Tender For Construction Of Environment Controlled Scion Wood/ Seed/ Bulb Storage Unit At Kvk Kandaghat, Distt. Solan (Sh- Civil Work)
Tender Value
8.41 Lakhs
Estimated cost
Bid Submission
21 Mar 2023
0 days left
EMD
17000
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
kandaghat → Himachal Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Construction Of Environment Controlled Scion Wood / Seed / Bulb Storage Unit At Kvk Kandaghat, Distt. Solan ( Sh- Civil Work )
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means over areas on all depths and widths including getting out and disposal of all excavated earth in all leads, lifts and carriage of material as directed by the Engineer-in-Charge. a). Ordinary rock. |
| 2 | Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete in all respect as per satisfaction of Engineer-in-Charge. |
| 3 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level complete in all respect as per satisfaction of Engineer-in-Charge. a) 1:5:10(one Cement : five sand : ten graded stone aggregate 40 mm (twenty milimetre) nominal size |
| 4 | Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand (zone - III) : 6 graded stone aggregate 20 mm nominal size) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessaryexcavation, levelling & dressing & finishing the top smooth. |
| 5 | Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement work up to plinth level with 1.1.5:3 (one cement : one and half sand : three stone aggregate 20 mm (Twenty milimetre) nominal size) in foundation and plinth etc.Complete in all respect as per satisfaction of Engineer-in-charge. |
| 6 | Reinforced cement concrete workinwalls(any thickness), including attached pilasters, buttresses, plinth andstring courses, fillets, columns, pillars, piers, abutments, posts andstruts etc.above plinth level up toall floor level with 1.1.5:3 (one cement : one and half sand : three stone aggregate 20 mm (Twenty milimetre) nominal size) in foundation and plinth etc.complete in all respect as per satisfaction of Engineer-in-charge. |
| 7 | Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases andspiral stair cases above plinth level up to floor five level, excluding thecost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (one cement : one & half coarse sand : three graded stone aggregate 20 mm(twenty milimetre) nominal size) etc. complete in all respect as per satisfaction of Engineer-in-Charge. |
| 8 | Centering and shuttering including strutting, propping etc. and removal of form for etc. complete in all respect as per satisfaction of Engineer-in-charge. |
| 9 | a)Foundations, footings, bases of columns, etc. for mass concrete |
| 10 | b)Lintels, beams, plinth beams, girders, bressumers and cantilevers |
| 11 | c)Columns, Pillars, Piers, Abutments, Posts and Struts |
| 12 | d)Suspended floors, roofs, landings, balconies and access platform |
| 13 | e)Stairs,(excluding landings) except spiral-staircases |
| 14 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level etc. complete in all respect as per satisfaction of Engineer-in-Charge. a) Cold twisted bars. |
| 15 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to all floor level with cement mortar 1:6 (one cement : Six sand) etc. complete in all respect as per satisfaction of Engineer-in-charge. |
| 16 | Half brick masonry with common burntclay F.P.S. (non modular)bricksofclassdesignation7.5 in superstructure above plinth level up to all floor level with cement mortar 1:4 (one cement : four sand) etc. complete in all respect as per satisfaction of Engineer-in-charge. |
| 17 | Brick edging 7 cm wide 11.4 cm deep to plinth protection with common burntclay F.P.S. (nonmodular) bricks of classdesignation7.5 includinggroutingwithcement mortar1:4 (one cement : four sand) complete in all respect as per satisfaction of Engineer-in-Charge. |
| 18 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length etc. complete in all respect as per satisfaction of Engineer-in-Charge. (hold fast lugs or dash fastener shall be paid for separately). a).Sal wood |
| 19 | Providing and fixing 35 mm thick Second class teak wood glaged shutters for doors, windows and clerestory windows using 4 mm thick float glass panes,including ISI marked MS pressed butt hinges bright finished of required size with necessary screws etc.complete in all respect as per satisfaction of Engineer-in-charge. |
| 20 | Providing and fixing 30 mm thick Second class teak wood wire gauge shutters using galvanized M.S. wire gauge of average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm, for doors, windows and clerestory windows with MS butt hinges and necessary screws: etc.complete in all respect as per satisfaction of Engineer-in-charge. |
| 21 | Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick: a).4 mm thick glass pane (weight not less than 10 kg per sqm). |
| 22 | Providing and fixing 2nd class teak wood 40mm into 12 mm wooden Chamfered moulded beading to door and window frames with iron screws, plugs and priming coat on unexposed surface etc. complete in all respect as per satisfaction of Engineer-in-charge. |
| 23 | Providing and fixing ISI marked flush door shutters conforming to IS : 2202(PartI) non decorative type,coreof blockboard constructionwithframeof1st classhard wood andwell matched teak3 ply veneering with vertical grains or cross bands andface veneers on both faces of shutters etc. complete in all respect as per satisfaction of Engineer-in-Charge.a). 35mmthickincludingISI marked Stainless Steel butt hinges with necessary screws |
| 24 | Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer etc. complete in all respect as per satisfaction of Engineer-in-Charge. a). Fixed to openings /wooden frames with rawl plugs screws etc. |
| 25 | Providing and fixing ISI marked oxidised / chromium plated M.S. sliding door bolts with nuts and screws etc. complete :etc. complete in all respect as per satisfaction of Engineer-in-Charge a). 300x16 mm (three hundred into sixteen milimetre) |
| 26 | Providing and fixing ISI marked oxidized/Cromium plated M.S. towerbolt blackfinish,(Barreltype)withnecessaryscrews etc. complete in all respect as per satisfaction of Engineer-in-Charge |
| 27 | a). 200x10mm (Two hundred into ten milimetre) |
| 28 | b). 150x10mm (One hundred fifty into ten milimetre) |
| 29 | Providing and fixing ISI marked oxidized/ Cromium plated M.S.handles conforming to IS:4992 with necessary screwsetc. complete in all respect as per satisfaction of Engineer-in-Charge. |
| 30 | a)125mm(One hundred twenty five milimetre) |
| 31 | b)100mm(one hundred milimetre) |
| 32 | Providing and fixing ISI marked oxidized/ chromium plated M.S. single acting spring hinges with necessary screws etc. complete in all respect as per satisfaction of Engineer-in-Charge.a)150 mm ( one hundred fifty milimetre) |
| 33 | Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screwsetc. complete in all respect as per satisfaction of Engineer-in-charge. a)Twin rubber stopper |
| 34 | 40 mm (forty milimetre) thick Cement concrete flooring 1:2:4 (one cement : two coarse sand : four graded stone aggregate 20mm (twenty milimetre)nominal size finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete in all respect as per satisfaction of Engineer-in-Charge. |
| 35 | 18mm (eighteen milimetre) thick Cement plaster skirting up to all height, with cement mortar 1:3 (one cement: three sand), finished with a floating coat of neat cement etc. as required. Complete in all respect as per satisfaction of Engineer-in-Charge. |
| 36 | Providing and fixing glass strips in joints of terrazo/ cement concrete floors etc. complete in all respect as per satisfaction of Engineer-in-charge.40 mm wide and 4 mm thick |
| 37 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, (Kazaria/ Nitco/ Orient bell make), in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc. complete complete in all respect as per satisfaction of Engineer-in-Charge.a). Size of tile 600x600mm |
| 38 | 15 mm (fifteen milimetre thick) cement plaster on rough side of single or half brick wall of mix with cement mortar 1:6 (one cement: six sand) complete in all respect as per satisfaction of Engineer-in-Charge. |
| 39 | 6 mm (six milimetre) thick ceiling plaster with cement mortar1:3 (one Cement : three sand) complete in all respect as per satisfaction of Engineer-in-Charge. |
| 40 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete etc. in all respect as per satisfaction of Engineer-in-Charge. |
| 41 | Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade etc. all complete as specified and as directed by the Engineer-in-Charge. a)Two or more coats on new work |
| 42 | Finishing walls with water proofing cementpaint of required shade etc complete in all respect as per satisfaction of Engineer-in-Charge. a). Newwork(Twoormore coats applied@ 3.84 kg/10 sqm) |
| 43 | White washing with lime to give an even shade etc complete in all respect as per satisfaction of Engineer-in-Charge. a). New work (threeor more coats) |
| 44 | Applying priming coat with ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood) complete etc. in all respect as per satisfaction of Engineer-in-Charge. |
| 45 | Painting with synthetic enamel paint on new wood/steel of approved brand and manufacture to give an even shade as required complete in all respect as per satisfaction of Engineer-in-Charge. a) Two or more coats on new work. |
| 46 | Providing and fixing Cromium plated MS . Hooks and eyes etc. complete in all respect as per satisfaction of Engineer-in-charge. a) 150mm (One hundred fifty milimetre) |
AI Tender Summary
Tender Timeline
Mar 13, 2023
11:30 IST
Tender Published
Tender notice published.
CompletedMar 21, 2023
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedMar 21, 2023
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender