Tender For Construction Of Daycare Sub Center At K Semla Of Kosagumuda Block Under Nabarangpur District For The Year 2022-23
Tender Value
38.61 Lakhs
Estimated cost
Bid Submission
28 Mar 2023
0 days left
EMD
38700
Bank guarantee accepted
Document Fee
6000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
kosagumuda → Odisha
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Construction Of Daycare Sub Center At K Semla Of Kosagumuda Block Under Nabarangpur District For The Year 2022-23
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in excavation of foundation trenches in hard soil including dressing of sides and levelling the bed up to the required depth and depositing the excavated materials away from the work site within 50m initial lead & 1.5m initial lifts with sundries & T&P required for the work complete as directed by the Engineer in charge. |
| 2 | Supplying and filling in foundation trenches and plinth, ditches with sand well watered and rammed in layers not exceeding 23 cm. in depth with all lead and lift including cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labour, sundries, T&P required for the work etc. complete in all respect as per direction by the Engineer in charge. |
| 3 | Providing and laying plain cement concrete of proportion (1:3:6) in foundation and floors using 4 cm. size black hard crusher broken granite stone metal and screened and washed sharp sand for mortar of approved quality and from approved quarry including hoisting, lowering, laying concrete, ramming, watering and curing etc. complete to required levels laid in layers not exceeding 15 cm. thick in each layer including cost, conveyance, royalties, taxes of all materials and cost of all labours, T&P etc complete as per the direction of the Engineer -in –charge. |
| 4 | Cement concrete (1:2:4) with 12mm size hard granite metal per one cum. |
| 5 | C.B Brick (23x11x8cm) size having crushing strength not less than 35kg/ cm2 with cement mortar (1:6) in foundation and plinth per cum. |
| 6 | Fly Ash Brick (23x11x8cm) size having crushing strength not less than 75kg/ cm2 with cement mortar (1:6) in foundation and plinth per cum as directed by the Engineer-in-charge. |
| 7 | R.C.C. work with M-20 grade In Different Works having minimum compressive strength in work test of 200 Kg/Cm2 at 28 days using20 mm and down graded size black hard crusher broken granite stone chips of approved quality and from approved quarry including hoisting lowering and laying concrete and compacting by using vibrators watering, curing for 28 days, centring & shuttering and finishing the exposed surface smooth providing grooves or beads where necessary in all floors including cost, conveyance, royalties and taxes of all materials , cost of all labour with cost of all T&P required for the work etc. complete in all respect but excluding cost and conveyance of M.S. rods or steel & binding wires and labour charges for strengthening, cutting, bending grills and placing in proper position. |
| 8 | Column Base |
| 9 | Plinth beam |
| 10 | Column shaft |
| 11 | Ground Floor |
| 12 | First Floor |
| 13 | 2nd floor |
| 14 | Lintel |
| 15 | Ground Floor |
| 16 | First Floor |
| 17 | Chajja (65mm Thick) |
| 18 | Ground Floor |
| 19 | First Floor |
| 20 | 2nd floor |
| 21 | Roof Beam |
| 22 | Ground Floor |
| 23 | 1st floor |
| 24 | 2nd floor |
| 25 | Roof slab |
| 26 | Ground Floor |
| 27 | 1st Floor |
| 28 | 2nd floor |
| 29 | Stair case |
| 30 | Ground Floor |
| 31 | 1st Floor |
| 32 | Straightening cutting, bending bent up or coiled rods, including cranking, hooking, welding or jointing the M.S. rods or tor confirming to I.S. 432 (Plain) and 1785 (Tor) steel and binding, tying the grills, hoisting, lowering and placing in proper position required for R.C.C. works including cost, conveyance and taxes of M.S. rods or tor steel and binding wires of 18 to 20 gauge and cost of all labour with all T&P required for the work etc. complete as directed by the Engineer- in-Charge. |
| 33 | Ground Floor |
| 34 | 1st Floor |
| 35 | 2nd floor |
| 36 | Fly Ash Brick (23x11x8cm) size having crushing strength not less than 75kg/ cm2 with cement mortar (1:6) in Superstructure per cum as directed by the Engineer-in-charge. |
| 37 | Ground Floor |
| 38 | 1st Floor |
| 39 | 2nd floor |
| 40 | Providing 16 mm thick cement plaster with cement mortar of mix (1:6) with screened and washed sharp sand for mortar and finished smooth to the rough surface of walls in all heights after racking out joints including watering and curing, rounding of corners, providing grooves where ever necessary with cost, conveyance, royalties and taxes of all materials with cost of all labour, T&P, and scaffolding required for the work etc. complete in all respect as directed by the Engineer in charge. |
| 41 | Ground Floor |
| 42 | 1st Floor |
| 43 | 2nd floor |
| 44 | 12mm thick plaster (1:4) for brick work with cement punning for skirting. Per Sqm |
| 45 | Providing 12 mm thick cement plaster with cement mortar of mix (1:6) with screened and washed sharp sand for mortar and finished smooth to the rough surface of walls in all heights after racking out joints including watering and curing, rounding of corners, providing grooves where ever necessary with cost, conveyance, royalties and taxes of all materials with cost of all labour, T&P, and scaffolding required for the work etc. complete in all respect as directed by the Engineer in charge. |
| 46 | Ground Floor |
| 47 | 1st Floor |
| 48 | 2nd floor |
| 49 | Supplying, fitting, fixing of Homogeneous tile in floors marbonite or equivalent make in all floors using Vetrified tile over 25mm thick bed of cement mortar (1:1) jointed with neat cement slurry mixed with pigment to match the shades of the tiles including cost, conveyance and taxes of all materials, cost of all labour, T&P etc. complete as per the direction of the Engineer-in-charge. |
| 50 | Ground Floor |
| 51 | 1st Floor |
| 52 | Supplying, fitting & fixing of Granite tiles on floor including of all cost, conveyance etc all complete.including cost, conveyance and taxes of all materials, cost of all labour, T&P etc. complete as per the direction of the Engineer-in-charge. |
| 53 | Ground Floor |
| 54 | 1st Floor |
| 55 | Supplying, fitting, fixing of Industrial tile in floors marbonite or equivalent make in all floors using Vetrified tile over 25mm thick bed of cement mortar (1:1) jointed with neat cement slurry mixed with pigment to match the shades of the tiles including cost, conveyance and taxes of all materials, cost of all labour, T&P etc. complete as per the direction of the Engineer-in-charge. |
| 56 | Ground Floor |
| 57 | 1st Floor |
| 58 | Providingfitting &fixing of Ceramic Tilein floor including cost, conveyance etc complete. |
| 59 | Ground Floor |
| 60 | 1st Floor |
| 61 | Providingfitting &fixing of Ceramic tilesin dado including cost, conveyance etc complete. including cost, conveyance and taxes of all materials, cost of all labour, T&P etc. complete as per the direction of the Engineer-in-charge. |
| 62 | Ground Floor |
| 63 | 1st Floor |
| 64 | Supplying, fitting and fixing of Stainless steel of 304 grade in hand railing using 50mm dia of 2mm thick circular pipe with Balustrade of size 32mm x 32mm x 2mm @ 0.90mtr. C/C and stainless square pipe bracing of size 32mm x 32mm x 2mm in 3 rows in stair case as per approved design and specification, buffing, polishing etc with cost, conveyance, taxes of all materials, cost of all labour, T&P etc. required for the complete in all respect as per direction of the Engineer-in-charge. |
| 65 | Ground Floor |
| 66 | 1st Floor |
| 67 | Supplying of M.S. Grills, M.S.Doors, M.S. Gate etc including cost,conveyance of all materials etc.complete as per the instruction of Engineer-in-Charge . |
| 68 | Ground Floor |
| 69 | 1st Floor |
| 70 | 2nd floor |
| 71 | Painting two coats with approved weather coats of approved colour, shade on wall surface over a coat of wall primer including sand papering, polishing the surface, cost, conveyances, taxes of all materials and cost of all labour with T&P etc, complete as per specification & direction of Engineer-in-charge. |
| 72 | Ground Floor |
| 73 | 1st Floor |
| 74 | 2nd floor |
| 75 | Finishing plastered surfaces of walls with cement putty (water based) of approved make and finishing the surface smooth and even by sand papering to receive paint in walls, at all heights with staging wherever necessary with cost, conveyance, taxes of all materials, cost of all labour, all T&P etc. required for the work complete in all respect as per the direction of the Engineer-in-charge. |
| 76 | Ground Floor |
| 77 | 1stFloor |
| 78 | 2nd floor |
| 79 | Plastic emulsion paint two coats of approved shade on new work. |
| 80 | Ground Floor |
| 81 | 1stFloor |
| 82 | 2nd floor |
| 83 | Painting two coats to new Iron work with approved enamel paints of approved colour, shade over a coat ofprimer including sand papering, polishing the surface, cost, conveyances, taxes of all materials and cost of all labour with T&P etc, complete as per specification & direction of Engineer-in-charge. |
| 84 | Ground Floor |
| 85 | 1st Floor |
| 86 | 2nd floor |
| 87 | Providing 2.5cm thick Grading Concrete over roof slab with cement concrete (1:2:2) using 6mm size black hard granite crusher broken chips and screened & washed sharp sand for mortar and finished smooth to the rough surface of slab including watering and curing with cost, conveyance, royalties and taxes of all materials with cost of all labour, and T&P required for the work etc. complete in all respect as directed by the Engineer in charge. |
| 88 | GroundFloor |
| 89 | 1stFloor |
| 90 | 2nd floor |
| 91 | Providing, Fitting & Fixing of 100mm dia PVC Rain water pipewith cost, conveyance, royalties and taxes of all materials with cost of all labour, and T&P required for the work etc. complete in all respect as directed by the Engineer in charge. |
| 92 | Recessed wiring to light point with 1.5 sq.mm FR PVC insulatedsingle core multistrand copper conductor of ISI marked with 20 mm dia non-metalic PVC flexible conduit with 5Amp, 250 V piano type modular switch ISI marked and ceiling rose ISI marked mounted on MS box having front Modular base & cover of suitable size , MS box with 1 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire including all accesories and connection as per direction of Engineer in Charge. ( Make of wire Finolex/ L&T / Anchor / Havels /HPL/ V Guard ) |
| 93 | -do- Group A |
| 94 | -do- Group B |
| 95 | -do- Group C |
| 96 | Recessed wiring to Fan Point in... |
| 97 | -do- Group B |
| 98 | -do- Group C |
| 99 | Recessed wiring to Call Bell Point in... |
| 100 | -do- Group B |
| 101 | Recessed wiring to Exhaust Fan Point in….. |
| 102 | -do- Group B |
| 103 | -do- Group C |
| 104 | S/F of Angle holder replacing Ceilling Rose |
| 105 | S/F of 5A. Modular Switch & 5A.Modular Socket outlet of ISI marked on existing board |
| 106 | S/F of extension board of 6 modular Metal box with modular base & cover in recess including providing and fixing of 2 nos of 3pin 5/6amp modular socket out let & 2 nos of 5/6 amp piano typemodular switch, connection, painting etc as required. |
| 107 | S/F of Power point with 4 modular metal box with modular base & cover in recess including providing and fixing of5 pin 15/16 amp. piano type Modularswitch & Socket, connection, painting etc as required |
| 108 | S/F of Power point with metal box of 180mm x 100mm x 60mm deep & 100mm×100mm ×60mm (Normal size) in recess with suitable size of phenolic laminated sheet cover in front including providing & fixing 5 pin 15/16 amp. piano type switch & Socket & 1 no of 16A mini DP MCB, connection, painting etc as requiredfor AC |
| 109 | S/F of 1 no of 5 pin 15/16 amp.Socket , 1 no of switch & 1 no of15/16A top with modular mini MCB, in 6 modular box with cover with connection, painting etc as requiredfor Inverter connection |
| 110 | S/F of 18 SWG Modular metal box of following sizes (Nominal size) in recess with suitable size of Modular base & cover in front including cutting the wall and making good the same in case of recessed conduit as required. |
| 111 | 4 Modular box with base & cover |
| 112 | 6 Modular box with base & cover |
| 113 | 8 Modular box with base & cover |
| 114 | 12 Modular box with base & cover |
| 115 | Wiring for circuit / sub-main wiring along with earth wire with following sizes of PVC insulated single core multistrand copper conductor with ISI marked conforming to IS-694/1990 in 20mm dia non metalic heavy duty flexible conduit 1.6mm in recessed PVC conduit as required (Make of wire -Finolex/L&T/Anchor/Havels/V-guard) |
| 116 | 2x1.5+1x1.0 (1.8) |
| 117 | 2x1.5+1x1.5 (1.8.1) |
| 118 | 2x2.5+1x1.5 (1.8.2) |
| 119 | 2x4+1x1.5 (1.8.3) |
| 120 | 2x6+1x2.5 (1.8.4) |
| 121 | Inverter wiring (1x1.5smm) Copper wire (1.19.1) |
| 122 | S/F of \"B/C/D\" series SP MCB of 5 - 32A amp rating (As per direction of engineer in charge)240Volt for lighting and other loads in the existing MCB Distribution board ISI marked complete with connection, testing and commissioning etc. as required single pole (SP) (2.6.1) |
| 123 | S/F of \"B/C/D\" series DP MCB of 5 - 32A amp rating (As per direction of engineer in charge)240Volt for lighting and other loads in the 2 Way double door MCB Distribution board ISI marked complete with connection, testing and commissioning etc. as required(2.6.2a)+(2.3.1b) |
| 124 | Supply, Installation testing & commissioning of Main Switches (IS13940 part 3/1993) of following coopacity on existing surface/wall mounting & complete with H.R.C fuse links, inter connections earthing etc as required as per direction of Engineer Incharge (Make-Seimens/HPL/Anchor/L&T /Havels/C&S/R. K.) |
| 125 | S/F of MCB 4 way Double Door (2.3.5 ) |
| 126 | S/F of MCB 8 way Double door (2.3.6) |
| 127 | Earthing with G.I. Earth pipe 3 mtr Long 40mm dia ISI marked including accessories & providing masonary enclosure with cover plate having locking arrangement & watering pipe with charcoal & salt as required (3.2) |
| 128 | Supply & laying 6 SWG G.I. wire in recess for loop earthing as required (3.17) |
| 129 | Providing & fixing plain 16/0.2mm twin twisted flexible, FR PVC insulated copper cable in polythene sleeve or conduit of suitable size on the floor/wall or side of the table/door etc as required.(1.31) |
| 130 | Supply, Installation, Testing & Commissioning of exhaust fan upto 450 mm sweep in the exising opening, including making the hole to suit the size of the above fan making good the damaged complete, connection, etc as required. (1.43) |
| 131 | S/F of Call bell/Buzzer(Ding dong type) ISI marked suitable for DC/AC single phase 230 volts complete as required. (1.30) |
| 132 | S/F of computer board consisting of 3 nos of 5amp modular plug and modular switch& 1 no of Mini MCB complete with wiring on 12 modularM.S. box with modularcover. |
| 133 | S/F of 18-25Watt L.E.D Tube light fittingwith all accessories and connections (Make:HPL-Neptune Havells-Elite LED Pride Plus/PAC/Crompton-RetroPLL |
| 134 | Supply of 1200mm A.C. Ceiling fan with all accessories and connections with out fan regulator (Make:Usha-Striker Millenium/Crompton-Jura /Anchor-XL/Havels-Velocity/Spark/Orient-Summer pride ) |
| 135 | S/F step type fan regulator |
| 136 | Supply & fixing of superior type C.I bulk head fitting with 9W Led Bulb for general domestic use ISI marked square / oval type with premetallic glass cover provided with galvanized steel wire guard including necessary connections. ( M-5 ) |
| 137 | Supply & Fixing of 20-25 Watt single L.E.D street light fittingwith LED & Electrinic driver including all accessories and connections (Make:Crompton/Phillips/HPL/Polycab/Havells) |
| 138 | S/F of electronic 9w Watt LED Bulb |
| 139 | S/F of fan hook \"S\" type made of 16 mm MS rod for fixing in the Existing RCC Roof. |
| 140 | S/F of 2000 VA UPS with double tubular 150 AH battery. Make: Luminous or equivalent. |
| 141 | Supply & fixing of 63 A TPN Panel board1.63A MCCB (Make- Legrand/Seimens/L&T/C&S/) &100A kitkat & bus bar2. 63 A DP MCB (Legrand/Seimens/L&T/C&S)- 3nos 3. 32A DP MCB- 1 nos4. Digital Volt meter & Ameter three phase5. All accesories & Connection (Rating & Danger borad) |
| 142 | Provision of Armoured cable size 3 1/2 x 35sqmm (25) |
| 143 | S/F of portico lamp. |
| 144 | Supplying all materials, labour, T&P and providing and fixing to wall or ceiling and floor PVC pipes conforming to ASTM-D-1785/89 of the following nominal bore, tube fittings and clamps including making the wall good. ceiling and floor, testing all complete as per specification and direction of the Engineer in charge. |
| 145 | 20mm dia PVC ASTM Pipe (Sch-80) |
| 146 | Ground Floor |
| 147 | 25mm dia PVCASTMPipe (Sch-80) |
| 148 | Ground Floor (Water Supply) |
| 149 | 32mm dia PVCASTMPipe (Sch-80)(Top Floor) |
| 150 | Supplying all materials, labour T&P and fitting and fixing brass/CP fittings of the following nominal bore with supply of all joiniting materialsincluding cost & conveyance of all materials to worksite, payment oftaxes etc. allcomplete as per P.H specification and direction of the Engineer-in-charge. |
| 151 | 15mm dia CP angle stop cock (Jaquar)CON-CHR-059KN |
| 152 | 15mm dia CPtwo way bib cock (Jaquar)CON-041KN |
| 153 | 15mm dia CP Bib cock (Jaquar Make) |
| 154 | 15mm dia CP long body bib cock (Jaquar Make) |
| 155 | 25mm dia brassfull way valve (Shakti make) |
| 156 | 32mm dia brassfull way valve (Shakti make) |
| 157 | 25mm dia CP Health Faucet (Jaquar Make) |
| 158 | 15mm CP Extension piece |
| 159 | 125mm CP grating |
| 160 | 15mm size C.P. flange |
| 161 | supplying all materials, labour, T&P and cutting holes through existing brick work including making good the damages in cement mortar (1:4) for taking G.I. Pipes and fittings/ P.V.C. pipes and fittings including watering, curing, cost & conveyance of all materials to worksite,payment of royality, taxes etc. all complete as perdirection ofEngineer-in-charge. |
| 162 | Ground Floor |
| 163 | Supplying all materials , labour, T&P and cutting holes in RCC floors and roofs upto 19cm thick for passing P.V.C pipes and G.I fittings etc. , and repairing the holes after insertion of pipe etc. with cement concrete (1:2:4) including finishing complete so as to make it leak-proofas per P.H. specification and direction of Engineer-in-charge |
| 164 | Ground Floor |
| 165 | Supplying all materials, labour, T&P and cutting grooves in pucca floors and walls for taking G.I./P.V.C. pipes and making good the damagesincluding watering ,curing , cost & conveyance of all materials to worksite, payment of royality, taxes etc all complete as per direction of the Engineer-in-charge. |
| 166 | Ground Floor |
| 167 | Supplying all materials, labour, T&P and fitting and fixing U-PVC SWR soil waste ventilating pipes and fittings of the following outside diameter conforming to ISI No 13592/1992 to walls with nails, bobbins and wooden plugs or laying in trenches including jointing with supply of approved rubber lubricant by non-heat application method/as per manufacturer\"s specification, testing, earthwork in excavation in all kinds of soil and refilling of trenches , cost & conveyance of all materials to worksite, payment oftaxes etc.all complete as per P.H specification and direction of the Engineer-in-charge. |
| 168 | 110mm U-PVC SWR Pipe (Ori Plast/Finolex/Supreme Make Type-B) |
| 169 | 75mm U-PVC SWR Pipe (Ori Plast/Finolex/Supreme Make Type-B) |
| 170 | 110mm U-PVC \" P \" Trap(Ori Plast/Finolex/Supreme Make) |
| 171 | 110mm U-PVC door bend(Ori Plast/Finolex/Supreme Make) |
| 172 | 110mm U-PVC Plain bend(Ori Plast/Finolex/Supreme Make) |
| 173 | 110mm U-PVC Cowl(Ori Plast/Finolex/Supreme Make) |
| 174 | 110mm U-PVC Plain tee(Ori Plast/Finolex/Supreme Make) |
| 175 | 110mm U-PVC Door tee(Ori Plast/Finolex/Supreme Make) |
| 176 | 110mm U-PVC Socket(Ori Plast/Finolex/Supreme Make) |
| 177 | 580mm size Orissa pan (Hindware/Parryware/Neycer make) |
| 178 | Supplying all materials, labour, T&P and fixing the following vitreous china Wash Down Water Closet(European type W.C. pan)with integral \"p\" or \"s\" trap to the floor with wooden plug and chromium plated pedestal screws including jointing the trap with soil pipe in cement mortar (1:1) fixing plastic seat and cover for wash down water closet with chromium plated brass hinges and rubber buffers including polishing , cost & conveyance of all materials to worksite, payment of royality, taxes etc. all complete as per P.H specification and direction of the Engineer-in-charge |
| 179 | European water closet with \"s\" trap plain(Hindware/Parryware/Neycer make) |
| 180 | Supplying all materials, labour T&P and and fixing 12.50 liters/10 liters capacity low level flushing cistern with a pair of cast iron or M.S. brackets complete with fittings such as siphonic arrangements 15mm nominal size brass/pvc ball valve with polythene float CP brass handle,unions and couplings for connection with inlet, outlet and overflow pipes, 32mm dia CP long flush bend, 15mm dia pvc inlet connection pipe including cutting holes and making good the same and connecting the flush bend with cistern and closet and connceting the inlet pipe with suupply main , cost & conveyance of all materials to worksite, payment oftaxes etc. all complete as perP.H specification and direction of the Engineer-in-charge |
| 181 | 10 ltr. Capacity pvc L.L. cistern with 32mm. Dia CP long flush bend ( Slimline-white-Parryware make ) |
| 182 | Supplying all materials, labour T&P and fixing wash basins with hole for pillar taps with cast iron or M.S.brackets painted white including cutting holes in walls and making good the damages with supply of wooden plugs, screws and cement etc, fixing pedestal for wash basin recessed at the back for the reception of pipes and fittings, fixing PVC waste pipe of 32mm nominal diameter for wash basin including brass check nut complete, fixing pillar taps capstan head screw down high pressure lettered \"Hot\" and \"Cold\" with long screws, shanks and back nuts of 15mm dia nominal bore, fixing 15mm dia PVC inlet connection pipe and making connection with pillar cocks and supply mains for wash basin, fixing 32mm dia CP brass waste, cost & conveyance of all materials to worksite, payment oftaxes etc. all complete as perP.H specification and direction of the Engineer-in-charge |
| 183 | 550mmx400mm W.H.basin (Hindware/Parryware/Neycer make)with 15mm dia C.P.pillar cock (Plaza make) with Pedestal including2 nos. lab sink |
| 184 | Supplying all materials, labour, T&P and fixing standard sized CP towel rail complete with CP brass brackets fixed to wooden plugs with CP screws as per specification and direction of the Engineer in charge |
| 185 | 25mmx600mm long CP towel rail |
| 186 | Towel ring |
| 187 | Supplying all materials, labour, T&P and fixing CP soap holder complete with CP brass brackets fixed to wooden plugs with CP screws as per specification and direction of the Engineer in charge |
| 188 | CP soap holder |
| 189 | Supplying all materials, labour, T&P and fixing standard sized glass-shelf with CP brass brackets and guard rail complete fixed to wooden plugs with CP screws as per specification and direction of Engineer in charge. |
| 190 | 600mmx125mm plate glass shelf with CP/NP guard rails. |
| 191 | Supplying all materials, labour, T&P and fixing mirror of superior glass mounted on 6mm.thick A.C. sheet or ply wood sheet and fixed to wooden plugs with CP screws and washers complete as per specification and direction of Engineer in charge. |
| 192 | 600mmx450mm size B.E mirror (swivelled type) |
| 193 | Supplying all materials , labour, T&P and cutting holes through existing brickor laterite masonry wall for takingU-PVC pipes and fittings including making good the damages etc. all complete as per P.H. specification and direction of Engineer-in-charge |
| 194 | Supplying all materials, labour, T&P and cutting of R.C.C roof or cornice for taking H.C.I pipes and making good the damages etc all complete as per P.H.Specification and direction of the Engineer in charge. |
| 195 | Cost of Alluminium Door |
| 196 | Construction of 01 No production wells including scientific source finding through consolidated and unconsolidated rock with down the hammer(DTH) drilling rig or combination rig with PVC pipe and installation of submersible pump set with all accessories |
| 197 | Labour for drilling a perfectly vertical bore hole of specified dia for a specified depth below ground level through consolidated and unconsolidated rock with down the hole hammer drilling rig or combination rig as required to suit the site condition as per the direction of the Engineer in charge including use of own rig with its accessories, tools and plant and consumables etc for lowering of 200mm/150mm dia G.I/P.V.C/M.S casing pipes for housing fitted with socket and with or without well screen as per the necessity for soft, medium, hard and boulder formation (G.I/ P.V.C/ M.S casing pipes if required to prevent collapse of overburden is to be provided by the contractor including lowering and withdrawing after completion of the tube well), 200mm dia to 400mm dia in overburden portion including packing of gravel supplied by the contractor for 400mm dia bore only |
| 198 | Drilling of 200mm dia bore |
| 199 | 00 mtr to 30mtr 30mtr |
| 200 | 31 mtr to 45mtr 15mtr |
| 201 | Drilling of 150mm dia bore |
| 202 | 46 mtr to 145 mtr,130m |
| 203 | Lowering the following size of G.I/P.V.C/M.S housing pipes with or without slotted pipes as per the necessity from ground level up to 45.00m depth and fitted and fixed up in perfectly vertical position including cutting and threading of pipes and slotted pipes and supplying and fixing all jointing materials, tools and plant etc all complete and keeping the top of casing pipe threaded including plugging tube wells to prevent entry of foreign materials. |
| 204 | Lowering of 200mm dia P.V.C casing pipes |
| 205 | 00 mtr to 45 mtrs |
| 206 | Supplying polyvinyl chloride pipes as per ASTM-D-1785-89 having threads in accordance with DIN 2999 part-1/DIN-42225 part-II specification length of pipe (laying length) will be 3 mtrs. The pipes shall be supplied with both external and threaded with free socket. The pipe having external thread at one end i.e female and or belled end. The female end having internal thread is to be belled in order to accept the male end while jointing pipes with a bore threading shall be provided with a greave at the roof of the male thread accomodate flexible PVC/Rubber \"O\" ring to make the joint water tight colour of the pipe shall be blue. The name of the manufacture along with batch No class of pipe shall be stranded legibly of each pipe length. |
| 207 | 200mm dia PVC (sch-80),30mtr |
| 208 | Supplying all materials, labour, T&P and providing and providing sanitary sealing by cement concrete grouting of annular space around GI/PVC/MS housing pipe upto 5m below ground level (as per drawing) to plug the bore hole excluding cost of cement all complete as per direction of the Engineer in charge. Minimum one metre of casing pipe to be inserted in the bore into the rock at the bottom to ensure sanitary sealing (excluding cost of cement which will be supplied directly by the department) |
| 209 | Supplying all materials, equipment, labour & conducting reconnaissance survey, integrated Hydrological and Geophysical (Electrical Resistivity Method) survey & selection of potential source for exploration of Ground Water including selection and recommendation of site for drilling wells in selected locations in any part of Orissa under the following Geological formation: |
| 210 | Rocky terrain with boulder formation for 300m depth |
| 211 | Supplying all materials, labour, T&P and providing, fitting and fixing submersible pump with squirrel cage induction type submersible type submersible electric motor to run on 3 phase/1 phase line voltage ranging from 320 volt to 450 volt conforming to IS: 8034/89 with following specifications with suitable control panel, jointing with GI/PVC/HDPE pipes, electrification, testing, commissioning, trial running, conveyance of all materials to worksite, payment of taxes etc all complete as per specification and direction of the Engineer in charge (Texmo/Crompton Greaves/Kirloskar make) |
| 212 | 2 H.P. Single phase/ three phase 3 stagehead range of 20 to 35 mtr with discharge capasity 145 to 110 L.P.M With outlet dia 25 mm |
| 213 | DOL Control panel |
| 214 | 40mm dia steel short piece |
| 215 | Well cap |
| 216 | 50mm size CI bracket |
| 217 | 2.50sqmm flat cable |
| 218 | 20mm dia rigid UPVC pipes |
| 219 | Steel rope with cover |
| 220 | Labour charges for lowering including transportation |
| 221 | Supplying allmaterials, labour, T&P and providing and fixing to wall or ceiling and floor IS marked galvanised mild steel tubes (medium grade) confirming to IS: 1239/1990, part-1 of the following nominal bore, tube fittings and clamps including making good the wall , ceiling and floor, testing, cost & conveyance of all materials to worksite, payment of all taxes etc all complete as per P.H specification and direction of the Engineer-in-charge. |
| 222 | 32mm dia HDPE Pipes (Finolex/ Suprememake) |
AI Tender Summary
Tender Timeline
Mar 14, 2023
11:30 IST
Tender Published
Tender notice published.
CompletedMar 28, 2023
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedMar 29, 2023
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender