|
| 1 | B/R PORTIONExcavation over areas n.exc 1.5m deep & getting out soft/loose soil complete all as specified and directed. |
| 2 | M&L forhard core of gauge n.exc 63mm, deposited, spread and levelled in layers n.exc 15cm thick broken stone, water and well rammed to a true surfaces complete all as specified and directed. |
| 3 | M&L for PCC 1:3:6 type C-2 (using 40mm graded stone agg) as in foundation, filling and mass concrete complete all as specified and directed. |
| 4 | M&L for PCC 1:2:4 type B-2 (using 40mm graded stone agg) as in foundation, filling and mass concrete complete all as specified and directed. |
| 5 | Use and waste of formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter complete all as specified and directed. |
| 6 | M&L for rendering 15mm thick plaster in CM 1:6 on fair faces of brick or concrete work finished the surface even and smooth without using extra cement complete all as specified and directed. |
| 7 | Removing excavation material n exc. 50m & deposited where directed at a level n exc. 1.5m above the starting point complete all as specified and directed. |
| 8 | S&F Non skid ceramic colour floortiles 7 to 8mm thick (Square/rectangular) area of each tile exceeding 0.11 sqm but n.exc 0.18 sqmin floors etc with 15mm thick screed bed or bedding layer of mortar for laying floor finishes in CM (1:6), set and jointed in neat cement slurry and pointed in coloured cement complete all as specified and directed. |
| 9 | M&L for Glazed ceramic colour tiles in vertical surface 350x 250x 7 mm/ 450X 300X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over and including 10mm thick CM (1:4) backing coat complete all as specified and directed. |
| 10 | Taking down Chowkhat or frames not exceeding 1.5 Sqm each with shutters(Without taking off shutters from the frames complete all as specified and directed. |
| 11 | S&F Solid PVC Door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with M.S. square tube complete all as specified and directed. |
| 12 | Material and labour factory made solid panel PVC door shutter, 30 mm thick (style) consisting of frame made out of MS tubes for top and bottom rails, MS frames shall be covered with heat moulded plain colour PVC \"C\" channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles plain colour PVC sheets for top rail, lock rail and bootom rail on either side and as gap insert for top rail and bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame, welded/sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement, supplying and fixing in the frame at site with three nos of MS higes medium grade complete all as specified and directed. |
| 13 | S&F MS butt hings medium weight cold rolled 100mm size complete all as specified and directed. |
| 14 | S&F 150 mm long aluminium anodised tower bolts complete all as specified and directed. |
| 15 | S&F 100mm long aluminium anodised handles cast copper complete all as specified and directed. |
| 16 | S&F for CP health faucet with stand 1.5mtr flexible lead including two way brass CP angle stop cock 15mm dia complete all as specified and directed. (Make:Prayag or equivelent)CP Health Faucet with 1 mtr metalic Expandable tube & hook complete all as specified and directed and as approved by Garrison Engineer. |
| 17 | S&F in repairs 15mm dia stop cock fancy type and chromium plated screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipes or for Unions and fixedcomplete all as specified and directed. |
| 18 | S & F Florentine three in one wall mixer with hand shower complete all as specified and direcated and approved by GE. (Make- Jaquar and equivalent as approved by Garrison Engineer). |
| 19 | S&F in repairs one piece EWC with duroplast slim seat cover and twin flush fittings 665 x 355 x 750 mm (snow white) S trap 300mm and fittings complete all as directed and approved by GE (Make Cera and cat No S1013142 and equivalent as approved by Garrison Engineer). |
| 20 | S&F in repairs Ceramic wall Hung wash basin, glossy and polished finish/wall hung/ wall mounted bathroom sink/ super white colour round shape 550 x 440x 135 mm with coupling and waste pipe complete all as specified and directed and as approved by GE (Make Cera and equivalent) |
| 21 | S&F in repairs for 15mm dia of pipe bib taps cast copper alloy, fancy type, chromium plated with crutch or butterfly handle screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed. |
| 22 | S&F in repairs CP Central hole basin mixer fancy type 15mm dia all as specified and directed and as approved by GE. |
| 23 | S & F 6 mm thick frameless Oval Bevelled Mirror, Edges grounded, size 24 x 26 inches complete all as specified and directed and approved by GE (Make : Saint Gobain or equivalent as approved by Garrison Engineer) |
| 24 | S & F in repair Stainless steel 24 inch wall mounted shower with Arms, mirror polished finish and square in size with complete fittings, complete all as specifed and directed . |
| 25 | S&F in repairs 600mm long tubular towel rail brass chromium plated 20mm dia, D type 60cm longfixedwith two plugs (Gutties) of 2nd class hard woodembeded in cement mortor 1:3 with MS screws complete all as specified. |
| 26 | S&F CP toilet paper holderfixed to walls complete all as specified and directed and as approved by Garrison Engineer. |
| 27 | S&F glass shelf with 12mm thick desher glass incl CP brackets with brass nuts 300mm long complete all as specified and directed. |
| 28 | Taking upor down steel tubing and connections including cleaning for refixing with all fittings for 20 mm bore GI tubing complete all as specified and as directed. |
| 29 | Taking up or down steel tubing 15mm bore and connection including cleaning for refixing or removal to store complete all as specified and as directed. |
| 30 | S&F 20mm bore GI water tubing medium grade laid in floors or fixed in wall with GIfittings complete all as specified and as directed. |
| 31 | S&F15mm bore GI water tubing medium grade laid in floors or fixed in wall with GIfittings complete all as specified and as directed. |
| 32 | Taking down cement plaster on brick walls including raking out joints hacking for key, scrubbing down with water etc complete all as specified and as directed. |
| 33 | M&L for applying two coats of oil bound distemper over one coat of primer over a coat of 3mm thick wall care putty on new plastered surfaces of walls including preparation of newsurface complete all as specified and directed. |
| 34 | Taking down PVC/AC/Salt glazed warepipes and fittings upto 75mm complete all as specified and as directed. |
| 35 | S&F of PVC (SWR) 75 mm dia pipe complete all as specified and as directed. |
| 36 | S&F vitreous China Urinal, Half stall sensor based type, white (excluding flushing cistern, flush pipe)including taking down old ) , white, complete including providing and fixing plugs, bedding urinalagainst wall in cement mortar 1:2, securing urinal to plugs with and including 60 mm long brass screws, pointing around urinal back with grating and union for discharge pipeand waste pipe complete all as specified and as directed. (Make : CERA, Item Code 113692077 or equivalent as approved by Garrison Engineer) |
| 37 | Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 m in depth, for foundation etc or for shafts,wells, cesspits, manholes etc not exceeding 10 sqm on plan and not exceeding 1.5 m in depth and getting out in soft/loose soil complete all as specified and as directed. |
| 38 | M&L Cement concrete Type D2 1:4:8 (40 mm graded stone aggregate in foundations, filling and mass concrete complete all as specified and as directed. |
| 39 | M&L for mild steel TMT bars 10mm dia and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed. |
| 40 | All same as per item No 39 here-in-before but 5mm dia and over and including 10mm dia in stirrups spacers and binders complete all as specified and as directed. |
| 41 | M&L for brick work with sub class \"B\" bricks straight or curved in plan exceeding 6 mtr mean radius built in CM(1:4) using old size bricks complete all as specified and as directed. |
| 42 | M&L rendering 15 mm thick in CM(1:4) on fair faces of brick work or concrete surfaces of wall of any description, and finishing the surfaces even and smooth without using extra cement complete all as specified and directed. |
| 43 | M&L providing precast cement concrete louvers and jalies, 30mm thick (measured solid), type B-0 (12.5mm graded stone agg) including moulding but excluding frame and set in CM (1:4) complete all as specified and as directed. |
| 44 | M&L for RCC (1:1.5:3) type A-1 using 20mm graded stone aggregate as in band, coping, bed plate, benchingetc including slightly rounded of chamfered angle, throating, etc complete all as specified and as directed. |
| 45 | Formwork to sides and soffits of floor or roof beams, beam haunch ings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc complete all as specified and as directed. |
| 46 | M&L for preparation of new surfaces & applying two coats cement base paint over a coat of primer complete all as specified and directed. |
| 47 | Returning filling in including spreading ,levelling,watering and well ramming in layers not exc. 25cm in soft/loose soil complete all as specified and directed. |
| 48 | Disamantling wall and ceiling boards (fibre, pulp, insulation, etc.) any thickness including cover fillets complete all as specified and directed. |
| 49 | Dismantling timber scantlings 40 sqcm and over in section, in unframed work any position complete all as specified and as directed. |
| 50 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. |
| 51 | S&F Non skid ceramic floor colour tiles of 7 to 8mm thick (Square/rectangular) area of each tile exceeding 0.18 sqm but n.exc 0.36 sqmin floors etc with 15mm thick screed bed or bedding layer of mortar for laying floor finishes in CM (1:6), set and jointed in neat cement slurry and pointed in coloured cement complete all as specified and as directed. |
| 52 | M&L for second class hardwood as in scantlings clean sawn timberfixed complete all as specified and as directed. |
| 53 | M & L for plain fillets, square, rectangular or triangular in section clean sawn, secured with nails 2nd class hard wood exc 13and n.exc 25 sqcm complete all as specified and as directed. |
| 54 | S & F for4 mm thick of size 600x600mmHSPC (high pressure Steam Cured) pre-Painted self embossed, textured designer boardE-Board Classic to be fixed Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre. fixed in ceiling flat or Sloping complete all as specified and as directed. |
| 55 | S&F for5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawing complete all as specified and directed. |
| 56 | M&L for Solid PVC Wall Lining consisting of 5mm thick Plain or coloured with wood grains printed PVC sheet inclusive of solvent cement and fixing at site on PVC frame complete all as specified and as directed. |
| 57 | S&F anodised aluminium powder coated any colour frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and as directed. |
| 58 | S & F for aluminium Window and ventilator shutters, without sash bars, aluminium sections weighing 0.55 Kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc complete all as specified and as directed. |
| 59 | S&F Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples and fixed with tinned tacks or galvanised wire staples all as directed by Engineer- in -Charge. |
| 60 | S&F Sheet glass 4.8mm thick clear/sun shade colour glass, ordinary quality and glazing with oil putty in squares exceeding 0.5sqm in each pane complete all as specified and as directed. |
| 61 | S&F in repairs CP Health Faucet with 1 mtr metalic Expandable tube & hook complete all as specified and directed. |
| 62 | S& Fcast iron P or S trap of 100mm dia complete all as specified and as directed. |
| 63 | S& F in repairs 600 mm x 450 mm bevelled edge mirror of selected quality glass, mounted on 6 mm thick AC building board or commerical plywood and fixed to wooden plugs with chromium plated brass screws and cup washers fancy type as approved by Garrison Engineer |
| 64 | S & F CP towel ring of PTMTfixedwith and including chromium plated brass screws and wooden/plastic cleats (minimum weight 90gms) complete all as specified & directed |
| 65 | S&F in repairs vitreous china fancy wash basin, size 550 x 400mm white including brackets, and waste coupling & pipe of 32mm dia, brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other and fixed as approved by Garrison Engineer. |
| 66 | S&F in repair soap dish chromium plated stell/stainless steel, approx size 160x160mm x 1mm thick, fixed to walls with plugs & CP brass screws complete all as specified and directed. |
| 67 | S&F grating down 100mm dia with waste hole of PTMT (Min wt 25 gms) complete all as specified and as directed.. |
| 68 | M&L for preparation of newwooden fillets surfaces and wood based surfaces of any description not exc 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink wood primer in tint complete all as specified and as directed. |
| 69 | M&L for preparation of newsurface of wood and wood based material of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink wood primer on new surfaces complete all as specified and as directed. |
| 70 | M&L brick work with sub class \"B\" bricks straight or curved in plan exceeding 6 mtr mean radius built in CM(1:6) using old size bricks complete all as specified and as directed. |
| 71 | M&L PCC (1:2:4) type B-1 using 20mm graded stone aggregate as in band coping bed plate, benchingetc including slightly rounded of chamfered angle, throating, etc complete all as specified and as directed. |
| 72 | M&L formwork to roughly finished surface of concrete to soffits of suspended slabs such as roof slabs,floor slabs ,landings and similar work complete all as specified and directed. |
| 73 | M & L cement concrete 75mm thick type C2 (1:3:6) using (40 mm graded aggregate) as in sub base complete all as specified and as directed. |
| 74 | M&L for Chequered cement concrete tiles any size thick,set, jointed with grey cement and pigment and pointed in neat cement slurry in floors over 15 mm thick screed bed in CM 1:6 complete all as specified and directed. |
| 75 | Demolition of brick work or stone/boulder masonary built in cement mortor including all quoins,arches,pillars etc complete all as specified and as directed. |
| 76 | Demolition of unreinforced cement concrete in ground floor and paving not exceeding 15 cm thick (below or above ground level) complete all as specified and as directed. |
| 77 | M&L brick work with sub class \"B\" bricks straight or curved in plan exceeding 6 mtr mean radius built in CM(1:4) using old size bricks retrieved from item No78 here-in-before (Except Bricks) complete all as specified and as directed. |
| 78 | M&L for PCC 1:3:6 mix, type C-2 (using 40mm graded stone agg) as in surface channel or drain concrete complete all as specified and directed. |
| 79 | Extra for forming fair finished drain or channel 30 cminner girth in cement concrete, using extra cement including forms moulds, mitred/stopped ends complete all as specified and as directed. |
| 80 | M&L for rendering 15mm thick plaster in CM 1:4 on fair faces of brick or concrete work finished the surface even and smooth with integral water proofing compound complete all as specified and as directed. Note :- WPC will be measured & paid separately. |
| 81 | Supply only integral water proofing compound (ISI marked) complete all as specified and as directed. |
| 82 | Surface dressing n exc 15 cm deep in soft / loose soil complete all as specified and as directed. |
| 83 | M & L cement concrete 100mm thick type C2 (1:3:6) using (40 mm graded aggregate) as in sub base complete all as specified and as directed. |
| 84 | M&L forming dummyjoint 65 mm deep 10 mm wide saw cut filled with seling compound grade A complete all as specified and as directed. |
| 85 | M&L sand cushioning 50 mm thick including watering and consolidation for laying interlocking blocks complete all as specified and as directed. |
| 86 | M&Lfor 60 mm thick precast PCCinterlocking coloured paver rubber moulded block factory made of grade M 40 single layer monolithic high density manufactured by electro vibro hydraulically operated block making maching conforming to IS -15658- 2006 laid and jointed oversand cushion layer with grey cement and pigmentcomplete all as specified and directed. Note : Sand cusion shall be measured & paid separately |
| 87 | Excavation over areas exc 1.5m deep & n.exc 3 m deep and getting out in soft/loose soilcomplete all as specified and directed. |
| 88 | Excavation over areasexceeding 3m deep but not exceeding 4.5m deep and getting out in soft/ loose soil all complete all as specified and as directed. |
| 89 | M&L for loose filling with broken bricks aggregate of gauge 80 to 150mm in soakage pits, soakage wells complete all as specified and as directed. |
| 90 | M&L for loose filling with broken bricks aggregate of gauge 40 to 80mm in soakage pits, soakage wells complete all as specified and as directed. |
| 91 | M & L for RCC M-20 (Nominal Mix) Type A1, 1:1 1/2:3 (20 mm agg)in foundation, column footing, including rafts, foundation beams and plinth beam complete all as specified and as directed. |
| 92 | M & L for RCC M-20 (Nominal Mix) Type A1, 1:1 1/2:3 (20 mm agg) in column. Piers, pillars, posts and struts complete all as specified and as directed. |
| 93 | M & L for RCC M-20 (Nominal Mix) Type A1, 1:1 1/2:3 (20 mm agg) in beams complete all as specified and as directed. |
| 94 | S&F PVC (SWR) 75mm dia single socketed in any length with rubber ring joints laid in trenches or in floor complete all as specified and as directed. |
| 95 | S&F PVC (SWR) 75mm dia vent cowl complete all as specified and as directed. |
| 96 | Material and labour for brickwork in cement mortar 1:4 with sub class `B\" bricks in one brick thick honey comb walling etc complete all as specified and as directed. |
| 97 | M&L Precast RCC (1:2:4) type B-1 in manhole/soack well/septic tanks slabs/covers etc including necessary form work complete set in cement mortar 1:4 complete complete all as specified and as directed. |
| 98 | M&L for DWCPE (SN8) 150 mm (ID) diameter Pipes laid in trenches complete all as specified and directed. |
| 99 | M&L for Concrete bed to drain pipes including packing under, and haunching against the sides of pipes after they are laid and tested; in cement concrete 1:3:6 type C2 complete all as specified and as directed. |
| 100 | M & L for formwork to sides of square, rectangular or polygonal pillars, posts, columns,struts and piers for rough finished surface of concrete complete all as specified. |
| 101 | M & L for formwork to sides of RCC / PCC bands in circular walls horizontal or sloping and similar work for rough finished surface of concrete complete all as specified. |
| 102 | Material and labour Reinforced cement concrete (Nominal Mix) in cement concrete 1:1 1/2:3 type A1 using 20mm graded stone aggregate as in cover slabs of drains, manholes, septic tanks, soakage wells etc. complete all as specified & as directed by Engineer-in-charge.Note: - Reinforcement shall be measured and paid for separately. |
| 103 | Cutting into existing manhole/soakwell/septic tank making good to pipe and benching cutting out existing benching for and forming branch channel (half round or ¾ section) in cement concrete 1:2:4 type B-1 smooth finished and reforming benching as required for internal dia size 150mm complete all as specified and as directed. |
| 104 | M&L 25 mm thk PCC 1:2:4 type B-1 using20mm graded stone agg as in leveling course complete all as specified and as directed. |
| 105 | E/M PortionTaking down carefullycopper/ aluminium point wiring (light, fan, socket or power) complete, including fitting & fixtures such as switches with board, ceiling roses, pendents, bell/ buzzer, bell push, lamp holders, regulators, sockets, light fittings etc., removing material from site and making good to the disturbed surfaces of walls, ceiling,floors etc. including making good the disturbed surfaces and paint touch up to match with the existing surface complete all as specified and as directed. |
| 106 | M&L for Point wiring complete with two runs of 1.5 sqmm single core PVC insulated FR-LSH cable1100 volts grade with multi-stranded copper conductors, drawn throughand including PVC double locked Casing & caping including provision of 1.5 sqmm, FR-LSH, PVC insulated copper cable as earth continuity conductor connected to common earth dolly, including PVC rectagular box for mounting switches / sockets / regulators etc. with 3 mm thick plastic laminated sheet cover of suitable size as required at sitecomplete all as specified and as directed. Make:- Richa/Havells/RR KabelMake of caping/casing & PVC boxes :- Prestoplast/Finolex/supreme |
| 107 | Onelight/Fan pointcontrolled by one, one way switch . |
| 108 | OneExh/Ceiling fan pointcontrolled by one, one way switch . |
| 109 | One 3 pin socket outlet 5 Amps on the same board with other switches. |
| 110 | One 3 pin socket outlet 5 Amps on the Independent board. |
| 111 | All as per item No 106 here-in-before but with 2.5 Sq mm for 3 pin 15 Amps socket point controlled by one switch on independent board and 2.5 Sq mm copper conductor green in colour as earth continuity conductor connected to common earth dolly complete all as specified and as directed. |
| 112 | M&L for Switch piano flush type single pole, one way 5A complete all as specified and as directed. Make:- Havells/Legrand/Anchor |
| 113 | M&L for Socket outlet, 2 in 1, 3 pin 5A flush type complete all as specified and as directed. Make:- Havells/Legrand/Anchor |
| 114 | M&L Switch socket combination 2 in 1, 5A, 3 in 1 flush type complete all as specified and as directed.Make:- Havells/Legrand/Anchor |
| 115 | M&L Switch socket combination 2 in 1, 5A/16A, 5 in 1 flush type complete all as specified and as directed.Make:- Havells/Legrand/Anchor |
| 116 | M&L for ceiling rose 3 terminal PVC/Polycarbonate isolated body complete all as specified and directed. Make:- Havells/Legrand/Achor |
| 117 | M&L for stepped type electronic fan regulator 100 watt socket size flush type on the existing phenolic laminatied sheet etc complete all as specified and as directed. Make :Anchor/Plaza/SSK |
| 118 | M&L for sub main wiring with two runs of4 Sq mm and one run of 4 Sq mm for earth wire with multi standard copper conductors, 1100 volts grade, drawn throughand including PVC double locked Casing & caping including complete all as specified and as directed. NOTE:- two runs of 4 Sq mm + one run of 4 Sq mm and one run of PVC casing & capping and its accessories of suitable size shall be measured as one unit length.Make:- Richa/Finolex/RR KabelMake of caping/casing :- Prestoplast/Finolex/supreme |
| 119 | Supply and fixing LED luminaire 600 mm x 600 mm, 40 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and directed.reaves Cat Part No : CCS-102-20-SL-DP-NWH/Bajaj/Philips |
| 120 | Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250m complete all as specified and directed. Make : Bajaj/CG/Havells |
| 121 | Supply and fixing for Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB complete all as specified and directed. |
| 122 | S&F for LED tube light 20 Watt wall /surface mounted, integrated type with all accessories internally prewired and including connecting up with and including twin/three core twisted flexible copper conductor cable of suitable size in & incl flexible hose from ceiling rose to fitting complete all as specified and as directed.Make : Havells/Crompton/Bajaj/Philips |
| 123 | M&L for 10 Watt LED, 2\", Wall mounted decorative ultra slim square profile LED lighting fixture with extruded polycarbonate, environmental friendly, energy efficient ready to use pack complete all as specified and as directed. Make : Havells/Crompton/Bajaj/Philips |
| 124 | Supply and fix electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc complete all as specified and as directed.Make Havells/Bajaj/Crompton |
| 125 | Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250 mm complete all as specified and as directed. Make Havells/Bajaj/Crompton |
| 126 | Taking down carefully the existing ceiling fan and connecting up including provision of cable from ceiling rose or connector to fan completion of panelling works complete all as specified and as directed.Make : Havells/Bajaj/Philips/CG |
| 127 | Supply and laying under ground XLPE insulated PVC sheathed (Heavy duty) armoured 1100 volts grade aluminium conductor cable of size 95 Sqmm 3.5 core laid in trenches as per IS 7098 (Part I) including connection cable glands, aluminium lugs etc including taking down unservicable cable complete all as specified and as directed.Note : Earth work, brick protection and sand cushioning and GI Pipe will be measured and paid separately under respective item. |
| 128 | Supply and laying under ground XLPE insulated PVC sheathed (Heavy duty) armoured 1100 volts grade aluminium conductor cable of size 70 Sqmm 3.5 core laid in trenches as per IS 7098 (Part I) including connection cable glands, aluminium lugs etc including taking down unservicable cable complete all as specified and as directed.Note : Earth work, brick protection and sand cushioning and GI Pipe will be measured and paid separately under respective item. |
| 129 | Materials and labour for sand filling around the cable with approved quality coarse sand for sand cushioning of Under ground cableincludingspreading and punning down to 23cm thickness complete all as specified and as directed. |
| 130 | Materials and labour for brick protection cover to underground cables with sub class ‘B’ over burnt brick of size 23 X 11.5 X 7.5 cm, (locally available best quality), laid dry and flat abutting each other with gaps not exceeding 10mm complete all as specified and as directed. |
| 131 | Supply and fixing ON LOAD change over switch 415V in sheet metal enclosures 4 pole of capacity 125 Amps complete all as specified and as directed. |
| 132 | Materials and labour for earthing complete with galvanised iron earth plate electrode 600 mm x 600 mm x 6 mm thick, burried directly and preferably vertically in ground, earth pit not less than 2.25 Mtr deep below ground level with top edge of the plate not less than 1.5 m below ground level connetced with galvanised strip 32x6mmby means of nuts, bolts, check nuts and washers made of galvanised iron or steel earthing lead to be protected by galvanised iron pipe of 40mm bore (light grade) and other end connected to earthing test point or lightening arrestor or main controlling switch as directed including providing funnel with 20mm bore galvanised iron pipe (medium grade), wire mesh, charcoal or coke and common salt in alternate layer of 15cm (compacted thickness) all round the earth electrode, concrete earth pit in PCC (1:3:6) type C-1 (with 20mm graded aggregate), 50mm thick precast RCC (1:2:4) cover slab (re-inforced with 8mm dia TMT bar @ 15 cm C/C bothways and suitable handle made of 10mm dia) including necessary earth work in excavation, returning filling and removal of surplus earth upto a distance not exceeding 50 m etc all as shown on electrical plate No. 3 of MES Schedule Part-I(2009) complete including testing on completion all as specified and as directed. |
