Tender For Annual Surfacing On Simloh Mandhorghat Dargi Via Nagar Km. 0/00 To 2/825 (Sh:- Providing And Laying 30 Mm Thick Bituminous Concrete Along With Providing & Laying Of Hot Applied Thermoplastic Compound 2.50 Mm Thick For Edge Line In Between Km. 0
Tender Value
49.37 Lakhs
Estimated cost
Bid Submission
18 Mar 2023
0 days left
EMD
98800
Bank guarantee accepted
Document Fee
2000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
dhami → Himachal Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Annual Surfacing On Simloh Mandhorghat Dargi Via Nagar Km. 0 / 00 To 2 / 825 ( Sh:- Providing And Laying 30 Mm Thick Bituminous Concrete Along With Providing & Laying Of Hot Applied Thermoplastic Compound 2.50 Mm Thick For Edge Line In Between Km. 0 / 00 To 2 / 825 ) Under Amp Villag Road For Fy 2023-24
BOQ
| Sl. No. | Item Description |
| 1 | Providing and applying tack coat with Bitumen emulsion (RS-I) using emulsion distributor at the rate of 0.25 to 0.30 kg, per sqm. On the prepared bitumenous surface cleaned with Hydarulic broom as per TechnicalSpecification Clause 503. including entire carriage of materials upto all leads and lifts and as per thedirection of Engineer in Charge. |
| 2 | Providing and laying Bitumen Penetration Macadam with hard stone aggregate of quality, size and grading as specified, with bitumen of suitable penetration grade, including required key aggregate as specified, spreading coarse aggregate with the help of self propelled/ tipper tail mounted aggregate spreader and applying bitumen by a pressure distributor and then spreading key aggregate with the help of aggregate spreader complete, including consolidation with road roller of minimum 8 to 10 tonne capacity to achieve specified values of compaction and surface accuracy : For 50 mm compacted thickness using coarse aggregate of size 50-20 mm graded @ 0.60 cum per 10 sqm key aggregate of size 12.5 mm graded @ 0.15 cum per 10 sqm. With paving asphalt grade VG - 10 @ 50 kg/ 10 sqm. including carriage of material upto all leads and lifts as per the direction of Engineer-in-Charge. |
| 3 | Providing and laying bituminous concrete 30 mm (thirtymilimetre ) thick with 100-120 (one hunderd -one hundred twenty ) TPH batch type hot mix plant producing an average output of 75 ( seventy five ) tonnes per hour using crushed aggregates of specified grading, premixed with bituminous binder @ 5.4 to 5.6 ( five point four to five point six )per centof mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MORTH specification clause No. 509 (five hundred nine )complete in all respects |
| 4 | Providing and Laying of Hot applied Thermoplastic compound 2.50 mm thick including relectorising glass beads @ 250 grams per square metre area. Thick ness of 2.50 mm is exclusive of surface applied glass beads as per IRC: 35. The finished surface to be level uniform and free from streaks and holes including entire carriage of materials upto all leads and lifts through all modes of transportation as per the direction of Engineer in Charge. |
AI Tender Summary
Tender Timeline
Mar 09, 2023
11:30 IST
Tender Published
Tender notice published.
CompletedMar 18, 2023
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedMar 20, 2023
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender