Paschimanchal Vidyut Vitran Nigam Limited has published Releasing Connection To M / S. Arya Agro India Products C / O Shri Pranav Arya In Area Of Edd-I Hapur. Submission Date for this Tender is 15-03-2023. Electrification Work Tenders in hapur Uttar Pradesh. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | FORRELEASING 600KVA CONNECTION TO M/S. ARYA AGRO INDIA PRODUCTSC/O SHRI. PRANAV ARYA, IN DEPOSIT SCHEME, IN THE JURISDICTION OF EDD-I HAPUR, UNDER EDC., HAPUR. (All work will be completed as per sanctioned estimate). |
| 2 | Carriage of line material (like Jointing Kit, clamps, nuts, bolts, channel, M.S. angle, ACSR Conductor etc.) from Electricity Store Center, Hapur to site of work with loading and unloading at both ends on Kachha Packka road. |
| 3 | Carriage of ST Pole 11 mtrs. Long from Electricity store center, Hapur/J.E. Store to site of work with loading and unloading at both ends on Kachha Packka road. |
| 4 | Carriage of 11KV XLPE Cable 3x120sqmm, from Electricity store center, Hapur to site of work with loading and unloading at both ends on Kachha Packka road. |
| 5 | Carriage of 11KV CT/PT Unit from Electricity store center, Hapur to site of work with loading and unloading at both ends on Kachha Packka road. |
| 6 | Carriage of 11KV VCB from Electricity store center, Hapur to site of work with loading and unloading at both ends on Kachha Packka road. |
| 7 | Carriage of Metering Cubical Set Complete, from Electricity store center, Hapur to site of work with loading and unloading at both ends on Kachha Packka road. |
| 8 | Erection & Fixing of STP Pole 11 mtr. longin 11 KV line after digging of suitable pits including fixing of requisite accessories as per RESPO Drawing/Norms by providing F-Bracket made of M.S. Flat of size 50x6 mm, Cross Arm holding Clamps made of M.S. Flat of size 50x6 mm with proper size nuts and bolts. |
| 9 | Fabrication, erection and fixing of double pole on ST Pole 11 mtr. long with fixing of M.S. Top & Dropper Channel, M.S. S/S Angle, E-Bracket, 11 KV Pin insulator with Pin,Disc Insulator with Disc fitting as per RESPO Drawing/Norms by providing topand dropper clamps made of M.S. Flat of size 50x6 mm with proper size nuts and bolts. |
| 10 | Mounting, Placing and connecting from LT/HT side of 11KV, CT/PT Units as per RESPO Norms. |
| 11 | Making and filling of 11KV Cable Jointing Kit 3x120Sqmm, after duly plumbing and taping of suitable XLPE Cable, providing, fixing and crimping of proper size good quality lugs, including cost of lugs and tape etc., as per RESPO Norms. |
| 12 | Installation and erection of 11KV Metering Cubical Complete work as per RESPO Norms. |
| 13 | Installation and erection of 11KV VCB Complete work as per RESPO Norms. |
| 14 | Grouting & fixing of stay rods (20x1800)mm including all work of excavation, cement concrete in size (0.60x0.60x0.30)m in ratio 1:4:8 cement, sand, 40mm brick ballast as per drg. Including back filling, proper ramming etc and fixing tightening & nozzling of stay wire with stay rod with the poles of required tension as per drawing as per RESPO Drawing/Norms by providing all grouting material and stay clamp made of M.S. Flat of size 50x6mm with proper size bolts & nuts & loops. |
| 15 | Earthing of supports with MS earth Rod of (20x2500)mm long including excavation of pit and driving M.S. Rod 3.0 M apart from support and 0.5m below the ground level and connection below the earth electrodes with the help of G.I. wire & earthing lugs as per RESPO Drawing/Norms by providing proper size nuts & bolts. |
| 16 | Grouting of ST supports in CC 1:4:8 (Cement, sand & 40mm brick ballast) Grouting will be done in the block of size (450x450)mm x1/6th of full length of the support, up to ground level, 300mm plinth above the ground level with CC 1:3:6 (Cement, core sand and Stone grit) with mufting as per drawing, work includes back filling & proper ramming by providing all required grouting materials. |
| 17 | Laying , Stringing and final sagging of ACSR Weasel Conductor after binding from Insulator, as per RESPO/Drawing Norms. |
| 18 | Providing & Fixing of G.I. pipe 6"dia Class-B over 11KV 3X70 and 3x120Sq.mm XLPE cable before mounting the cable at double pole. The work includes fitting of clamps, sealing of top and bottom of pipe and one end of pipe is to be burried under earth about 500mm earch including mounting and clamping the cable on double pole structure and making connection with overhead line at both ends. |
| 19 | Laying of 140mm O/D PN-4PE-80 grade UV stabilized HDPE pipe as per IS 4980 of 6meter, for laying of underground 11KV XLPE Cable as per RESPO/Norms, including cost of above HDPE pipe. |
| 20 | Laying of 11KV XLPE Cable 3x120Sqmm undergound (Double Circuit, 480x2=960mtrs.) into HDPE Pipe, spare cable shall be left in the loop shape at both ends as per RESPO/Norms. |
| 21 | Laying of 11KV XLPE Cable 3x120Sqmm., for every Double pole and work site required, completion of work properly as per RESPO/Norms. |
| 22 | Erection & Fixing of Marking Stone and completion of proper work as per RESPO/Norms, including cost of Marking stone. |
| 23 | Road restoration charge for pucka road crossing as per RESPO/Drawing Norms. |
| 24 | Road restoration charge for foothpath side as per RESPO/Drawing Norms. |
| 25 | Dismantling & Removal of old & used CT/PT Unit and opening of all accessories. |
| 26 | Carriage of old & used CT/PT Unit from site of work to Electricity store center, Hapur with loading and unloading at both ends on Kachha Packka road. |
| 27 | Erection & fixing of Chemical earthing as per RESPO Norms and proper completion work complete (according to sanctioned estimate concerned). |
| 28 | Jumpering work properly as per RESPO/Norms. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
