Public Administrative Department Local Bodies Closing in 0 days TDR #36850960

Tender For Construction Of Administrative Building Phase 1St For Muncipal Council Sillod At Survey No. 4 At Sillod Tq. Sillod

Issued by Local Bodies · sillod, Maharashtra
Tender Value
19.55 Crore
Estimated cost
Bid Submission
31 Mar 2023
0 days left
EMD
9.78 Lakhs
Bank guarantee accepted
Document Fee
3540
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
sillod → Maharashtra
EMD Exemption
Not Available
Quantity
Not Available

Project Description

Construction Of Administrative Building Phase 1St For Muncipal Council Sillod At Survey No. 4 At Sillod Tq. Sillod

BOQ

Name of Work:CONSTRUCTION OF ADMINISTRATIVE BUILDING (PHASE-I) FOR MUNCIPAL COUNCIL SILLOD AT SURVEY NO. 4 AT SILLOD TQ. SILLOD
Sl. No. Item Description
1Clearingandgrubbingroadlandincludinguprootingrankvegetation,grass,bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposalofunserviceablematerialsandstackingofserviceablematerialtobeusedor auctioned up to a lead of 1000 metres including removal and disposal of top organic soil not exceeding 150 mm in thickness.
2Excavationforfoundationinearth,soilofalltypes,sand,gravelandsoftmurum, including removingtheexcavatedmaterialuptoadistanceof50m.beyondthe buildingareaand stackingandspreadingasdirected,dewatering,preparingthebed forthefoundationand necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.5 m.) By Mechanical Means
3Excavationforfoundationinhardmurum includingremovingtheexcavatedmaterial upto distanceof50metresbeyondthebuildingareaandstackingandspreadingas directed,dewatering, preparing the bed for the foundation and necessary back filling,ramming, wateringincludingshoringandstruttingetc.complete.(Liftupto 1.50m)ByMechanical Means
4Excavation for foundation in hard murum and boulders including removing the excavated material up to a distance 50 metres, beyond the building area and stacking and spreading as directed,dewatering,preparingthe bed forthe foundationand necessary back filling,ramming, watering including shoring and strutting etc. complete.(Liftupto1.5m.)By Mechanical Means
5ExcavationforfoundationinSoftrockandoldcementorlimemasonryfoundations includingremovingtheexcavatedmaterialuptoadistanceof50metresbeyondthe buildingareaandstackingasdirected,includingdewatering,preparingthebedforthe foundationandnecessarybackfillingwithavailableearth/murum,ramming,watering including shoring and strutting etc. complete (lift upto 1.5m)By Mechanical Means
6Excavation forfoundation inHard rockbychiselling,wedging,linedrilling,etc. including trimming and levelling the bed, removing the excavated material upto a distance of50metresbeyond the building area stacking as directed, dewatering and back fillingwithavailable earth/ murum watering, ramming etc. complete. (Lift upto 1.5 m).By Mechanical Means
7Conveyingmaterialsobtainedfromroadcuttingincludingalllifts,layinginlayersof 20cm to 30cm. breaking clods, dressing to the required lines, curves, grades and section, wateringand compacting to not less than 97% of standard Proctor density for a lead of over50m.to300m.inclusivefromthesiteofexcavationtothesiteofdepositionas directed.
8Providing preconstructional antitermite treatment as per I.S. 6313 (Part-II) by treating thebottomsurfaceandsidesofexcavationattherateof5litresofemulsion concentrateof1.0percent of chlorophyrifos per square meter of surface area covering10yearsguaranteeon bond paper.
9Providing preconstructional antitermite treatment as per I.S. 6313 (Part-II) by treating the top surfaceofplinthfillingattherateof5litresofemulsionconcentrateat1.0 percent ofclorophyrifos per OneSquareMetreofsurfaceareacoveringtenyears guarantee on bond paper.
10Fillinginplinthandfloorswith approved excavatedmaterialin15cm.to20cm. Layers including watering and compacting etc. complete.
11Filling in plinth and floors with contractorsmaterial/brought from outside and approved byEngineer inchargein layers of 15 cmto 20 cm including watering and compactionetc. complete.
12Providing solingusing 80 mmsize trap metal in 15 cm. layer including filling voidswith Crushed sand/grit, ramming, watering etc. complete.
13Providing and laying Cast in situ/ReadyMix cement concrete in M-10 of trap/ granite/quartzite/ gneiss metal for foundation and bedding including bailing out water, Steelcentering,formwork,laying/pumping,compacting,rougheningthemif special finish is to be provided,finishingifrequiredandcuringcomplete,withfully automatic micro processorbasedPLCwithSCADAenabledreversibleDrumType mixer/concrete Batch mix plant (Pan mixer) etc. complete.With fine aggregate (Crushed sand VSI Grade)
14Providing and laying Cast in situ/Ready Mix cement concrete M-25 of trap / granite/quartzite/ gneiss metal for R.C.C. work in foundations likeraft, strip foundations,grillage and footings of R.C.C. columns and steel stanchions etc. including bailing out water,Steel centering,formwork,coverblocks,laying/pumping, compaction and curingrougheningthesurfaceifspecialfinishistobeprovided (Excluding reinforcementand structural steel) etc. complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade)
15Providing and laying Cast in situ/Ready Mix cement concrete M-25 of trap / granite/quartzite/ gneiss metal for R.C.C. columns as per detailed designs and drawingsoras directedincludingsteelcentering,formwork,coverblocks, laying/pumping, compactionfinishingtheformedsurfaceswithcementmortar1:3of sufficient minimum thickness to give a smoothand even surface or roughening if special finish is to be providedand curing etc. complete,(Excluding reinforcement and structural steel).withfully automaticmicroprocessorbasedPLCwithSCADA enabledreversible DrumTypemixer/concreteBatchmixplant(Panmixer)etc.complete.Withfine aggregate (Crushed sand VSI Grade)
16Ground Floor
17First Floor
18Second Floor
19Third Floor
20Fourth Floor
21Fifth Floor
22Sixth Floor
23Providing and laying Cast in situ/ReadyMix cement concrete in M-25 of trap/ granite/ quartzite/ gneiss metal for R.C.C. beams and lintelsas per detailed designs and drawingsorasdirectedincludingsteelcentering,formwork,coverblocks, laying/pumping,compactionand roughening the surface if special finish is to be provided andcuringetc.complete.(Excludingreinforcement and structural steel).with fully automaticmicroprocessorbasedPLCwith SCADAenabledreversibleDrumType mixer/ concrete Batch mix plant (Pan mixer) etc.complete.Withfineaggregate (Crushed sand VSI Grade)
24Ground Floor
25First Floor
26Second Floor
27Third Floor
28Fourth Floor
29Fifth Floor
30Sixth Floor
31Providing and laying Cast in situ/Ready Mix cement concrete M-25 of trap/ granite/ quartzite/ gneiss metal for R.C.C.slabs andlandingsasper detaileddesigns anddrawings including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to beprovidedandcuringetc.complete,(Excludingreinforcementandstructural steel).withfully automaticmicroprocessorbasedPLCwithSCADA enabledreversible DrumTypemixer/concreteBatchmixplant(Panmixer)etc.complete.Withfine aggregate (Crushed sand VSI Grade)
32Ground Floor
33First Floor
34Second Floor
35Third Floor
36Fourth Floor
37Fifth Floor
38Sixth Floor
39Providing andlaying Cast insitu/ReadyMix cement concreteinM-20of trap /granite/ gneiss/ quartzite metal for R.C.C. arches with skew backs as per detailed design anddrawingsorasdirectedincludingsteelcentering,plywood/steelformwork,steel props,laying/pumping,compaction,finishingunevenandhoneycombedsurfacewith C.M.1:3ofsufficientminimumthicknesstogiveasmoothandevensurfaceor rougheningthesurfaceifspecialfinishistobeprovidedandcuringetc.complete. (Excluding reinforcement, including cover block). Newly laid concrete shall be covered by gunny bag,plastic,tarpaulinetc.withfully automaticmicroprocessorbasedPLCwith SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade)
40Sixth Floor
41ProvidingandlayingCastinsitu/ReadyMixcementconcreteM-25oftrap/granite/ quartzite/gneissmetal forR.C.C.chajjaasperdetaileddesignanddrawingsincluding steel centering, formwork, cover blocks, laying/pumping, compacting androughening the surface ifspecial finish is to be provided and curing complete. (Excluding reinforcement and structural steel). withfullyautomaticmicroprocessorbasedPLCwithSCADA enabled reversible DrumType mixer/ concrete Batch mix plant (Pan mixer) etc. complete.Withfineaggregate (Crushed sand VSI Grade)
42Ground Floor
43First Floor
44Second Floor
45Third Floor
46Fourth Floor
47Fifth Floor
48Sixth Floor
49Providing and laying Cast in situ/ReadyMix cement concrete in M-25 of trap/ granite/quartzite/ gneiss metal for R.C.C. pardi of required thickness including steel centering,formwork,coverblocks,laying/pumping, compactingandroughening them if special finish istobeprovidedandcuringcomplete.(Excluding reinforcementandstructuralsteel).with fullyautomaticmicroprocessorbasedPLC withSCADAenabledreversibleDrumType mixer/concreteBatchmixplant(Pan mixer)etc.complete.Withfineaggregate(Crushed sand VSI Grade)
50Ground Floor
51First Floor
52Second Floor
53Third Floor
54Fourth Floor
55Fifth Floor
56Sixth Floor
57ProvidingandlayingCastinsitu/ReadyMixcementconcretein M-25oftrap/ quartzite/granite/gneissmetalforR.C.C.Waistslab,andstepsofstaircasesasper detailed design and drawingsorasdirectedincludingsteelcentering,plywood/steel formwork, steel props,laying/pumping, compaction, finishinguneven and honeycombedsurface withC.M.1:3of sufficient minimum thickness to give a smooth and even surface or roughening the surface if special finish is to be provided and curing etc. complete. (Excluding einforcement, including cover block).(Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc.) with fullyautomaticmicroprocessor basedPLCwithSCADAenabledreversibleDrumType mixer/concreteBatchmix plant(Panmixer)etc.complete.Withfineaggregate(Crushed sand VSI Grade)
58Ground Floor
59First Floor
60Second Floor
61Third Floor
62Fourth Floor
63Providing andlaying Castinsitu/ReadyMixcement concrete M-15of trap/granite/quartzite/gneiss metal for copingtoplinth or parapet, moulded or chamferedasper drawingorasdirectedincludingsteelcentering,plywood/steel formworkcompacting, rougheningthemifspecialfinishistobeprovided,finishing uneven and honeycombedsurfaceandcuringetc.complete.TheCementMortar1:3 plasterisconsideredforrenderingunevenandhoneycombedsurfaceonly.Newlylaid concrete shall be covered by gunny bag, plastic, tarpaulin etc. (Wooden centering will not be allowed.) With fine aggregate (Crushed sand VSI Grade)
64Ground Floor
65First Floor
66Second Floor
67Third Floor
68Fourth Floor
69Fifth Floor
70Sixth Floor
71Providingandlayinginsitucementconcrete M-30 withtremix treatmentfor 200mm thicknessforConcreteRoadisincludinglayingplasticsheetfor125micronthickness withgroovecuttingof4mmwideand20mmdeepwithnecessaryrefillingwith polysuphide sealent (Pouring grade) confirming to BS : 5212 - 1989 into sawed groove widened at top for sealent reservoir of specified size and shape as per detailed drawing including fixing Polyethylene foam backer rod of required diameter( excluding reinforcement)withcoarsenandfineaggregateUsingV.S.I.QualityArtifitialSandetc. complete withfullyautomaticmicroprocessorbasedPLCwithSCADAenabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete.
72Providing and fixing in position TMT - FE - 500 bar reinforcement of various diameters forR.C.C.pile caps,footings,foundations,slabs,beams columns,canopies, staircase, newels,chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs,drawingsand schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete.
73Ground Floor
74First Floor
75Second Floor
76Third Floor
77Fourth Floor
78Fifth Floor
79Sixth Floor
80Providing secondclassBurntBrickmasonrywithconventional/I.S.typebricksin cementmortar1:6infoundationsandplinthofinnerwalls/inplinthexternalwalls includingbailingoutwatermanually,strikingjointsonunexposed faces,rakingout joints on exposedfaces and watering etc. Complete.
81Providinguncoursedrubblemasonryoftrap/granite/quartzite/gneissstonesin cement mortar1:6infoundationandplinthofinnerwalls/inplinthofexternal walls includingbailingoutwatermanually,strikingjointsonunexposedfacesand watering etc.complete.
82Providing and constructing masonry in Autoclaved Areaclaved ( Celluar) Concrete Block of aproved manufacturer confirming to IS 2185 Part III 1984 of size ( 625x240x225)mm in extra fine jointing mortar of fixoblock ofin superstucture including,striking joints,racking out joints watering and scaffolding etc.complete
83Ground Floor
84First Floor
85Second Floor
86Third Floor
87Fourth Floor
88Fifth Floor
89Sixth Floor
90Providing and constructing masonry in Autoclaved Areaclaved (Celluar) Concrete Block of aproved manufacturer confirming to IS 2185 Part III 1984 of size (625x 240x100)mm in extra fine jointing mortar of fixoblock of in half brick thick wall including 2 hoopiron strips25mmx1.6mmateverythird course,properly bend and bonded at ends scaffolding racking out joints and watering compete
91Ground Floor
92First Floor
93Second Floor
94Third Floor
95Fourth Floor
96Fifth Floor
97Sixth Floor
98Providing secondclassBurntBrickmasonrywithconventional/I.S.typebricksin cement mortar 1:4 in half brick thick wall including mild steel longitudinal reinforcement of 2 bars of 6 mm diameter / 2 hoop iron strips 25 mm X 1.6 mm placedat every third course, properly bent and bonded at ends scaffolding, racking out joints and watering etc. complete.
99Ground Floor
100First Floor
101Second Floor
102Third Floor
103Fourth Floor
104Fifth Floor
105Sixth Floor
106Providingand applyingplasterwith plasterofparisin6mmthicknesstopreviously plaster surface in all position including preparing the surface scaffolding etc. complete.
107Ground Floor
108First Floor
109Second Floor
110Third Floor
111Fourth Floor
112Fifth Floor
113Sixth Floor
114Providingandapplyinggypsumplaster(withGypsummaterial )withfinishingwith gypsum material in 10 to 13 millimeter thickness to previously plastered surface / or on newly brick surface ( Excluding rough cast plaster ) in all position including preparing and Finishing the surface scaffolding etc.complete.
115Ground Floor
116First Floor
117Second Floor
118Third Floor
119Fourth Floor
120Fifth Floor
121Sixth Floor
122Providinginternalcementplaster6mmthickinasinglecoatincementmortar1:3 without neeru finish to concrete surface in all positions including scaffolding and curing etc. complete.
123Ground Floor
124First Floor
125Second Floor
126Third Floor
127Fourth Floor
128Providinginternalcementplaster12mm thickinsinglecoatincementmortar1:3 without neeru finish to concrete or brick surfaces, in all position including scaffolding and curing etc. complete.
129Ground Floor
130First Floor
131Second Floor
132Third Floor
133Fourth Floor
134Fifth Floor
135Sixth Floor
136Providing patti/ band 75mm wide on plastered surface 12 mm to 15 mm thick in C.M. 1:3 line and level including neat finishing scaffolding curing etc. complete.
137Ground Floor
138First Floor
139Second Floor
140Third Floor
141Fourth Floor
142Fifth Floor
143Providing andapplying Twocoats ofwall care Putty onplastered surface andCeiling and Walls to prepare surface even and smooth of approved make, etc complete.
144Ground Floor
145First Floor
146Second Floor
147Third Floor
148Fourth Floor
149Fifth Floor
150Sixth Floor
151Providing sand faced plaster externally in cement mortar using approved screened sand, in allpositions including base coat of 15 mm thick in cement mortar 1:4 using waterproofing compound at 1Kilogramper cement bag curing the same for not less than 2 daysandkeepingthe surface of the base coat rough to receive the sand faced treatment6to8mm thickin cementmortar1:4finishingthesurfacebytakingout grainsandcuringforfourteendays scaffolding etc.complete.
152Ground Floor
153First Floor
154Second Floor
155Third Floor
156Fourth Floor
157Fifth Floor
158Sixth Floor
159Providing and applying Texture plaster with finishing with texture materialof approved makein 3 to 4 millimeterthickness on previously plastered surface, including PlasterGroove6mm thickness or Tape Grooves 35 to 45 mm thickness or as required,inallposition including preparing the surface, scaffolding etc. complete.
160Ground Floor
161First Floor
162Second Floor
163Third Floor
164Fourth Floor
165Fifth Floor
166Sixth Floor
167Providing and fixing chicken mesh of 22 gauge, with about 30 cm. width at the junction of R.C.C membersandbrickwork,ofapproved qualityincluding fixing mesh in positionby necessary drilling in concrete /B.B.masonry and or tying bybinding wire etc.complete.
168Ground Floor
169First Floor
170Second Floor
171Third Floor
172Fourth Floor
173Fifth Floor
174Sixth Floor
175Providing and laying machine cut machine polished machine cut Kota stone slabs 20 to 25 mm thick for treads and risers of steps and staircases, with rounded nosing for the treads onabedof1:4cementmortarincludingcementfloat,fillingjointswithneatcement slurry, curing, polishing and cleaning etc. complete.
176Providing and laying machine cut machine Polished Kota stone flooring 25mm to 30mm thick andrequiredwidthinplain/diamondpatternonbedof1:6C.M.including cement float, filling joints with neat cement slurry,curing, polishing and cleaning etc.complete.
177Ground Floor
178First Floor
179Second Floor
180Third Floor
181Fourth Floor
182Fifth Floor
183Sixth Floor
184ProvidingsillsofpolishedKotastone25mmto30mmthick,onabedof1:4cement mortarincluding cement float, filling joints with slurry, curing,moulding edges,polishingand cleaning etc. complete.
185Ground Floor
186First Floor
187Second Floor
188Third Floor
189Fourth Floor
190Fifth Floor
191Sixth Floor
192Providingand laying vitrified rustic mattstone finishtiles havingsize 590mm to605 mmx590mmto605mm of8to10mm thicknessandconfirmingtoIS.15622-2006 (Group Bla) of approvedmake,shadeandpatternforflooringinrequiredposition laid onabedof1:4 cement mortar including neat cement float, filling joints, curing and cleaning etc. complete.
193Ground Floor
194First Floor
195Second Floor
196Third Floor
197Fourth Floor
198Fifth Floor
199Sixth Floor
200Providingand laying vitrified rustic mattstone finishtiles havingsize 590mm to605 mmx590mmto605mmto8to10mm thicknessandconfirmingtoIS.15622-2006 (Group Bla) of approvedmake,shadeandpatternfordadoandskirtinginrequired positionfixedin1:4 cement mortar including neat cement float, filling joints, curing and cleaning. etc. complete.
201Ground Floor
202First Floor
203Second Floor
204Third Floor
205Fourth Floor
206Fifth Floor
207Sixth Floor
208ProvidingandlayingVitrifiedMATTfinish havingdecorativetypeofsize1000 millimeter x 1000 millimeter of 8 to 10 millimeter thickness (on a existing flooring) with bonding chemical andconfirmingtoIS15622-2006(GroupBla)ofapprovedmake shade and pattern forflooring in required position laid on a bed of bonding chemicalfillingjointscuringand cleaning etc .complete.
209Ground Floor
210First Floor
211Second Floor
212Third Floor
213Fourth Floor
214Fifth Floor
215Providingandlayingchequeredtilesofapprovedquality ofsize30cmx30cm, confirming tocorrespondingI.S.forflooringinrequiredpositionlaidonabedof 1:4cementmortar including cement float, filling joint with cement slurry cleaning curing etc. complete.
216Providing and laying Antiskid Ceramic tiles of approved qualityof size 30 cm x 30 cm and confirming to IS 15622-2006 (Group-B IIA) for antiskid flooring in required position laid on a bed of 1:4 cement mortar including cement float, filling joint with cement slurry cleaning curing etc. complete.
217Ground Floor
218First Floor
219Second Floor
220Third Floor
221Fourth Floor
222Providing and laying matt finish ceramic tiles of having size 30 cm x 30 cm confirming to I.S.15622/2006 (group D II-A) and 7 to 8 mm thick for flooring in required position laid on a bed of 1:4 cement mortar including cement float, filling joint with white/colour cement slurry cleaning curing etc. complete.
223Ground Floor
224First Floor
225Second Floor
226Third Floor
227Fourth Floor
228Providing and laying ceramic tiles having size 30 cm. x 60 cm. confirming to correspondingI.S. fordadoandskirtinginrequiredpositionwithreadymadeadhesive mortarofapprovedquality onplasterof1:2cementmortarincludingjointfillingwith white/ colour cement slurry cleaning curing etc. complete.
229Ground Floor
230First Floor
231Second Floor
232Third Floor
233Fourth Floor
234Providingandlayinginpositionflooringoftelephoneblack/AmbaWhite/Catbary brown / Rubyred / Ocean Brown granite stone of approved shade and size 18 mm to 20 mm thickon bed 1:6cement mortarincluding cementfloats strikingjoints, pointingin C.M. 1:3 curing and cleaning etc. complete.
235Ground Floor
236First Floor
237Second Floor
238Third Floor
239Fourth Floor
240Fifth Floor
241Providingandfixingmachinecutmachinepolished18mmto20mmthicktelephone black / Amba White / Cat bary brown / RBI red / Ocean Brown granite stone for treads and risers of steps and staircases of approved colour and shade withfullmoulding and three grooved line forthetreadsonbedof1:4Cementmortarincludingfloatfilling jointswithneatcement slurry curing polishing and cleaningetc. complete.
242Ground Floor
243First Floor
244Second Floor
245Third Floor
246Fourth Floor
247Providing sills of required material 20mm to 25mm thick, on a bed of cement mortar 1:4including cement float, filling joints with neat cement slurry, curing, mouldingedges, polishing,cleaning complete.b) Granite
248Ground Floor
249First Floor
250Second Floor
251Third Floor
252Fourth Floor
253Fifth Floor
254Sixth Floor
255Providingandfixingmachinecutmirrorpolished18mm to20mm thicktelephone blackgranite/AmbaWhite/Catbary brown/RBI red/OceanBrowngranitestone partition with full moulding the edges etc.complete . Both side polish
256Ground Floor
257First Floor
258Second Floor
259Third Floor
260Fourth Floor
261Providingandlayingtelephoneblack/AmbaWhite/Cadburybrown/Rubyred/ Ocean Brown granite stone of 18 to 20 mm thick for door frame/ dado/ window boxing etc.OnC.M.1:6includingfillingjointswithpolymerbasefillernosing/mouldingthe sharp edges wherever necessary, curing,etc. complete.
262Ground Floor
263First Floor
264Second Floor
265Third Floor
266Fourth Floor
267Providing andconstructing granite kitchenplatform withfixing of stainlesssteelsink 600 mm x 450mm size as per detaileddrawing including vertical bothside polished kadappah stone 25 to 30 mm thick supports with kadappahtop 35 to 40 mm thick and polishedgranite16to20mm topwithsidestripsofgraniteatfrontandbothsidesof platform raised with two verticalgranitesupports15cmheightandtopgraniteof 75x40cmincludingcutting, opening for sink of required size in kadappah as well as granite etc. complete. (Platform top size 5.00 m x 0.60 m and height is 0.75 m)
268Ground Floor
269First Floor
270Second Floor
271Third Floor
272Fourth Floor
273Providingandfixingheavy duty interlockingconcreteRUBBERMOULD GLOSSYPAVINGBLOCKSof60millimeterthicknessofhavingastrengthof400 Kilogram/sq.mofapprovedqualityandshapeonabedofcrushedsandof25to30 millimeterthickincludingstrikingjointsandcleaning etc.complete.(using100% crushed sand)
274Providingandfabricatingstructuralsteelworkinrolledsectionslikejoists,channels, angles,tees etc. as per detailed design and drawings or as directed including cutting, fabricating,hoisting, erecting, fixing in position making riveted / bolted /welded connections withoutconnectingplates,bracesetc.and includingonecoatof anticorrosive paint andover ittwo coats of oil painting of approved quality and shadeetc. complete.
275Ground Floor
276First Floor
277Second Floor
278Third Floor
279Fourth Floor
280Fifth Floor
281Sixth Floor
282Providing,fabricatinganderecting atsiteofworkthetubularsteelstructure(shed) asper standard design and specifications having various spans in between trusses and in multiples of standard length of bays as specified as per standard specifications, inclusive of cost of steel tubular trusses, tubular columns purlins, tie runners, foundationbolts, base plates,nutsandbolts, welding wherever required etc.as per detailed drawing inclusiveofonecoatof anticorrosive paint and two coats of oil painting of approved quality and shade etc. complete.
283Ground Floor
284First Floor
285Second Floor
286Third Floor
287Fourth Floor
288Fifth Floor
289Sixth Floor
290SupplyandInstallationofDpiFluxtranslucentroofwithstandingseammulticell polycarbonatepanelsystem.ThesystemwithcompleteassemblyofcoextrudedUV protected multicell panels incorporated into a complete system. Co-extruded UV protected polycarbonate panel system of min16 mm thick of1200mm (min.)width withangular daylighting concept. Panels shall have minimum seven layers in a truss bridge design for higher flexibility & strength. Panels with opaque and translucent clear combination as per requiredluxlevelanddesignrequirementswithallfixingaccessoriestoensurebest performanceforwinduplift,vibration,oilcanningandvisualappearance.Panelsshall haveanadditionalIRBlockingfeaturesforenhancethermalcomfort.Panelsshallbe manufactured with vertical standing seam at both sides of the panel. Panels shall be fixed onPurlinwithsnaponconnectorswithdouble toothgrip locklocking mechanismand willbesecuredonMSstructure(willbepaidSeparately)with3OneNumbersself- drilling screws & trapezoid SS fasteners holding the base of the standing seam offering best stability having a pull-out load of min. 7000N (7KN) tested as per ISO 6892:1998 and IS 1608: 2005, as per design requirement. Panels must satisfy Dart drop impact test as per IS 14443-97 shall show no sign of breakage on Polycarbonate sheets which have been exposedtoUVforamin.of500HoursasperASTMG155.Panelsshallnothave Yellowness Index as per ASTM D 1925 of 15 units when tested on a sample exposed to UV for 500 Hours as per ASTM G 155. U value shall not be more than 1.9 W/m2K as per ENISO10077-2:2018.Panel shall bewithadditionalEndcap/AluminiumU/Fprofile/ Glazing Bar for ends as required. Panel shall be fixed over MS structural steel/MS purlin (paidseparately)conformingtothedetailtechnicalspecificationsasperapproved architectural drawings. Trained and factoryauthorized labour with supervision to complete the entire panel installation as per drawing & direction of the engineer in charge. Colour: As per approval The 16mm thick panels shall be used for a roofing height of upto15 mtrs.
291Sixth Floor
292Providing and fixing frame with / without ventilator of size as specified with Country cut teak wood for doors and windows including chamfering, rounding, rebating, iron holdfast of size 300mm x 40mm x 5mm with oil painting, etc. complete
293Ground Floor
294First Floor
295Second Floor
296Third Floor
297Fourth Floor
298Fifth Floor
299Sixth Floor
300ProvidingandfixingM40gradethickvibratedpull castorsimilartypeconcreteframe with chamfer conforming to I.S. 65241983 having 6 mm dia bars 3 Nos. And strips @250 mmc/candfixinginwallwith6Nos.ofholdfastof12mmdiabars500mmlong including primer and oil painting etc, complete) frame size 60 mm x 125 mm
301Ground Floor
302First Floor
303Second Floor
304Third Floor
305Fourth Floor
306Fifth Floor
307Sixth Floor
308ProvidingandfixingCountry cutteak wooddouble orsingle leafpanelled shutters,35 mm thick style top and freze rail 95 x 35 thick with lock and bottam rail 195 x 25 mm thickandpanels without ventilator as per detailed drawing excluding the door frame, stainless steelfixturesandfasteningandfinishingthewoodworkwithoil painting 3 coats complete
309Ground Floor
310First Floor
311Second Floor
312Third Floor
313Fourth Floor
314Providing and fixing solid core flush door shutter in double leaf 32 mm thick decorative type of exterior grade as per detailed drawings approved face veneers 3 mm thick on both faces or as directed, all necessary beads, mouldings and lipping, wrought iron hold fasts, chromium platedfixturesandfastenings,withbrassmortiselock,chromiumplated handlesonboth sides, and finishing with French Polish etc. complete.
315Ground Floor
316First Floor
317Second Floor
318Third Floor
319Fourth Floor
320Providing and fixing solid core flush door shutter in single leaf 32 mm thick decorative type of exterior grade as per detailed drawings approved face veneers 3 mm thick on both faces or as directed, all necessary beads, mouldings and lipping, wrought iron hold fasts, chromium platedfixturesandfastenings,withbrassmortiselock,chromiumplated handlesonboth sides, and finishing with French Polish etc. complete.
321Ground Floor
322First Floor
323Second Floor
324Third Floor
325Fourth Floor
326Fifth Floor
327Sixth Floor
328Providingand fixing fiber glass reinforced polyster door shutter 30 mm thickas perIS 14856 (2000) (Reaffirmed 2006)without ventilatorincludingchromium plated fixtures and fastening with chromium plated handles on both sides, etc complete
329Ground Floor
330First Floor
331Second Floor
332Third Floor
333Fourth Floor
334Providingand fixinginposition (asper1868/1982)Alluminiumslidingwindowof three tracks with rectangular pipe 95 x 38.10 x 0.90 mm at weight 0.637 Kilogram/One Running Metre. with window frame bottom track section 92 x 31.75 x 1.30 mm at weight 1.070 Kilogram/One Running Metre.. Top and side track section 92 x 31.75 x 1.30 mm at weight 0.933 Kilogram/Runningmetre.Theshuttershouldbeof bearingbottom40x18x1.25mmat weight 0.417Kilogram/One Running Metre. Inter locking section 40x 18x 1.10mm atweight 0.469Kilogram/Running metre. andhandleandtopsection40x18x1.25mm atweight 0.417 Kilogram/Running metre. As per detailed drawings and as directed by Engineerincharge with all necessary Aluminium sections fixtures and fastenings such as roller bearing in nylon casting and self locking catch fittedin vertical section of shutter including 5 mmthickplainglassandaluminiummosquitonetshutterwithstainless steeljailwithall required screws and nuts etc, complete. With colour Anodising with box
335Ground Floor
336First Floor
337Second Floor
338Third Floor
339Fourth Floor
340Fifth Floor
341Sixth Floor
342Providing and fixing in position powder coated aluminium louvered windows / ventilator ofvarious sizes with powder coating as per detailed drawing and specifications including aluminiumframes80x38mmx1.22mmboxtype,5mmthicksheet glasslouvers,of approved quality etc. complete.
343Ground Floor
344First Floor
345Second Floor
346Third Floor
347Fourth Floor
348Providing and fixing mild steel grill work for windows, ventilators etc. 20 Kilogram/ One Square Metre asperdrawing including fixtures,necessarywelding andpainting with one coatsof anticorrosive paint and two coats of oil painting complete.
349Ground Floor
350First Floor
351Second Floor
352Third Floor
353Fourth Floor
354Fifth Floor
355Sixth Floor
356Providing and Fixing mat finish stainless steel (of 302 grade ) railing with toppipe of 50 mm dia. and vertical pipe of 38 mm dia at 0.60 m c/c or as required and horizontal pipes of 25 mm dia in three rows, all pipes of 2 mm thick including buffing,fabricating fixtures andfasteningincludingpipebaseofappropriatediameterandballbaseof75mmdia above newel post of 75mmdiameteretc.complete
357Ground Floor
358First Floor
359Second Floor
360Third Floor
361Fourth Floor
362Providing and fixing in position, Double shuttered aluminium extruded powder coatedopenabledoorofspecifiedsizewithaluminiumdoorframeofpowdercoated section 101.60 x 44.75mm ,3.18mm thickandshuttercomprising ofpowder coated section having bottom and lock rail of size 150 mm x 44.5 mm x 3.00 mm thick top rails 47.62 x 44.45 mm x 3.00 mm thick , vertical style 47.62 x 44.45 mm, 3.00 mm thick and forshutterplainglasspanes5mmthickfortoppanelsand12mmthickbothside laminated phenol bonded particle board panels for bottompanels etc. , I.S.I. mark , heavy duty, Hydraulic floorspringof 150Kilogramcapacity , having heavy duty concealedlock, necessarybeading, glazing clips, PVCgaskets,250mmlength aluminium tower bolts, 150mm dia. pad handle, etc. as perdetailed design and drawingorasdirectedbyengineerinchargeincludingallmaterials, labours, and equipment etc.complete
363Ground Floor
364First Floor
365Second Floor
366Third Floor
367Fourth Floor
368Providing and fixing in position, Single shuttered aluminium extruded powder coatedopenabledoorofoverallsize0.90mx2.40mwithaluminiumdoorframeof powdercoatedsection101.60x44.75mm,3.18mmthickandshuttercomprisingof powder coated section having bottom andlock rail of size 150 mm x 44.5mm x 3.00 mm thick top rails 47.62x 44.45 mm x 3.00 mm thick , vertical style 47.62 x 44.45 mm, 3.00mmthickandforshutterplain glass panes 5 mm thick for top panels and 12mmthickbothsidelaminatedphenol bonded particle board panels for bottom panels etc. , I.S.I. mark , heavy duty, Hydraulic floor springof150Kilogramcapacity,having heavy duty concealed lock, necessary beading,glazingclips,PVCgaskets,250mm length tower bolts, 150mm diam. pad handle, etc. as per detaileddesignanddrawingor as directed byengineer in charge including all materials ,labours, andequipment etc.Complete
369Ground Floor
370First Floor
371Second Floor
372Third Floor
373Fourth Floor
374Providng and fixing in position anodised extruded aluminum partitions, partly glazedand partly laminated having frame made out of extruded tubular section of size 40 mm x 60 mm with 12 mm thick three layered flat pressed teak wood particle board bonded withBWPtypeexteriorgradephenolformaldehydesyntheticresinconformingtoIS 128231990,laminatedonbothsides,Novateakorequivalentand5mmthickselected quality plain/ float glass panels fixedwithaluminum glassclips12mm x12mm and rubbercushioningbeadingtoglass partitions as per approved drawing etc. compete
375Ground Floor
376First Floor
377Second Floor
378Third Floor
379Fourth Floor
380Fifth Floor
381Providing & fixing factory-made Single leaf 2 hour fire rated dooras per IS 3614 Part 2 & BS 476 Part 20 & 22, tested to UL 10 C and conforming to NFPA 80 , tested at NTL /CBRI/ARAI of Plain Steel finish type with a.) Frame of size 143x58 mm and thickness of 1.6 mm thick skin pass galvanized iron sheet (Conform to IS 277 ) formed to single or double rebate profile b.) Shutter of 46 mm thickness and constructed from 1.2 mm thick skinpasgalvanizedironsheet(ConformtoIS277)infillRockwool/Mineralwool/ Honeycombcraftpaperc.)Visionglassof5mmthickclear/wiredglassCircularor Rectangulard.)Finish:Primedwithzincphosphatestovingprimerandfinishedwith Polyurethanealiphaticgradeorepoxypaintasrequiredofthickness60microne.) Accessories : Min 8 Anchor fastener of HILTI make, min 3 SS Ball Bearing Butt Hinges, Mortise sash lock with lever handle, Mortise dead bolt , Mortise latch , Door closer , Panic bar and external trim lock and Flush bolts complete.
382Ground Floor
383First Floor
384Second Floor
385Third Floor
386Fourth Floor
387Fifth Floor
388Sixth Floor
389Providing and applying two coats Apex Ultima Puranature Anti-Pollution Or equivalent approved brand, paint should decomposes organic substancesand inorganic gases(NOx, VOC’s, CO, SOx, formaldehydes, etc.) in presence of natural or artificial light. It contains Grapheneandnanoparticlesoftitaniumoxide.andAbsorbsCO2(4.8Kilogram/15l). plaster crack should be filled by Acrylic base Crack seal/Textured Crack filler, Paint has to applied on one coat of Apex Ultima Puranature Anti-PollutionPrimer orEquivalent. WarrantyShouldbegivenbytheManufaturerTheworkshouldbedonebythe Manufacturer Recommended applicator and he should be able to furnish stage wise onsite technical reports from the concerned company technologist.
390Ground Floor
391First Floor
392Second Floor
393Third Floor
394Fourth Floor
395Fifth Floor
396Sixth Floor
397Providing and applying priming coat on concrete/ masonary/ Asbestos Cement plastered surfaces including scaffolding if necessary, preparing the surface by thoroughly cleaningoil,grease,dirtandotherforeignmatterandsandpaperingasrequiredetc. complete.
398Ground Floor
399First Floor
400Second Floor
401Third Floor
402Fourth Floor
403Fifth Floor
404Sixth Floor
405Providingandapplyinginteriorwallfinishlusterofapprovedmakeoninternalwall surfaceasdetailedbelow Scrappingthe surfacewith emery paper and wipe cleanwall primer with brush withmineralturpentinewithbrush8to10%andoil15to20% with roller andallowing to dry for a period 6 to 8 hours. wall putty with appropriate proportion ofwater allowing to dry forperiod 4to 6hours. Scrapping withEmerypaper180andwipe clean. Applyingwall primer withbrushwithmineral turpentine 8 to 10% andoil 15 to 20% with rollerScrappingEmerypaper320and wipeclean,interiorwallfinishluster1stcoatwith brush/rubber/spraywithmineral turpentine 7to 9%andOilwithroller19 to 21% After8 hours of activity Applying 2nd coat or wall finish Lustre with mineral turpentine 7 to 9% withbrushandOil with roller 19 to 21% after allowing dry for theperiod of6 to8 hoursactivity. (Withprior approval of S.E.)
406Ground Floor
407First Floor
408Second Floor
409Third Floor
410Fourth Floor
411Fifth Floor
412Sixth Floor
413Providing and applying plastic emulsion paint of approved quality, colour and shade to new surface in three coats including scaffolding, preparing the surface. (excluding primer coat) etc. complete.
414Ground Floor
415First Floor
416Second Floor
417Third Floor
418Fourth Floor
419Fifth Floor
420Sixth Floor
421Providingandapplyingtwocoatsofsyntheticenamel paintofapprovedcolourtonew /old structural steel work and wood work in buildings, including scaffolding if necessary, cleaning and preparing the surface (excluding primer coat) etc. complete.
422Ground Floor
423First Floor
424Second Floor
425Third Floor
426Fourth Floor
427Fifth Floor
428Sixth Floor
429Providing and applying priming coat over new wood and wood based surfaces, including preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter, sand papering and knotting, scaffolding etc. complete.
430Ground Floor
431First Floor
432Second Floor
433Third Floor
434Fourth Floor
435Fifth Floor
436Sixth Floor
437Providing and fixing in position structural glazing faces of building made out of colour anodized aluminium frame curtain wall of 63 mm x 57 mm x 2.20 mm thick including toughened reflective glass 5 mm thick of 900x1200 mm size. The item shall include toughened coloured reflective glass 5 mm thick water proofing silicon sealant, G.E. winsil 10/20, G.E.ultra glaze including alumnium fixtures.S3 screws and nut bolts, scaffolding , m.s.angle cleats and frame work of 65 mm x 65 mm x 6 mm and scaffolding etc. complete. Minimum 20% area of structural glazing shall be openable for openable panels. aluminum hinges, wind stays and locking arrangements and aluminum angle or tee section of required size as directed byEngineer in Charge
438Ground Floor
439First Floor
440Second Floor
441Third Floor
442Fourth Floor
443Fifth Floor
444Sixth Floor
445Supplyingandfixingof6mmthickExteriorCompactLaminateorHighPressure Laminate of approved colour by approving authority with UV resistant Decorative colour paperonbothsidetypicallymadeoutofmultiplelayersofcraftpapersandthen impregnatedwiththermosettingphenolicresins,ontopofitmelaminetreatedbarrier paperanddecorativepaperandwearlayeronboththesidessaturatedwithmelamine resinsandthencoveredwithUVresistantacrylicresinlayer whichmakes itextremely durableandweatherresistantcompressedtogetheron extremelyhighpressureand hardened with electron beam curing to get the total desired thicknessof 6mm matching EuropeanstandardspecificationasperEN438-part6,protectedwith60Micron protective peel-off film on both side which in no case leave any adhesive mark over the panel surface after it is peeled off. Fixing of the same to be done on a supporting frame of 50 mm X 5 mm X 3 mm powder coated aluminium box section to be spaced horizontally andverticallyin600mmX600mmgridandfixedtobuildingstructureasperdesign through50mmX50mmXmm5mmMSanglebracketprefixedtomasonryslabor columns with Hilti make anchor fastener along with all related hardware and fixtures. The panelshouldthenbefixedontheAluminiumsectionwiththehelpofpurepolyester exteriorgradecolourcoatingrivetsasperarchitecturaldrawingsorasdirectedby Engineer-in-charge.Eachpanelshouldberivetedonsubstructuremaintainingagapof 6mmonallthesidesbetweeneachPanelforAircirculationandexpansionand contraction as per installation specifications provided by the manufacturer. The cost shall include all expenses related to storage, material handling, lifting, freight, labour, scaffolding etc as directed by Engineer-in-charge. (Prior permission of S.E. is necessary before inclusion of this item in estimate)
446Ground Floor
447First Floor
448Second Floor
449Third Floor
450Fourth Floor
451Fifth Floor
452Sixth Floor
453Providing and Fixing Sun Louvre panels roll formed, 0.6mm thick, pre-painted stove enameledaluminiumstripofacorrosionresistantalloy,includingnecessaryfittingetc. complete, as directed by Engineer in Charge.
454Ground Floor
455First Floor
456Second Floor
457Third Floor
458Fourth Floor
459Fifth Floor
460Sixth Floor
461Bamboowood14mmthickTileFlooringincludingquarterround&doorreducer- Providing &fixinginpositionPhenolbondedEpitomeBamboowoodflooringwith planksofsizes 14mm thick, 1800mm length (minimum) and 130mm wide (minimum), inapprovedcolour,texture and finish, having Performance Appraisal Certificate (PAC) issued byBuildingmaterials & TechnologyPromotion Council (BMTPC). Theflooring shallbe fixed withtongue andgroove interlocakingsystem, with2mm underlayassoundabrobingandmoisturebarrierandunderlaymentof4mmthick expandedpolyethylenefoamsheetshavingdensity40Kilogram/cum,overprepared surface with necessary quarter round planks of size 1900mm x18mmanddorrreducer of size 1900mm x 44mm, wherever required. The EpitomeBamboowood planks shall have minimum density of 1000 Kilogram/cum & minimumHardness 1000 Kilogramf.withEcofriendlyUVcoating,allcompleteasperdirectionof Engineer in-charge
462Ground Floor
463First Floor
464Second Floor
465Bamboowood14mmthickwallSkirting-Providing&fixinginpositionPhenol bonded EpitomeBamboowoodinwallskirtingwith planksofsizes14mmthick, 1900mmlength (minimum)and85mmwide(minimum),inapprovedcolour,texture and finish, havingPerformance Appraisal Certificate (PAC) issued by Building materials&Technology PromotionCouncil(BMTPC).Theskirtingshallbefixed SS screws & rawl plugs, overunderlaymentof4mmthickexpandedpoly ethylene foam sheets having density 40Kilogram/cum,overpreparedsurface.The EpitomeBamboowoodplanks shallhave minimumdensity1000Kilogram/cum& minimumHardness1000Kilogramf.withEco friendly UV coating, all complete as per direction of Engineer in-charge
466Ground Floor
467First Floor
468Second Floor
469Providing and fixing board displaying information, such as \"Name of work, Tender cost, Name of Contractor, Work completion and liability period etc\", having rectangular shape of 1.20m x 0.90m size made out 18 gauge (1.25mm) thick mild steel sheet painted with one coat of Zinc chromate stoving primer and two coats of enamel paint on front side and grey stove enamel on back side and border / messages / symbols etc. with approved colour shadepaintcomplete, onM.S.angle ofsize 35x 35x 3mm framewith properly cross braced M.S. angles of size35mmx35mmx3mm duly painted includingTwo M.S.angle iron posts of size 65 mm x 65 mm x 6 mm, 3.65 m long painted with alternate black and whitebandsof25cmwidthincludingallfixturesetc.andfixingtheboardsin1:4:8 concreteblockofsize60cmx60cmx75cmincluding,excavation,refilling, transportation, and labour etc complete.
470Providingcementbasedwaterproofingtreatmenttoterraces(Indianwaterproofingor alike) with brick bats laid in required slope to drain the water for any span after cleaning the base surface. Applying a coat of cement slurry admixed with approved water proofing compound and laying the brick bats on bottom layer in C.M.1:5 admixed with approved waterproofingcompoundfillinguptohalfdepthofbrickbats,curingthislayerfor3 days,applyingcementslurry overthislayerjointsofbrickbatswithC.M.1:3admixed with approved water proofing compound and finally top finishing with average 20 mm. thick layers of same mortar added with jute fiber at 1Kilogramper bag including finishing thesurfacesmoothwith cementslurryadmixed withapproved waterproofing compound.Markingfinishedsurfacewithfalse squares of 300mm x 300 mm. making thejunctionsattheparapetroundedandtaperedtopforrequired height, with drip mould at the junction of plaster and parapet and curing andcovering 10 years Guaranteeagainst leakproofness onCourt feestamp paperof Rs. 500/- including ponding test etc. complete.
471Ground Floor
472Third Floor
473Fourth Floor
474Fifth Floor
475Providing and laying Hyperplas Aluminium or equivalent polymeric multiple monolithic fivelayerwaterproofing flexible, pliableandhightensilestrengthmembrane(3 Kilogram/OneSquareMetre)whichiscompriseoftopwith\"V\"shapeembossed40 micron Aluminium foil to bear thermal expansion and avoiding delamination & consist of centre core of 90 micron thick High Molecular High density Polyethylene film (HMHDPE)whichisprotectedonboththesidewithpolymericmix.Applyingthe membranebythermofusingtoroof¶petafterapplyingthinfilmofhotblown bitumen85/25or90/[email protected]/OneSquareMetremaximumasper surface condition or Hyperplas primer @ 250 gms/ One Square Metre as per site condition on the surface to be treated with 10 cm overlapping including finishing etc. complete and covering guarantee of 7 years on stamp paper of Rs. 100/- and as directed by Engineer-in- charge.
476Third Floor
477Fourth Floor
478Fifth Floor
479Providing waterproof plaster in W.C. and bath20 mm thick for dado in cement mortar 1:3 with neat finishing, floating using waterproofing compound at the rate of 1 Kilogram. per bag of cement of approved make and manufacturer and curing(and filling joints of Nahani trap andany outlet by properly) etc. complete.
480Ground Floor
481First Floor
482Second Floor
483Third Floor
484Fourth Floor
485Providing and fixing Modular false ceiling of 600 x 600 mm center to center and 13 mm thicksquaremineral fiberboardtobefixedonframeworkofalluminium sectionsfor suspended falseceiling consisting ofalluminiumT 2”x1½”(50mmx40mm) weighing0.39 Kilogram/m at 60 cms center center and fixed with ½” x ½” (15 x 15 mm) flanges weighing 0.19 Kilogram/m suspended on 6 mm dia mild steel rod weighing 0.22 Kilogram/m, fixed on wall and beams including rounding of the edges with alluinium T of 2” x 1 ½” (50 mm x 40 mm) weighing 0.39 Kilogram/m etc. (all alluminium sections shall be anodized) including all labour, material, lifts etc. complete.
486Ground Floor
487First Floor
488Second Floor
489Third Floor
490Fourth Floor
491Fifth Floor
492Sixth Floor
493Providing andfixinginpositionGypsum boardfalseceilingwith 12.5mm thick Gypsumboards,screwed/fixed to the under structure of suspended G.I. Grid constructedand suspended from the main ceiling consisting of ceiling sections of size 25 x 50 mm maximum centertocenterdistanceof600milimetreperimeterchanneland intermediate channels atmaximum center to center distance 1200 milimetre galvanizedgridshouldbefixedto reinforced cement concrete slab. The gypsum board shouldbefixedtogalvanizedirongridwithnecessaryscrews. Theboardsshouldbetaped and filled from underside to give smooth, seamless ceiling.The rateshould include necessary additional ceiling sections and intermediate channels.Additional intermediate channels should be fixed to strap hangers for additional support to prevent strapping at every 1200 milimetre item to be completed inall respect including necessary sleeves for ducts finishing of joints cut outs, painting including labour, material, lifts etc. all complete.
494Ground Floor
495First Floor
496Second Floor
497Third Floor
498Fourth Floor
499Fifth Floor
500Sixth Floor
501ProvidingandFixing SoftFibreAcousticalSuspendedCeilingSystemwithOptra (BevelledTegular)EdgeTilesofsize15mmExposedGrid.Thetilesshouldhave HumidityResistance(RH)of95%,NRC0.9-1.0,LightReflectance?85%,Colour White, Fire Performance UK Class 0 / Class 1 (BS 476 pt - 6 &7) in module size of 600 x 600 x 15mm , suitable for Green Building application, with Recycled content of 66% GW and 74% RW. The tile shall be laid on precoated G.I channel 32 with 15 mm wide T- section flanges colour white having rotary stitching on all T sections i.e. the Main Runner, 1200mmand600mmCrossTeeswithawebheightof32mmandaloadcarrying capacity of 7 Kilograms/M2 with a minimum pull out strength of 100 Kilograms. The T Sections have a Galvanizing of 90 grams per M2 and need to be installed with Suspension system The Tile and Grid system used together should carry a 10 year warranty.products approved as per GRIHA and BS 476 etc. complete.
502Second Floor
503Fourth Floor
504Providing&Fixinginposition,AcousticalPanellingmadefrom Fabricwrapped Compressed polyester fibre nonwoven 9 mmpanels on, 50 x 50 mm sal-wood frame of 600 x 600 c to c having wooden supports from wall of required length, in front of 1000 gsmsyntheticwool50mmthickwithchickenmeshonwallside,includingcostof requiredCut-Outs,decorativemouldings/finishing-items/paint & Scaffolding, asper Architectural & Acoustical Design & Instructions & Complete in all aspects.including all materials labour,finishing etc complete
505Second Floor
506Fourth Floor
507Providing ofAccoustic Door to effectively control noise inconference rooms, broadcasting studios, theatres and music practice rooms. with prior approval of concerned Superitending Engineer. a)Door Frame: Providing Frames for Accoustic door shutters with double rabbit of 68mm 1stclassMalaysianHardwoodFramedensifiedandpressuretreatedwithchemicalsin vacuumimpregnationvessel under160PSI pressureasperIS:401andkilnseasonedto moisture below 15% as per IS:1141 of section 120 X 70 mm spray quoted with 2 coats of Intumescentpaintofminimum200micron,with1rowofHafeleAccousticseals concealed in the groove of the Frame for noise control, etc. complete as per direction ofEngineer in Charge
508Second Floor
509Fourth Floor
510Providing ofAccoustic Door to effectively control noise inconference rooms, broadcasting studios, theatres and music practice rooms. with prior approval of concerned Superitending Engineer. b)Shutter:Providingof65mmthickAccousticDoorShutterswithwoodenstructure comprisingofChemicaltreatedinternaltimberwithantitermitechemicalsinpressure impregnation vessels under 160 PSI pressure as per IS:401and kiln seasoned to moisture below 15% as per IS:1141 frame work of 100x 48 mm with 48 mm thick infill of ceramic vermiculite mix of density 54Kilograms/CMT, 3mm sheet rubber interlayer sheet on one side for acoustic property, faced with 6mm High Density Waterproof Ply confirming to IS Code 2201, internally lipped with hardwood beading, and pasted in Hydraulic Press under 50tonnespressure,spray quotedwith2coatsofPUpaintofminimum200micronof color of engineer choice (any Veneer or Lamination will cost extra), without any external lipping along with double rebatting in shutters & accoustic seal
511Second Floor
512Fourth Floor
513Acrylic tactile audio map Design, supply, fabrication and fixing of acrylic, non glare, tactile audio pictorialbuilding layoutas per the approved size, design and make, having6mm thickacrylic nonglare base plate of the approved colour and non glare acrylic cut out symbols and upper case SansSeriflettersof12mm height,raised3mm abovebaseplateandGrade2/ Grade1 Braille to be integral with the sign face and be raised 0.5mm above base plate. The map to be installed at the specified location as per accessibility standards,shall be oriented to the position of the viewer and to be installed at a height of 800 mm from the finished ground/ floorlevelandusingthenecessaryhardwarespecifiedbythemanufacturerandtobe installed up to the satisfaction of the engineer in charge
514Ground Floor
515First Floor
516Second Floor
517Third Floor
518Fourth Floor
519Fifth Floor
520Sixth Floor
521Directional signage Design, supply, fabrication and fixing acrylic multilingual Braille (raised dots) directional signboards of size 6\" x 9\"designed as per accessibility standards and having 4mm thick acrylic base plate with Upper Case San Serif words made of white acrylic non glare cut out letters of height 15mm raised not less than 0.8mm above base plate and the equivalent word written in Hindi with Devnagri non glare acrylic letters of height 15mm raised not less than 0.8mm above base plate and having a non glare acrylic cut arrow pointing in the required direction. Each signboard to be fixed as per manufacturers specifications on the wallattheapprovedlocationandataheightof1200mmfromFFLandasperthe directions by the engineer in charge.
522Ground Floor
523First Floor
524Second Floor
525Third Floor
526Fourth Floor
527Fifth Floor
528Sixth Floor
529Paintinglettersupto20cmheightcompletebrushes,coirbrushers,dusting,cleaning, including cost of paint etc. complete.
530Ground Floor
531First Floor
532Second Floor
533Third Floor
534Fourth Floor
535Fifth Floor
536Sixth Floor
537Providing and fixing European type white glazed earthenware coupled closet symphonic trapwith symphonic low levelwhite glazed 10 litres cistern with black backlite seatwithall necessary pipe connection etc. complete.
538Ground Floor
539First Floor
540Second Floor
541Third Floor
542Fourth Floor
543Providing and fixing 1st class white glazed earthenware Orissa Type W.C. Pan 580 mm diaincludingPorStrapcastironsoil andventpipeuptotheoutsidefaceofthewall (1:5:1 0) cement concrete bedding 15 mm thick, 10 liter P.V.C. flushing cistern with all necessary pipe connection etc. complete.
544Ground Floor
545First Floor
546Second Floor
547Third Floor
548Fourth Floor
549Providing and fixingwall hung white wash basin of size550 x 400 x 195 mm withpillar cock havingflowrateupto6.0Litr/Minute,C.P.Angularstopcocklongthread of Jaquar/Cera/Hindware/Perrywareorequivalent make,includingSSbottaltrapof approved make etc complete as directed by Engineer in charge.( Make shall conform to manufacturer\"s Green product and shall got approved from the Engineer In Charge.)
550Ground Floor
551First Floor
552Second Floor
553Third Floor
554Fourth Floor
555Providingand fixingWhiteGlazed EarthenwarefullstalltypeUrinalwith P.V.C. flushing cistern of 5 liters capacity with fitting, inlet pipes and stop tap, brackets for fixing the cistern, 32 mm dia. P.V.C flush pipe with fittings and flushing arrangement including lead soil pipe, lead trap, soil pipe connectionup to the outside face of the wall
556Ground Floor
557First Floor
558Second Floor
559Third Floor
560Fourth Floor
561Providingandfixingstainlesssteelsinkofsize600x510x200mm incluidng coupling, outlet pipe, elbow and other necessary fitting, finishing etc. complete.
562Ground Floor
563First Floor
564Second Floor
565Third Floor
566Fourth Floor
567Providing and fixing C.P. hard shower (health faucet) 1 m. PVC tube with wall hook Jaquar make (CAT NO. ALD 563) with approved make including necessary sockets/ unions, nuts etc. complete
568Ground Floor
569First Floor
570Second Floor
571Third Floor
572Fourth Floor
573ProvidingandfixingC.P.sinkcockwithraisedJ\"shapedswingingcastedspout ofapproved make including necessary sockets/ union nut etc. complete.\"
574Ground Floor
575First Floor
576Second Floor
577Third Floor
578Fourth Floor
579Providing and fixing C.P.Two way BIB cock of approved make continental including necessary sockets/union nut etc. complete.
580Ground Floor
581First Floor
582Second Floor
583Third Floor
584Fourth Floor
585ProvidingandfixingC.P.BIBcockwithwallflangeofapprovedmakeincluding necessary sockets/ union nut etc. complete.
586Ground Floor
587First Floor
588Second Floor
589Third Floor
590Fourth Floor
591Providing and fixing C.P. pillar cock long neck with aerator of approed make including necessary sockets/union nut etc. complete.
592Ground Floor
593First Floor
594Second Floor
595Third Floor
596Fourth Floor
597ProvidingandfixingC.P.Angularstopclockwithwallflangeofapprovedmake continental including necessary sockets/union nut etc. complete.
598Ground Floor
599First Floor
600Second Floor
601Third Floor
602Fourth Floor
603Fifth Floor
604ProvidingandFixinghalfturn25mmdiagunmetalflushingcockincludingall accessories etc. complete.
605Ground Floor
606First Floor
607Second Floor
608Third Floor
609Fourth Floor
610Fifth Floor
611Providingandfixingchromiumplatedtowelrod16mmdiaand75cm.inlength including all accessories complete.
612Ground Floor
613First Floor
614Second Floor
615Third Floor
616Fourth Floor
617Fifth Floor
618Providing andfixing 450mm x550mm size superiortype Belgium mirrorwith16mm dia. nickel plated towel rod etc. complete.
619Ground Floor
620First Floor
621Second Floor
622Third Floor
623Fourth Floor
624Providing and fixing 15 cm rigid PVC Nahani trap including PVC grating ,bend,connectingpieceofUPVCpipeuptotheoutsidefaceofwall,making thegood damaged surface and testing etc. complete
625Ground Floor
626First Floor
627Second Floor
628Third Floor
629Fourth Floor
630Providingandfixing75mmdiastabiliserpipe/P.V.C.soilvent/wastepipeand withnecessaryfixturesand fittingsuchasbends,tees,singlejunctions,slottedvent, clamps etc. complete
631Ground Floor
632First Floor
633Second Floor
634Third Floor
635Fourth Floor
636Fifth Floor
637Sixth Floor
638Providing , laying and fixing ,jointingEco- drain 110 mm SN 8 Nu- Drain Upvc pipes or ofequivalentmake,manufactureasperEN13476orequivalentasperI.S.15328with fittings such a bends, tees, coupler, etc, jointing with rubber lubricant including necessary excavation, trench refilling with selective excavated material etc. complete.
639Ground Floor
640First Floor
641Second Floor
642Third Floor
643Fourth Floor
644Fifth Floor
645Sixth Floor
646Providing , laying and fixing ,jointingEco- drain 160 mm SN 4 Nu- Drain Upvc pipes or ofequivalentmake,manufactureasperEN13476orequivalentasperI.S.15328with fittings such abends,tees,coupler,etc,jointingwith rubberlubricantincluding necessary excavation, trench refilling with selective excavated materialetc. complete.
647Ground Floor
648First Floor
649Second Floor
650Third Floor
651Fourth Floor
652Fifth Floor
653Sixth Floor
654Providingand fixing15cm x10cm saltglazed stonewaregully trapin cementconcrete 1:4:8outsidethebuildingincludingcastirongratinginthesink,connectingglazed stonewarepipe,brickmasonry chamberwithcastironlidandcastirongratingforthe gully trap.
655Providingand laying concrete pipes of I.S.NP. class of 300mm diameter in proper line, levelandslopeincludingnecessarycollars,excavation,laying,fixingwithcollarsincement mortar 1:1 and refilling the trench complete.
656Providing and constructing Brick MasonryInspection Chamber 60cm x 45cm x 90cmincluding 1:4:8 cement concrete foundation 1:2:4 cement concrete channels halfround G.S.W. pipes, Brick Masonry, plastering from inside and with frame fixed in cement concrete with R.C.C. Cover medium duty 140Kilogramwith frame etc complete.
657Providingsoakpitofsize 120cm x120cm x120cmincluding excavatingandfilling with brick-bats.
658Providingand fixing40mm.diaBallcockmediumtypewithPVCfloatincluding sockets and necessary fittings and tested as per municipal requirements etc. complete.
659Ground Floor
660First Floor
661Second Floor
662Third Floor
663Fourth Floor
664Fifth Floor
665Sixth Floor
666Providingand fixing15mm.diaBallcockmediumtypewithPVCfloatincluding sockets and necessary fittings and tested as per municipal requirement etc. complete.
667Ground Floor
668First Floor
669Second Floor
670Third Floor
671Fourth Floor
672Fifth Floor
673Sixth Floor
674Providing and fixing P.V.C. Rain water pipes of 160mm outer diameter and havingwall thicknessof2.2to2.7mmconfirmingtoI.S.13592-1992including proper rainwaterreceivingrecesswithP.V.C.plug,bend,necessaryfittings,suchas, offsets, shoes, inluding fixing the pipe on wall using approved wooden cleats projecting 25mm to 40mm from face of wall a fixing with clips of approved quality and One Number ,filing the joint using rubber gasket withsolventcementandproperlyrestingtheshoe ofpipesonC.C.ormasonryblocks, including necessary scaffolding and maintenance for 3 yrs for any leakages or dislocations of pipes. All the P.V.C. fittings and additional 2 piece socket clips shall be got approved from engineer in charge etc. complete.
675Ground Floor
676First Floor
677Second Floor
678Third Floor
679Fourth Floor
680Fifth Floor
681Sixth Floor
682Providingandfixing in position UPVC ultra violetstabilized 110mm outerdiameter cowldomeconfirmingtoI.S.-4985includingmakingjointswithsolventcementetc. complete
683ProvidingandfixingH.D.Pcontaineronepiecemouldedwatertankmadeout of low density polythyler and built corrugation including of delivery up to destination hoistingand fixingofaccessoriessuchasinlet,outletoverflowofall tankscapacity above 1000 to 20,000 litres
684Providingandfixingonwalls/ceiling/floor15mmdia.CPVCpipewithnecessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete.
685Ground Floor
686First Floor
687Second Floor
688Third Floor
689Fourth Floor
690Fifth Floor
691Sixth Floor
692Providingand fixingon walls/ceiling/floor20 mmdia. CPVCpipewith necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete.
693Ground Floor
694First Floor
695Second Floor
696Third Floor
697Fourth Floor
698Fifth Floor
699Sixth Floor
700Providingandfixingonwalls/ceiling/floor25mmdia.CPVCpipewithnecessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete.
701Ground Floor
702First Floor
703Second Floor
704Third Floor
705Fourth Floor
706Fifth Floor
707Sixth Floor
708Providingandfixingonwalls/ceiling/floor32mmdia.CPVCpipewithnecessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete.
709Ground Floor
710First Floor
711Second Floor
712Third Floor
713Fourth Floor
714Fifth Floor
715Sixth Floor
716Providingandfixingonwalls/ceiling/floor40mmdia.CPVCpipewithnecessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete.
717Ground Floor
718First Floor
719Second Floor
720Third Floor
721Fourth Floor
722Fifth Floor
723Sixth Floor
724Providingandfixingonwalls/ceiling/floor50mmdia.CPVCpipewithnecessary fittings, remaking good the demolished portion etc. complete.
725Ground Floor
726First Floor
727Second Floor
728Third Floor
729Fourth Floor
730Fifth Floor
731Sixth Floor
732Providing andlaying intrenches50mm dia.medium gradehaving embossedasISI Mark galvanised iron pipes ?of 5.17 Kilogram/meter necessary fitting remaking good the demolished portion with filling trenches and with primer of anti-corrosive oil paint,2coatsIncludingremovingexistingpipelineifnecessary and conveyingand stacking the same in PWD chowky or as directed etc. complete.
733Ground Floor
734First Floor
735Second Floor
736Third Floor
737Fourth Floor
738Fifth Floor
739Sixth Floor
740Providing and fixing rolling shutter fabricated from steel laths of minimum thickness 0.9 mm with lock plate of 3.15 mm thickness reinforced with 35 x 35 x 5 mm angle section fittedwith sliding bolts and handles for both sides, deep M.S. channel section of depth and thickness not less than 65 mm and 3.15 mm respectively with hold fast arrangements, M.S.Bracketplate300x300x3.15mmminimumsizeandshapewithsquarebar, suspension shaft of minimum 32 mm diameter, hood cover of M.S. sheet not less than 0.9 mmthicknessandofanysizeattopandsafetydevicesincludingmechanicalgear operation arrangement consisting of worm gear wheels and worms of high grade cast iron ormildsteelandonecoatofredleadprimeretc.complete.(I.S.62481979)(With mechanical gear)
741Providingand applyingtwocoatsof exterioracraylicemulsion paintconfirming tocorrespondingI.S.ofapprovedmanufactureandofapprovedcolourtotheplastered surfacesincluding cleaning ,preparing the plaster surface, applying primer coat ,scaffoldingif necessary , and watering the surface for two days etc complete.
742Providing and erecting chain link fencing 1.6 M. height with G.I. chain link of size 50x 50 mm, 8 gauge thick and fixed 75 mm above ground level on vertical M.S. Angles of 40 x 40 x 6 mm size, includind excavating pits for foundation and embedded in C.C. block of 1:4:8 mix of size 450 x 450 x 670 mm. at 1.75 M. c/c with iron bar 16mm dia as hold fast including welding link with angle frame at 30 cm c/c with nuts and bolts and horizontal M.S. Angles at top andbottom of 25 x 25 x 5 mm size andvertical M.S. flat 35 x 5 mm and25 x 5mm horizontal including cross support of 40 x 40 x 6 mm angles both side at every corner or bend embedded in concrete blocks of 1:4:8of size 450 x 450 x 670 mm including 3 coats of oil painting etc. complete.
743Providing and fixing 20 to 25 mm thick rough shahabad box type waterproofing treatment to vertical outside faces of Reinforced Cement concrete walls of basement or underground floor including filling the gapof 25 mm betweenrough shahabadand R.C.C. walls with cement grout mixed with water proofing liquid Algae proof or other alike with one tile lift method,brushing the joints horizontally with cement slurry mixed with water proofingliquidfor width 30 to 35 mm and sloping coping over topmost tile with cement mortar1:3,buttingthebottom most with Cement concrete1:2:4 mixed with water proofing liquid,curing,with7 yearsguaranteeoncourtfeestampofRs.100/-with ponding testetccomplete.(excluding Cement concrete 1:3:6 base concrete)
744Providingflushgroovedpointingwithcementmortar1:3forstonemasonrywork including scaffolding and curing etc. complete.
745Providing and laying cement concrete pipe of IS 458:2003 NP-3 class of 900mm diameter in proper line, level and slope etc. complete.
746Providingfinecement finish 1.5mmthickover greenplaster surfaceincluding scaffolding curing etc. complete.
747Providing , laying and fixing ,jointingEco- drain 200 mm SN 4 Nu- Drain Upvc pipes or ofequivalentmake,manufactureasperEN13476orequivalentasperI.S.15328with fittings suchabends,teestees,coupleretc,jointingwithrubberlubricantincluding necessary excavation, trench refilling with selective excavated materialetc. complete.
748Providing , Laying and fixing, jointing Eco Drain 250 mm SN-04 Nu-Drain Upvc pipe or ofequivalentmake,manufactureasperEN13476orequivalentasperI.S.15328 & 16098withfittingssuchabends,tees,coupler,etc.jointingwithrubberlubricant, includingnecessaryexcavation,trenchrefillingwithselectiveexcavatedmaterialetc. complete.
749Providing , Laying and fixing, jointing Eco Drain 315 mm SN-04 Nu-Drain Upvc pipe or ofequivalentmake,manufactureasperEN13476orequivalentasperI.S.15328 & 16098withfittingssuchabends,tees,coupler,etc.jointingwithrubberlubricant, includingnecessaryexcavation,trenchrefillingwithselectiveexcavatedmaterialetc. complete.
750Providing and constructing Brick MasonryInspection Chamber 90cm x 45cm x 90cmincluding 1:4:8 cement concrete foundation 1:2:4 cement concrete channels halfround G.S.W.pipes, Brick Masonry, plastering from inside and with frame fixed in cement concrete with R.C.C. Cover medium duty 140Kilogramwith frame etc complete.
751ProvidingandconstructingDuctileIroncircularmanhole45cmdia.Attop90cmat bottom up to 1.80 meter to 2.70 meter depthincluding excavation,laying 1:4:8cement concrete bedding 15 cm thick burnt brick mansonry with 1:1 cement mortar plaster 25 mm thick inside and outside 20 mm (1:3) ductile iron heavy type cover with ring 125Kilograminweight.Highstrength.MorelifeandDurability,GoodAntiskidGrip, Suitable to heavy theatric loading, Light weight casting after cost benefits for TransportationRefillingetc.asperrequirement.
752ProvidingandinstallingbiodigesterunitbasedonDRDOtechnologymadeoffibre reinforcedplastic(FRP)havingcompositionandfollowingtechnicalspecificationsand includingnecessary pipeandaccessoriesupto3meterlength,excludingthenecessary excavation for installing the bio digester. Percentage of fibre glass (glass content in fibre glass should be minimum 30%): -33.33% Percentage of polyester resin: - 66.67% Water absorption (as per ASTM):-0.30% Flammability as per ASTM Tensile strength:-115 MPA Specific Gravity at 25 degree centigrade 1.45 Izod impact strength:-65KJ/M2 Heat defection/distort temperature:-65deg C Corrosion resistance (Non Corrosive) fitted with Inlet pipe size rigid PVC: -100mm Outlet pipe size rigid PVC:-80mm Gas outlet rigid PVC with Valve: 20mm Bacteriaimmobilization PVC mattes (on all partition) WithDRDOTOTlicenseeandlatestbatchcertificate(month&yearofsupply)and capacity as below b) Up to 15 user size (1.0mx1.0mx1.0m), Capacity of biodgester:-1000 liters, Area of top, bottom and side walls: - 6 sq.m, Area of partition walls: 2 sq.m, Total weight of frp: - 54 Kilogram, Bacteria inoculums quantity: - 400 liters, Minimum thickness of side walls / top and bottom: 4mm, One Number of inside partitions: - 3, Minimum thickness of partition wall: 3mm
753Providingandlayingintrenches25mmdia.heavygradehavingembossedasISI Mark galvanised iron pipes of 3.01 Kilogram/metre necessary fitting remaking good the demolished portionwithfilling trenchesandwithprimer ofanti-corrosive oilpaint , 2 coatscomplete. Including removing existing pipe line if necessaryandconveying and stacking the same in PWD chowky or as directed etc. complete.
754Providingandlayingintrenches50mmdia.heavygradehavingembossedasISI Mark galvanised iron pipes of 6.33 Kilogram/metre necessary fitting remaking good the demolished portionwithfilling trenchesandwithprimer ofanti-corrosive oilpaint , 2 coatscomplete. Including removing existing pipe line if necessaryandconveying and stacking the same in PWD chowky or as directed etc. complete.
755Providingandlayingintrenches80mmdia.heavygradehavingembossedasISI Mark galvanised iron pipes of 10.15 Kilogram/metre necessary fitting remaking good the demolished portion with filling trenches and with primer of anti-corrosive oil paint , 2 coats complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete.
756Providingandlayingintrenches100mmdia.heavygradehavingembossedasISI Mark galvanised iron pipes of 14.74 Kilogram/metre necessary fitting remaking good the demolished portion with filling trenches and with primer of anti-corrosive oil paint , 2 coats complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete.
757Providingand fixing50mmdiameter water meter with non-return valveincluding strainer,sockets/unionnutandincludingwatermeterboxmakinglockingarrangementandlock. [without chamber]
758Providingand fixing80mmdiameter water meter with non-return valveincluding strainer, sockets/unionnutandincludingwatermeterboxmakinglockingarrangementandlock.[Without chamber].
759Providingandfixing100mmdiameterwatermeterwithnon-returnvalveincluding strainer, sockets/unionnutandincludingwatermeterboxmakinglocking arrangementsandlock. [Without chamber].
760Boring/drilling bore well of 300mm dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting samples from different strata, preparing andsubmittingstratachart/borelog,includinghire&runningchargesof all equipments,tools,plants&machineryrequiredforthejob,allcompleteasper directionof Engineer in charge, upto 90m depth below ground level.
761Supplying, assembling, lowering and fixing in vertical position in bore well, unplasticized PVCmedium well-casingpipe of150mm dia,conforming toIS:12818, includingrequired hireandlabourcharges,fittings&accessoriesetc.allcomplete, foralldepths,asperthe direction of Engineer in charge.
762Cutting down trees including trunks and branches with girths above 450cm and stacking the materialsneatly with all lifts and lead of 1000m. as directedand earth filling in the depression/pit if any.
763DismantlingtheR.C.C.Work1:2:4andsortingoutthematerialssuchassteeletc.as directed and stacking them within the specified lead as directed etc. complete.
764Removingrichmixcementconcreteincludingstackingthespoilsasdirectedwithall leads, lifts etc, complete.
765Dismantlingbrickmasonryinlimeorcementmortarandstackingthematerilsas directed with all leads, lifts etc.
766Dismantling stone masonry in lime or cement mortar including stacking the materilsas directed with all leads, lifts etc.
767Removing ventilators and small windows with frame and stacking the materials with all leads, lifts etc. complete.
768Removingdoorsandwindowswithframesandstackingthematerialsasdirected withall leads, lifts etc. complete.
769Removingcementtiles,ormarbleorpolished shahabadfloorordadowithoutbed concrete including stacking the materials as directed with all leads, lifts etc. complete
770Removingurinalpansorwashhandbasinswithframeincludingdisconnectingthe sanitary and water supplyconnections, removing the same carefullyand stacking theserviceable materialsasandwheredirectedincludingthrowingtheunserviceable materialsoutsideetc complete
771Removing W.C. pans including disconnecting the sanitary and water supply connections, removing and breaking flooring and bed con-crete around pan removingthe samecarefullyandstacking the serviceable materials as adnwhere directed includingthrowingthe unserviceablemateriaslsoutsideetc.carefullyandthrowing outtherefusaloutsideetc. complete.
772Removing Queen Post truss from roof and stacking the materials as directed with all leads and lifts etc. complets
773Removingpurlinsfromroofincludingstacking asdirectedwithallleads,liftsetc. complete.
774RemovingG.I.orA.C.sheetroofingincludingpurlins,principalraftersetc.including sortingserviceable and unserviceable materials, stacking the same as and where directedinthe compound including scaffolding etc. complete.
775Disposing of dismantling material of R.C.C./ stone/ brick masonary/ debris, excavated material etc. from work site beyond the 5 Kms etc. complete

AI Tender Summary

OUR REF NO 36850960
AUTHORITY Local Bodies
TENDER VALUE 19.55 Crore
LAST DATE 31-03-2023
Authority
Authority Name Directorate Of Municipal Administration
Work Description Construction Of Administrative Building Phase 1St For Muncipal Council Sillod At Survey No. 4 At Sillod Tq. Sillod
Basic Detail
Tender No MCS/Civil/TNo.08/2022-23/262
Bidding Type Tender
Location
City sillod
State Maharashtra
Key Dates
Publish Date 17 Mar 2023
Submission Date 31 Mar 2023
Open Date 01 Apr 2023
Finance
Tender Value 19.55 Crore
Tender Fee 3540
EMD 9.78 Lakhs
Exemption Not Available
Document List
0bb1a3dd-e55f-4ab8-959d-6032a5bfbfa0.html
BOQ_1541126.xls
SBDUpld.pdf
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Mar 17, 2023
11:30 IST

Tender Published

Tender notice published.

Completed
Mar 31, 2023
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Completed
Apr 01, 2023

Bid Opening Date

Technical bids will be opened and evaluated.

Completed

Tender Documents

Download All (ZIP) ↓
html

0bb1a3dd-e55f-4ab8-959d-6032a5bfbfa0.html

xls

BOQ_1541126.xls

pdf

SBDUpld.pdf

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender

TenderDetail
Loading tenders