Name of Work: enuiqjk /kuqvk ls uxyk rky ok;k lMd rd ekxZ ij lkekU; ejEer ds lkFk uohuhdj.k dk dk;Z A
Sl. No.
Item Description
1
Earthwork in cutting or in embankment in ordinary soil, excavation to be in the from of regular pits not exceeding ½ metre (20\") in depth & earthwork in embankment to be in 20 cm (8\") layers, including ramming & dressing the surface to required levels and slopes and also including 1.5 metre (5ft) lifts and 30 m (100\") lead. The earth from cutting to be used in making embankment or to be deposited as spoil banks with 30 metres (100 ft) distance as directed by the Engineer-in-charge. As per SOR item 253
2
WBM Grade-3Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smoothwheel roller 80-100 kN in stages to proper grade and camber, applying and brooming, stone screening to fill-up the interstices of coarse aggregate, watering and compacting to the required density Grading 3 as per Technical Specification Clause 405.
3
Tack CoatProviding and applying tack coat with VG-10 using emulsion distributor at the rate of 0.30 kg per sqm on the prepared dry and hungry bituminous surface cleaned with Hydraulic broom as per Technical Specification Clause 503.
4
PC 20 MMProviding, laying and rolling of open-graded premix carpet of 20 mm thickness composed of 13.2 mm to 5.6 mm aggregates either using penetration grade bitumen or emulsion to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a three wheel 80-100 kN static roller capacity, finished to required level and grades as per Technical Specification Clause 508.
5
Seal CoatProviding and laying seal coat sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall using Type C as per Technical Specification Clause 510.
We takes all possible care for accurate & authentic tender information, however Users
are requested to refer Original source of Tender Notice / Tender Document published by
Tender Issuing Agency before taking any call regarding this tender.
