Tender For Annual Maintenance Incentive Kms For The Year 2023-24On Khora Age To Bhallan-Ii Road Km 0/0 To 10/865 (Sh:- Providing And Layingbusg For Correction Of Surface, Bituminous Concrete In Km. 4/00 To 6/00 And9/00 To 10/860 And Edge Line)
Tender Overview
Project Description
Annual Maintenance Plan (Incentive) For The Year 2023-24 On Khora Age To Bhallan Ii Road Kilometre0-0 To 10-862 Providing And Laying Busg For Correction Of Surface Bituminous Concrete In Kilometer 4-0 To 6-0 And 9-0 To 10-860 And Edge Line
BOQ
| Sl. No. | Item Description |
| 1 | Providing, laying and rolling of built-up spray grout layer over prepared base consisting of a two layer composite construction of compacted crushed coarse aggregates using motor grader for aggregates. Key stone chips spreader may be used with application of bituminous binder ( VG-10) after each layer and with key aggregates placed on top of the second layer to serve as a base, conforming to the line, grades and cross-section specified, the compacted layer thickness being 75 mm( Seventy five Millimetre ) as per MORTH Specification Clause 506with bitumen VG-10 includind hauling carriage of all labour and equipments and material to various locations through all modes of transports within all leads and liftsof material completeas per entire satisfaction & direction of Engineer-in-Charge.(Bulk Bitumen ) |
| 2 | Providing andLaying tack coat with Bitumen emulsion (RS-I) using emulsion distributor at the rate 0.25 to 0.30 kg (Zero point two five to zero point three zero Kilogram ) per Square metre on the prepared dry and hungry bituminous surface cleaned with hydroulic broom as per MORTH specification clause 503. including hauling carriage of all labour and equipments and material to various locations through all modes of transports by mechanical means within all leads and liftsof material completeas per entire satisfaction & direction of Engineer-in-Charge. |
| 3 | Providing and laying bituminous concrete 30 mm(Thirtymilimetre) thickwith 100-120 TPH batch type hot mix plant producing an average output of 75( seventy five) tonnes per hour using crushed aggregates of specified grading- II ,13 mm(Thirteen milimetre) nominal sizepremixed with bitumen VG-10 @ 5.4 to 5.6( five point four to five point six) percent of weight of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MORTH specification clause No. 509 complete including profile correction layer and patching of pot holes in all respects including hauling carriage of all labour and equipments and material to various locations through all modes of transports by mechanical mean within all leads and liftsof material completeas per entire satisfaction & direction of Engineer-in-Charge.(Bulk Bitumen ) |
| 4 | Providing and laying of hot applied thermoplastic compund 2.5 mm (two point five milimetre)thick including reflectorising glass beads @250 (two hundred fifty)gms per sqm area, thickness of 2.5 mm(two point five milimetre) is exclusive of surfce applied glass beads as per IRC:35. The finished surfce to be level, uniform and free from streaks and holes. including haulage/carriage of all labour equipments and materials to various locations through all modes of transportations in all leads and lifts to the entire satisfaction as per direction ofEngineer-in-charge. |
AI Tender Summary
Tender Timeline
Tender Published
Tender notice published.
CompletedBid Submission Deadline
Online submission via eProcurement portal.
CompletedBid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender