wire mesh size 75x25mm and rectangularmade out of 10 SWG over M.S. angle frame with M.S. flat welded as required including cost of drilling holes, washer welding etc as required including cost of all material, labourand T&P etc. required for proper completion of work . except cost of M.S angle and flat. (CSI No. 9.22) |
124 | Grouting of vertical or inclined post of pale/chain/security fencing in truelevel, alignment and in plumb or inclination as required,including cost of all labour, materials and T&P required forproper completion of work. ( Post and concrete for grouting shall be measured separately) (CSI No. 9.28) |
125 | P/F Concertina coilfencing with required dia. 600 mm upto 3 M height of wall between existing angle iron ‘Y’ shaped placed 2.4 M or 3.0 M apart and with 6 horizontal R.B.T. stud tied with G.I. staples and G.I. clips to retain horizontal including necessary bolts or G.I. barbed wire tied to angle iron all complete ( No. of rounds will be 7 to 8 in one Meter length) as per direction of Engineer I/C with reinforced barbed tape (R.B.T.)/ Spring core (2.5mm thick ) wire of high tensile strength of 165 kg/Sqmm with tape ( 0.52 mm thick ) of supreme make or equivalent and weight 43.478 gm/meter ( cost of MS angle, C.C. blocks shall be paid separately).(CSI No. 9.37) |
126 | Supply and fixing 6mm thick polycarbonate multiwall sheet ,fixing in position with J or U bolts 10 mm. dia with G.I. Limpet & bitumen washers including supply of all materials, labour,wastage. and T&P etc. required for proper completion of the work. (CSI No. 10.13) |
127 | 12 mm thick plaster with cement mortar consisting of one part of cement & four part of coarse sand (1:4), minimum thickness not to be less then 10 mm including supply of all material, labour and T&P etc for proper completion of work. |
128 | 12 mm thick plaster with cement mortar consisting of one part of cement & six part of coarse sand(1:6),minimum thickness not to be less then 10 mm including supply of all material, labour and T&P etc for proper completion of work.(CSI No. 11.09) |
129 | 12 mm thick plaster with cement mortar consisting of one part of cement & six part of coarse sand(1:6),minimum thickness not to be less then 10 mm including supply of all material, labour and T&P etc for proper completion of work but for plaster over rough face of one brick thick wall |
130 | Providing (12x15) mm section groove in plasterincluding all material, labour andT&P etc. required for proper completion of the work. |
131 | Making drip coarse (25x12) mm in 1:2 cement and coarse sandincluding supply of all materials, labour and T&P etc requiredfor proper completion of work.(CSI No. 11.19) |
132 | 3 mm thick floating coat of neat cement finish including supply of all materials,labour and T&P etc. required for proper completion of the work.( cement consumption 0.044 bag/Sq.m.) (CSI No. 11.20) |
133 | Supply and Laying 8 mm thickglazed floor tiles of Somany, Johnson or equivalent make, , laid with1:3 cement and approved coarse sand mortar finished with whitecement slurry, jointing and polishing complete, including supplyof all materials, labour and T&P etc. required for proper completion of the work.(CSI No. 12.11) |
134 | Supply and Laying 6 mm thickglazed tiles in skirting / dado laid with1:3 cement and approved coarse sand mortar finished with whitecement slurry, jointing and polishing complete,including supplyof all materials, labour and T&P etc. completion required for proper completion of the work. |
135 | Providing and laying18mm. thickKotastonein flooring or skirtingoverbasecementmortar 1:4 mix and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing complete and including supply of all materials labour and T&P etc required for proper completion of the work. |
136 | Providing and laying of 16 mm thick granite ( black/ brown) inflooring or skirting ,of approved shade, colour,size and pattern , laid over base cement mortar 1:4 mix including finishing the joints with white cementmixed with pigment to match the shade of granite floor including cost of all material, labour and T&P required for proper completion of the work, as per direction of Engineer incharge. |
137 | Providing and laying floor of 8 mm thick vitrifiedtiles in flooring or skirting of approved brand (Bell, Johnson or equi. make)size of 600x600 mmof approved shade, colour and pattern , laid over base cement mortar 1:4 mix including finishing the joints with white cementmixed with pigment to match the shade of tile including cost of all material, labour and T&P required for proper completion of the work. |
138 | Supply of 80 mm thick I shaped mechanically compressed inter locking cement concrete paver block manufactured by high pressure & controlled vibration machine having plan dimension 200X(160+120 mm) with minimum 5 mm thick toping of O.P.Cement mixed with 25% marble powder. The compressive strength of concrete pavers blocks shall not be less than 30 MPa & 4.5 Kg/No. including cost of all material, labour, T&P etc. required for proper completion of work as directed by Engineer-in-charge but excluding G.S.T. which shall be paid extra as per rules. |
139 | Paintingor varnishing new iron work in small areas or new wood work with one coat of ready mixed priming paint and two coat of approved superior quality ready mix paint "Luxol" or equivalent brand or varnish including supply of all materials, labour and T&P etc. required for proper completion of the work. Paint to be used should confirm to I.S. 103-1950 |
140 | One priming coat and one coat oil bound distemper on new work includingsupply of all materials,labour and T&P etc. required for propercompletion of the work. but for every coat after the first coat |
141 | Finishing walls with water proof cement paint of approved madelike "Super Snowcem" or equivalent quality on new work withtwo coats to give an even shade including supply of allmaterials, labour etc. required for proper completion of work but for each coat of water proof cement paint after the first two coats to give an even shade. |
142 | Applying Birla or equivalent putty on new interior or exterior surface over one coat of water based cement primer of ICI or equivalent brand for smoothening and levelling of the surface as per requirement and direction of Engineer I/C including cost of all material, labour, T & P etc required for proper completion of work. (CSI No. 13.20) |
143 | Painting two coat with APEX or equivalent brand weatheer coat paint on New wall surfaces (well prepared with Birla putty and one coat or primer ICI or equivalent brand for shall be paid separately) including thorough washing eith water including cost of all materials, labour, T&P required for proper completion of work . |
144 | Laying cement concrete road slabconsisting of 1 part cement 2part approved coarse sand and 4 part approved 20mm down graded stone aggregate over prepared sub grade after its rectification and bringing it to proper camber and shape,finishing with TRIMIX machine ,concrete hardner and making good to the satisfaction of E/I inclduing cost of all materials, labour and T&P etc. required for proper completion of the work. (CSI No. 18.12) |
145 | Drilling 300 mm dia. boring.bore from from 0 M BGL to 90 M BGL. work to be completed as per direction of Engineer I/C . |
146 | Drilling 300 mm dia. boring.bore from from 90 M BGL to 120 M BGL. work to be completed as per direction of Engineer I/C . |
147 | Lowering of tube well assembly alongwith shrouding with pea gravels, testing, verticality of Tube well and washing of the tube well from G.L. to 180 Meter B.G.L. the cost including all labour, materials, T&P required for proper completion of work but excluding the cost of slotted pipe/ plain M.S/PVC.pipe assembly and Pea gravel. |
148 | Providing110mm dia Plain PVC CASING PIPES (Aroma /Supreme) (Pressure10 Kg./ Sqcm.) for making tubewell assembly and cartage to boring site, including cost of all labour, materials and T&P required for assembly making and proper completion of work. |
149 | Providing 110mm dia Slotted PVC CASING PIPES (Aroma /Supreme) (Pressure10 Kg./ Sqcm.) for making tubewell assembly and cartage to boring site, including cost of all labour, materials and T&P required for assembly making and proper completion of work. |
150 | Supply and fixing of 110 mm dia. PVC. bail plug of heavy qualityincluding all labour material & T&P. |
151 | Supply and fixing of 110 mm dia. PVC. top plug of heavy qualityincluding all labour material & T&P. |
152 | Supply and fixing of 32 mm dia. G.I. ("B" class ) column pipes JTC/ JINDAL make with column coupling socket as required for proper completion of workincluding all labour material & T&P. |
153 | Supply and fixing 32mm dia. support clamps for column pipesmade out of MS flats, pairs of bolt-nuts etc complete with all material, labour, T&P. |
154 | Supply and stacking pee gravelproperly at levelled ground for measurement as directed by Engineer I/C, including all labour, T&P required for proper completion of work. |
155 | Supply & installation of 3 H.P pump set single phase electrical control panel of L&T / Havells or equivalent make for submersible pump / pumpset containing contractor relay condenser. |
156 | Supply & Installation of 3 HP outlet 50 mm dia. or more, Head 60/24, Discharge 6000/14000 LPH submersible pump of K.S.B/ CALAMA. or eqt. make including cost of labour, T&P and material required for completion of work. |
157 | Supply and fixing of 2.5 mm2 for pumpabove 1 HP and up to 3 HP. submersible cable Havelsor equivalent make, for submersible pump complete in all respect. |
158 | Supply & fixing of steel wire rope forsubmersible pump including cost of labour, T&P and material required for completion of work. |
159 | Providing and fixing 20 mm dia ISI Approved CPVCpipes complete with special such as bend, tee, socket, cross, clamp etc earth work including filling the trenches etc required for proper completion of the work. the rate also includes concealed GI fitting where required, cutting and making good the walls etc and all materials, labour and T&P complete. (CSI No. 26.20) |
160 | Providing and fixing PVC BALL FLOAT VALVE 20 mm dia. WITH BRASS & UNION COMPLETE, ISI mark heavy quality including supply of all materials, labour and T&P required for proper completion of work. |
161 | Providing and fixing PVC CONNECTION PIPE 450X15 mm WITH 2 BRASS UNITS ISI mark heavy quality including supply of all materials, labour and T&P required for proper completion of work. |
162 | S/F of Syntex or equivalent make water storage Tank including all material, labour and T&P etc. required for proper completion of the work. |
163 | Providing and fixing CP BRASS BIB COCK15 mm dia. HEAVY QUALITY ( 200gm) ( L & K and equi.) fittings, ISI mark heavy quality including supply of all materials, labour and T&P required for proper completion of work. |
164 | Providing and fixing CP BRASS Angle Valve HEAVY QUALITY( L&K or equi. ) ( L & K and equi.) fittings, ISI mark heavy quality including supply of all materials, labour and T&P required for proper completion of work. |
165 | Providing and fixing CP BRASS Piller cock HEAVY QUALITY ( L&K or equi. ) ( L & K and equi.) fittings, ISI mark heavy quality including supply of all materials, labour and T&P required for proper completion of work. |
166 | Providing and fixing of 110 mm dia PVC pipe 4 Kg/ Sq.cm forwith special such as Tee, bend, socket, elbow etc including supply of all labour,material,T & P etc complete required for proper completion of work. (CSI No. 26.18) |
167 | Providing and fixing 15 mm dia ISI Approved CPVCpipes complete with special such as bend, tee, socket, cross, clamp etc earth work including filling the trenches etc required for proper completion of the work. the rate also includes concealed GI fitting where required, cutting and making good the walls etc and all materials, labour and T&P complete. (CSI No. 26.19) |
168 | Providing and fixing first quality white glazed "European type W.C.Pan Hindustan, Cera make. size 580 mm.(Hindustan,Cera Make) with out "P" trapincluding supply of all materials,labour and T&P etc.complete. |
169 | P/F wash hand basin (26x41 c.m.) of white glazed earthen ware of Hindustan/Perry or equivalent make complete |
170 | S/F of PVC low level cistern hindustan,or equivalent make 10 liter capacity complete with all accessories including cost of All materials, labour T&Petc. Complete |
171 | Providing and fixing in position 32 mm. dia P.V.C. flush pipe. for W.C. with unions, bends etc. including supply of all materials,labour and T&P etc.required for proper completion of the work. (CSI No. 27.13) |
172 | Providing and fixing in position 32 mm. dia P.V.C.WASTE PIPE FOR WASH BASIN. including supply of all materials,labour and T&P etc.required for proper completion of the work. (CSI No. 27.14) |
173 | Providing and fixing 600 mm x 450 mm beveled edge mirror of Atul,Kiran makeglass with Indian polish 6.50 mm thick complete with back of 600 mm x 450 mm x 6 mm hard board sheet fixed to wooden cieats with C.P. brass screws and washers including supply of all materials, labour and T&P etc.required for proper completion of the work. |
174 | Providing and fixing 750 mm x 20 mm size C.P. brass towel rail of approved qualityincluding bracketsincluding supply of all materials,labour and T&P etc. required for proper completion of the work and cutting and making good the wall plaster etc. required for work. (CSI No. 27.16) |
175 | Providing and fixing soap dish chromium plated with brackets fixed to wooden cleats with brass screws including supply of all materials,labour and T&P etc.required for proper completion of the work. (CSI No. 27.19) |
176 | Providing and fixing 100 mm dia PVC "P" or "S" trap including cement concrete and all materials, labour cartage T&P etc.required for proper completion of the work.(For W.C.) (CSI No. 27.24) |
177 | Providing and fixing CI GRATING 100 mm dia includingall materials, labour cartage T&P etc.required for proper completion of the work. (CSI No. 27.25) |
178 | Providing and laying 75 mm dia SWR, PVC ( Finolex or equivalent ) pipe including cost of excavation, C.C etc including its jointing and connection, all materials, labour and T&P etc. required for proper completion of the work. |
179 | Providing and laying 110 mm dia SWR, PVC ( Finolex or equivalent ) pipe including cost of excavation, C.C etc including its jointing and connection, all materials, labour and T&P etc. required for proper completion of the work. |
180 | Providing and fixing 75 mm dia SWR, PVC ( Finolex or equivalent ) Bends including cost of all materials, labour and T&P etcrequired for proper completion of the work. |
181 | Providing and fixing 110 mm dia SWR, PVC ( Finolex or equivalent ) Bends including cost of all materials, labour and T&P etcrequired for proper completion of the work. |
182 | Providing and fixing 75 mm dia SWR, PVC ( Finolex or equivalent ) plain Tee including cost of all materials, labour and T&P etc required for proper completion of the work. |
183 | Providing and fixing 110 mm dia SWR, PVC ( Finolex or equivalent ) plain Tee including cost of all materials, labour and T&P etc required for proper completion of the work. |
184 | Providing and fixing false ceiling at all heights with integral densifiedr Armstrong false ceiling tiles of Size 595x595 x12 mm of approved texture, design and patterns having NRC (Noise Reduction coefficient) of 0.50 (minimum) as per IS 8225:1987, Light reflectance of 85% (minimum). Non combustible as per BS:476 (part-4), fire performance as perBS:476 (part 6 &7), humidity resistance of 100%, thermal conductivity < 0.043 W/m K as per ASTM 518:1991, in true horizontal level suspended on interlocking metal powder coated T-Grid of hot dipped galvanised iron section of 0.40 mm thick on Silhouette profile,rotary stiched double webbed white with 6 SUB HEAD : 26- NEW TECHNOLOGIES AND MATERIALS 1632 mm reveal profilewhite/black),comprising of main-T runners of size 15x42 mm of length 3000 mm, cross - T of size 15x42 mm of length 1200 mm and secondary intermediate cross-T of size 15x42 mm of length 600mm to form grid module of size 600 x 600 mm, suspended from ceiling using galvanised mild steel items (galvanizing @ 80 grams per sqm) i.e. 50 mm long, 8 mm outer diameter M-6 dash fasteners, 6 mm dia fully threaded hanger rod upto 1000 mm length and L-shape level adjuster of size 85x25x2 mm. Galvanised iron perimeter wall angle of size 22x19x0.40 mm of length 3000 mm to be fixed on periphery wall / partition with the help of plastic rawl plugs at 450 mm center to center and 40mm long dry wall S.S screws. The work shall be carried out as per specifications, drawing and as per directions of the Engineer-in- Charge. 26.23.1 With 12 mm thick Armstrong MiniralFobre Sound Absorbing Sheet |
185 | Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): With float glass panes of 5.5 mm thickness |
186 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever requiredincluding cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : For fixed portion Powder coated aluminium (minimum thickness of powder coating 50 micron) |
187 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever requiredincluding cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) Polyester Powder coated aluminium (minimum thickness of powder coating 50 micron)(CSI No. 28.25) |
188 | Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-incharge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.). |
189 | Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. |
190 | Supply and fixing 6mm thick polycarbonate multiwall sheet ,fixing in position with J or U bolts 10 mm. dia with G.I. Limpet & bitumen washers including supply of all materials, labour,wastage. and T&P etc. required for proper completion of the work. |
191 | PROVIDING OF 02 NOS. AIRPORT MODEL THREE SEATER BENCH FOR CONSUMERS @ 5840.00Rs/ |
192 | Providing & installation of approved make commercial water cooler of capacityof 150 Ltr./Hr. including all cost of all material, labours T&Petc required for proper completion of work . |
193 | Providing & installation of approved make commercialR.O. of capacityof 50 Ltr./Hr. including all cost of all material, labours T&Petc required for proper completion of work . |
194 | Wiring point for light with 1.5 sq. mm.FRLSH PVC insulated multistrand single core copper conductor cable in PVC conduit with 1.5 sq. mm.FRLSH PVC insulated multistrand copper conductor cable as earthwire drawn inside the conduit pipe concealed in the wall, complete with 14 SWG copper earth continuity wire,GP Box ,modular type switch & ceiling rose/ angle/batten holder on 3 mm thick phenolic laminated backelite sheet etc., complete in all respect, as directed including matching colour wash. |
195 | Wiring point for plug with 1.5 sq. mm.FRLSH PVC insulated multistrand single core copper conductor cable in in PVC conduit with 1.5 sq.mm.FRLSH PVC insulated multistrand copper conductor cable as earthwire drawn inside the conduit concealed in the wall, complete with 14 SWG copper earth continuity wire,GP Box , piano type switch and socket etc. complete in all respect including matching colour wash. |
196 | Supply and fixing of power plug with 20 Amp./250 volt flush type modular switch and 5 pin 20 A/250 volt flush type universal modular socket switch on concealed M.S box including supply of all material, labour T&P etc. required for proper completion of work. |
197 | Wiring point for fan / fesh air fan (light duty exhaust fan) with 1.5 sq.mm. FRLSH PVC insulated multistrand single core copper conductor cable in in PVC conduit with 1.5 sq.mm.FRLSH PVC insulated multistrand copper conductor cable as earthwire drawn inside the conduitconcealed in the wall, complete with 14 SWG copper earth continuity wire,GP Box , modular type switch & ceiling rose on 3 mm thick phenolic laminated backelite sheet etc complete in all respect, including matching colour wash. |
198 | Supply and wiring of submain with two number 4 sq.mm. FRLSH PVC insulated 1100 V grade multistrand single core copper conductor cable in 20 mm dia heavy guage rigid steel conduit concealed in wall, complete with one number 14 SWG copper earth continuity wire including matching colour wash etc., complete in all respect. |
199 | Supply and wiring of submain with two number 4sq.mm. FRLSH PVC insulated 1100 V grade multistrand single core copper conductor cable in 20 mm dia heavy duty (2mm thick) PVC conduit with one No. 2.5 sq. mm. FRLSH PVC insulated multistrand copper conductor cable as earth contuiity wire drawn in conduit concealed in wall, complete with one number 14 SWG copper earth continuity wire including matching colour wash etc., complete in all respect. |
200 | S/Fof 6A to 32 Amp.two pole MCB(10KA) |
201 | S/F OF Load kontakt 4 way SPN DP BOX (consumer Unit )with built in 63 Amp. SPN isolator for incoming complete in the all respects duly fixed on the angle iron frame required section as direction as per site condition. |
202 | Supply and Fixing of 3 blade ceiling fan 1200 mm of Havells or equivalent including all material, T&P etc required for proper completion of work as approved by engineer in charge. |
203 | Supply and erection of 32 Amp. TPN tap off box on rising mains complete with HRC fuses etc. complete in all respect. |
204 | S&F of 32 Amp. double pole change over switch on 25mm x25mm x 3mm angle iron frame, including the cost of labour,T&P, painting and other material required for proper completion of the work as per direction and satisfaction of Engineer in charge. |
205 | Supply and installationof LED Tube light Crompton, Bajaj & equivalent made with fitting of box / channel type T-5 energy saver without reflector & without end cover for one number 20 watt T-5 Lamp/Tube with 1x20 watt T-5 Lamp Tube complete all respect |
206 | Supply and fixing of LED Street light Fitting having die cast aluminium body and diffuser with driver set suitable for 30Watt. to 40 Watt. Confirming to IP 66 protection complete in all respect. |
207 | Supply and Fixing of 5 blade Exhaust fan ventile air dx 225 mm of Havellsor equivalent make including all material, T&P etc required for proper completion of work as approved by engineer in charge. |
208 | Supply and Fixing of 3 blade wall fan ofHavells platina 400 mm or equivalent including all material, T&Petc required for proper completion of work as approved by engineer in charge. |
209 | Supply & installation of Lift (min. size 5"8"x6") |
210 | Fire brick work (230 x 115 x 75) with 6mm thick fire cement ACC mortar in Super Structure including supply of all materials, labour and T&P etc. required for proper completion of the work.for one brick thick wall |
211 | Supply and Installation in complete respect of 2 Ton Split AC 5 star (O General, Hitachi, Daikin make ) along with 5 KVA V Guard or equivalent make stabilizers, stands, drain pipes etc including all labour and T&P and all related works as required for proper installation and running of the system complete in all respectsas approved by Engineer In Charge. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail