Tender For Supply, Installation, Testing And Commissioning Of Electro-Mechanical Equipments At Water Supply Scheme Khanpora Kreeri I And Ii Under Jjm.
Tender Value
92.85 Lakhs
Estimated cost
Bid Submission
07 Apr 2023
0 days left
EMD
1.85 Lakhs
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
kreeri → Jammu And Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Supply, Installation, Testing And Commissioning Of Electro-Mechanical Equipments At Water Supply Scheme Khanpora Kreeri I And Ii Under Jjm.
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 31-Mar-2023 | Extension Notice | Date | 07-Apr-2023 |
BOQ
| Sl. No. | Item Description |
| 1 | WSS Khanpora Kreeri Stage 1st (Adv. Cost Rs. 50,29,000/-) |
| 2 | Supply, Installation, Testing & Commissioning ofOpen Submersible Pumping Unit (verticle ) as per IS 8034for with following specification are as under :PUMP : Discharge Range = 6000-8000 GPHHead Range= 65-85 mtrsEfficiency = Not less than 50% Speed= 2900 RpmType of pump = OpenwellSubmersible Pump( Verticle )Type of fluid to be handled=Clear WaterMOTOR:-Motor Rating= 20.00 HP/as per OEMMethod ofstarting = Star – DeltaSpeed = 3000 (Sync).Frequency= 50 ± 3 % Hz Working Voltage= 380-415 ± 15% V, 03 phaseEfficiency = Not less than 90%Class of insulation=F/Suitable for above parameters Rest of Specification/Details are as per clauseof SBD |
| 3 | Fabrication, providing, fitting and lowering ofcolumn pipe conforming to IS: 1239 of length 10 Rft into the 200/ 250/300 mm casing dia. production well up to the desired depth ; The job includes Providing and welding of flanges conforming toIS: 6392, Table-17 and PN 16 Size: DN 100Class: B (Medium) Rest of Specification/Details areas per clause 7 of SBD |
| 4 | Providing/supplying and fitting ofG.I flanged Rising Main at site. The Pipe shall be hot dip Galvanized, class-B confirming to IS 1239. The job includes providing and fitting of M.S Flanges conforming to BIS 6392/1997 Table 17 (Rating PN16). Size: DN 100Class: B (Medium) Rest of Specification as per clause 8 of SBD |
| 5 | Earth work in excavation by manual means in trenches for foundation, drains, pipes, cables (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and reaming of bottom lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed. (All kinds of soil 01 meter from cutting edge) |
| 6 | Filling available excavated earth in trenches, plinth, sides of foundation etc.in layers not exceeding 20 cm in depth, consolidating each deposited layer by reaming and watering, lead upto 50 m and lift upto 1.5m. |
| 7 | Providing and laying hand packed stone soling 50 mm nominal size including filling, spreading, dressing,ramming, all leads lifts and all carriages complete. |
| 8 | Centering and shuttering including strutting , propping etc. and removal of form work for Foundation, footings, bases for columns |
| 9 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering . all work upto plinth level with 1 : 2 : 4 mix (1 cement , 2 coarse sand , 4 graded stone aggregate 20mm nominal size) |
| 10 | Fabrication, providing and fitting of washout Tee with arm length 1.2 feet each. The Tee shall be fabricated out of G.I pipe with M.S Flanges conforming to BIS 6392/1997 Table 17 (Rating PN16) fastened with weld joints on three ends. Size: DN 100Class: C (Heavy) Rest of Specification/Details areas per clause 09 of SBD |
| 11 | Providing and fitting of, Ductile Iron double flanged, non-rising spindle soft seatedglandless gate/ sluice valves as per IS14846 for regulating the water supply outside the pumping units .Size: DN100PN:1.6/16 Rest of Specification/Details areas per clause 12 of SBD |
| 12 | Providing and fitting ofDuctile Iron double flanged, Slanted seatswing check valve( NRV) as per IS 5312. Size: 100 mmPN: 1.6/16 Rest of Specification/Details areas per clause 13 of SBD |
| 13 | Providing, fitting, testing and commissioning of ARV (Air Release valve) as per IS 14845 to be fitted to G.I rising Main.Size: 50mmPN: 1.6/16Rest of Specification/Details areas per clause 14 of SBD |
