|
| 1 | Atal Chowk |
| 2 | Dismantling existing plaster including disposal of refuse as directed by Engineer-in-churge with in a distance of 60 meter (200 feet). Chapter No- 17 S.I. No 706 |
| 3 | 15 mm Cement plaster in 1:4 single coat on fair side of single or half brick wall for interior plustering upto floor two level including internal rounded angles chumfers, und/or rounded ungles not exceeding 80 mm. In girth and finished even and smooth. No extra for mixing any additive. Item No - 17.59 |
| 4 | Providing and applying fiber reinforced elastomeric liquid waterproofing membrance (Asian Paints Samart Care Damp Proof) resilient acrylic polymers having sun Reflectivity index (SRI) of 105 on top of concrete roof in three [email protected] litre@10 sqm. one coat of self- priming of elastomeric waterproofing liquid (duilution with water in the ration of 3:1) and two coats of undiluted elastomeric waterproofing liquid (dry film thickness complete application/ system not less than 500 microns). The operation shall be carried out after scapping and properly cleaning the surface to remove loose particles with wire brushes, complete in all respect as per the direction of Enginner - in - Charge |
| 5 | Providing & applying of wall putty 2 mm thick I/C all as per PWD SOR 2022 New ItemRef DAR 13.26 Page 63 |
| 6 | Finishing walls with water proofing cement paint of approved make and quality on new work with two coat to give to give an even shade. Including mo 607 supply of all material, labour and T&P etc. required for proper completion of the work. S.I. No 660 |
| 7 | Sand filling in plinth including supply of necessary quantity of sand from a distance not exceeding 8km. (5 miles) from the site of work and including watering, dressing etc. Rate to include cost of all materials, labour and T & P etc. required for proper completion of the work. (Rate is Including Royality) S.No 255 |
| 8 | Providing and counstruction of granular sub- base by providing coarse material spreading in uniform layers with moter grander in perpared surface,mixing by mix in place method 2% cement (OPC) with rotavator at OMC, and compacting with smooth wheel roller to achieve the desired density complete as per techncial specification clause 401.Including labour,material and T&P as per instruction by E/I.(Analysis rates) |
| 9 | Providing and laying of 80 mm Interlocking concrete block pavement laid in stone dust base and fill joint with fine sand. Joint filled labling and dressing base including supply of all material, labour, T&P etc required for proper completion of the work. (New Item No - 3 of flooring) |
| 10 | Earth work in cutting ot in filling in ordinary soil, excavation to be in the form of regular pits not exceeding 1/2 meter (20\")in depth and earth work in emvankment to be in 20cm (8\")layers, including ramming & dressing the surface to required levels and slopes and also including 1.5 mete (5fts) lits and 30 m (100\") lead. The earthfrom cutting to be used in making filling or to be deposited as spoil banks within 30 meters (100 fts) distance as directed by Engineer-in-charge (Rate is including Royality) SI No. 253 |
| 11 | Cement concrete with 4cm (1.5\"\") gauge approved stone ballast approved coarse sand and cement in the proportion of 8:4:1 Including supply of all materials labour and T&P etc. required for proper completion of the work. New Item (a) as in item. 281 |
| 12 | First class brick work in 1:4 cement and fine sand of 1.25 FM. Mortar in foundation and plinth including supply of all materials, labour and T&P etc. required for proper completion of the work.SI N0. 305 |
| 13 | R.C.C. work with cement approved coarse sand and 2 cm. (3/4\"\") gauge approved stone ballast in the proportion of 1:1:5:3 in lintels of doors sand windows excluding supply of reinforcement and its binding but including its fixing and binding the same with 24 B.W.G.G.I binding wire and including necessary centering and shuttering etc. and aslo including supply of all materials, labour & T & P etc. required for proper completion of the work. Binding wire cost being included in the item but for heavier beemS.No286(1) |
| 14 | \"Mild steel or iron in plain work such as reinfored concrete or reinforced brick work (when not include in an over all rates) wrouhgt to required shape as necessary including bending for proper completion of the work and icnluding supply of all steel and wastage & overlaping & hooks.Sl No. 504 |
| 15 | Painting or Varnishing on wall with one coat of ready mixed priming paint & two coat of approved superior quality ready mixed paint of clear synthetic varnish including supply of all materials, labour and T & P etc. required for proper completion of the work. As par SI No 641 and 642 |
| 16 | Dismantling reinforcement cement concrete or reinforcement brick work, including stacking of materials as directed by Engineer- in- charge with in a distance of 60 mt ( 200 Feet ) As par S.I No 694 |
| 17 | Stone work (machine cut edges) for wall lining etc. (veneer work) upto 1 metre height, backing filled with a grout of average 12 mm thick cement mortar 1:3 (1 cement : 3 coarse sand) including pointing in white cement mortar 1:2 (1 white cement : 2 stone dust) with an admixture of pigment matching the stone shade : (To be secured to the backing and the sides by means of cramps and pins which shall be paid for separately) :Red sand stone - Exposed face machine cut and table rubbed with rough backing. 50 mm thick.DSR 7.23.2.3/2016 |
| 18 | Providing and fixing stone jali 40 mm thick throughout in cement mortar 1:3 (1 cement : 3 coarse sand), including pointing in white cement mortar 1:2 (1 white cement : 2 stone dust) with an admixture of pigment, matching the stone shade, jali slab without any chamfers etc. Red sand stone.DSR 7.33.1/2016 |
| 19 | supply and fixing foundation/inaugerationgranite stone including writing works, loading, unloading etc complete in all respects.As per direction of engeener- in-charg. |
| 20 | Supply and laying of Ordinary soil for embankment to be in 20 cm layers including ramming & dressing the surface to required leveles and slopes |
| 21 | Cleaning and painting of statue and including materials labour and T&P complete in all respects |
| 22 | Supply and fixing of stainless steel gate Chapter No 10 S.I No 5 New Item (size 1.2 x 1.3 M) Assume Weight = 54 KG |
| 23 | Supply and fixing of factory wired integral LED flood light luminaires with die cast aluminium housing built with dirver set suitable for 170 to 200 Watt. Confirming to IP 66 protection complete in all respect. CAT- AAA |
