|
| 1 | stone aggregates 40 mm size |
| 2 | stone aggregates 20 mm size |
| 3 | coarse sand(zone IIII) |
| 4 | portland cement |
| 5 | hire charges of concrete mixer0.25 to 0.4 cum with hopper |
| 6 | vibrator ( needle type 40mm ) |
| 7 | sundries |
| 8 | laterite stone of size(35*20*20) |
| 9 | structural steel such as tees,angles,channels,and rs joists |
| 10 | red oxide zinc chromate primer |
| 11 | adjustable telescopic prop 3 m(2.02-3.75 m) |
| 12 | beam clamp 300-380 mm (450-1070) |
| 13 | wall form panel 1250*459*mm |
| 14 | corner angle 45*45*1070 mm |
| 15 | column clamp 450*1070 mm |
| 16 | prop 2 m(2-3.5m) |
| 17 | stone aggregates 10 mm nominal size |
| 18 | tewisted steel or deformed bars |
| 19 | solid blocks of size 40*20*10cm |
| 20 | second class kali wood in planks |
| 21 | second class kali wood in scantling |
| 22 | hollock ballies 125 mmm dia |
| 23 | adjustable span ESO+SI(2.35-3.4) |
| 24 | mild steel round bar above 12 mm dia |
| 25 | flats upto 10 mm in thickness |
| 26 | rawl plug 50 mm (designation 10 nos) |
| 27 | anjili wood scantls |
| 28 | bright finished or black enameled mild steel butt hinges 100*58*1.90 mm |
| 29 | bright finished or black enameled mild steel butt hinges 50*37*1.50 mm |
| 30 | bright finished or black enameled mild steel screws 40 mm |
| 31 | bright finished or black enameled mild steel screws 20 mm |
| 32 | anjili wood planks |
| 33 | float glass sheet of nominal thickness 4 mm( weight not less than 10 kg/sqm) |
| 34 | 10 mm *42mm*2mm thickfactory made door frame of pvc extruded sections in white or grey or wooden finish |
| 35 | 24 mm thick factory made shutters with styles,rails and panelsof pvc extruded sections in white grey or wooden finish |
| 36 | oxidised mild steeltower bolt (barrel type) 200*10 mm |
| 37 | oxidised mid steel screws 30 mm |
| 38 | iron hooks and eyes 100 mm |
| 39 | 200 mm aluminium aldrop3 |
| 40 | brass 100 mm mortice latch and lock with 6 levers without pair of handles |
| 41 | pair anodised aluminium handles125 mm with plate175*32 mm |
| 42 | anodised aluminium handles125 mm with plate 175*32 mm |
| 43 | chromium plated brass screws 25 mm |
| 44 | ceramic glazed tiles 1st quality 300 *300 mm in all shades and designs of white,ivory,grey,fume red brown etc |
| 45 | vitrified floor tile 60*60 cm |
| 46 | pvc pipe 110mm outer dia 6 kgf/cm2 |
| 47 | ceramic glazed tiles 1st quality min thickness 5 mm in all co;ours shades and designs except burgubdy, bottle green black |
| 48 | vitreous china orrisa type w.c pan size 580 mm |
| 49 | vitreous china flatback wash basin630*450 mm |
| 50 | 15 mm cp brass tap |
| 51 | cp brass waste 32 mm |
| 52 | ci bracket for wash basin AND sinks |
| 53 | stainless steel kitchen sink- without drain board 470*420 mm bowl depth 178 mm |
| 54 | pvc pipe 20 mm outer dia 10 kgf/cm2 |
| 55 | pvc pipe 25 mm outer dia 12 kgf/cm3 |
| 56 | pvc pipe 75 mm outer dia 4 kgf/cm4 |
| 57 | pvc pipe 32 mm outer dia 10 kgf/cm5 |
| 58 | pvc pipe 50mm outer dia 6 kgf/cm6 |
| 59 | pvc door elbow 75 mm dia |
| 60 | pvc bend 75 mm dia |
| 61 | pvc door elbow 110 mm dia |
| 62 | pvc vent cowl 75 mmdia |
| 63 | pvc bent 110 mm dia |
| 64 | brass full way valve with ci wheel 25 mm dia |
| 65 | poly ethylene water storage tank with cover and suitable locking arrangement |
| 66 | stainless steee grade- 304 hollow section round/square tubes |
| 67 | stainless steel/square bar and plates |
| 68 | fine sand ( zone IV) |
| 69 | ACRYLIC EXTERIOR PAINT |
| 70 | EXTERIOR PRIMER |
| 71 | gi pipes 40 mm dia |
| 72 | welding by electric plant |
| 73 | gi trafford profile sheet 0.35 mm thick |
| 74 | bitumen washer |
| 75 | stainless steel screws 50 mm |
| 76 | precast chequered cement tiles 22mm thick dark shade using ordinary cement |
| 77 | black colour dark shade pigment |
| 78 | stone aggregates 06 mm nominal size |
| 79 | interlocking c c paver block 60 mm thick |
| 80 | mild steel tube hot finished welded type |
| 81 | multi surface paint |
| 82 | metal primer UG |