| 14 | Fabrication, Providing and fitting of90-120 degree bend/elbowto be fabricated out ofG.I pipe, 1 m lengthand flanged on both ends ato make it leak proof. The flanges shall be M.S Flanges conforming to BIS 6392/1997 Table 17 (Rating PN16) and welded on both sides. The job includes nuts, bolts, gaskets etc as per site requirement.Size:DN 100Rest of Specification/Details areas per clause 15 of SBD |
| 15 | Fabrication, providing and fitting of split type MS clamps10 mm thick, 2 ft long and 3 inch wide for lowering and holding of pumping unit fitted. The job includes the cost of required size of nuts and bolts. Size: 100 mm Rest of Specification/Details areas per clause 16 of SBD |
| 16 | Fabrication of gantry mechanism/CGI Shed by way of providing Structural steel in built up sections, trusses and framed work, including cutting , hoisting , fixing in position and applying a priming coat of steel primer and 02 coats of paint of approved shade all complete welded. The drawings and Dimensions for Gantry/CGI Shedwill be provided by Site In Charge at the time of execution of jobRest of Specification/Details areas per clause 21 of SBD |
| 17 | Supply, Installation and testing of manual type triple gear chain pulley block along with mnrail geared travelling trolley y of proper specificationsCapacity =2 tonRest of specification as per cluase 24 of SBD |
| 18 | Creation of pole mounted , outdoor type Electric Sub Stationby way ofS/I/T/C of 11/0.433 KVA , 3 Phase Distribution Transformer with Bimetallic Terminal connectors Energy level -2 Aluminum woundSpecifications conforming to IS : 1180 (Part 1) 2014 with latest amendments Type of cooling:ONAN.Rating: 63 KVA HT Transformer, 3 phase (Level 2).Manufacturers certificate be apended and rest of specification as per cluase 26 of SBD |
| 19 | Providing and fittingG.I Channel /Angle/ Flat of sizes including clampsas per details in Clause 27 of SBD |
| 20 | Supply, Installation, Testing and commissioning of Polymeric Gang operated Air break switch, outdoor type, triple pole, suitable for vertical installation, complete as per IS specsRest of Specification/Details areas per clause 28 of SBD |
| 21 | Supply, Installation, Testing and commissioning of 11KVpolymer fuses SetHorn Gapas per details in Clause 29 of SBD |
| 22 | Supply, Installation, Testing and commissioning ofGapless Surgearrestor station class as per details in Clause 30 of SBD |
| 23 | Supply and fitting of 11 KV polymeric composite pin insulator as per details in Clause 31 of SBD |
| 24 | Supply, installation, errection of9 mtrs long H.T pole of specifications ST- 410 (sp-33) as per details in Clause 32 ofSBD |
| 25 | P/F of Galvanized nuts, bolts of various sizes as per site requirement.as per details in Clause 33 ofSBD |
| 26 | P/F Danger Plate with clamps as per details in Clause 34 ofSBD |
| 27 | Providing and fixing G.I Barbed wire for anti climbing/ anti climbing devices with clamps as per details in Clause 35 ofSBD |
| 28 | Providing and Fitting of PG clamps |
| 29 | Providing and fitting of Galvanized stay set complete as per details in Clause 36 ofSBD |
| 30 | Painting of poles Red oxide |
| 31 | Painting of poles Aluminum paint |
| 32 | Providing and fitting of ACSR as per details in Clause 39 ofSBD |
| 33 | Supply, Installation and Testing of 35 Sq mm XLPE Aluminum H.Tcable (ABC type ) of 11 KV grade with following specs.Size (cross sectional area in sq mm) = 3×35 with reinforced wirePhases:Red, Yellow, Blue |
| 34 | Providing and fitting of Anchoring clampsrequired for holding of 3 – Core , 35 Sq. mm H.T AB Cable as per details in Clause 40 ofSBD |
| 35 | P/F of 11 KV cable termination kit as per details in Clause41 ofSBD |
| 36 | Providing and fitting of LT Distribution box for HT transformer Capacity of transformer: 63 KVARest of Details/Technical specification are as per clause 42 ofSBD |
| 37 | Providing and fitting of PRODIGY LT Metre of following specification complete with all fixturesrequired for fitment at site Type: E3L100, 3 Phase, 4 wire Measurements offered: KWh,KVARh,KVAh,KVAVoltage : 3x240V(415v),50HZIb : 40A Imax: 200A Battery: Lithium |
| 38 | Fabrication Providing and fitting of modular control panel of appropriate size fabricated out of 14SWG sheet having required openings/vents and protection class: IP-55 and fitted with accessories MU-G30 and Rest of Details/Technical specification are as per clause 43(f) ofSBD |
| 39 | Providing, fitting, testing and commissioning ofManually operated copper wound, 3-phase, AC power supply multi step voltage stabilizer.Rating:: 50 KVA Manufacturers test certificate to be apended and rest of specification as per clause 44 of SBD. |
| 40 | Providing and Fitting of 3 /3.5/2-Core, XLPE Armoured Aluminium Cable conforming to IS: 7089 part 1st as service line from the HT transformer to control as per clause 46 of SBD. i) 50 sqmm, 3.5core, LTcable |
| 41 | Providing and Fitting of 3 /3.5/2-Core, XLPE Armoured Aluminium Cable conforming to IS: 7089 part 1st as service line from the HT transformer to control as per clause 46 of SBD.ii) 10 sqmm, 2 core, LTcable |
| 42 | Providing and fitting of 3-Core flatsubmersible copper cable conforming to IS: 694 (Part 1st) – 1964 & IS: 694 (Part 2nd) - 1964as per details in Clause 47 ofSBD Size: 16 sq.mm |
| 43 | Providing and fitting of 50 mm square single core copper cable for interconnecting various electrical gadets as per IS 694: 2010 along with thimbling as per requirement. |
| 44 | Providing and Fitting ofcable tray of suitable size for carrying the cable inside the machinery room. |
| 45 | P/I of earthing station for substation, LT panel, DG set and stabilizer comprising of company fabricated earthing electrode as per IS: 3043. Rest of Specifications/details are as per specification in clause 48 of SBD |
| 46 | Supply, installation of 6 kg co2 type fire extinguisher manufactured as per IS:15683 OF 2006 with IS mark and comply with DGMS(Approval) .Rest of details as per specification in clause 49 of SBD |
| 47 | Illumination of Premises:Providing and erection of 9 Mtr long Hot Dip Galvanized octagonal pole (single Section) with bottom 150mm, top 75mm wide, thickness 3mm with 70 Microns Zinc coating having inside arrangement for providing of power connection along with following items.1) 3 Way Terminal Connector 20 Amp.2) 3 No MCB 8 Amp. Rest of Details/Technical specification are as per clause 50 ofSBD |
| 48 | Providing, installation, testing and commissioning of area lighting 120 Watt LED (Street Light Type) on top of octagonal pole Having following specs:Input: 90-240 V 50 HzPower Factor: >0.9Rest of Details/Technical specification are as per clause 51 of SBD |
| 49 | Providing and installation of Junction Box with DP 32Amp MCB to serve as amin switch for LED lighting.Rest of Details/Technical specification are as per clause 52 of SBD |
| 50 | Providing, Installation and testing of 2KVA fully automatic voltage stabilizer Rest of Details/Technical specification are as per clause 53 of SBD |
| 51 | Supply, installation, Testing & commissioning of 1000VA Full Sine wave power inverter with 12V, 180AH Tubular inverter Battery Rest of Details/Technical specification are as per clause 54 of SBD |
| 52 | Providing, laying & fixing with adhesive/bonding material of insulation rubber mats on the floor of the pump house, covering area around electro-mechanical machinery for safeguarding the life & limb of the workmen. Rest of Details/Technical specification are as per clause 55 of SBD |
| 53 | TOOL KIT For Maintenance: -The Tool Kit for maintenance as per detailed specification in cluase 56 of SBD |
| 54 | Providing of good quality conveinence and utility items as per details in Caluse57 of SBD |
| 55 | Fabricationof7’ (L) x 6’(B) x 1.5\" (H) angle iron bedfor operators withback-height of 2 feet. The detailed drawing will be provided by site incharge. Rest of Details/Technical specification are as per clause 58 of SBD |
| 56 | Providing and fitting of 19 mm thick multilayered ply sheet of size 6 x 3 feet , 3 nos.Rest of Details/Technical specification are as per clause 59 of SBD |
| 57 | Providing of solar/ electrical lantern chargeable on both solar & electrical 220v supply. |
| 58 | Providing of bamboo ladders 18 feet long along with 15 feet long Link rods and HT Glove pair (01 No each) |
| 59 | Providing of 1 KW heat convector for operators for winter season. |
| 60 | Providing and fitting of 01 No. LED (scroll type) sign board fabricated out of stainless steel and metalRest of Details/Technical specification are as per clause 63 of SBD |
| 61 | Providing and fitting of 01 No. angle iron/sheet metal board duly painted showing various specifications of the mechanical and electrical equipments installed at site size= 7x5 feetRest of Details/Technical specification are as per clause 64 of SBD |
| 62 | Providing, installation, Testing & commissioning of 415 ±10%V (output), 3 phase Diesel Generator set as per IS 8528 (2018) and ISO 3046 (2002) for engine and IEC/IS 60034-1 for alternator suitably assembled and fitted in a pollution free acoustic enclosure / canopy of required size as per Ministry of Environment protection rule 1986 read with latest amendments.Rating: 40 KVA , Air CooledManufacturers certifice to be apended and rest of specification as per cluase 66 of SBD |
| 63 | Providing and fitting of L.T35 Sq. mm , 1core , capable to work upto 1.1 KV, XLPE insulated , galvanized steel strip armoured coppercableconforming to IS : 7089(part -1) 1988 With latest amendmentsto be fitted fromD.G Setto Modular control panelRest of Details/Technical specification are as per clause 67 of SBD |
| 64 | Providing corrugated G.S Sheet roofingand on the all sides of DG Set shed including vertical/ curved surface fixed with polymer coated J or L Hooks , bolts and nuts Rest of Details/Technical specification are as per clause 68 of SBD |
| 65 | Providing, Installation, Testing & Commissioning of complete switchgear unit for protection of D.G Setconsisting of 200A MCCB 3- pole , 415 V, 50 KV breaking capacityRest of Details/Technical specification are as per clause 78 of SBD |
| 66 | Carriage of sand, stone aggregate, stone solling by mechanical transportincluding loading , unloadingand stacking (average distance-5km) |
| 67 | WSS Khanpora Kreeri Stage 2nd (Adv. Cost Rs. 42,56,000/-) |
| 68 | Supply, Installation, Testing & Commissioning of Open WellVerticle Submersible Pumping Unitas per IS 14220for with following specification are as under :PUMP : Discharge Range = 3000-5000 GPHHead Range= 100- 120 mtrsEfficiency = Not less than 50% Speed= 2900 RpmType of pump = Openwell Verticle Submersible PumpType of fluid to be handled=Clear WaterMOTOR:-Motor Rating= 15.00 HP/ As per OEMMethod ofstarting = Star – DeltaSpeed = 3000 (Sync).Frequency= 50 ± 3 % Hz Working Voltage= 380-415 ± 15% V, 03 phaseEfficiency = Not less than 90%Class of insulation=F/Suitable for above parameters Rest of Specification/Details are as per clause 4 of SBD |
| 69 | Fabrication, providing, fitting and lowering ofcolumn pipe conforming to IS: 1239 of length 10 Rft into the 200/ 250/300 mm casing dia. production well up to the desired depth ; The job includes Providing and welding of flanges conforming toIS: 6392, Table-17 and PN 16 Size: DN 80Class: B (Medium) Rest of Specification/Details areas per clause 7 of SBD |
| 70 | Providing/supplying and fitting ofG.I flanged Rising Main at site. The Pipe shall be hot dip Galvanized, class-B confirming to IS 1239. The job includes providing and fitting of M.S Flanges conforming to BIS 6392/1997 Table 17 (Rating PN16). Size: DN 80Class: B (Medium) Rest of Specification as per clause 8 of SBD |
| 71 | Earth work in excavation by manual means in trenches for foundation, drains, pipes, cables (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and reaming of bottom lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed. (All kinds of soil 01 meter from cutting edge) |
| 72 | Filling available excavated earth in trenches, plinth, sides of foundation etc.in layers not exceeding 20 cm in depth, consolidating each deposited layer by reaming and watering, lead upto 50 m and lift upto 1.5m. |
| 73 | Providing and laying hand packed stone soling 50 mm nominal size including filling, spreading, dressing,ramming, all leads lifts and all carriages complete. |
| 74 | Centering and shuttering including strutting , propping etc. and removal of form work for Foundation, footings, bases for columns |
| 75 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering . all work upto plinth level with 1 : 2 : 4 mix (1 cement , 2 coarse sand , 4 graded stone aggregate 20mm nominal size) |
| 76 | Fabrication, providing and fitting of washout Tee with arm length 1.2 feet each. The Tee shall be fabricated out of G.I pipe with M.S Flanges conforming to BIS 6392/1997 Table 17 (Rating PN16) fastened with weld joints on three ends. Size: DN 80Class: C Heavy Rest of Specification/Details areas per clause 09 of SBD |
| 77 | Providing and fitting of, Ductile Iron double flanged, non-rising spindle soft seatedglandless gate/ sluice valves as per IS14846 for regulating the water supply outside the pumping units .Size: DN 80PN:1.6/16 Rest of Specification/Details areas per clause 12 of SBD |
| 78 | Providing and fitting ofDuctile Iron double flanged, Slanted seatswing check valve( NRV) as per IS 5312. Size: 80 mmPN: 1.6/16 Rest of Specification/Details areas per clause 13 of SBD |
| 79 | Providing, fitting, testing and commissioning of ARV (Air Release valve) as per IS 14845 to be fitted to G.I rising Main.Size: 50mmPN: 1.6/16Rest of Specification/Details areas per clause 14 of SBD |
| 80 | Fabrication ,Providing and fitting of90-120 degree bend/elbowto be fabricated out ofG.I pipe, 1 m lengthand flanged on both ends ato make it leak proof. The flanges shall be M.S Flanges conforming to BIS 6392/1997 Table 17 (Rating PN16) and welded on both sides. The job includes nuts, bolts, gaskets etc as per site requirement.Size:DN 80Rest of Specification/Details areas per clause 15 of SBD |
| 81 | Fabrication, providing and fitting of split type MS clamps10 mm thick, 2 ft long and 3 inch wide for lowering and holding of pumping unit fitted. The job includes the cost of required size of nuts and bolts. Size: 80 mm Rest of Specification/Details areas per clause 16 of SBD |
| 82 | Fabrication of gantry mechanism/CGI Shed by way of providing Structural steel in built up sections , trusses and framed work, including cutting , hoisting , fixing in position and applying a priming coat of steel primer and 02 coats of paint of approved shade all complete welded. The drawings and Dimensions for Gantry/CGI Shedwill be provided by Site In Charge at the time of execution of jobRest of Specification/Details areas per clause 21 of SBD |
| 83 | Fabrication of gravel Hooper for proper feeding of gravels to the borewell andplatform to bear the load of pumping unit, column pipes etc Rest of Specification/Details areas per clause 22 of SBDi. In stringers , treads , landings etc of stair cases including use of chequered plate wherever required , all complete |
| 84 | Providing and fitting ofM.S 4 inch hinges -6 no and M.S handle heavy -2no., Anchor bolts with nuts (M16) of 0.3 m long= 04 No. Metallic strip (350mm×50mm×3mm) = 02 No.Rest of Specification/Details areas per clause 23 of SBD |
| 85 | Supply, Installation and testing of manual type triple gear chain pulley block along with mnrail geared travelling trolley y of proper specificationsCapacity =2 tonRest of specification as per cluase 24 of SBD |
| 86 | Creation of pole mounted , outdoor type Electric Sub Stationby way ofS/I/T/C of 11/0.433 KVA , 3 Phase Distribution Transformer with Bimetallic Terminal connectors Energy level -2 Aluminum woundSpecifications conforming to IS : 1180 (Part 1) 2014 with latest amendments Type of cooling:ONAN.Rating: 25 KVA HT Transformer, 3 phase (Level 2). Manufacturers certificate be apended and rest of specification as per cluase 26 of SBD |
| 87 | Providing and fittingG.I Channel /Angle/ Flat of sizes including clampsas per details in Clause 27 of SBD |
| 88 | Supply, Installation, Testing and commissioning of Polymeric Gang operated Air break switch, outdoor type, triple pole, suitable for vertical installation, complete as per IS specsRest of Specification/Details areas per clause 28 of SBD |
| 89 | Supply, Installation, Testing and commissioning of 11KVpolymer fuses SetHorn Gapas per details in Clause 29 of SBD |
| 90 | Supply, Installation, Testing and commissioning ofGapless Surgearrestor station class as per details in Clause 30 of SBD |
| 91 | Supply and fitting of 11 KV polymeric composite pin insulator as per details in Clause 31 of SBD |
| 92 | Supply, installation, errection of9 mtrs long H.T pole of specifications ST- 410 (sp-33) as per details in Clause 32 ofSBD |
| 93 | P/F of Galvanized nuts, bolts of various sizes as per site requirement.as per details in Clause 33 ofSBD |
| 94 | P/F Danger Plate with clamps as per details in Clause 34 ofSBD |
| 95 | Providing and fixing G.I Barbed wire for anti climbing/ anti climbing devices with clamps as per details in Clause 35 ofSBD |
| 96 | Providing and Fitting of PG clamps |
| 97 | Providing and fitting of Galvanized stay set complete as per details in Clause 36 ofSBD |
| 98 | Painting of poles Red oxide |
| 99 | Painting of poles Aluminum paint |
| 100 | Providing and fitting of ACSR as per details in Clause 39 ofSBD |
| 101 | Supply, Installation and Testing of 35 Sq mm XLPE Aluminum H.Tcable (ABC type ) of 11 KV grade with following specs.Size (cross sectional area in sq mm) = 3×35 with reinforced wirePhases:Red, Yellow, Blue |
| 102 | Providing and fitting of Anchoring clampsrequired for holding of 3 – Core , 35 Sq. mm H.T AB Cable as per details in Clause 40 ofSBD |
| 103 | P/F of 11 KV cable termination kit as per details in Clause41 ofSBD |
| 104 | Providing and fitting of LT Distribution box for HT transformer Capacity of transformer: 25 KVARest of Details/Technical specification are as per clause 42 ofSBD |
| 105 | Providing and fitting of PRODIGY LT Metre of following specification complete with all fixturesrequired for fitment at site Type: E3L100, 3 Phase, 4 wire Measurements offered: KWh,KVARh,KVAh,KVAVoltage : 3x240V(415v),50HZIb : 40A Imax: 200A Battery: Lithium |
| 106 | Fabrication Providing and fitting of modular control panel of appropriate size fabricated out of 14SWG sheet having required openings/vents and protection class: IP-55 and fitted with accessories MU-G20 and Rest of Details/Technical specification are as per clause 43(E) ofSBD |
| 107 | Providing, fitting, testing and commissioning ofManually operated copper wound, 3-phase, AC power supply multi step voltage stabilizer.Rating:: 40 KVA Manufacturers test certificate to be apended and rest of specification as per clause 44 of SBD. |
| 108 | Providing and Fitting of 3 /3.5/2-Core, XLPE Armoured Aluminium Cable conforming to IS: 7089 part 1st as service line from the HT transformer to control as per clause 46 of SBD. i) 35 sqmm, 3.5core, LTcable |
| 109 | ii) 10 sqmm, 2 core, LTcable |
| 110 | Providing and fitting of 3-Core flatsubmersible copper cable conforming to IS: 694 (Part 1st) – 1964 & IS: 694 (Part 2nd) - 1964as per details in Clause 47 ofSBD Size: 16 sq.mm |
| 111 | Providing and fitting of 25 mm square single core copper cable for interconnecting various electrical gadets as per IS 694: 2010 along with thimbling as per requirement. |
| 112 | Providing and Fitting ofcable tray of suitable size for carrying the cable inside the machinery room. |
| 113 | P/I of earthing station for substation, LT panel, DG set and stabilizer comprising of company fabricated earthing electrode as per IS: 3043. Rest of Specifications/details are as per specification in clause 48 of SBD |
| 114 | Supply, installation of 6 kg co2 type fire extinguisher manufactured as per IS:15683 OF 2006 with IS mark and comply with DGMS(Approval) .Rest of details as per specification in clause 49 of SBD |
| 115 | Illumination of Premises:Providing and erection of 9 Mtr long Hot Dip Galvanized octagonal pole (single Section) with bottom 150mm, top 75mm wide, thickness 3mm with 70 Microns Zinc coating having inside arrangement for providing of power connection along with following items.1) 3 Way Terminal Connector 20 Amp.2) 3 No MCB 8 Amp. Rest of Details/Technical specification are as per clause 50 ofSBD |
| 116 | Providing, installation, testing and commissioning of area lighting 120 Watt LED (Street Light Type) on top of octagonal pole Having following specs:Input: 90-240 V 50 HzPower Factor: >0.9Rest of Details/Technical specification are as per clause 51 of SBD |
| 117 | Providing and installation of Junction Box with DP 32Amp MCB to serve as amin switch for LED lighting.Rest of Details/Technical specification are as per clause 52 of SBD |
| 118 | Providing, Installation and testing of 2KVA fully automatic voltage stabilizer Rest of Details/Technical specification are as per clause 53 of SBD |
| 119 | Supply, installation, Testing & commissioning of 1000VA Full Sine wave power inverter with 12V, 180AH Tubular inverter BatteryRest of Details/Technical specification are as per clause 54 of SBD |
| 120 | Providing, laying & fixing with adhesive/bonding material of insulation rubber mats on the floor of the pump house, covering area around electro-mechanical machinery for safeguarding the life & limb of the workmen.Rest of Details/Technical specification are as per clause 55 of SBD |
| 121 | TOOL KIT For Maintenance: -The Tool Kit for maintenance as per detailed specification in cluase 56 of SBD |
| 122 | Providing of good quality conveinence and utility items as per details in Caluse57 of SBD |
| 123 | Fabricationof7’ (L) x 6’(B) x 1.5\" (H) angle iron bedfor operators withback-height of 2 feet. The detailed drawing will be provided by site incharge. Rest of Details/Technical specification are as per clause 58 of SBD |
| 124 | Providing and fitting of 19 mm thick multilayered ply sheet of size 6 x 3 feet , 3 nos.Rest of Details/Technical specification are as per clause 59 of SBD |
| 125 | Providing of solar/ electrical lantern chargeable on both solar & electrical 220v supply. |
| 126 | Providing of bamboo ladders 18 feet long along with 15 feet long Link rods and HT Glove pair (01 No each) |
| 127 | Providing of 1 KW heat convector for operators for winter season. |
| 128 | Providing and fitting of 01 No. LED (scroll type) sign board fabricated out of stainless steel and metalRest of Details/Technical specification are as per clause 63 of SBD |
| 129 | Providing and fitting of 01 No. angle iron/sheet metal board duly painted showing various specifications of the mechanical and electrical equipments installed at site size= 7x5 feetRest of Details/Technical specification are as per clause 64 of SBD |
| 130 | Providing, installation, Testing & commissioning of 415 ±10%V (output), 3 phase Diesel Generator set as per IS 8528 (2018) and ISO 3046 (2002) for engine and IEC/IS 60034-1 for alternator suitably assembled and fitted in a pollution free acoustic enclosure / canopy of required size as per Ministry of Environment protection rule 1986 read with latest amendments.Rating: 25 KVA , Air CooledManufacturers certifice to be apended and rest of specification as per cluase 66 of SBD |
| 131 | Providing and fitting of L.T35 Sq. mm , 1core , capable to work upto 1.1 KV, XLPE insulated , galvanized steel strip armoured coppercableconforming to IS : 7089(part -1) 1988 With latest amendmentsto be fitted fromD.G Setto Modular control panelRest of Details/Technical specification are as per clause 67 of SBD |
| 132 | Providing corrugated G.S Sheet roofingand on the all sides of DG Set shed including vertical/ curved surface fixed with polymer coated J or L Hooks , bolts and nuts Rest of Details/Technical specification are as per clause 68 of SBD |
| 133 | Providing, Installation, Testing & Commissioning of complete switchgear unit for protection of D.G Setconsisting of 200A MCCB 3- pole , 415 V, 50 KV breaking capacityRest of Details/Technical specification are as per clause 78 of SBD |
| 134 | Carriage of sand , stone aggregate by mechanical transportincluding loading , unloadingand stacking (average distance-5km)Rest of Details/Technical specification are as per clause 79 of SBD |
AI Tender Summary
Tender Timeline
Mar 31, 2023
11:30 IST
Tender Published
Tender notice published.
Completed
Apr 07, 2023
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
CompletedApr 07, 2023
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedApr 08, 2023
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender