Tender For Mgnregs Material Supply
Tender Overview
Project Description
Tender For Mgnregs Material Supply Mgnregs Material Supply -Shg Work Shed , Work Shed , Stone For Masonry Work , Through And Bond Stone Size 24 X 24 X 39Cm , Sundries , Laterate Stone Of Size 40X20x15cm , Portland Cement , Coarse Sand ( Zone Iii ) , Wall Form Panel 1250X500 Mm , Corner Angle 45X45x5 Mm 1.50 M Long , 100 Mm Channel Shoulder 2.5 M Long , Double Clip ( Bridge Clip ) , Single Clip , M.S. Tube 40 Mm Dia , Stone Aggregate ( Single Size ) :20 Mm Nominal Size , Stone Aggregate ( Single Size ) : 10 Mm Nominal Size , Hire Charges Of Concrete Mixer 0.25 To 0.40 Cum With Hopper , Vibrator ( Needle Type 40 Mm ) , Average Rate Of Mild Steel Round Bars For Reinforcements , Stone Aggregate ( Single Size ) : 40 Mm Nominal Size , Mild Steel Tubes Electric Resistant Or Induction Butt Welded , Mild Steel Round Bar 12 Mm Dia And Below , Flats Up To 10 Mm In Thickness , Bright Finished Or Black Enameled Mild Steel Butt Hinges 100X58x1.90 Mm , Fine Sand ( Zone Iv ) , G.I Pipes 50 Mm Dia , G.I. Pipes 40 Mm Dia , Red Oxide Zinc Chromate Primer , Welding By Electric Plant , Galvanised Steel J Or L Hooks 8 Mm Dia , Bitumen Washer , G.I. Plain Washer Thick , Precoated Aluminium Trafford Sheet 0.450Mm Thick , Vitrified Floor Tile 60X60 Cm , Water Thinnable Cement Primer For Interior Wall Surface, Having Voc Content Less Than 50 Gms / Litre , Plastic Emulsion Paint
BOQ
| Sl. No. | Item Description |
| 1 | WORK SHED |
| 2 | Stone for masonry work |
| 3 | Through and bond stone size 24 x 24 x 39cm |
| 4 | Sundries |
| 5 | laterate stone of size 40x20x15cm |
| 6 | Portland Cement |
| 7 | Coarse sand (zone III) |
| 8 | wall form panel 1250x500 mm |
| 9 | Corner angle 45x45x5 mm 1.50 m long |
| 10 | 100 mm channel shoulder 2.5 m long |
| 11 | Double clip (bridge clip) |
| 12 | Single clip |
| 13 | M.S. Tube 40 mm dia |
| 14 | Stone Aggregate(single size):20 mm nominal size |
| 15 | Stone Aggregate(single size): 10 mm nominal size |
| 16 | Hire charges of Concrete Mixer 0.25 to 0.40 cum with Hopper |
| 17 | Vibrator (Needle type 40 mm) |
| 18 | Average rate of mild steel round bars for reinforcements |
| 19 | Stone Aggregate(single size): 40 mm nominal size |
| 20 | Mild steel tubes electric resistant or induction butt welded |
| 21 | Mild steel round bar 12 mm dia and below |
| 22 | Flats up to 10 mm in thickness |
| 23 | Bright finished or black enameled mild steel butt hinges 100x58x1.90 mm |
| 24 | Fine sand (zone IV) |
| 25 | G.I pipes 50 mm dia |
| 26 | G.I. pipes 40 mm dia |
| 27 | Red oxide Zinc chromate primer |
| 28 | Welding by electric plant |
| 29 | Galvanised steel J or L hooks 8 mm dia |
| 30 | Bitumen washer |
| 31 | G.I. Plain washer thick |
| 32 | Precoated Aluminium Trafford sheet 0.450mm thick |
| 33 | Vitrified floor tile 60x60 cm |
| 34 | Water thinnable cement primer for interior wall surface, having VOC content less than 50 gms/litre |
| 35 | Plastic emulsion paint |
AI Tender Summary
Tender Timeline
Tender Published
Tender notice published.
CompletedBid Submission Deadline
Online submission via eProcurement portal.
CompletedBid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender