|
| 1 | Item Description/ Heading |
| 2 | 1. Repairing of Barrel portion of 01 no cylinder- Tail of cylinder cutting on the lathe machine: 01 no @ Rs. 2800 /- = Rs. 2800 /-, Gland portion of cylinder repairing: 01 no @ Rs. 3500 /- = Rs. 3500 /-, Cost of seamless barrel: 01 no @ Rs. 5000 /- = Rs. 5000 /-, Boring of barrel both side as per required dia standard including grinding of the same: 01 no @ Rs. 1500 /- = Rs. 1500 /-, Eye fitting on cylinder by welding woth 680 Lt electrode: 01 kg @ Rs. 2500 /- = Rs. 2500 /-, Honing and polishing of inner portion of cylinder fully: 01 no @ Rs. 2000 /- = Rs. 2000 /-1.1 Repairing of Piston portion of 01 no Boom cylinder- Boom cylinder piston seal portion welding, machining, grinding & polishing: 01 no @ Rs. 3200 /- = Rs. 3200 /-, Cylinder checknut thread making std size: 01 no @ Rs. 3000 /- = Rs. 3000 /-, Alignment of bend portion of cylinder rod: 01 no @ Rs. 3800 /- = Rs. 3800 /-, Cylinder rod complete portion spray welding machining: 01 no @ Rs. 3200 /- = Rs. 3200 /-, Scratch portion of cylinder rod grinding and polishing: 01 no @ Rs. 1500 /- = Rs. 1500 /- Total(1+1.1) = Rs. 32000 /- |
| 3 | 2. Repairing and overhauling of charging pump and hyraulic pump- Charging pump dismantling: 01 no @ Rs. 525 /- = Rs. 525 /-, Charging pump body face surfacing on both side: 01 no @ Rs. 1575 /- = Rs. 1575 /-, Charging pump body bore welding and machining: 01 no @ Rs. 1575 /- = Rs. 1575 /-, Charging pump drive gear face grinding: 02 no @ Rs. 735 /- = Rs. 1470 /-, Charging pump drive gear both side welding and teeth cutting: 01 no @ Rs. 2100 /- = Rs. 2100 /-, Thrust plates face surfacing both sides: 02 no @ Rs. 735 /- = Rs. 1470 /-, Gear face surface surfacing both side: 02 no @ Rs. 735 /- = Rs. 1470 /-, Main drive gear damaged teeth welding: 01 no @ Rs. 2100 /- = Rs. 2100 /-, Charging pump overhauling and fitting: 01 no @ Rs. 2300 /- = Rs. 2300 /-, Piston ith pin main bearing of charging pump: 04 no @ Rs. 1000 /- = Rs. 4000 /-, Seal kit: 01 set @ Rs. 1250 /- = Rs. 1250 /-, Sprocket teeth: 01 no @ Rs. 1575 /- = Rs. 1575 /-, Hyraulic pump dismantling: 01 no @ Rs. 2000 /- = Rs. 2000 /-, Pump body face surfacing on both sides: 01 no @ Rs. 2400 /- = Rs. 2400 /-, Pump body bore welding and machining: 01 no @ Rs. 3100 /- = Rs. 3100 /-, Drive gear face grinding both side: 01 no @ Rs. 2400 /- = Rs. 2400 /-, Drive gear teeth wleding, machining and cutting: 01 no @ Rs. 4500 /- = Rs. 4500 /-, Thrust plate face surfacing both side: 01 no @ Rs. 2800 /- = Rs.2800 /-, Cover face surfacing both side: 01 no @ Rs. 2800 /- = Rs. 2800 /-, Drive shaft spline welding and machining: 01 no @ Rs. 3500 /- = Rs. 3500 /-, Pump overhauling and fitting: 01 no @ Rs. 3000 /- = Rs. 3000 /-, Bush: 06 no @ Rs. 450 /- = Rs. 270 /- Seal kit: 01 set @ Rs. 4500 /- = Rs. 4500 /- Total(2) = Rs. 55110 / |
| 4 | 3. Repairing of wheel end assembly and both side rear brake assembly of payloader- Brake kit: 02 no @ Rs. 9500 /- = Rs. 19000 /-, Piston housing welding and machining: 08 no @ Rs. 1800 /- = Rs. 14400 /-, Brake bolt and washer: 12 no @ Rs. 370 /- = Rs. 4440 /-, Both side brake system overhauling: 02 no @ Rs. 5000 /- = Rs. 10000 /-, Both side brake system dismantling and fitting: 02 no @ Rs. 1000 /- = Rs. 2000 /-, Both side wheel end assembly overhauling: 02 no @ Rs. 4000 /- = Rs. 8000 /-4. Repairing / overhauling of steering booster cylinder both side- Barrel portion repairing of tail cylinder on lathe machine: 02 no @ Rs. 1200 /- = Rs. 2400 /-, BP gland portion of cylinder parting full: 2 nos @ Rs. 1500 /- = Rs. 3000 /-, BP cost of seamless barrel: 02 no @ Rs. 2400 /- = Rs. 4800 /-, BP boring of barrel both side including grinding: 02 no @ Rs. 650 /- = Rs. 1300 /-, Threading of gland & fitting into cylinder: 02 no @ Rs. 1200 /- = Rs. 2400 /-, Eye fitting on cylinder with 680 LT rod: 02 no @ Rs. 1100 /- = Rs. 2200 /-, Homing & polishing of inner portion: 2 nos @ Rs. 1400 /- = Rs. 2800 /-, PP stick cylinder piston seal portion welding: 02 no @ Rs. 1300 /- = Rs. 2600 /-, PP cylinder checkout thread std size: 02 no @ Rs. 1500 /- = Rs. 3000 /-, PP alignment of bend portion cylinder rod: 02 no @ Rs. 1200 /- = Rs. 2400 /- Total(3+4) = Rs. 84740 /- |
| 5 | 5. FIP injector 6 nos repairing and overhauling- FIP repl of turbo full assembly: 01 set @ Rs. 8050 /- = Rs. 8050 /-, FIP repl of turbo kit: 01 set @ Rs. 3500 /- = Rs. 3500 /-, Pump element: 6 no @ Rs. 795 /- = Rs. 4770 /-, Delivery valve: 06 no @ Rs. 425 /- = Rs. 2550 /-, Nozzles: 06 no @ Rs. 1425 /- = Rs. 8550 /-, Governer kit: 02 set @ Rs. 735 /- = Rs. 1470 /-, Pump kit: 01 set @ Rs. 875 /- = Rs. 875 /-, Gaskit pump: 1 set @ Rs. 645 /- = Rs. 645 /-, Governor assembly: 01 set @ Rs. 6090 /- = Rs. 6090 /-, Nozzle adaptor: 06 no @ Rs. 300 /- = Rs. 1800 /-, FIP bearing: 02 no @ Rs. 450 /- = Rs. 900 /-, Pinion (42 teeth): 01 no @ Rs. 3000 /- = Rs. 3000 /-, AC pump kit: 1 set @ Rs. 500 /- = Rs. 500 /-, Spring: 06 no @ Rs. 295 /- = Rs. 1770 /-, FIP pump overhaul labour charge: 01 set @ Rs. 800 /- = Rs 800/- Total(3+4) = Rs. 45270 /- |
| 6 | Total impact of GST for the purpose of CTC |
