Tender For Construction Of Community Bore Well Near The Land Of Nazir Ahmad S/O Haji Sharifudin R/O Chanchan Gulabpora Tehsil Lar (All Job Complete), Ganderbal-Jammu And Kashmir
TDR : 36792977
Tender Notice
BOQ
Expired
Ganderbal
Jammu And Kashmir
Tender For Construction Of Community Bore Well Near The Land Of Nazir Ahmad S/O Haji Sharifudin R/O Chanchan Gulabpora Tehsil Lar (All Job Complete)
Name of Work: Construction of Community Bore Well near the land of Nazir Ahmad S/o Haji Sharifudin R/o Chanchan Gulabpora Tehsil Lar (all job complete)
Sl. No.
Item Description
1
Cost on account of Drilling of 125mm diameter Bore well in all kinds of strata encunterd during drilling by ODEX/DTH method using air rotary unit and exploration of underground water by tapping sufficient aquifer zone up to the desired depth. The job includes lowering of 125mm dia. MS pipe up to the desired depth. The job includes cost of pipes and slotting of pipes as per the requirement. The job also includes all charges on account of using drilling accessories, slotting with tools attachment bits, labour etc and carriage of materials up to the site of work etc.
2
Providing and laying of rectangular cement concrete of 1.5*1.5and 0.3m deep in a mix coarse sand to give the adequate strength to act as a sanitary block for the well and to grout the hand pump assembly in order to make it robust to resist shock load observed while pumping in case the suitable space for the above specification is not available, the surface area is to be adjusted accordingly 1.5*1.5*0.3=0.67 and water reservoir for the distribution of water through channels 4*1.5*0.30*0.75=1.35 total 2.02cum.
3
Cement plaster with a floating cost of neat 12mm cement plaster on reservoir walls and bottom using 1:3 mix using fine sand 4*0.90*0.75=2.70 0.90*0.90=0.81 total =3.51sqm.
4
Harnessing of tube well by providing and installing of following electromechanical equipments of standard quality. A sub miserable pump motor of single phase 02 HP with motor control panel having 7 HP delta starter fitted with MCCB etc. All the equipments should be of standard quality and ISI mark supplied from standard manufacturer like KBS, Crompton, Kirloskar = 1 unit. 32mm diameter GI pipe along with elbows, nipples,sockets.reducers clamps whatever required at the site of work=40mtrs. 205 sq.mm submersible cable=50mtrs.
5
P/f of MS clamps of sizes (length16 inches, 50mm width) each duly able to hold the rising main, including nuts and bolts
We takes all possible care for accurate & authentic tender information, however Users
are requested to refer Original source of Tender Notice / Tender Document published by
Tender Issuing Agency before taking any call regarding this tender.
