Construction Of Guard Room Store Office Room And Painting Work Of Administrative Block And Boundrywall In Distillery Unit
Tender Value
Ref. Documents
Estimated cost
Bid Submission
13 Mar 2023
0 days left
EMD
10000
Bank guarantee accepted
Document Fee
590
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
ghosi → Uttar Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Construction Of Guard Room Store Office Room And Painting Work Of Administrative Block And Boundrywall In Distillery Unit
BOQ
| Sl. No. | Item Description |
| 1 | PARTICULARS |
| 2 | Excavation in foundation in ordinary soil (loam clay or sand) including lift up to 1.50m and lead up to 30m and including filling watering and ramming of excavated earth in t6o the space between the building and sides of foundation trenches or in the plinth and removal and disposal of sulpreus earth ad directed by the engineer in charge uip to a distance of 30m from the foundation trenches including all t&p phjowrah & basket etc. |
| 3 | Providing and laying in cement concrete1:5:10(1:cement5: fine sand10 graded brick agregate 40 mm nominal size Pand curing complete including cost of formwork in foundations and floors. |
| 4 | M150 Brickwork in 1:4 cement and coarse sand of 1.25 fm in foundation and plinth including supply of all labour,material,t&p etc |
| 5 | RCC work with cement approved coarse sand and 2cm(3/4)gauge approved stone ballast in proportion of 1:2:4 in lighter beams having span above 6mts excluding supply of reinforcement and its bending but including its fixing and binding but including its fixing and binding the same with 245 bwg binding wire and including necessary centering and shuttering etc and also including supply of labour materials tools and plants etc required for proper completition of work strenght of the concrete shall not be less than m150. |
| 6 | m150 brickwork in 1:4 cement and coarse sand of 1.25fm in superstructure forwall of one brick thick including all baour,material,t&p etc. |
| 7 | RCC work with cement approved coarse sand and 2cm(3/4)gauge approved stone ballast in proportion of 1:2:4 in lintels of doors and windows excludingsupply of reinforcement and its bending but including its fixing and binding but including its fixing and binding the same with 245 bwg binding wire and including necessary centering and shuttering etc and also including supply of labour materials tools and plants etc required for proper completition of work strenght of the concrete shall not be less than m150. |
| 8 | RCC work with cement approved coarse sand and 2cm(3/4)gauge approved stone ballast in proportion of 1:2:4 in T beams Roofs slabs and rcc columns. excluding supply of reinforcement and its bending but including its fixing and binding but including its fixing and binding the same with 245 bwg binding wire and including necessary centering and shuttering etc and also including supply of labour materials tools and plants etc required for proper completition of work strenght of the concrete shall not be less than m150. |
| 9 | 12 mm thick plaster in 1:6 cement and fine sand of 1.25 finness modulus including supplly of labour material t&p etc. |
| 10 | 25mm thick 1:2:4 plain cement concrete floor with cement,approved coarse sand and 20 mm graded approved stone laid in panels finished with 3mm flooring of neat cement including supply of all labour,material,t&p etc |
| 11 | finishing wall with waterproff cement paint of approved make and quality on new work with two coats to give an even shade including supply of all labour,material,t&p etc |
| 12 | Supply and fixing of flush door of commercial quality conforming to is2202 part(1983) including fixing of wooden cleats and stoppers and including fixing and adjustment of hinges(32mm thick) |
| 13 | Mild steel or iron work in plain work such as reinforced cocrete or reinforced brick work(when not included in over all rates) wrought to requirede shap as necessary including bending for proper completition of work (labour rate only) |
| 14 | mild steel or iron work in small sizes and sections such as holding down bolts,hold fast tie rods,grating etcwrought to reqyuired shape as necessary for bending etc including supply of tseel and its wastage including cost of bolts,nuts if required,welding ,grinding and making holes as required for prioper completition of work. |
| 15 | painting or varnishing on iron works in small areas or new wood work witrh one coat of ready mixed priming coat and one coat ofsuperior ready mixed paintof clear synthetic vanish including all,labour,material,t&p etc.paint used should confirm to the ISI no 103 1950 |
| 16 | Supply and fixing anodises alumunium door having 2mm thick alumunium section. |
| 17 | Finishing wall with waterproff cement paint of approved make and quality on previously painted old surface with two coats to give an even shade including supply of all labour,material,t&p etc |
| 18 | Colour washing two coat using approved colouring material of buff,blue gray or brown shade including supply of all materials,labours t&p etc required for proper completition of work. |
AI Tender Summary
Tender Timeline
Mar 07, 2023
11:30 IST
Tender Published
Tender notice published.
CompletedMar 13, 2023
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedMar 13, 2023
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender