Tender For Renovation Work Of Homeopathic Hospital, At- Mubarakpur And Saranga, Distt-Sonabhadra (U.P.)
Tender Value
22.48 Lakhs
Estimated cost
Bid Submission
21 Mar 2023
0 days left
EMD
45000
Bank guarantee accepted
Document Fee
5900
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
mubarakpur → Uttar Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Renovation Work Of Homeopathic Hospital, At- Mubarakpur And Saranga, Distt-Sonabhadra (U.P.)
BOQ
| Sl. No. | Item Description |
| 1 | Homeopathic Hospital At- Saranga |
| 2 | Scraping old white or colour wash including disposal of refuse as directed by the Engineer-in charge within a distance of 60 meters(200 feet). |
| 3 | Dismantling of existing plaster i/c disposal of refuse as directed by the Engineer-in charge. |
| 4 | Dismantling cement concrete or brick or granolithic floors including base concrete and including stacking of dismantled material as directed by Engineer -in -charge with in a distance of 60 meters (200 feet) |
| 5 | Class-150 brick work in 1:6 cement and coarse sand of 2.25 F.M. mortar in super-structure above plinth level up to floor two level (up to two storeys)including supply of all materials, labour, tools and plants etc. required for proper completion of the work. (1:6 cement & coarse sand). |
| 6 | 15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix : 1:4 (1 cement: 4 coarse sand) |
| 7 | Providing and laying cement concrete 1:4:8 (1 cement :4 coarse sand :8 graded Stone aggregate 40 mm nominal size) not less than strenght of M150 stone ballast,including cost of form work in foundation & floors. |
| 8 | Providing and laying vitrified floor tiles Kajaria / KERRO Brand or equivalent brand in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), including grouting the joints with white cement and matching pigments etc., complete. (size of tiles 600x600mm) |
| 9 | Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), including pointing the joints with white cement and matching pigment etc, complete. |
| 10 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. |
| 11 | Providing and laying cement based water proofing treatment including preparation of surface as required for treatment of roofs, balconies, terraces etc consisting of following operations: a) Applying a slurry coat of neat cement using 2.75 kg/sqm of cement admixed with water proofing compound conforming to IS. 2645 and approved by Engineer-in-charge over the RCC slab including adjoining walls upto 300 mm height including cleaning the surface before treatment. b) Laying brick bats with mortar using broken bricks/brick bats 25 mm to 115 mm size with 50% of cement mortar 1:5 (1 cement : 5 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge over 20 mm thick layer of cement mortar of mix 1:5 (1 cement :5 coarse sand ) admixed with water proofing compound conformingWith average thickness of 120 mm and minimum thickness at khurra as 65 mm. (Rate-.88) |
| 12 | Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade :: - New work (Two or more coats applied @ 1.43 ltr/ 10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/ 10 sqm) |
| 13 | Distempering (Two coat) with oil bound distemper of approved brand and manufacture & of required shade on undecorated wall surface to give an even shade over & including a priming coat with cement primer of approved brand & manufacture such as Berger,J&N, Shalimar, Asian paints after thoroughly brushing the surface free from mortar droppings & other foreign matters & also including preparing the surface even with plaster of paris or approved synthetic material & sand papered smooth including cost of all materials. |
| 14 | Painting two coat over priming coat (but including cost of priming coat) on steel and other metal surfaces up to 10 cm. width or girth or small articles not exceeding 0.10sqm in area white superior synthetic enamel such as LUXOL3,Hi-gloss apcolite superlac, DULUX specified brushing to give an even shade and including cleaning the surface of all dirt,dust and other foreign matter sand papering and stoping including cost of all materials, labour tools and plants etc. required for proper completion of the work. |
| 15 | Mild steel or iron work of small sizes and sections such as holding down bolts, hold fast tierods,gratings etc. ( when not included in an over all rates) wrought to required from including supply of steel and its wastage including cost of bolts, nuts if required for and welding, grinding and making holes as required completion of work fabrication of holes doors, chaukhats grill, z-section. |
| 16 | Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primerUsing M.S. angels 40x40x6 mm for diagonal braces. Using flats 30x6mm for diagonal braces and central cross piece(Rateof .8222) |
| 17 | Providing & fixing white vitreous china wash basin with C.I. brackets painted white, 15 mm C.P. brass pillar taps, C.P. brass chain with rubber plug, 32mm C.P. brass waste of standerd pattern including cutting & making good the walls wherever required. |
| 18 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. |
| 19 | Providing and fixing 600x450mm bevelled edge mirror of superior glass (of approved quality) complete with 6mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. |
| 20 | Providing and fixing white vitreous china flat back half stall urinal of size 580*380*350mm with white PVC automatic flushing cistern, with fittings, standard size C.P. brass flush pipe, spreaders with unions and clamps (all in D.P. brass) with waste fitting as per IS : 2556, C.I. trap with outlet grating and other couplings in C.P. brass including painting of fittings and cutting and making good the walls and floors wherever required: |
| 21 | Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms. |
| 22 | 600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 gms. |
| 23 | Providing and fixing unplasticised PVC connection pipe with brass unions |
| 24 | Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 |
| 25 | Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards andweighing not less than 690 gms. |
| 26 | Providing and fixing C.P. brass angle valve for basin mixer and gyser points of approved quality conforming to IS:8931 |
| 27 | Providing and laying cement concrete 1:5:10(1 cement : 5 coarse sand : 10 graded stone aggregate 20mm nominal size)around P.V.C Soil and waste pipe including bed concrete as per standard design(embedded in the flooring / ground) |
| 28 | Providing and fixing on wall face unplasticised-Rigid PVC rain water pipes conforming to IS: 13592 Type A including jointing with seal ring conforming to IS: 5382 leaving 10mm gap for thermal expansion. |
| 29 | Providing and fixing on wall face unplasticised PVC moulded fittings/accessories for unplasticised Rigid PVC rain water pipes conforming to IS:13592Type A including jointing with seal ring conforming to IS:5382 leaving 10mm gap for thermal expansion. |
| 30 | SHOE |
| 31 | Providing and fixing to the inlet mouth of rain water pipe cast iron grating 15 cm diameter and weighing not less than 440 grams. |
| 32 | Providing and fixing unplasticised-PVC pipe clips of approved design to unplasticised-PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with MS screws of required length including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete. |
| 33 | Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over PVC sheet 1m x 1 m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat cement,punning,rounding the edges and making and finishing the outlet complete. |
| 34 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00m spacing.This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testiang of joints complete as per direction of Engineer in Charge. |
| 35 | 20mm dia nominal outer dia pipes |
| 36 | 25mm dia nominal outer dia pipes |
| 37 | Providing and fixing gun metal gate valve with wheel of approved quality. |
| 38 | Providing and fixing brass stop cock of approved quality. |
| 39 | Providing and placing on terrace (at all floor levels)polyethylene water storage tank ISI : 12701 marked indicating the BIS License No. with cover and suitable locking arrangement and making necessary holes for inlet, outlet and over flow pipes but without fitting and base support for tank.[Sintex, Electroplast, Star, Lotus or equivalent having valid ISI license]. |
| 40 | Excavating trenches of required width for pipes, cables etc. including excavation for sockets and dressing of sides, ramming of bottoms, depth upto 1.5m including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20cm in depth including consolidating each deposited layer by ramming, watering etc. and disposing of surplus excavated soil as directed, within a lead of 50m. |
| 41 | Providing and laying cement concrete 1:5:10 (1 cement: 5 coarse sand : 10 graded stone aggregate 40mm nominal size) all roundS.W. pipes including bed concrete as per standard design |
| 42 | Providing and fixing square-mouth pvc . gully trap grade‘A’ complete with C.I. grating, brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design |
| 43 | Constructing brick masonry manhole in cement mortar 1:4 (1 cement :4 coarse sand) RCC top slab with 1:2:4 mix (1 cement :2 coarse sand :4 graded stone aggregate 20mm nominal size), foundation concrete 1:4:8 mix (1 cement :4 coarse sand :8 graded stone aggregate 40mm nominal size) inside plastering 12mm thick with cement mortar 1:3 (1 cement :3 coarse sand) finished with floating coat fo neat cement and making channels in cement concrete 1:2:4 (1 cement :2 coarse sand :4 graded stone aggregate 20mm nminal size) finished with a floating coat of neat cement complete as per standard design. |
| 44 | Erection and testing of ceiling fan and regulator for room height upto 3.5mts. including supply of 3mm thick G.I. Pipe 19mm dia duly painted, complete in all respects. |
| 45 | Erection and testing exhaust fan on the exhisting hole with suitable size of rag bolts nuts and washers etc. complete in all respects. |
| 46 | Supplyfixingofelectronic fan regulator(Modular) 120-280 V. ISImarked, on the existing switch board including making connetion, required material, labour T/P etc for proper completion of work to the satisfaction of Engineer in charge of work. |
| 47 | Supply and Ceiling fan with fan motor of AC permanent insulation, capacitor rating conforming BEE 5 star rating and IS: 374/79 and also comply with IS:1709/1984 with latest amendment. The rated voltage 220/240 volt 50Hz, 1-ph AC the fan assemble should consist of down rod blades, shackle canopies etc and with double ball breaing system |
| 48 | Supply and laying of aluminium conducter, PVC insulated armoured, served, sheeted cable 1000 bolts grade at a depth of 750mm below ground level over a cushion of 75mm thick sand alround and protected with burnt bricks on sides and top on surface, the |
| 49 | Supply & fixing of brass nickle plated compression gland for PVC insulated & armoured served sheathed, underground cable including rubber ring etc. complete in all respects. The armouring of the cable shall be properly connected with the earth as per dire |
| 50 | Supply and fixing of Palm / pin type copper tin plated cables sockets (lugs) to the cable leads, insuslating with tape and making of connections etc. complete in all respects as per direction of Engineer-Incharge. |
| 51 | Providing and Laying unplastisized rigid PVC pipe conforming to IS:13592 type A including jointing , cuttingand making good the walls & floors as per requirement. |
| 52 | Supply and erection of AC 230/250 Volts, 50 Hz exhaust fans including providing nuts, bolts, mounting frame and other accessories including connections etc. complete as required |
| 53 | Supply of14 W LED LIGHT complete in all respects as required. |
| 54 | External W/S arrangements with T.W. boring of 150 mm dia with 110 mm dia P.V.C. pipe assembly, 1.5 H.P. submersible pump including supply of all accessories starter, panel etc. & pipe arrangements etc . |
| 55 | Construction of septic tank & soakpit |
| 56 | Construction of Interlocking |
| 57 | Homeopathic Hospital At- Khajura |
| 58 | Scraping old white or colour wash including disposal of refuse as directed by the Engineer-in charge within a distance of 60 meters(200 feet). |
| 59 | Dismantling of existing plaster i/c disposal of refuse as directed by the Engineer-in charge. |
| 60 | Dismantling of brick work or stone work in lime or cement mortar and including stacking of materiali/c disposal of refuse as directed by the Engineer-in charge. |
| 61 | Dismantling Rainforced cement concrete or rainforced brick workincluding stacking of materials as directed by Engineer-in-charge with in a distance of60 meters(200 feet). |
| 62 | Dismantling cement concrete or brick or granolithic floors including base concrete and including stacking of dismantled material as directed by Engineer -in -charge with in a distance of 60 meters (200 feet) |
| 63 | 15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix : 1:4 (1 cement: 4 coarse sand) |
| 64 | Providing and laying cement concrete 1:4:8 (1 cement :4 coarse sand :8 graded Stone aggregate 40 mm nominal size) not less than strenght of M150 stone ballast,including cost of form work in foundation & floors. |
| 65 | Providing and laying vitrified floor tiles Kajaria / KERRO Brand or equivalent brand in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), including grouting the joints with white cement and matching pigments etc., complete. (size of tiles 600x600mm) |
| 66 | Providing and laying cement based water proofing treatment including preparation of surface as required for treatment of roofs, balconies, terraces etc consisting of following operations: a) Applying a slurry coat of neat cement using 2.75 kg/sqm of cement admixed with water proofing compound conforming to IS. 2645 and approved by Engineer-in-charge over the RCC slab . |
| 67 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. |
| 68 | Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade :: - New work (Two or more coats applied @ 1.43 ltr/ 10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/ 10 sqm) |
| 69 | Distempering (Two coat) with oil bound distemper of approved brand and manufacture & of required shade on undecorated wall surface to give an even shade over & including a priming coat with cement primer of approved brand & manufacture such as Berger,J&N, Shalimar, Asian paints after thoroughly brushing the surface free from mortar droppings & other foreign matters & also including preparing the surface even with plaster of paris or approved synthetic material & sand papered smooth including cost of all materials. |
| 70 | Dismantling doors or window including chaukhats with hold fasts and including stacking of material as directed by Engineer-in -charge within a distance of 60 meters |
| 71 | Painting two coat over priming coat (but including cost of priming coat) on steel and other metal surfaces up to 10 cm. width or girth or small articles not exceeding 0.10sqm in area white superior synthetic enamel such as LUXOL3,Hi-gloss apcolite superlac, DULUX specified brushing to give an even shade and including cleaning the surface of all dirt,dust and other foreign matter sand papering and stoping including cost of all materials, labour tools and plants etc. required for proper completion of the work. |
| 72 | Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), including pointing the joints with white cement and matching pigment etc, complete. |
| 73 | Painting and Writting Building Name. |
| 74 | Excavation in foundation in ordinary soil (loam clay or sand) including lift upto 1.5 meter (5fts) andlead upto 30 Mtr (100 fts)& including filling, watering and ramming of excavated earthinto the trenches or intothe space between the building & sides of foundation trenches or into the plinth and removal & disposal of surplus earth as directed by the Engineer in charge up to a distance of 30 m. (100 fts)from the foundation trenches. |
| 75 | Filling of carted earth including watering and ramming of earth etc complet of works as per direction of engineer-in-charge |
| 76 | Local Sand filling in plinth under floors including complete including lead up to 50 m and lift upto 1.5 m including cost of sand. |
| 77 | Providing & Laying in Cement concrete 1:4:8 of Stone ballast (40 mm. Nominal size ) 4 approved coarsesand : icement including supply of all material, labour and T&P etc. required for proper completion of the work and curing complete including cost of from work in foundation and floors. |
| 78 | Providing and injecting chemical emulsion for Preconstructional antitermite treatment and creating and chemical barrior under and aroundthe columns pits, wall trenches basement excavation top surface if plinth filling junction of wall and floor, along the external per meter ofbinding expension joints surrounding of pipes and conduit etc. Complete ( Plinth area of the building at ground floor only shall be measured as per I.S .6313 (part ii 1981) . Aldrine emulsifiable concentrate of any other approved material such as Hepthachlor or chloordane will be used. The rate of application of chemical emulsion shall be as follows:- |
| 79 | Providing & Laying in Cement concrete 4:2:1 of not less than strength of M-150 Stone ballast ( 20 mm. nominal size grit) ratio 2 apprroved coarse sand: 1 Cement and curing complete also including cost of formwork |
| 80 | R.C.C. work with cement approved coarse sand and 2 cm.(3/4\") guage approved stone grit in the proportion of 1:1.5:3 in lintels of doors and windows excluding supply of reinforcement and its binding but including its. fixingand bindingthe same with 24 B.W.G.G.I binding wire and including Necessary centering and shuttering etc.and also including supply of all materials, labour and T&P etc. required for proper completion of the works. |
| 81 | As in item no. 8 above but for slabs in the proportion of 1:1.5:3 in Ground Floor. |
| 82 | Mild steel or iron in plain work such as reinforced concrete or reinforced brick work (when not included in an overall rates). Wrought to required shape as necessary including bending for proper completion of the work and including supply of steel its wastage bend hooks and authorised overlapping shall be measured. |
| 83 | RCR masonary work in 1:4 cement andcoarse sand of 2.25 fineness modulousmortar infoundation including supply of all materials, labour and T & P etc required for proper completion of the work. |
| 84 | M-150 brick brick work in 1:6 cement andcoarse sand of 2.25 fineness modulousmortar infoundation & plinth including supply of all materials, labour and T & P etc required for proper completion of the work. |
| 85 | Same as in item No. 11 abovebutin super-structure, includingnecessarycutting and moulding of brick work asrequiredandincluding honey comb brick work,thickness of wall of one brick thick |
| 86 | First class brick work in 1:4 cement and coarse sand mortar in super-structer, including necessary cutting and moulding of brick work as required and including honey comb brick work, thickness of wall of half brick (4.5\") thick |
| 87 | 12 mm cement plaster with cement and fine sand of 1.25 F.M . mortar in 1:6 over brick work minimum thick ness not to be less than 3/8\" (10mm) thick including supply of all materials , labour and T & P etc. required for proper completion of the work. in single coat on Rough side (1) 1 cement : 4 fine sand in ground floor |
| 88 | Engraving Lines in the plaster of outer face wall vertically and horizontally to display the surface as stone facing as directed by the E/I including all labour and T&P etc. required for proper completion of the work. |
| 89 | Making drip coarse in sunshade or facia as per direction of Engineer-in charge. |
| 90 | 4 cm (1.5\") thick 1:2:4 plain cement concrete floor with cement, approved coarse sand and 2cm (3/4\") graded approved stone shingle laid in panels finised with 3mm (1/8\") floating coat of neat cement or cement and marble dust in 5:1 as specified without base concrete |
| 91 | 2 cm (3/4\") thick cement plaster in dedo or skirting in 1:2 consisting of one part of cement and 2parts of approved coarse sand laid in panels, finised with 3mm (1/8\") floating coat of neat cementor cement and marble dust in raertio 5:1 including supply of all materials, labour and T &P etc. required for propor completion of the work. |
| 92 | 2.5 cm (1.0\") thick 1:2:4 plain cement concrete floor with cement, approved coarse sand and 2 cm (3/4\") graded approved stone shingle laid in panels finised with 3mm (1/8\") floating coat of neat cement or cement and marble dust in 5:1 as specified without base concrete |
| 93 | Distempering (Two coat) with oil bound distemper of approved brand and manufacture & of required shade on undecorated wall surface to give an even shade over & including a priming coat with cement primer |
| 94 | Supply and fixing 6mm thick china white glazed tiles in flooring or in skirting or dado laid with 1:3 cement and approved coarse sand mortar finished with white cement slurry jointing and polishing complete including supply of all materials, labour and tool sand plants etc. |
| 95 | M.S. or Iron work of small sizes and sections such as holding down bolts, hold fast tie rods, gratings etc. wrought to required from including supply of steel bolts, nuts wastage etc and fixing required for proper completion of the work. |
| 96 | Fixing of Door, windows/ventilators chaukhats in position. |
| 97 | (a) Door chaukhats |
| 98 | (c) Ventilator chaukhats |
| 99 | Painting or varnishing new iron works in small areas or new wood work with one coat of ready mixed priming paint and one coat of approved superior quality readymixed enamel paint of varnish including sand papering, rubbing and cleading the surface and supply of all material labour T&P etc. required for proper completion of the work ( the paint to be used should confirm to I.S.I 103-1950) |
| 100 | Same as item 23 above but on new wood surface. |
| 101 | Applying a coat of residual petroleum bitumen of grade of VG-10 ofapproved quality using 1.7 kg per square metre on damp proof courseafter cleaning the surface with brushes and finally with a piece of clothlightly soaked in kerosene oil. |
| 102 | Providing and fixing ISI marked flush door shutters conforming to IS :2202 (Part I) non-decorative type, core of block board construction withframe of 1st class hard wood and well matched commercial 3 ply veneeringwith vertical grains or cross bands and face veneers on both faces of shutters: |
| 103 | Providing and laying four courses water proofing treatment with bitumen felt over roofs consisting of first and third courses of blown bitumen 85/25 or 90/15 conforming to IS : 702 applied hot @ 1.45 Kg per square metre of area for each course, second course of roofing felt type 3 grade-I (hessian based self finished bitumen felt) and fourth and final course of stone grit 6 mm and down size or peasized gravel spread at 6 cubic diameter per square metre including preparation of surface but excluding grading complete with : |
| 104 | 2 cm (3/4\") thick cement plaster in dedo or skirting in 1:2 consisting of one part of cement and 2parts of approved coarse sand laid in panels, finised with 3mm (1/8\") floating coat of neat cementor cement and marble dust in raertio 5:1 including supply of all materials, labour and T &P etc. required for propor completion of the work. |
| 105 | P/F 4mm thick float glass panes with putty/nails of Modi/equivalent I.S.I. marked quality putty, brads and springs complete. |
| 106 | Finishing with Premium Acrylic Smooth exterior paint with Silicone additives of required shade (a) New work ( Two or more coats applied @ 1.43 Ltr./10 Sqm. over and including bsae coat of water proofing cement paint applied @ 2.20 Kg/10 Sqm.) |
| 107 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. |
| 108 | Providing & fixing steainless steel sliding door bolts ISI marked required colour or shade with nuts and screws etc complete. |
| 109 | Providing and fixing stainless steel towerbolts ISI markedrequired colour or shade with nuts and screws etc complete. |
| 110 | Providing and fixing stainless steel handleISI marked required colour or shade with nuts and screws etc complete. |
| 111 | White Vitreous china Orissa pattern W.C. pan of size 580x440mm with integral type foot rests |
| 112 | Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern with manually controlled device (handle lever), conforming to IS : 7231, Parryware/ Hindware/ Seabrid /Orient (Coral) with all fittings and fixtures complete including cutting and making good the walls and floors wherever required : W.C. pan with ISI marked black solid plastic seat and lid |
| 113 | Providing & fixing white vitreous china wash basin with C.I. brackets painted white, 15 mm C.P. brass pillar taps, C.P. brass chain with rubber plug, 32mm C.P. brass waste of standerd pattern including cutting & making good the walls wherever required. |
| 114 | a)White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps |
| 115 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. |
| 116 | Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required |
| 117 | Providing and fixing unplasticised PVC connection pipe with brass unions 15 mm nominal bore |
| 118 | Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 |
| 119 | Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards andweighing not less than 690 gms. |
| 120 | Providing and fixing C.P. brass angle valve for basin mixer and gyser points of approved quality conforming to IS:8931 |
| 121 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00m spacing.This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testiang of joints complete as per direction of Engineer in Charge. |
| 122 | Providing and fixingGI pipes complete with GI fittings and clamps, including cutting and making good walls etc. (internal work). |
| 123 | Providing and fixing GI Union in GI pipes including cutting and threading the pipe and making long screws etc. complete (new work). |
| 124 | Providing and fixing gun metal gate valve with wheel of approved quality. |
| 125 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.Capcity in Per Liters |
| 126 | Wiring points for light with 1.5 sqmm.FRLSH PVC insulated single core aluminium condutor cable in PVC conduit pipe partly concealed in wall and partly laid in slab along with the reinforcement before concreting, complete with 1.5 sqmm.FRLSH PVC insulated multistrand copper conductor cable as earth continuity wire and piano type switch etc. complete in all respects. |
| 127 | Same as item No. (1) but for fanandlight duty exhaust fan. |
| 128 | Same as item No.(1) but for5amp plug point with piano type switch and socket etc. |
| 129 | Addition for light / fan points with modular type switchin place of piono type switch. |
| 130 | Addition for plugpointswith modular type switchin place of piono type switch. |
| 131 | Supply & wiring of submains with 2 nos. 2.5 sq.mm & with 1 no. earth wire of 1.5 sq.mm FRLSH PVC insulated 1100 V grade single core multistrand copper conductor cable in existing PVC conduit complete, including supply of all material, labourand T&P etc. required for proper completion of the work as directed by Engineer I/C. |
| 132 | Supply and wiring of submain 2 number 4 sqmm . FRLSH PVC insulated 1100 V grade multistranded single core copper conductor cable in heavy duty( 2 mm thick ) 20mm dia PVC conduit partly concealed in wall and partly laid in slab along with one number 2.5 sqmm FRLSH PVC insulated multistranded copper conductor. |
| 133 | Supplyfixingand concealing of20mm dia.2mm thick PVC conduit pipe with ISI mark embossed and with PVC acessories confirming to IS No. 3419 for drawing wires duly sealed at joints with original resin/ adhesive to make the complete piping rigid,plastering with cement sand mortar finished to level with matching colour including cost of material labour and T & P etc required for proper completion of work . |
| 134 | Erection and testing of ceiling fan and regulator for room height upto 3.5mts. including supply of 3mm thick G.I. Pipe 19mm dia duly painted, complete in all respects. |
| 135 | Erection and testing exhaust fan on the exhisting hole with suitable size of rag bolts nuts and washers etc. complete in all respects. |
| 136 | Supplyfixingofelectronic fan regulator(Modular) 120-280 V. ISImarked, on the existing switch board including making connetion, required material, labour T/P etc for proper completion of work to the satisfaction of Engineer in charge of work. |
| 137 | Supply and Ceiling fan with fan motor of AC permanent insulation, capacitor rating conforming BEE 5 star rating and IS: 374/79 and also comply with IS:1709/1984 with latest amendment. The rated voltage 220/240 volt 50Hz, 1-ph AC the fan assemble should consist of down rod blades, shackle canopies etc and with double ball breaing system |
| 138 | S/F of single light wall bracket on matching M.D.F.E.G..board base etc. complete in all respects. |
| 139 | Supply & fixing of LED Tube Light with batten suitable for up to 1 x 22 watt LED tube light complete including tube etc on surface complete in all respects.(CAT: AAA) |
| 140 | Supply & fixing of LED Tube Light with batten suitable for up to 2 x 22 watt LED tube light complete including tube etc on surface complete in all respects.(CAT: AAA) |
| 141 | Supply & fixing of 36 Watt to 46 Watt above 3300 leumin indoor recess mounting LED square fitting for Armstrong Ceiling having Poweder coated die cast aluminium housing body with extended heat sink and diffuser of Special Polycarbonate meterial and driver set complete in all respect.(CAT: AAA) |
| 142 | Supply of Mirror LightFixture suitable for 14 W LED LIGHT complete in all respects as required. |
| 143 | Supply and fixing of surface/flush mounting distribution boards with additional metal door withot MCB complete in all respects. |
| 144 | Supply and fixing of 6Amp to 32 Amp(10 KA) MCB in existing MCB, DB complete with connections as required. |
| 145 | Supply fixing and making connection of following FPMCBS complete in all respects as per direction and satisfaction of engineer-in-charge. |
| 146 | Supply and fixing of power plug with 20A/250 V flush type modular switch and 5 Pin 20 A/250V flush type universal modular socket switch on concealed M.S. box including supply of all material, labour T&P etc. required for proper completion of work. |
| 147 | Supply and fixing Single Pole MCBS Blanking Plate complete in all respects. |
| 148 | Supply and laying of aluminium conducter, PVC insulated armoured, served, sheeted cable 1000 bolts grade at a depth of 750mm below ground level over a cushion of 75mm thick sand alround and protected with burnt bricks on sides and top on surface, the |
| 149 | Supply & fixing of brass nickle plated compression gland for PVC insulated & armoured served sheathed, underground cable including rubber ring etc. complete in all respects. The armouring of the cable shall be properly connected with the earth as per dire |
| 150 | Supply and fixing of Palm / pin type copper tin plated cables sockets (lugs) to the cable leads, insuslating with tape and making of connections etc. complete in all respects as per direction of Engineer-Incharge. |
| 151 | Supplying and fixingfollowing size/modules, GI box along with modular base& cover plate for modular switches in recess etc as required. |
| 152 | Supplying and fixing following modular switch/ socket on theexisting modular plate & switch box including connections but excluding modular plate etc as required. |
| 153 | Supply and burying of 600mm x 600 mmx6mm Copper plate, vertically for earthing with its top atleast 3 mts. below ground level complete with 20mm G.I.pipe and funnel for watering and one earthing leads of one No. 8 SWG copper.wire in 15mm dia G.I. pipe upto switch board (from apron to switch board the cost of G.I. pipe and Copper wire will be extra) 30cm. square C.I. frame with hinged cover, masonary housing, alternate layers/of charcoal/ coke and salt at least 150mm thick alround etc. complete in all respects. |
| 154 | Supply & fixing of one number 8 SWG G.I. wire in 15mm dia G.I. Pipe of earthing, laid in ground or in wall duly conceale including the cost of cement, sand, labour, T&P other material required for proper comletion of the work as directed at site.(S.I. No. 721) |
| 155 | Providing and Laying unplastisized rigid PVC pipe conforming to IS:13592 type A including jointing , cuttingand making good the walls & floors as per requirement. |
| 156 | Supply and erection of AC 230/250 Volts, 50 Hz exhaust fans including providing nuts, bolts, mounting frame and other accessories including connections etc. complete as required |
| 157 | Supply and fixing exaust louvers 12 inch dia. complete as required |
| 158 | Supply of14 W LED LIGHT complete in all respects as required. |
| 159 | External W/S arrangements with T.W. boring of 150 mm dia with 110 mm dia P.V.C. pipe assembly, 1.5 H.P. submersible pump including supply of all accessories starter, panel etc. & pipe arrangements etc . |
| 160 | Construction of septic tank & soakpit |
| 161 | GST extra as per applicable |
AI Tender Summary
Tender Timeline
Mar 15, 2023
11:30 IST
Tender Published
Tender notice published.
CompletedMar 21, 2023
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedMar 21, 2023
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender