Tender For Rejuvenation Of Primary Health Center Nagla Baroula Under Nagar Panchayat Barauli
Tender Value
5.50 Lakhs
Estimated cost
Bid Submission
01 Apr 2023
0 days left
EMD
55036
Bank guarantee accepted
Document Fee
600
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
nagla → Uttar Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Rejuvenation Of Primary Health Center Nagla Baroula Under Nagar Panchayat Barauli
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling cement concrete or bricek or granolithic floors including base concrete stacking of Dismantled materials as directed by Engineer-In-charge within a distence of 60 meters (200 feet ). (CH-17,SI.697) |
| 2 | Excavation in foundation in ordinay soil ( Loam, clay or Sand ) Including lift upto 1.50 m and lead upto 30m and including filling watering and ramming of excavatedarth into the trenchses or into the spece between the building and the sides of foundationtrenchses or into the plinth and removal and disposal of surplus earth as directed by engineer incharach upto a distance of 30m from the foundationtrenchses by hydraulic excavator/ manual means, ch-4.S.I. 251 |
| 3 | providing and laying cement concrete in 1:6:12 ( 1 cement : 6 coarse sand : 12 graded stone aggregate 40 mm nominal size ) including supply of all material , labour and T&P etc. required for proper completion of the work. In foundation and floors(Ch-5 S.I. 273 a) |
| 4 | Brick work with common burnt clay F.P.S. ( Non modular ) bricks of clasess disignation- 100 in foundation and plinth in ( Cement mortar 1:6 ( 1 cement :4 coarse sand ) Ch-6 S.I. 1) |
| 5 | Providing and laying cement concrete in 1:2:4 (1 cement : coarse sand : 4 graded stone aggregate20 mm nominal size) including supply of all materile labour and T & P etc. required for proper complition of the work. All work upto plinth level( Ch-5 , S.I. 279 ) |
| 6 | 12 mm cement plaster 1:4 ( 1 Cement 4 Coarse Sand )( on Brick work with cement moter of mix( upto 10 mtr height From Ground level ) Ch-13 S.I.1 (584) |
| 7 | Distempering ( two coat ) with oil boud distemper of approved brand and manufacture and of requiredshade on undercoated wall surface to give an even shade over & including a priming coat with cement primer of approved brand and manufacture such as berger, j&n , shalimar, asian, paints after thoroughly brushing the surface free from mortar droppings and other foreing matter and also including preparing the surface even with plaster of approved synthetic material and send papered smooth including cost of all material , labour , T&P ect , complete required for proper completion of the work (ch-15, S.I. 649 + 650) |
| 8 | Providing and laying vitrified floor tiles in different sizes with water absorption less than 0.08 % and conforming to IS : 15622,of approved make, in all colours and shades , laid on 20mm thick cement mortar 1:4 ( 1 cement : 4 coarse sand ). Jointing with grey cement slurry @ 3.3 kg / sqm including grouting the joints with white cement and matching pigments ect, complete . 600 x 600 mm size tiles( ch- 14, SI. 16 A (ii)) |
| 9 | s/f (1/4\"\")thick china white glazed tiles on walls or dado laid with 1:3 cement and approved coars sandmotar finished with white cement jointed and polishing complete inclunding supply of all materials,labour required for proper completion of the work.(CH-14,SI,16A (ii)) |
| 10 | provinding and fixing angle/Tee iron frames for doors windows and ventilators of mild steel angle sections of size 35x35x5 mm or 35x5 mm flat places to the existing T-iron frame or to the well with dash fastener,including fixing of necessary butt hinges and screws and applying a priming cost of approved steel primer,all complete as per the direction of engineer-in-charge.(CH-10,SI,12) |
| 11 | supply and fixing flush doors,commercial quality conforming of I.S.2202 part-1 (1983) including fixing of wooden cleats and stoppers and including fixing and adjustmant of hinges bolts,locks,handles,springs fitting with nacessary scrawes to be supplied departmentally.30mm thick(CH-9,SI. 47A) |
| 12 | painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : two or more coats on new work over an under coat of suitable shade with wooden primer of approved brand and manufacture labour,T&P etc.complete required for proper completion of the work.(CH-15,SI.4) |
| 13 | add miscellanious etc. work |
| 14 | Add GST 18% |
| 15 | Sign Board |
AI Tender Summary
Tender Timeline
Mar 10, 2023
11:30 IST
Tender Published
Tender notice published.
CompletedApr 01, 2023
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedApr 03, 2023
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender