Tender For Installation Of Rigbore Tubewell With Solar Submersible Pump At Hamiltonganj Bazar
Tender Value
4.84 Lakhs
Estimated cost
Bid Submission
25 Mar 2023
0 days left
EMD
10000
Bank guarantee accepted
Document Fee
1500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
kalchini → West Bengal
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Installation Of Rigbore Tubewell With Solar Submersible Pump At Hamiltonganj Bazar
BOQ
| Sl. No. | Item Description |
| 1 | Drilling borehole by Rig machine with Odex-115 (Simultaneous driving of casing pipe) method of drilling through any kind of soil, boulder, rock etc. upto the required depth. This item includes the cost of hiring of Rig machine, Compressor, Supporting vehicle and other machinery & equipments with operators, drivers, laborers etc. Proportionate cost of drilling tools and accessories such as Hammer, Pilot bit, Reamer bit, Guide device, Guide sleeve etc. Cost of consumable materials like fuel & lubricants, electrode for welding, any other related equipment, materials and service etc. GL. To 60m |
| 2 | 60m to 100 m |
| 3 | Lowering and placing of filter assembly of required length and Extraction and partening off the casing pipe of required length. |
| 4 | Development of the tubewell by Air Compressor upto the satisfaction of EIC. It includes arrangement of all machinery, supply of fuel & lubricants, laborers, any others etc. |
| 5 | Mobilisation and transportion of the Rig machine and its accessories and others materials, etc. to the site. |
| 6 | Supply and delivery of 128 mm ID/139 mm OD MSERW fin cut pipe |
| 7 | Supply and delivery of 80mm dia x 3 m long HDPE jacketed strainer |
| 8 | Supply and delivery of Bit tube (0.67mtr. Long) for Odex-115 |
| 9 | Supply and delivery of Casing Shoe (for Odex-115) |
| 10 | Supply and delivery of Packer Assembly (for Odex-115) |
| 11 | Supply and delivery of MS TW Specials (Clamp, Cap, Bail plug, Lugs, Ring etc.) |
| 12 | Supplying fitting fixing Check valve( horizontal) G.M. tested to 21 Kg per sqcm 25 mm dia |
| 13 | Supplying, fitting and fixing bib cock or stop cock. (e) PTMT (Polytetra Bib Cock / Stop Cock ( Prayag or equivalent) |
| 14 | Supplying P.V.C. water storage tank of approved quality with closed top with lid (Black) - Multilayer 1000 lt |
| 15 | Earth work in excavationof foundation trenches or Drain in all sorts of soils ……….including removing spreading or stacking the spoils with in a leadetc.A) ( Depth not exceeding 1.50 m) |
| 16 | Earhtwork in Filling in foundation or plinth with good earth in layers not exceeding 15 cm including watering and ramming etc layer by layer complete . A)with earth obtained from excavation of foundation. |
| 17 | By carried earth |
| 18 | Single brick flat soling of picked jhama brick including rammingand dressing bed to proper level and filling joints with powdered earth or local sand . |
| 19 | Cement concrete (1:3:6) with 30m down graded shingles excluding shuttering . |
| 20 | (Page-26, It.No.-cement concrete 20mm down graded stone chips (1:2:4)excluding shuttering and reinforcement if any , in ground floor as per relevant IS codes ii) River Bazree Column-4x1.20x1.20x0.15 =0.864 |
| 21 | Ordinary cement concrete(mis 1:1.5:3) with graded stone chips (20mm nominal size) excluding shuttering and reinforcement if any , in ground floor as per relevant IS codes ii) River Bazree |
| 22 | Reinforcement for reinforced concrete work in all sorts of structure including dist. Bars,stirrups………drawing and direction of E.I.C.(JSW, SHYAM, SRMB etc) |
| 23 | 125mm th brick work with 1st class bricks in cement mortar (1:4) in ground floor |
| 24 | Hire and labour charge for providing shuttering work with centering and necessary staging upto 4m using approved stout props and thick hard wood planks of approved thickness with required bracing ……….…………etc complete(f) 25 mm to 30 mm shuttering without staging infoundation |
| 25 | (f) 25 mm to 30 mm shuttering without staging infoundation |
| 26 | Plaster (to wall , floor, celling ) with sand and cement Mortar including off or chamfering corner, b)With 10mm thick Cement plaster (4:1) |
| 27 | b)With 15mm thick Cement plaster (6:1) |
| 28 | Neat cement punningabout 1.50 mm thick in wall,dado,window sill etc. |
| 29 | Supplying, fitting & fixing 1st quality Ceramic tiles in walls and floors to match with the existing work & 4 nos. of key stones (10mm) fixed with araldite at the back of each tile & finishing the joints with white cement mixed with colouring oxide if required to match the colour of tiles including roughening of concrete surface, if necessary or by syntheticadhesive & grout materials etc. (B) Wall (i) Coloured decorative |
| 30 | Supplying fitting and fixing 15 to 18 mm thick Marbleslab/Tile in riser of step or skirting (upto 300 mm ht) over 15mm (avg) thick base of Cement mortar (1:2) laid with white cement slurry @ 4.4 kg/ Sq.m at back side of marble and jointed with white cement slurry @ 2.2 kg/ Sq.m with necessary pigments including grinding and Granite Polishing. [White cement and Pigment to be supplied by the Agency] (b) With Chawk Doongri (i) Area of each tile upto 0.3 sq.m. |
| 31 | Supplying& laying 20 mm designer chequered tiles of any shade and of approved quality as per IS: 1237: 1980 laid in patterns as directed in pavement, footpath including necessary underlay 25 mm thick average cement mortar (1:3) complete in all respect with all labour and materials [using cement slurry @ 4.4 kg/Sq.m at back side of tiles. Cement of mortar & slurry will be supplied by the Department. Border concrete if necessary to be paid separately]. |
| 32 | M.S. structural works in columns, beams etc. with simple rolled structural members (e.g. joists, angle, channel sections conforming to IS: 226, IS: 808 & SP (6)- 1964 connected to one another with bracket, gussets, cleats as per design, direction of Engineer-incharge complete including cutting to requisite shape and length, fabrication with necessary bolting, metal arc welding conforming toIS: 816- 1969 & IS: 1995 using electrodes of approved make and brand conforming to IS:814- 2004, haulage, hoisting and erection all complete. The rate includes the cost of rolled steel section, consumables such as electrodes, gas and hire charge of all tools and plants and labour required for the work including all incidental chages such as electricity charges, labour insurance charges etc. |
| 33 | (a) Priming one coat on steel or other metal surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc. |
| 34 | (A) Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary : |
| 35 | Supply & fIXing 40 mm dia GI Column pipe ( Make- TATA-M) 10 It. long both side thread including Heavy type Socket |
| 36 | Providing and fixing ofConcretesign boardas per MORD specification and drawing . Three MS Plates of 1.6mm thick, top and middle plate duly welded with MS flat iron 25mm x 5mm size on back on edges. The lower plate will be welded with MS angle iron |
| 37 | Supply and Installation of Solar submersible pump as follows (Details in Estimate)1) 2 HP Solar Submersible pump -12) 1 HP MPPT pump controller - 1 No3) 300W (144 cell) solar panel pv -3 No4) Cable & Accessories 5) Pipes and fittings (Makes Amrut, Havels, Crompton) |
| 38 | Add 18% as GST |
| 39 | Add 1% as labour cess |
AI Tender Summary
Tender Timeline
Mar 18, 2023
11:30 IST
Tender Published
Tender notice published.
CompletedMar 25, 2023
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedMar 27, 2023
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender