Maintenance And Repair To Damaged Of H.P Sluice P.S Sluice And Banshyamnagar Sluiceat Mouza -Dakshin Shibganj And Choto Banashyamnagar Facing Riverbarchara And Calchera River Under Patharpratima Irrigation Sub-Division Ofkakdwip Irrigation Division Within
Tender Value
8.61 Lakhs
Estimated cost
Bid Submission
27 Mar 2023
0 days left
EMD
17227
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
patharpratima → West Bengal
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Maintenance And Repair To Damaged Of H.P Sluice P.S Sluice And Banshyamnagar Sluiceat Mouza -Dakshin Shibganj And Choto Banashyamnagar Facing Riverbarchara And Calchera River Under Patharpratima Irrigation Sub-Division Ofkakdwip Irrigation Division Within Block Patharpratima , Dist- South Parganas
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in excavation of foundation trenches or drains, in all sorts of soil (including mixed soil but excluding laterite or sandstone) including removing, spreading or stacking the spoils within a lead of 75 m. as directed. The item includes necessary trimming the sides of trenches, levelling, dressing and ramming the bottom, bailing out water as required complete. (b) Depth of excavation for additional depth beyond 1,500 mm. and upto 3,000 mm. but not requiring shoring. |
| 2 | Earth work in filling in foundation trenches or plinth with good earth, in layers not exceeding 150 mm. including watering and ramming etc. layer by layer complete. (Payment to be made on the basis of measurement of finished quantity of work)(a) With earth obtained from excavation of foundation |
| 3 | Ordinary Cement concrete (mix 1:2:4) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement,if any, in ground floor as per relevant IS codes.a) Pakur Variety |
| 4 | Brick work with 1st class bricks in cement mortar (1:4) (b) In superstructure, ground floor |
| 5 | Brick soling with picked Jhama bricks including preparation of bed as necessary with the brick joints properly filled in and packed with local sand or powedred earth including necessary cushion of similar material below the soling and in between layers–a) Single brick Flat soling (7.5 Cm. thick). |
| 6 | Stripping off worn out plaster and raking out joints of walls, celings etc. upto any height and in any floor including removing rubbish within a lead of 75m as directed. |
| 7 | Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course,scaffolding/staging where necessary (Ground floor).[Excluding cost of chipping over concrete surface](ii) With 1:4 cement mortar(a) 20 mm thick plaster |
| 8 | Taking out flap shutter of sluice gate including hoising arrangements and refitting the same with new nuts and bolts where necessary.(a) Upto 4 Sqm.ii) Taking out only. |
| 9 | Supplying, fitting, fixing Mild Steel flap shutter with Mild Steel plate of thickness as specified by the Engineer-in-charge and other necessary Mild Steel sections for sluice including fabricating the same (as per drawing and instruction given by the Engineerin-charge) including painting with two coats of anticorrosive bituminous paint of approved make & brand over two coat of red lead primer and with necessary masonry work with all materials supply etc. completeatsite. |
| 10 | Taking out sluice gate draw shutter & gearingarrangements pedestal and refitting the same with new nuts and bolts where necessary.(a) Upto 4 Sqm.ii) Taking out only. |
| 11 | Supplying, fitting, fixing Mild Steel draw shutter with Mild Steel plate of thickness as specified by the Engineer-in-charge and other necessary Mild Steel sections for sluice including fabricating the same (as per drawing and instruction given by the Engineer-in-charge) excluding cost of Mild Steel guide channel, sill beam, gearing arrangement etc. but including painting with two coats of anti corrosive bituminous paint of approved make & brand over two coat of red lead primer and with necessary masonry work with all materials supply etc. complete at site. |
| 12 | Supplying / Replacing Gun Metal Bush for screw gearing arrangement required for hanging arrangement to draw shutter and fitting & fixing with the screw gearing arrangement for operating the draw shutter by taking out the old screw gearing arrangement and Gun Metal bush etc. complete as per direction of the Engineer-in-charge.(The old materials to be returned to DepartmentalGodown.)(a) 50 mm. dia |
| 13 | Supplying, fitting & fixing Cast Iron wheel (after taking out existing one if necessary), rim made of 28 mm. to 36 mm. dia to fit any size of gear rod including carriage to site, painting with two coats of bituminous paint over two coats of red lead primer etc. completeas per direction of the Engineer-in-charge.(a) 45 cmdia. Cast Ironwheel. |
| 14 | Supplying / Replacing Gear rod by a new Mild Steel Gear rod, threaded length as required and fitting, fixing in position with screw gearing arrangement for operating the draw shutter including taking out old gear rod by cutting bolts etc. complete as per direction of the Engineer-in-charge. (The old materials to bereturned to Departmental Godown).a) 50 mm. dia. |
| 15 | Supplying / Replacing including fitting & fixing at site new Cast Iron guide channel true to the line & level for draw shutters of sluices as per drawing & direction of the Engineer-in-charge with Cast Iron hold fast not more than 1 Metre apart including two coats of anti-corrossive bituminous paint of approved make and brand over two coats of red lead primer. (Rate is inclusive of taking out of oldguide channels, if required) |
| 16 | Supplying,dressing and stacking at site bamboo pins above 5 cm. dia. and upto 7.5 cm. dia.(Dia to be measured at mid length). |
| 17 | Driving bamboo pins in standing or flowing water including scaffolding and driving appliances.(a) Where boats are not necessary |
| 18 | Supplying, fitting and fixing with iron nails half split bamboo wailing pieces (av.dia.of bamboo not less than 5.0 cm.) |
| 19 | Supplying to site empty cement polythene bags (capacity 50kg) in good condition including stacking, incedental charges etc. all complete (capacity 50 kg). |
| 20 | Labour charges for filling empty cement gunny bag / polythene bag (capacity 50 kg) with all kinds of earth (wet or dry), sand or agreegates(stone / brick) and sewing as done in case of cement bags ,( tying with a knot after filling willnot beaccepted ) , andstacking withina lead of 30 metre as per direction of Engr-in-charge (cost is excluding the cost of any types of filling materials).NB:- Volume of earth/ sand filled bags should not be less than 0.028 cum/ bag. |
| 21 | Dumping in position earth / sand filled gunny / poly bags (capacity 50 kg) within a lead of 30 metre inclusive of all lifts. |
| 22 | Earthwork from borrow pits over existing embankment or for repairs to embankment, closing breaches etc. within an initial lead of 30 metre and lift of 1.50 metre including breaking clods and depositing the same in layers not exceeding 25 cm. and rough dressing etc. complete as per profile. |
| 23 | Extra rate over Item No 21 for all kinds of soil for every additional lead of 30 metres or part thereof beyond the initial lead of 30 metresi) From 60 m to 90m. |
| 24 | Extra rate over Item No21 for all kinds of soil for every additional lift of 1.50 metre or part thereof beyond the initial lift of 1.50 metre. |
AI Tender Summary
Tender Timeline
Mar 11, 2023
11:30 IST
Tender Published
Tender notice published.
CompletedMar 27, 2023
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedMar 28, 2023
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender