Tender For Construction Of Techno Booth In Central Library At Permanent Campus Of Iit Ropar
Tender Value
2.68 Lakhs
Estimated cost
Bid Submission
17 Mar 2023
0 days left
EMD
5380
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Rupnagar → Punjab
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Construction Of Techno Booth In Central Library At Permanent Campus Of Iit Ropar
BOQ
| Sl. No. | Item Description |
| 1 | Civil Items |
| 2 | Providing and fixing plain lining with necessary screws/nuts & bolts/nails, including a coat of approved primer on one face and fixed on wooden/steel frame work, complete as per direction of Engineer-in-charge (Frame work shall be paid for separately) |
| 3 | 12 mm thick comerical ply conforming to IS:1328 BWR type |
| 4 | Providing and fixing decorative high pressure laminated sheet of plain/wood grain in gloss/matt/suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS:2046 Type S, including cost of adhesive of approved quality/ |
| 5 | 1.0 mm thick |
| 6 | Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trussess etc, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete |
| 7 | Hot finished welded type tubes |
| 8 | Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete |
| 9 | Painting with synthetic enamel paint of approved brand and |
| 10 | Two or more coats on new work |
| 11 | Providing and fixing carbon steel galvanised (minimum coating 5 micron) dash fastener of 10 mm dia double threaded 6.8 grade (yield strength 480 N/mm2), counter sunk head, comprising of 10 mm dia polyamide PA 6 grade sleeve, including drilling of hole in frame concrete/ masonry, etc. as per direction of Engineer-in-charge. |
| 12 | 10 X 120 mm |
| 13 | Providing and fixing 50 mm bright finished brass cup board or wardrobe knob of approved quality with necessary screws |
| 14 | Providing and fixing magnetic catcher of approved quality in cupboard/ward robe shutters including fixing with necessary screws etc. complete |
| 15 | Double strip (horizontal type) |
| 16 | Electrical works |
| 17 | Supplying and fixing metal box of 150 mm X 75 mm X 60 mm deep (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including providing and fixing 3 pin 5/6 A socket outlet and 5/6piano type switch connections, painting etc as required. |
| 18 | Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/recessed steel/PVC conduit as required. |
| 19 | 1 X 1.5 sqmm |
| 20 | Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. |
| 21 | 20 mm |
| 22 | Recessed downlight with pressure die-cast aluminium housing for effective thermal management and HET diffuser for better performance. |
| 23 | 9 Watts |
AI Tender Summary
Tender Timeline
Mar 07, 2023
11:30 IST
Tender Published
Tender notice published.
CompletedMar 17, 2023
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedMar 17, 2023
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender