Military Engineer Services-MES has published Tender For Special Repair To Certain Smq And Toilets Of Certain Living In Billets At Sncos Mess At Af Stn Utarlai. Submission Date for this Tender is 12-04-2023. Toilet Bathroom Tenders in utarlai Rajasthan. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 05-Apr-2023 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 12-04-2023 |
| Sl. No. | Item Description |
| 1 | Taking up or down the old steel / PVC tubing and connections and refixing old steeltubing and connection in new or old position for 15mm bore pipes complete all as specified and directed |
| 2 | Taking up or down the old steel / PVC tubing and connections and refixing old steeltubing and connection in new or old position for 20mm bore pipes complete all as specified and directed |
| 3 | Taking up or down the old steel / PVC tubing and connections and refixing old steeltubing and connection in new or old position for 25mm bore pipes complete all as specified and directed |
| 4 | S&F 15mm bore tubes medium grade galvanized with all fittings and fixed complete to walls (concealed) ceilings or laid in floors including taking down the old tubing complete all as specified and directed |
| 5 | S&F 20mm bore tubes medium grade galvanized with all fittings and fixed complete to walls(concealed) ceilings or laid in floors including taking down the old tubing complete all as specified and directed |
| 6 | S&F 25mm bore tubes medium grade galvanized with all fittings and fixed complete to walls(concealed) ceilings or laid in floors including taking down the old tubing complete all as specified and directed |
| 7 | S&F in repair PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets flush pipe of polyethylene of low or high density of PVC, 32mm dia for low level cistern complete all as specified and directed |
| 8 | S&F in repair stainles steel sink with drainage boardmade out of stainless steel 1.00mm thick sheet for kitchen with plugs, washers and waste, including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting unions to pipe over all size 915mmx460mm with bowl size 410mmx330mmx160mm incl waste pipe etc all as specified & directed. |
| 9 | S&F in repair Stop valves 15 mm bore fancy type, CP with long shank & cup (conncelaed type), cast copper alloy screwed down high presure, with crutch of butterfly handle, screwed both ends for iron pipe or for unions complete all as specified and directed. |
| 10 | S&F in repair 15 mmangle stop valve chromium plated fancy type complete all as specified and as directed. |
| 11 | S&F in repairs CP Bib taps 15 mm bore long body, cast copper alloy with crtuch or butterfly handle,screwed down, screwed for iron pipe or for brass ferrule fancy type complete all as specified and directed. |
| 12 | S&F in repairs Vitreous China squatting pan, `Orrisa" pattern, size 580 x440 mm white, with integral foot rests (excluding flushing cistern & flush pipe) complete all as specified and directed. |
| 13 | S&F in repair wash hand basin vitreous chinawash basin white flat back size 550x400 including supplied and fixed angle iron brakets errecting stand, CP waste coupling, waste pipe complete all as specified. |
| 14 | S&F in repair PVC connections 15mm size with PTMT nuts of length 600 mm complete all as specified and directed. |
| 15 | S&F in repair brass chromium plated shower roses with swivel joints 125mm size in square with CP long shank arm including fixing to steel pipe or union complete all as specified and as directed. |
| 16 | S&F in repair Chromium plated Towel railof 600mm long of fixed with & including CP brass screws & wooden/plastic cleats (min. weight 190gms) complete all as specified and directed. |
| 17 | S&F in repair CP Grating doom 100 mm diawith or without hole complete all as specified and directed. |
| 18 | S&F in repair fancy type long shankpillar tap of 15 mm bore, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered "Hot" or "Cold" with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed. |
| 19 | S&F in CPSoap dish, complete all as specified and directed. |
| 20 | S&Finrepairs Towel Ring of CPfixed with & including CP brass screws & wooden/plastic cleats (min. weight 90 gms) complete all as specified and directed. |
| 21 | S&F Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted & fixed in position all as specified in SSR Part I of 500 Ltrs Capacity with 20mm dia PTMT float valve incl tank cover & Dismantling water tanks andremoving to store complete all as specified and directed. |
| 22 | S&F in repair Gun-metal, globe or gate valves 20mm bore, with iron wheel head, screwed both end for iron pipe complete all as specified and directed. |
| 23 | S&F in repair600mmx450mm bevelled edge looking mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood & fixed to wooden plugs with CP brass screws & cup washers complete all as specified and directed. |
| 24 | S&F in repairs plate rack with racks and guard bars made out of stainless steel minimum 1mm thick, over all size 750mm X 600mmX250mm and assembled with using brass nuts, bolts and washers complete all as specified and as directed. |
| 25 | S&F in repairs sheet glass corner self (of 3 tier )assembly consisting of 5.5mm thick sheet glass self 15cm radius with chromium plated bracket guard and rail and fixed with CP screws and wood cleats with wall complete all as specified and directed. |
| 26 | S&F for 20-25mm dia stainless steel curtain rod with brackets and knobs at both ends as per site requirement including taking down old existing PVC conduit pipes with accessories complete all as specified and directed by Engr-in-charge.Note : The cost of brackets and knobs is deemed to be including in the quoted rate.Nothing extra shall be paid on this account. |
| 27 | S&F Coloured Non Skid ceramic tiles7 to 8mm thick joint less(squares/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm,in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed in CM(1:6) with providing of any dark color border including dismanting of old tiles complete all as specified and directed. |
| 28 | -Ditto- all as per Item above but as in skirting including 10 mm thick rendering in CM 1:4including dismantling of old tiles complete all as specified and directed. |
| 29 | S&F Coloured Non Skid ceramic tiles7 to 8mm thick (squares/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm,in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed in CM(1:6) including dismanting of old tiles complete all as specified and directed. |
| 30 | S&F glazed ceramic tiles size 450X350X7-8mm thick on vertical surface over 10mm thick rendering in CM (1:4)such as dado/skirting etc set and jointed in neat cement slurry and pointed in coloured cement to match with coloured including dismanting of old tilescompleteall as specified and directed. |
| 31 | M & L for roughening surfaces of old concrete floor by picking sweeping clean and washing down with water to remove dust etc complete all as specified and directed. |
| 32 | M&L for pre-polished machine cut Kota stone stair case tread flooring 20-25mm thicklaid over 20mm thick screed bed in CM (1:6)and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed. (Notes : only one stone piece on one trade with nosing one side) |
| 33 | M&L forpre-polished machine cut Kota stone slab stair case riser 20-25mm thick on vertical surfaces over 10mm thick cement plaster in (1:3) such as risers, skirting etc. jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing, polishing and taking down existing skirting complete all as specified and directed.(Notes : only one stone piece on one riser) |
| 34 | M&L for mirror polished machine cut kota stone slab flooring 20-25 mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing over and including 20 mm thick screed bed in cement mortar (1:6) complete all as specified and as directed Note:- The size of kota stone slab not less than 550mmx550mm (cut size except the location where balanced.) |
| 35 | M&L for rendering in cement plaster in 15 mm thick in CM 1:4 on fair faces of brick work with mixing WPC@3% by wt of cement finished fair & even including taking down the old plaster complete all as specified and directed( WPC will measurement andpaid separately). |
| 36 | M&L for 15mm thick cement plaster in CM (1:6) on other than fair faces of brick work finished even and fairwith out using extra cement including taking down the old plaster complete all as specified. |
| 37 | M&L for rendering 5 mm thick on fair faces of brick work or concrete surface of ceiling in cement mortar 1:3finished even & smooth (without using extra cement) including taking down the old plaster complete all as specified and directed |
| 38 | M&L for Dubbing out in CM 1:4 average 10mm thick on irregular face of walls/ceiling including taking down the old plaster complete all as specified and directed. |
| 39 | Supply only integral water proofing compound complete all as specified and directed. |
| 40 | M&L for preperation of newly plastered ceiling surface & applying three coat of white wash on ceiling surface complete all as specified and directed. |
| 41 | M&L for two coats of oil bound distemperon newely plasteredwall surfaces including preparation and 3mm thick wall care putty complete all as specified and directed. |
| 42 | M&L for applying two coats of white wash on old ceilingsurface including preparation of surface complete all as specified and directed. |
| 43 | M & L preparingold decorated surface of walls by complete removal of existing treatment and applying two coats of oil bound distemper with 1 mm thick wall care putty to make smooth surface complete all as specified and directed by Engr-in- charge |
| 44 | M&L for preparation of newly plastered surfaces of walls and applying two coats of cement base paint over a coat of primer complete all as specified and directed.directed. |
| 45 | M&L for preparation of old surfaces of walls by complete removal of existing treatment and applying two coats of cement base paint over a coat of primer complete all as specified and directed by Engr-in- charge |
| 46 | Taking down existing roof treatment any thickness including plastering, leaping plaster of any thickness cuting & up rooting tree roots/Vegitation growth & removing the debris outside upto 500m from the MOD land including cleaning/washing down and keeping surfaces cleancomplete for applying 10 mm thick screed bed in cement mortar 1:4 complete mixedwith 3 % water proofing compoundas per manufacturers instructions over roof top surface finished even and smooth using extra cement over 40mm thick padding in PCC (1:2:4), B-1 using 20mm graded stone aggregate and application of water proofing treatment using APP modified roof membrane over existing accessible RCC roof slab / chajjah / canopy / parapet wall to be executed through approved applicator of the membrane manufacturer with following specification etc complete all as specified and directed :- (a) Cleaning existing surface properly. (b) Applying oil bound bitumen primer @ 0.30 litre / Sqm manufactured by the same agency as that of APP membrane with a density 0.87-0.89 Kg per liter at 25 degree centigrade on prepared surface. (c) Laying not less than 3mm thick APP modified water proofing membrane weighing not less than 3.00 Kg/Sqm reinforced with non woven polyster fiber weight not less than 160gsm/Sqm using butane torch by torch application with 10cm side laps and 15cm end lap. (Note:- WPC shall be measured and paid separately under respective item here-in- before) |
| 47 | Dismantling of Stone slabs and tiles of any description or thickness in floors, aprons etc. laid bedded and pointed in any mortar complete complete all as specified and directed. . |
| 48 | M&L for 20mm thick granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like bedded over and including 20mm thick screed bed in CM (1:4) and pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed. |
| 49 | Demolition of PCC in ground floors & pavings n exc 15 cm thickness (below or above ground level)(unreinforced) complete all as specified and directed. |
| 50 | M&L for 75mm thick cement concrete type C-2 (1:3:6)(using 40 mm graded stone aggregate ) as in plinth protection and path finished even and smooth without using extra cement complete all as specified and directed by Engineer-in-Charge. |
| 51 | M&L for 40mm thick cement concrete type B-1 (1:2:4)(using 20 mm graded stone aggregate ) as in flooring even and smooth without using extra cement complete all as specified and directed by Engineer-in-Charge. |
| 52 | Takingdown chowkhats or frames with shutters (without taking off shutters from the frames exc 1.5 sq. m but n exc 4 sqm each complete all as specified and directed. |
| 53 | Taking down chowkhat with shutter (without taking off shutter from the frame) n. exc 1.5 sqm all as specified. |
| 54 | S&F solid PVC door frame of size 50x47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube supplying and fixing in door opening as per specification and drawings. |
| 55 | S&F factory made solid panel PVC door shutter 30mm thick (style ) consisting of frame made out of MS tubes for top and bottom rails MS frame shall be covered with heat moulded colour plain PVC or channel havinga PVC sheet strip of 20mm width stuch in side with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert top rail & bottom rail panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement supplying & fixing in the frame at site as per specification & drawing. |
| 56 | S&F 35mm thick 2nd class Hard wood (Hollock) Kiln seasoned and chemically pressure treated glazed & skeleton shutters, open rebated at prepared to receive glass/gauze (without sash bars) edges of framing plain, chamfered, or rounded, fitted with and incl cut and mitred beads for securing glass, gauge etc, size of members of shutters as specified in SSR Pt-I, Sec-8, clause 8.24 (a)fixed to chowkhats complete all as specified and directed. |
| 57 | S&F Plain framed, panelled shutter 35mm thick (two panel) with lock rail & panel of 9 mm B.W.P commercial ply or 12 mm veneered particle board with commercial veneering on both faces. 2nd Class HW rail & style of size as per IS: 1003 (Part I), kiln seasoned & chemically pressure treatedcomplete all as specified and directed |
| 58 | S&F factory made steel windows with side hung shutters including box type hinges with steel handle, steel peg stay, locking arrangement etc complete, one shutter with glazing bars for glass panes and other shutter without glazing bars for wiremesh, dovetailed or welded including pressed steel frame of size 80X40X1.25mm thick filled with PCC,including wire mesh,glass panes, and necessary fittings complete all as specified and directedand shown on drawings drg No CEAA/TD/120 R dated 06 June 2002 sheet no 1/4 to 4/4. Note:-(i) PCC for filling in chowkhats shall be measured and paid saperately. (ii) The cost of iron mongery and fittings as per shown on drgs shall be included in the quoted rate of this item. (iii) Gaurd bar/Grills shall be measured and paid saperately. |
| 59 | S & F factory made for box steel ventilator (with bottom portion fixed with pin headed glass pane and top portion with two top hung shutter one with pin headed glass pane and other with wiremesh including pressed steel frame of size 80 X 40 X 1.25mm thick filled with PCC complete with mild steel stay etc)including all accessaries and making the surface good including painting etc all as specifieddin Drg No. CEAA/TD/120 R dated 06 Jun 2002 Sheet No. 1/4 to 4/4. Note:-(i) PCC for filling in chowkhats shall be measured and paid saperately. (ii) The cost of iron mongery and fittings as per shown on drgs shall be included in the quoted rate of this item. (iii) Gaurd bar/Grills shall be measured and paid saperately. |
| 60 | S&F framed work such as grills, gratings etc with ends of bar shouldered and riveted or forged into spikes, framed guard bars etc and similar work conforming to Fe-290, Gde -E-165 complete all as specified. |
| 61 | S&F factory made for pressed steel frames of size 125 X 60 mm with one or more rebates including necessary fixing lugs hinges, locks strike plate etc(thickness ofsheet shall be 1.25mm) and with & including making good the plaster of wall in CM 1:4 and two coats of oil bound distamper on new surface over a coat of red oxide primer etc complete all as specified and as directed. |
| 62 | S&F MS hold fast and similar article conforming to Fe-290 Gde-E-165-0 or Fe-310-0 all as spfd. |
| 63 | M&L for PCC (1:3:6) type C-1 with using 20mm graded stone aggregated as in cill, step and for inserting hold fast of doors and windows all as specified and directed. |
| 64 | S & F 100 mm longmedium weight, stainless steelhinges. complete all as specified and directed. |
| 65 | S & F 100 mm longmedium weight, mild steel Butt hinges complete all as specified and directed. |
| 66 | S&F aluminum anodized barrel tower bolt of extruded section size of bolt 150mm complete all as specified and directed. |
| 67 | S&F aluminum handle cast type anodized 150 mm size complete all as specified and directed. |
| 68 | S&F 300mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified and directed. |
| 69 | M & L for applying two coat of synthetic enamel paints over one coat of pink primer on wooden surfaces over 10 cm width or girth including preparation new surfaces complete all as specified and directed. |
| 70 | M&L two coats of synthetic enamel paint on new steel surfaces of any description,over 10cm in width or girth, not otherwise described over one coat of red oxide primer including preparation of surfaces complete all as specified and directed. |
| 71 | Supply and fixing wire cloth 0.56mm nominal dia of wire and avg width of aperture 1.18mm complete all as specified and directed. |
| 72 | Supply and fixing in repair wire cloth 0.56mm nominal dia of wire and avg width of aperture 1.18mm complete all as specified and directed. |
| 73 | Supply and fixing3mm thick Sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each paneincluding hacking out old broken glass of any thickness complete all as specified and directed. |
| 74 | S & F Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor, Overall length of cover plate 150 mm complete all as specified and directed. |
| 75 | S & FFramed work as in doors or gates of angle or other section with gusset plates, rails,braces, etc., complete, drilled for fixing of steel sheeting or other covering. doors,etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings complete all as specified and directed. |
| 76 | M&L for one coat of synthetic enamel paint on oldsteel surfaces of any description,over 10cm in width or girth, not otherwise described including preparation of surface complete all as specified and directed. |
| 77 | S&F 18/19 mm thick Particle board, medium density, flat pressed, single layer type or three layer type with BWR type adhesive, fixed with screws to timber frame work in cupbords, almirah shutters or other placed as specified and directed by Engr-in-charge. |
| 78 | Demolition and breaking up rain water pipe(PVC, AC, or re-inforced concrete ) of sice 100mm coplete all as specified and directed. |
| 79 | S&F PVC SWR pipes 110mm bore single socketed in any length with rubber ging joints fixed to wall complete all as spd and directed. |
| 80 | S&F 110mm bore PVC (SWR) bends any radius all as specified |
| 81 | Dismantling of cast iron pipeof 100 mm bore, set in cement mortar complete all as specified and directed |
| 82 | S&F 100 mm bore cast iron, sand cast soil, waste and vent pipes, in any length with or without ears with cement joints, fixed on wall complete all as specified and directed. |
| 83 | Dismantling of cast ironpipe of 75 mm bore, set in cement mortar complete all as specified and directed. |
| 84 | S&F 75 mm bore cast iron, sand cast soil, waste and vent pipes, in any length with or without ears with cement joints, fixed on wall complete all as specified and directed.. |
| 85 | S&F in repair CI bends (T)100mm bore ( any radius ), diminishing pieces or tapers (larger bore measured) ofcomplete all as specified and directed. |
| 86 | S&F in repair CI bends (L/T)75mm bore ( any radius ), diminishing pieces or tapers (larger bore measured) ofcomplete all as specified and directed. |
| 87 | S&F in repair Cast Iron floor trap 75mm dia with grating including jointing to waste pipe fixed in cement concrete type B1 (1:2:4) complete all as specified and directed. |
| 88 | S&F Stack clamps out of 50mm by 5mm flat iron & 16mm dia round iron stays including bolts & nuts & securing ends of stays to wall or roof for 75 mm bore pipe complete all as specified and directed. |
| 89 | S&F Stack clamps out of 50mm by 5mm flat iron & 16mm dia round iron stays including bolts & nuts & securing ends of stays to wall or roof for 100 mm bore pipe complete all as specified and directed. |
| 90 | Demolition of cement concrete/lime concrete surfces of any description & in any portion not otherwise specifically provided for & removal of demolition material to a distance exc 250m and n.exc 500m complete all as specified and directed. |
| 91 | M & L for15mm thick cement plaster in CM (1:4) on floor and side walls upto the finished floor level sunken portion mixed with water proofing compound @3% by weight of cement complete all as specified and directed. Note : water compound shall be measured and paid separetely as supply only. |
| 92 | S F in repair 32mm dia bore GI spout pipe shall be provided 30cm beyond wall os surface between drainout leakage in if any the mouth of GI pipe shall have gravel to avoid chocking etc completed all as specified and directed at site. |
| 93 | M & L for two layer two component modified polymer coating.Theglass fiber mesh 2mmX2mm between 1st coat and 2nd coat shall be provided immediately after application of 1st coat of polymer modified coating separated by a gap of specified time as per manufacture instructions complete all as specified and directed at site by the Engr-in-Charge. |
| 94 | M & L for water proofing treatment to sunken roof with APP based polymeric membrane, 3 mm thick (minimum), weighing 3.0 Kg/Sqm reinforced with polyester non woven fabric (weighing not less than 160 gms/sqm) shall be applied over and including applying one coat of cold applied bituminous primer @ 0.25kg/sqm shal be applied on plastered surfaces,thereafter a layer of APP modified membrane as specified above shall be laid by torch application method and all overlaps shall be minimum 100mm width etc completed all as specified and directed at site. |
| 95 | M&L for Plain Cement concrete type D-2 1:4:8 (using 40mm thick graded stone aggregates as in foundations, sunken portion filling after carrying out satasifactory testing of CI pipes/joints and slab/walls by filling water for 72hours complete all as specified and directed. |
| 96 | M & L for 100mm thickPCC 1:2:4 type B1 (20mm graded stone aggregate ) in sunken portion,flooringcomplete all as specified and directed. |
| 97 | M&L for machine pressed, rubber moulded precast concrete colured interlocking paver block of any shape and size with grey cement and pigment confirming to IS 15658-2006 of 60mm thick M 35 grade laid, jointed including sand cushining and 100mm thick PCC, type D-2, 1:3:6, using 40mm graded stone aggregate complete all as specified and directed. |
| 98 | M&L for Chipping of slab/columns/beams/chajjas/parapet/roof projection/balcony/staircase and removing loose mortar with chisel hammer without much impact on concrete surface, clean the surface by sand blasting the surface using river sand with minium of 6 kg pressure at the nozzle or air blow by electric pressure blower by mechanical compressor, cleaning the exposed reinforcement with wire brush & appliying CICO Clean-o rust rust remover or equivalent in two coats over rusted reinforcement surface and providing anti corrosive coating with two component epoxt based zinc rich primer/Rust passivation Inhibitor coatat the rate of 5 sqm/Ltr with CICO ZINCILATE-500 or equivalent to reinforcement surface as per manufacturers instructions including all scaffolding ,machinery,tools tackels and men materials and clearing of debries complete all as specified and as directed by Engr-in-charge. Make: CICO clean-O-rust, CICO ZINCILATE-500 or equivalent in Fosroc/Dr Fixit/ACC/L&T/STPTP. |
| 99 | M & L for applying injection grouting through the nozzles. Drilling the holes of 12mm dia upto 100mm deep and fixing of nozzel of 10mm with using CICO NO.3 hardner chemicals. Inject the polymer based cement groutCICO NSPGC grout with cement to RCC wall/ceilling in adequate pressure and seal the nozzel complete as per manufacturer instruction. Item rates are inclusive of all labour, chemicals, supervision, tools and tackles and transportation etc. Required cement would be extra or charged extra, complete as per specification and as directed. .Make : CICO No. 3 NSPGC grount hardner or equivalent in Dr Fixit/Fosroc/STP. |
| 100 | M&L for applying bond coat with CICO-latex SBR or equivalent in Fosroc/Dr Fixit/STP/Sika as per manufacturer instructions, after preparing old surface of RCC to receive Polymer modified one component repair mortar or micro concrete. Laying of polymer modified one component repair mortar or micro concrete shall be completed within the overlay time of bonding coat. This bond coat act as bonding agent between old and new concrete. Item rate inclusive of all materials, labours, supervision, tools, tackles, transportation, fixing etc complete all as directed. make CICO latex SBR or equivalent in Fosroc/ Dr Fixit/STP.Note:-he Work shall be carried out upto 03 storey building or 12m ht. through authorised applicator or agent. |
| 101 | M&L for preparation the surfaceand applying20mm thick in two layer, each layer n.exc. 10mm thick with polymer modified mortar(PMM) on surface of slab/column/roof/chajjas/roof projection/balconies/staircase etc as directed with polymer modified one component repair mortar of PMM Cico Repocem or equivalent in Fosroc/ Dr Fixit/STP. inclusive of all materials, labours, supervision, tools, tackles, transportation, fixing etc complete all as directed. |
| 102 | M&L 20mm thick cement plaster in CM 1:3 mixed with and incl water proofing compound @ 100ml/50Kg of cement or as per manufacturer instructions of CICO-super or equivalent in Fosroc/ Dr Fixit/STP. Note:-he Work shall be carried out upto 02 storey building or 6m ht. through authorised applicator or agent. |
| 103 | S&F in repair Vitreous China wash down water closet pan pedestal pattern(EWC), white incl necessary fixing arrangments (excluding fixing bolts, flushing cistern and flush pipe) Plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device icluding jet spray complete all as specified and directed.. |
| 104 | M&L for Preparation of newly plastered wall surfaces and applying three coats of white wash complete all as specified . |
| 105 | M & L preparingold decorated surface of walls and applying two coats of white wash incl complete removal of existing treatment on walls all as specified and directed by Engr-in- charge |
| 106 | M & L for Cutting chases, pinning in, making good to facings in brick/stone masonry where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc. and making good, cutting exceeding 20cm girth complete all as specified. |
| 107 | S&F in repairs vitreous China bowl urinal flat back, minimum size 465 x 355 x 265/430 x 370 x340 mm ,white, complete including providing and fixing plugs, securing urinals to plugs with and including 60mm long brass screws, fixing flush pipe, grating and union for discharge pipe,waste pipecomplete all as specified. |
| 108 | Excavation in trenchesnot exceeding 1.5 metre wide & not exceeding 1.5 metre in depth for foundations, manholes, sewerage pipe lines etc n.exc 10 sqm on plan and getting out in soft / loose soil complete all as specified and as directed byEngineer-in-Charge . |
| 109 | Returning filling in, including spreading, leveling , watering & well ramming in layers not exceeding 25 cm thick each all as specified and as directed byEngineer-in-Charge. |
| 110 | Removing excavated material to a distance not exc 50 m and depositing where directed at a level not exc 1.5 m above the starting point complete all as specified and directed |
| 111 | Demolition and breaking up drain pipes SGSW,AC or reinforced concrete pipe up to and incl 200 mm bore pipes all as specified and directed by Engineer-in-Charge. |
| 112 | Material & labour for PCC 1:3:6 type C-2 using 40 mm graded stone aggregate to drain pipes incl packing under & haunching against the sides of pipe 150 mm dia ( internal) after they are laid and tested complete all as |
| 113 | M&L150 mm dia ( internal) SGSW pipes grade ‘A’ laid in trenches & jointed complete all as specified and as directed byEngineer-in-Charge . |
| 114 | M & L for Cutting into existing manholes for connecting new drains with inserting 150mm dia pipe , making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-1, smooth finished, and reforming benching as required complete all as specified and directed. |
| 115 | S&F in repair salt glazed stoneware gully traps of size 150x150 mm, square or round mouthed, type ‘P’ complete all as specified. |
| 116 | Demolition of precast RCC articles built in cement mortar including all quoins, arches, pillars, etc. and removing from site all as specified and directed. |
| 117 | M&L for pre-cast RCC (1:2:4) type B-1 (using 20mm graded stone aggregate) cover slabs for man-holes etc set in CM (1:6) complete all as specified and directed. |
| 118 | M&L TMT bar 10mm dia & over,cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends & binding with & including mild steel wire (annealed) not less than 0.9mmdia or securing with clips quality conforming to GD-I. IS-432 (Part I) |
| 119 | S & F in Joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc. (cut to ordinary lengths i.e. Within 20mm of the length indicated) I beam Fe 410 -W (Gde- E- 250) quality- A Fe- complete all as specified and directed by Engr-in-Charge at site. |
| 120 | Taking down u/s perished point wiring for light/fan /socket/power with all fittings and fixtures, tube lights complete including making good the disturbed surfaces complete all as specified and as directed. |
| 121 | M&L for Point wiring with 1.5 Sqmm FRLS, PVC insulated andunsheathed multi stranded FRLS flexible copper conductor cableand incl rigid PVC conduit concealed with pressed mild steel terminal boxes duly painted with a coat of red oxide primer fixed flushed to the wall with 3mm thick plastic laminated sheet coverofadequate size for one light or one fancontrolledby one switch incl 1.5 Sqmm FRLS, PVC insulated andunsheathed multi stranded flexible copper conductor cable as earth wire to common earth dolly, including cutting chases in brick/ block/stone masonry wall , replastering and making good to match the existing specifications complete all as specified and directed by Engr-in-charge. Note: a) Unit rate include for cutting chases for conduits and sunken boxes and making good to wall, floors etc |
| 122 | All as per Item No 122 above but for one ceiling fan/exhaust fan point controlled by one switch complete all as specified and directed. |
| 123 | All as per Item No 122 above but for one 5 Amps socket point controlled by switch on the same board with other switches complete all as specified and directed. |
| 124 | All as per Item No 122 above but for one 5 Amps socket point on independent board. |
| 125 | All as per Item No 122 above but for one bell point controlled by one bell push. |
| 126 | M&L for point wiring with 2.5 sqmm FRLS, PVC insulated andunsheathed multi strandedflexible copper conductor cable drawn and including rigid PVC concealed conduit medium grade of suitable size with pressed steel terminal boxes of adequate size fixed flushed to the wall with 3mm thickness plastic laminated sheet cover for one 3 pin socket outlet 15 Amp on independent board including continuous 2.5 sqmm FRLS,PVC insulated and unsheathed copper conductor cable(multistranded)as earth wire to common earth dolly, including cutting chases in brick wall, replastering and making good to match the existing specificationscomplete all as specified. Note: a) Unit rate include for cutting chases for conduits and sunken boxes and making good to wall, floors etc. |
| 127 | S&f switch 5 Amps piano flush type single pole one way complete all as specified and directed. |
| 128 | S&f Bell push, flush type single pole one way, 5 Amps, 240 Volts AC complete all as specified and directed. |
| 129 | S&f switch socket combination flush type 5 Amps, 2/3 pin multipurpose complete all as specified and directed. |
| 130 | S&f switch socket combination flush type 5/15 Amps 3/5 pin universal multipurpose complete all as specified and directed. |
| 131 | S&F socket outlet flush type 2/3 pin 5 Amps complete all as specified and directed. |
| 132 | S&f ceiling rose surface bakelite 65x50mm three terminal complete all as specified and directed. |
| 133 | S&f stepped type electronic fan regulator flush type on the existing phenolic laminated sheet, etc as required complete all as specified and directed. |
| 134 | S&f electronic door bell ding dong, AC 230 volts, single pole complete all as specified and directed. |
| 135 | S&f lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings complete all as specified and directed. |
| 136 | S&F in replacement LED bulb of capacity9 watts complete with all accessories base (ISI marked) all as specified & directed by Engr-in-Charge. |
| 137 | S&f LED tube light fitting 1x20W, 230V, including LED (tube rod), 4 feet batten fitting fixtures, complete with all accessories internally pre-wired and including connecting up with three core twisted flexible copper conductor cable with suitable size complete all as specified and directed. |
| 138 | S&f LED tube light fitting 1x10W, 230V, including LED (tube rod), 2 feet batten fitting fixtures, complete with all accessories internally pre-wired and including connecting up with three core twisted flexible copper conductor cable with suitable size complete all as specified and directed. |
| 139 | S&F in Replacement of sub main wiring with two run of single core (FRLS) PVC insulated and unsheathed cable with copper conductor (multistranded) having nominal area4.0 Sqmm drawn throughconduit concealed type and making electric connections including one run (FRLS) PVC insulated single core copper conductor cable 4.0 Sqmm as a earth continuity conductor drawn throughPVC conduit, including cutting chases in brick wall wherever necessary, replastering and making good to match the existing specifications including taking down old submain wiring complete all as specified and directed by Engineer-in-Charge. Note :- (i)Rates are deemed to be included cutting chases of conduit and making holes in wall/floor for passing in or through conduit (ii)Two run of4.0 sqmm single core (FRLS) PVC insulated copper conductor cable one run of 4.0 sqmm copper conductor cable (FRLS)as a earth lead will be measured as a one unit. |
| 140 | Taking down unserviceable main switch/DB/MCBs incl disconnecting from mains and making good the disturbed surfaces complete all as specified and directed. |
| 141 | S&F LED street light 20 W IP 65, with aluminium pressure die cast housing, toughened glass in the front withcomplete with all accessories internally pre-wired complete. Make: Orient Cat Pt No. LSFS-020-CF or equivalant in Crompton/Havells/Philips |
| 142 | M&L in replacement bracket for street light fitting made out of 25 mm bore pipe light grade GI tube bent to shape required, fixed with and including MS flat iron clamps, bolts, nuts, washers duly painting the bracket with two coats of aluminium paint over a coat of zinc chrome primer complete all as specified and directed. |
| 143 | S&f sheet metal enclosures single pole and neutral 8 way, 240 volts with 200 Amps rated bus bar with double fixed on flush to the wall including making the hole in the wall and fixing the DB including cement works and plastering complete all as specified and directed. |
| 144 | S&f sheet metal enclosures for fixing MCBs TPN 4 way, 415 Volts with 200 Amps rated bus bar with double door fixed on flush to the wall including making the hole in the wall and fixing the DB including cement work and plastering complete all as specified and directed. |
| 145 | S&f MCBs TPN, 240 volts 63 Amps, 10 KA complete all as specified and directed. |
| 146 | S&f MCBs single pole and neutral "C" Curve, 240 Volts 6 to 32 Amps, 10 KA complete all as specified and directed. |
| 147 | S&f MCB single pole, 240 volts 6 to 30 Amps capacity "B" curve, 10 KA complete all as specified and directed. |
| 148 | M&L for earthing complete with 600x600x6mm thick GI earth plate electrode buried directly in ground not less than 2.25mtr below GL with the top edge of the plate at a depth not less than 1.5 mtr from GL connected to GI earth lead of 4mm dia by means of nuts, bolts, washers, checknuts etc made out of galvanised iron or steel, earth wire protected by galvanised iron pipe, connected to main switch board complete including necessary earth work excavation, PCC chamber, watering pipe, funnel, wiremesh, RCC chamber cover etc complete all as specified and directed. |
| 149 | S&f exhaust fans AC single phase 230/240 V of size 230mm sweep, 1400 RPM double ball bearings heavy duty motor with louvers etc with mounting accessories like fastener grouting to wall, including electrical connection upto ceiling rose, cutting through stone masonry wall for providing opening suitable for the exhaust fan, finishing the disturbed surface making good with PCC 1:2:4 and cement mortar 1:4 etc complete all as specified and directed. |
| 150 | Supply, laying & testing cable in repair of LT XLPE insulated, screened, PVC bedded, galvanized steel strip of wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 25 Sqmm 4 core complete all as specified and directed. |
| 151 | M&L for providing tibba sand in trenches as sand cushioning to U/G cable including punning down of sand inlayer complete all as specified and directed. |
| 152 | M&L for 40 to 50 mm thick rough dressed Jodhpur type stone slab cover 25 to 30cm wide and 40 to 50 cm in length laid dry abutting each other complete all as specified and directed. |
| 153 | M&L for cutting of existing road/PCC n.exc 20cm wide and n.exc 30cm in depth for laying protecting pipe line etc and removing the debris n.exc 50m and filling with PCC 1:2:4 over the protection pipe complete all as specified and directed. |
| 154 | Supply and lay GI pipe 50mm dia, light grade ISI mark with all fittings laid in trenches, fixing in wall and pole including suitable GI clamps for bracing the pipe with pole for cable protection complete all as specified and as directed. |
| 155 | Taking down ceiling fan ,exhaust fan, dismantling blades and should be kept safe custody in store complete all as specified and directed. |
| 156 | Hanging only ceiling fan and connecting up including provision of cable from ceiling rose or connector to fan complete all as specified and directed. |
| 157 | Taking down carefully serviceable energy meter and remove to store and should be kept in safe custody complete all as specified and directed. |
| 158 | Fixing only and connecting electric meters upto 25 amps as before complete all as specified and directed. |
| 159 | Supply and fix electric water heater,storage type steel body with inner tank and heating element upto 1.5 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc. |
| 160 | Supply and fix stop valve, screwed,15 mm (1/2”) dia pipe |
| 161 | Supply and layin repair of GI pipe, medium grade 15mm bore ISI mark with all fittings laid in wallcomplete all as specified and as directed |
| 162 | S&F in replacement PVC connection 15 mm bore size with PTMT nuts,rubber washers etc complete of length 450 mm long complete all as specified. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
