|
| 1 | Dismantling and removing mangalore roofing tiles from roofs including ridges, hips, valleys, sheets wind ties etc. but excluding battens, roof timber etc. and stacking materials within a distance of50 mt. |
| 2 | Dismantling the tile work in floors and roofs laid in cement including stacking of materials within 50 meters lead for thickness of tiles 10mm to 25mm. |
| 3 | Providing and fixing 1st quality ceramic glazed wall tiles (Johnson, Somany, Kajaria )conforming to IS:15622 (thickness to be specified by the manufacture of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-charge in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand ) and jointing with grey cement slurry @3.3kg per sq.m including pointing in white cement mixed with pigment of matching shade completec)Wall Ceramic Glazed Tiles : 300 x 600 |
| 4 | Colour glazed tiles 6 mm thick in skirtings risers of steps, dado laid on a bed of 12 mm thick cement plaster 1:3 (1 cement : 3 coarse sand ) jointed with white cement slurry. |
| 5 | Repairs to plaster in patches of 2.5 sq.m. and under including cutting the patch in proper shape and preparing and plastering the surface of the walls complete including disposal of rubbish to the dumping ground within 50m lead.With cement mortar 1:4 (1 cement : 4 fine sand) |
| 6 | Removing white or colour wash by scrapping, sand papering and preparing surface smooth including necessary repairs to scratches etc. Complete |
| 7 | Applying one coat of cement primer of approved brand and manufacture on wall surface. |
| 8 | Painting one or more coats of acryllic exterior paint of approved brand and manufacture(Such as Dulex/ Asian Paints/ Sherwin Willians) on old work including cleaning the surface with water etc. complete. |
| 9 | Distempering (one/ more coat) with oil bound washable distemper of approved brand and manufacture and of required shade on old work to give an even shade. |
| 10 | Dismantling wood work of sectional area 40 sq.cm. and above wrought framed and fixed in frames, other frames and trusses including stacking of material within 50 mts. lead (span upto 10 mtrs.) |
| 11 | Providing woodwork in frames of doors, windows, clerestory windows trusses & other frames wrought framed and fixed in positon. b) Second class Indian teak wood |
| 12 | Providing & fixing flush door shutters decoration type core of block board construction with frame of first class hard wood and well matched first class Indian teak ply veneering with vertical grains and cross bands and face veneers on both faces of shutters. b)35mm thick including anodized aluminium butt hinges with necessary screws: |
| 13 | Providing and Fixing Mirrior over a 10mm plywood board including cutting, bevelling the edges of the mirrior as per required size and dimension including all necessary fittings etc. and as per directed by the Engineer – in – charge. |
| 14 | Providing and fixing M.S. grill of required pattern in wooden frames of Windows etc. with M.S. flats square or round bars with round headed bolts and nuts or by by screws. |
| 15 | Providing and fixing prefabricated compound gate of G.I. pipes 40 – 50 mm dia (medium) with 12mm M.S. square bars of G.I. pipes grill work as per drawing including providing & fixing locking arrangements, pintals, hold fast embedded in cement concrete 1:2:4 (1 cement: 2 coarse sand : 4 granitic or basaltic aggreate 20mm nominal size) including applying priming coat with ready mixed red lead paint and painting 2 or more coats with superior ready mixed paint of approved brand and manufacture in all shades as per direction complete. |
| 16 | Steel work in built up tubular (round, square or rectangular hollow tubes etc.) (Square Hollow Section (SHS) IS4923 /Rectangular Hollow Section (RHS) IS4923/ Circular Hollow Section (CHS) IS1161 closed Structural Steel of (SAIL, TATA. VIZAG, JSW ,APOLLO Steel Ltd.) make (Min Yeild Stress 310 Mpa)) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. |
| 17 | Providing and fixing colour coated galvulium roofing sheets of 0.5mm thickness including all the accessories (TATA make) but excluding the cost of purlins, rafters, trusses, flashings etc. complete as per the directions of the Engineer in charge. |
| 18 | Applying priming coat with ready mixed red lead paint of approved brand and manufacture on steel work. |
| 19 | Painting one or more coats with superior quality ready mixed paint of steel work of approved brand & manufacture in all shades on old work to give an even shade. |
| 20 | Providing and fixing Hand Shower (Health Faucet) with 8mm dia, ABS/brass body with double lock 1.00m long Flexible tube (Brass plated stainles steel flexible hose) and wall hook of approved quality confirming to IS standards. |
| 21 | Providing and fixing NICKEL chrome plated copper alloy Fancy long body bib cock with wall flance Jaquar make or equivalent. Confirming to IS 8931;1993 |
| 22 | Providing and fixing NICKEL chrome plated copper alloy Fancy concealed stop cock with slinding flance 15 mm Jaquar make or equivalent. Confirming to IS 8931;1993a) 15mm nominal bore |
| 23 | Providing and fixing P.V.C. connection pipe with brass unions 15 mm nominal bore:c) 45 cm (18”) length . |
| 24 | Providing and fixing NICKEL chrome plated copper alloy Fancy Pillar Cock rocket type Jaquar make or equivalent. Confirming to IS 8931;1993 a) 15mm nominal bore |
| 25 | Providing and fixing 10 litres pvc. Automatic flushing cistern with fittings. |
| 26 | Providing and fixing chlorinated polyvinyl chloride (CPVC) pipes confirming to IS: 15778 having thermal stability for hot and cold water supply includng all CPVC plain and brass threaded fittings CPVC solvent cement, trenching, refilling and testing of joints complete as per firectionof the Engineer in charge.(External work (heavy duty SDR 11 pipe)d)32 mm outer dia CPVC pipe |
| 27 | Providing & fixing c.p. brass towel rail complete with C.P. brass brackets fixed to wooden cleats with C. P. brass screwsb) 600 x 20 mm size |
| 28 | Providing and fixing brass full way valve (heavy) duty with wheel of approved quality :d)32 mm nominal bore |
| 29 | Providing and fixing nahani trap ofrigid PVC (approved make ) for S.W.R. pipes including lubricating etc complete, without door :(a) 110 mm dia |
| 30 | Providing and fixing vitreous china wash basin with RS or C.I. brackets painted white, 15 mm C.P. brass pillar taps C.P. brass chain with rubber plug 32 mm C.P. brass waste of pattern, 32 mm diameter M.I. or C.P. brass trap and union complete, including cutting and making good the walls where required.Flat back wash basin size 630 x 450mm with a pair of 15 mm C.P. brass pillar taps. |
| 31 | Providing and fixing C.P. brass shower rose with 15 or 20 mm. Inlet: 150 mm diameter. |
| 32 | Proving and fixing white vitreous china water closet squating (European type w.c. pan) with seat and lid, C.P. brass hinges and rubber buffers 10 lts. High level P.V.C.. flushing cistern (of approved make ) with fittings, rack bolts 32 mm diameter P.V.C. telescopic flush pipe with fit tings and clamps 25mm P.V.C.. over flow pipe with specials & mosquito proof coupling of approved municipal design and nylon. chain and pull complete, cutting and making good the walls ad floors where required. a) W.C. pan with white plastic seat and lid. |
| 33 | Providing and fixing plastic seat with lid for pedestal type WC pan with CP brass hinges rubber buffers etc. completea) White plastic seat with lid. |
| 34 | Providing and fixing flush valve (nelson or mimilar) fully chrominium plated with stop cock wall flange flush pipe or elbow and vaccum breaker coupling etc. complete For Indian or european W.C. |
| 35 | Supplying Kirloskar Mono Block Centrifugal Pump3.7KW/5HP Model KDI-520, inlet/Outlet -80mm/80mm , EL. Motor - 3Phase -415 V/3000 rpm , Body & Impler :Cast Iron , Shaft : SS ,Sealing:-Mechanical Sealwith accessories including hose coller clamps, foot valve & 10 mt pipe all complete as directed by the Engineer in Charge. |
| 36 | Supplying and installation of Divertor for shower of Jaquar make or equivalent as directed by the Engineer in Charge. |
| 37 | Supplying and installation of 150mm dia Butterfly valve as directed by the Engineer in Charge. |
| 38 | Supply and installation of over flow grattings white or blue colour of width 300mm with inter lock at center as directed by the Engineer in Charge. |
| 39 | Supplying at store or site of work including railway freight, carting, loading, unloading, stacking etc. C. I. Sluice valve conforming to IS:14846-2000 and bearing ISI mark double flanged/plain ended with cap. TYPE P.N. 1.6 (Class B )Dia 150 mm |
| 40 | Providing and fixing G.I. chain link mesh 6.35cm x 6.35 cm x 10 gauge (2.5” x 2.5” x 10 gauge) fixed with angle iron posts and struts by G.I. or M.S. staples at 20cms apart with welding with the iron posts (placed at 3 meters centre to centre) including providing barbed wire stiffeners (shall weigh 9.33 kg. per 100 meters minimum) at top and bottom with barbed wire stiffers by binding wires at 50cms centre to centre complete as per the direction of the Engineer – in – charge (angle iron posts struts, earthwork and concrete for fencing posts and struts to be paid separately) |
| 41 | Welding by electric plant (using Ador or ES4B or Deh Secheron make electrodes only ) |
| 42 | Waterproofing of sunken slabs, toilet blocks, terraces on slabs under brickbats, roofs, watertanks. Cleaning the surface and filling cracks (if any), applying EPCO ACR wherever necessary, Providing and Moistening the surface with water to render it saturated. Mix Cement and Monobond WF in the ratio of 1.25 kg to 1 by weight and stir continuously. Apply minimum 2 coats with an interval of 12 hours minimum between the coats. Fix fiber mesh while the first coat is still tacky. Cure with sprinkling of water 3-4 times a day. incl. cost of scaffolding transport etc. as per dir of EIC. All the chemicals will be of Krishna Conchem Products Pvt. Ltd. or Equivalent |
| 43 | Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FR PVC insulated copper conductor single core cable inPVC casing caping with modular switch, modular plates,suitable size modular surface box of specified Category and earthing the point with 1.5 sq.mm FR PVC insulated copper conductor single core cable etc. as required.(a) Group A-- with Cat A Modular Accessories |
| 44 | Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FR PVC insulated copper conductor single core cable in the independentPVC casing capping of appropriate size as required. |
| 45 | (a) 2 x 1.5 sq.mm + 1 x 1.5 sq.mm earthwire (20mm casing ) |
| 46 | (b) 2 x 2.5 sq.mm + 1 x 2.5 sq.mm earthwire (20mm casing ) |
| 47 | (c) 2 x 4 sq.mm + 1 x 4 sq.mm earthwire (20mm casing ) |
| 48 | Wiring for group controlled light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FR PVC insulated copper conductor single core cable in PVC casing cappingand earthing the point with 1.5 sq.mm FR PVC insulated copper conductor single core cable etc. as required. |
| 49 | Supplying and fixing stepped type electronic fan regulator on the existing modularplate switch box including connections but excluding modular plate etc. as required(a) Cat A |
| 50 | Supplying and fixing suitable size modular PVC box with modular plate and coverin front on surface or in recess including providing and fixing 4 nos 3 pin 5/6 Amodular socket outlet and 4 nos 5/ 6 Amodular switch connection painting etc. as required. The scope of work includes alternate arrangement, if required as per site conditions, to provide switches and sockets seperately, above and below the table respectively.( For workstations) |
| 51 | Supplying and fixing suitable size modular PVC box with modular plate and coverin front on surface or in recess including providing and fixing 2 no 6 pin 15/16 Amodular socket outlet and 2 nos 15/ 16 Amodular switch connection painting etc. as required.( For workstations) |
| 52 | Earthing with copper earth plate 600 mm x 600 mm x 3 mm thick including accessories and providing specialprotective masonry chamber as per enclosed drawing ( to be paid extra) (but without charcoal or coke and salt) as required as per the Earthing Drawing provided by the Engineer-Incharge.The scope of work includes the following: a) Excavation ofpit of size 1.0x1.0x 3.0 mtrs(min) and disposal of excavated soil. c)Watering GI pipe, 20 mm Class B,with funnel as per specs. d)Charcoal/salt as per specs ( paid seperately). e) Refilling the pit of size 1.0x1.0x 3.0 mtrs(min) with soft blackagriculture soil of minimum resistivity i/c transportation. f) Testing of earth value with earth megger and certifications of its value. g)watering arrangement(a) In soily strata( Masonry chamber not included) |
| 53 | Supplying and laying 25 mmx 5 mm GI strip at 0.5 m below ground as strip earth electrode including soldering etc. as required |
| 54 | Supplying and laying 6 SWG GIwire at 0.5 m below ground level for conductor earth electrode including soldering etc. as required |
| 55 | Supply of4 core armoured PVC/XLPE insulated, PVC sheathed aluminium conductor cable of 1.1 KV grade with ISI mark conforming to IS:1554(Part I) ,IS:7098(Part I) with latest amendments of following size. 4 Core 10 sq.mm |
| 56 | Laying of one number PVC insulated and PVC sheathed/XLPE power cable of 1.1 KV grade of size not exceeding 25 sq.mm in the existing RCC/HUME/STONEWARE Metal pipe,etc.complete as required |
| 57 | Supply and erecting of 56 inch ( 1400mm sweep) ceiling fan, double ball bearing type, , complete with all accessories.(a) Cat A |
| 58 | Supplying & erecting T8 LED 20W tube light fitting (4feet)with aluminium housing, heat sink, integrated HFelectronic driver complete( including lamp). |
| 59 | Supplying and erecting LED Flood light fitting of 200W, including lamp, with PF > 0.95,class IP 65 and above Housing of pressure die cast aluminium alloy and heat sink extruded aluminium complete per specification No FG ODF/FLS-2 |
| 60 | Supply of3 core unarmoured PVC/XLPE insulated, PVC sheathed copper conductor cable of 1.1 KV grade with ISI markconforming to IS:1554(Part I) ,IS:7098(Part I) with latest amendments of following size.3 Core 2.5 sq.mm |
| 61 | Supplying and fixing following way TPN sheet steel, double door, Verticle typeMCB distribution board 415 V on surface/ recess complete with tinned copper busbar neutral busbar earth bar dinnbar detachable gland plate interconnections phosphotized and powder painted including earthing etc. as required ( but without MCB/RCCB/Isolator)interconnection between incomer MCB and busbars of following ways (but without MCBs as required)(b) 8 way (8+24), double door, Vertical type, Cat A |
| 62 | Supplying and fixing 6 A to 32 A,C series MCB suitable for lighting and other loads of following poles in the existing MCB DB complete with connections testing and commissioning etc as required.(a) SP, Cat A |
| 63 | Supplying and fixing 63 A,C series MCB suitable for lighting and other loads of following poles in the existing MCB DB complete with connections testing and commissioning etc as required.(e) TPN, Cat A |
| 64 | Supplying and making cable end terminations with brass compression gland and copper lugs for folowing sizes of 4 Core PVC insulated PVC sheathed/XLPE aluminium conductor cable of 1.1 KV grade, completeas required.(4) 4 x 10 Sq. mm. |
| 65 | Supply and erecting of 12 inch (300 mm sweep) exhaust fan with double ball bearings, 1400 rpm, complete with all accessories.(a) Cat A |
| 66 | Supplying & erecting FRP box of size 300mm x 200mm x 125 mm, 2.7 mm thick complete on pole/wall as per specification No.CB-SB |
