Tender For Construction Of Boundary Wall In Kasturba Gandhi Valika Vidhyalaya, Dumaria Under Dumaria Block, District East Singhbum.
Tender Value
52.54 Lakhs
Estimated cost
Bid Submission
14 Mar 2023
0 days left
EMD
1.06 Lakhs
Bank guarantee accepted
Document Fee
10000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
dumaria → Jharkhand
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Construction Of Boundary Wall In Kasturba Gandhi Valika Vidhyalaya, Dumaria Under Dumaria Block, District East Singhbum.
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in excavation in foundation trenches in ordinary soil (vide classification of soil item -A) and disposal of excavated earth as obtained to a distance up to 50 M including all lifts , levelling , ramming the foundationtrenches , removing roots of trees , shrubsall compete as per approved design , building specification and direction of E/I. |
| 2 | Extra for earth work in hard soil as per specification and direction of E/I (vide classification of soil item b) |
| 3 | Providing coarse clean sand in filling or in plinth including ramming and watering in layers not exceeding 150mm thick with all leads and lifts including cost of all material , lobour , royality and taxes all complete as per building specifiction and direction of E/I (Mode of measurment compacted volume) |
| 4 | Providing designation75 A one brick flat soiling filled with local sand including cost of waterin taxes royalty all complete as per building specification anddirection of E/I |
| 5 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:3:6 (1 Cement : 3 coarse sand (zone-III) : 6 graded stone aggregate 20 mm nominal size) |
| 6 | Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level. 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III): 3 graded stone aggregate 20 mm nominal size) |
| 7 | Providing designation 75 Abrick work in C.M.(1:6) in superstructure with approved quality of clean coarse sand of F.M. 2 to 2.5including providing 10 mm thick mortar joints , cost of screening materials , raking out joints to 15 mm depth , curingtaxes and royality all complete as per building specification and direction of E/I |
| 8 | Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement : 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mmnominal size) |
| 9 | Centering and shuttering including strutting, propping etc. and removal of form for Foundations, footings, bases of columns, etc. for mass concrete |
| 10 | Centering and shuttering including strutting, propping etc. and removal of form for Lintels, beams, plinth beams, girders, bressumers and cantilevers |
| 11 | Centering and shuttering including strutting, propping etc. and removal of form for Columns, Pillars, Piers, Abutments, Posts and Struts |
| 12 | Providing 12mm. Thik cement plaster(1:6) with clean coarse sand of F.M. 1.5 including screening , curing with all leads and lifts of water , scaffholding taxes and all complete as per building specification and direction of E/I |
| 13 | Providing two coats of showcem of approved shade and make over a coat of cement primeron newsurface includingpreparing the plastered surface smooth with sand paper , scaffolding , curing and taxes all complete as perbuilding specification and direction of E/I. |
| 14 | Providing Tor steelreinforcement of 10 mm,12 mm & 16 mm dia bars as per approved design and drawing excluding carriage of M.S. bars to work site,cutting ,bending and binding with annealed wire with cost of wire ,removal of rust , placing the rods in position all complete as per buildingspecification and direction of E/I. TMT Fe 500 (Only valid for sail & TATA Steel)(B,C) 12,16 mm (TMT coil Fe 500)(Only valid For SAIL & TATA STEEL |
| 15 | Providing Tor steelreinforcement of 10 mm,12 mm & 16 mm dia bars as per approved design and drawing excluding carriage of M.S. bars to work site,cutting ,bending and binding with annealed wire with cost of wire ,removal of rust , placing the rods in position all complete as per buildingspecification and direction of E/I. TMT Fe 500 (Only valid for sail & TATA Steel) (A) 10 mm (TMT coil Fe 500)(Only valid For SAIL & TATA STEEL) |
| 16 | Providing Tor steelreinforcement of 8 mm dia bars as per approved design and drawing excluding carriage of M.S. bars to work site,cutting ,bending and binding with annealed wire with cost of wire ,removal of rust , placing the rods in position all complete as per buildingspecification and direction of E/I. TMT Fe 500 (Only valid for sail & TATA Steel)8 mm (TMT coil Fe 500)(Only valid For SAIL & TATA STEEL |
| 17 | Filling in foundation trenches and plenth in layers not exceeding 150 mm. thick well watered , rammed ,fully compacted and fine dressed with earth obtained from excavation of foundationtrenches within a lead of 50M and lift in 1.5M all complete as per building specification and direction of E/I (Mode of measurment compacted volume ) |
| 18 | Suppling , fitting and fixing M.S. grill gate made of 20 x6mm M.S. flats or 16mm. M.S. square barsfitted on 25 x 25 x 6mm .M.S. Angle frameof size60x60x6mmincluding cost of fabrication , providingnecessary locking arrangment with haskal and dummy duly fixed in P.C.C. (1:2:4) blocks of required size applied a primingreddia G.I pipe fitted and fixed in floor outlet to drain out water , in cement concrete including cutting hole , making good the wall allcompleteas per building specification and diretion of E/I |
| 19 | Supplying ,fitting and fixing M.S. grill made of20x 6mmM.S. flat as per approved design and drawing ,properly fabricated with joints continious fillet weided and finisged smooth ,carriage of grill to work site , hoisting as per building specification and direction of E/I (where materials is not supplied by the deptt.) |
| 20 | Providing primer one coat of red lead paint of approved make over new steel surfaceincludingpreparing the surface after cleaning , removing dust, dirt , scales , smokes , grease and cleaning the surface throughly including cost of scaffoldingtaxes all complete as per building specification and direction of E/I. |
| 21 | Providingtwo coats ofpainting with ready mixed paint of approved shade and make over steel surface includingcleaningthe surface throughlyscaffolding andtaxes all complete as per building specification and direction of E/I. |
| 22 | Carriage of materials:-(i) Bricks(lead 10 km) |
| 23 | ii) Sand(lead 20 km) |
| 24 | iv) stone Chips-lead 75KM |
| 25 | v) Cement+Steel(lead 85 km) |
| 26 | GST @ 18% |
| 27 | Labour cess @ 1% |
AI Tender Summary
Tender Timeline
Mar 07, 2023
11:30 IST
Tender Published
Tender notice published.
CompletedMar 14, 2023
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedMar 16, 2023
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender