|
| 1 | Providing and installation of Centrifugal pump of 60-LPS, 22 mtr. head with 25 HP motor (SI: 6595) (Make: Kirloskar, Mather & Platt, Jyoti) including carring loading, un-loading etc. at the site of work including trial run for 10 hrs. in two spells as per direction of the Engineer-in-Charge. |
| 2 | Dismentaling of old pump/motor from base & stacking of materials & return the same to Sub-Divisional store as per direction of the Engineerin- Charge. |
| 3 | Demolishing cement concrete manually / by mechanical means including disposal of material with all lifts and upto 50 m lead etc. complete as per direction of the Engineer- in-charge:-i) Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix) |
| 4 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.-All kinds of soil |
| 5 | Supplying and filling in plinth, under floor, foundations etc. with sand (fine) from local quarry with all lifts including spreading in horizontal layers, watering, grading to required slope, ramming, consolidating and compacting each layer by using plate compactor or by any suitable method complete. |
| 6 | Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering --All work upto plinth level:1:2:4 ( 1 Cement: 2 fine sand : 4 graded well burnt brick aggregate 20 mm nominal size) |
| 7 | Providing and fixing MS bolts including nuts and washers complete as per standard design:i) Above 300 mm length |
| 8 | Welding by gas or electric plant including transportion of plant at site etc. complete as per standard design. |
| 9 | Providing structural steel work in single section fixed with or without connecting plate including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete as required. |
| 10 | Providing and fixing G.I. pipes of Heavy class as per IS : 1239 with latest amendment complete with G.I. fittings including trenching and refilling, cutting and making good the walls etc. complete as per CPWD specification and direction of the Engineer - in - charge.A) 150 mm. dia. (External works) |
| 11 | Dismentaling of G.I bend including necessary earth cutting etc. & return the same to Sub-Divisional store as per direction of the Engineerin-Charge.A)125/150 mm ? |
| 12 | Supplying & fitting fixing of GI . bend of approved quality.A) 150 mm. dia. |
| 13 | Providing & fitting fixing PVC suction hose pipe overall thickness 5mm of best quality at site of work (Pankaj made) of approved quality.A) 150 mm. dia. |
| 14 | Providing & fitting fixing MS hose clamp with nuts & bolts etc. complete at site of work of approved quality.A) 150 mm. dia. |
| 15 | Providing & fitting fixing M.S flange (10mm thick) at site of work of approved quality.A) 150 mm dia. |
| 16 | Providing & fitting fixing Rubber flange washer 6 mm thick at site of work of approved quality.A) 150 mm dia. |
| 17 | Providing & fitting fixing MS tail piece with MS flange suitable for pipes complete as per CPWD Specification & direction of Engineerin-charge.A) For 125 mm. dia PVC Pipe |
| 18 | Providing & fitting fixing C.I foot valve of heavy duty at site of work of approved quality.A) 150 mm. dia. |
| 19 | Dismentaling of G.I pipe including necessary earth cutting etc. & return the same to Sub-Divisional store as per direction of the Engineerin-Charge.A) 125/150 mm. dia. |
| 20 | Supplying & fitting fixing of 7/16 Copper Wire with all electrical equipments including trial run etc. complete (ISI Marked) on the pannel board of approved quality. |
| 21 | Providing and fitting fixing of Moulded Case Circuit Breaker (MCCB) of different Thermal release range , 415 + V, 50Hz (L & T, BCH, ABB make) as per specification and direction of the Engineer-in-charge.A) 50-63 Amps. |
