Emergent Repair Of Panarhat Stackyard Building Boundary Wall Under Falta E.P.Z Highway Sub-Division Of Diamond Harbour Highway Division In The District Of South 24 Parganas During The Year 2022-2023.
Tender Value
3.60 Lakhs
Estimated cost
Bid Submission
23 Mar 2023
0 days left
EMD
7220
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
falta → West Bengal
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Emergent Repair Of Panarhat Stackyard Building Boundary Wall Under Falta E.P.Z Highway Sub-Division Of Diamond Harbour Highway Division In The District Of South 24 Parganas During The Year 2022-2023.
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling R.C. floor, roof, beams etc. including cutting rods and removing rubbish as directed within a lead of 75 m. including stacking of steel bars. |
| 2 | Taking out Mirzapur or glazed porcelain tiles carefully bychiselling from walls or floor including stacking serviceable material as directed. |
| 3 | Dismantling E.P. or Anglo-Indian W.C. |
| 4 | Single Brick Flat Soling of picked jhama bricks including ramming and dressing bed to proper level and filling joints withlocal sand. |
| 5 | Ordinary cement concrete ( mix 1:1.5:3 ) M-20 with graded stone chips ( 20 mm. down ) excluding shuttering and reinforcement.if any, in ground floor as per relevant I.S. codes. Pakur Varity. |
| 6 | Neat cement punning about 1.5mm thick in wall, dado, window sill, floor etc. NOTE:Cement 0.152 cu.m per 100 sq.m. |
| 7 | Stripping off worn out plaster and raking out joints of walls, celings etc. upto any height and in any floor including removing rubbish and stacking anywhere within the compound as directed. |
| 8 | Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints or rougening of concrete surface, including throating, nosing and drip course where necessary (ground floor). (ii) with 1:4 cement morter.i) 15 mm. thick plaster (4:1) |
| 9 | Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints or rougening of concrete surface, including throating, nosing and drip course where necessary (ground floor). (ii) with 1:4 cement morter.ii) 20 mm. thick plaster (4:1) |
| 10 | Panel shutters of door and window, as per design (each panel consisting of single plank without joint), including fitting and fixing the same in position but excluding the cost of hinge and other fittings. In ground floor. (In case of non-supply of single plank, penal rate of reduction of 20% will be made)(iv) 25mm thick shutters with 12mm thick panel of size 30 to 45 cm.(b)Sisu, Gamari, Champ, Badam, Bhola, Mogra, Hallak. |
| 11 | Taking out shutter of door and window, dismantling by parts (for repair or replacement of damaged parts) , reassembling and refitting and rehanging same with old fittings but with new screws as necessary. (Where different parts of same shutter are renewed under different item, payment under item 73 will be made once only). |
| 12 | Styles and rails of wooden shutters fitted and fixed complete. (Payment to be made on area of new work only). In Ground Floor:(ii) 25mm Thick shutter.(b) Sishu, Gamar, Champ,Badam,Bhola, Mogra, Hallak. |
| 13 | Wood work in door and window frame fitted and fixed in position complete including a protective coat of painting at the contact surface of the frame exluding cost of concrete, Iron Butt Hinges and M.S clamps. (The quantum should be correted upto three decimals). (b) Sishu, Gamar, Champ,Badam,Bhola, Mogra, Hallak. |
| 14 | Supplying, fitting and fixing M.S. clamps for door and window frame made of flat bent bar, end bifurcated with necessary screws etc. by cement concrete(1:2:4) as per direction. (Cost of concrete will be paid separately)(b) 40mm X 6mm, 200mm Length |
| 15 | Iron butt hinges of approved quality fitted and fixed with steel screws, with ISI mark(vii) 100mm. X 58mm. X 1.90mm.Add Extra 30% for Oxidised Fittings) |
| 16 | Iron pad bolt (lock) of approved quality rod and handle single cast:(ii) 200mm x 16mm dia rod 105mm x 3mm plate |
| 17 | Iron hasp bolt of approved quality fitted and fixed complete (oxidised) with 16mm dia rod with centre bolt and round fitting. 250 mm long |
| 18 | Iron door handle of approved quality fitted and fixed complete: (ii) 150mm x 5.5mm |
| 19 | Iron socket bolt of approved quality fitted and fixed complete.(c) 150mm long x 10mm dia bolt. |
| 20 | Supplying, fitting and fixing best quality Indian make mirror 5.5 mm thick with silvering as per I.S.I. specifications supported on fibre glass frame ofany colour, frame size 550 mm X 400 mm. |
| 21 | Supplying, fitting and fixing Anglo-Indian W.C. in white glazed vitreous china ware of approved make complete in position with necessary bolts, nuts etc. With \"P\" trap (With Vent) |
| 22 | Supplying, fitting and fixing 15 mm Twin Flush Fitting (Model Code No. B1810112 of CERA or equivalent). |
| 23 | Supplying, fitting and fixing Flat back urinal (half stall urinal) in whitevitreous chinaware of approved makein position with brass screws on 75 mm X 75 mm X 75 mm wooden blocks complete.i) Corner urinal 430mmX340mmX260 mm |
| 24 | Supplying, fitting and fixing soap holder. C) Fiber Glass |
| 25 | (i) Chromium plated Bib Cock short body (Equivalent to Code No. 511 & Model - Tropical / Sumthing Special of ESSCO or similar brand). |
| 26 | (i) Chromium plated Stop Cock (Equivalent to Code No. 513(A) & 513(B) & Model - Tropical / Sumthing Special of ESSCO or similar. |
| 27 | Supplying, fitting and fixing shower rose of approved brand and make. i)Chromium plated round shower with revolving joint (Equivalent to code no-541(N) & Model- Tropical/ Sumthing Special of ESSCO or similar brand). |
| 28 | Supplying P.V.C water storage tank of approved quality with closed top with lid (Black)- Multilayeri) 1000 Liter |
| 29 | (a) M.S.or W.I. Ornamental grill of approved design joints continuously welded with M.S, W.I. Flats and bars of windows, railing etc. fitted and fixed with necessary screws and lugs in ground floor.(ii)Grill weighing above 16 Kg./sq.mtr and above. |
| 30 | Supplying, fitting and fixing CPVC (Chlorinated Polyvinyl Chloride) pipes of approved make conforming to IS-15778: 2007 . with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted with holder bats clamps, including cutting pipes, fitting, fixing etc. complete in all respect including cost of all necessary fittings as required,jointing materials in any position above ground. (Payment will be made on the centre line measurements of total pipe line including all specials. No separate payment will be made for accesories, special. (a) For Exposed Work. (i) 20 mm dia. medium quality. |
| 31 | (a) For Exposed Work. (i) 40 mm dia. medium quality. |
| 32 | Supplying,fitting and fixing vitreous china best quality approved make wash basin with C.I. brackets on 75 mm X 75 mm wooden blocks, C.P. waste fittings of 32 mm dia., one approved quality brass C.P. pillar cock of 15 mm dia., C.P. chain with rubber plug of 30 mm dia., approved quality P.V.C. waste pipe with C.P. nut 32 mm dia., 900 mm long approved quality P.V.C. connection pipe with heavy brass C.P. nut including mending good all damages and painting the brackets with two coats of approved paint. (ii)550 mm X 400 mm size |
| 33 | Supplying, fitting & fixing 1st quality Ceramic tiles in walls and floors to match with the existing work & 4 nos. of key stones (10mm) fixed with araldite at the back of each tile & finishing the joints with white cement mixed with colouring oxide of required to match colour of tiles including roughening of concrete surface, if necessary or by synthetic adhesive & grout materials etc. (A)FloorWith Sand Cement Mortar (1:4) 20 mm thick & 2 mm thick cement slurry at back side of tiles using cement @ 2.91 Kg/Sq.m & joint filling using white cement slurry @ 0.20kg/Sq.m. (a) Area of each tile upto 0.09 Sqm(i) Coloured decorative |
| 34 | (A)WallWith Sand Cement Mortar (1:3) 15 mm thick & 2 mm thick cement slurry at back side of tiles using cement @ 2.91 Kg/Sq.m & joint filling using white cement slurry @ 0.20kg/Sq.m.(a) Area of each tile upto 0.09 Sqm(i) Coloured decorative |
| 35 | Applying Exterior grade Acrylic primer of approved quality and brand on plastered or cencrete surface old or new surface to receive decorative textured (matt finish) or smooth finish acrylic exterior emulsion paint including scraping and preparing the surface throughly, complete as per manufacturer\"s specification and as per direction of the EIC. IN GROUNG FLOOR(i) One coat on old surface |
| 36 | Applying Interior grade Acrylic Primer of approved quality and brand on plastered or cencrete surface old or new surface to receive Distemper/ Acrylic emulsion paint including scraping and preparing the surface throughly, complete as per manufacturer\"s specification and as per direction of the EIC. (In Ground Floor)ii)One Coat Solvent based interior grade Acrylic Primer |
| 37 | Protective and Decorative Acrylic exterior emulsion paint of approved quality, as per manufacturer\"s specification and as per direction of Engineer-in-Charge to be applied over acrylic primer as required. The rate includes cost of material, labour, scaffolding and all incidental charges but excluding the cost ofprimer.In Ground floor (Two Coat) Normal Acrylic Emulsion. |
| 38 | Applying Acrylic Emulsion Paint of approved make and brand on walls and ceiling including sand papering in intermediate coats including putty (to be done under specific instruction of Superintending Engineer) : (Two coats) i) Standard Quality |
| 39 | (a) Priming one coat on steel or other metal surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc. |
| 40 | (b) Priming one coat on timber or plastered surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc. |
| 41 | (A) Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary :(b) On steel or other metal surfaceWith super gloss (hi-gloss)(iv) Two coats (with any shade except white) |
| 42 | (a) On timber or plastered surface :With super gloss (hi-gloss)(iv) Two coats (with any shade except white) |
| 43 | GST @ 18.00% over Sl. No. 1 to Sl. No. 42 |
| 44 | LWC @ 1.00% over Sl. No. 1 to Sl. No.42 |
AI Tender Summary
Tender Timeline
Mar 16, 2023
11:30 IST
Tender Published
Tender notice published.
CompletedMar 23, 2023
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedMar 27, 2023
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender