Tender For Construction . Of Road And Drain Druwakar Kirana To Ajit Magar To Premchand Nivas In W.N.15
Tender Value
59.44 Lakhs
Estimated cost
Bid Submission
14 Mar 2023
0 days left
EMD
59446
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
parbhani → Maharashtra
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Construction . Of Road And Drain Druwakar Kirana To Ajit Magar To Premchand Nivas In W.N.15
BOQ
| Sl. No. | Item Description |
| 1 | Excavation for roadway in earth, soil of allsorts, sand, gravel or soft murum includingdressing section to the required grade, camber andside slopes and conveying the excavated materialswith all lifts upto a lead of 50m. and spreading forembankment or stacking as directed.MORTH 301SSR OF 2022-23 ITEM NO. 2.11 & PAGE NO.23 |
| 2 | Conveying materials obtained from roadcutting including all lifts, laying in layers of20cm. to 30cm. breaking clods, dressing to therequired lines, curves, grades and section, wateringand compacting to not less than 97% of standardproctor density for a lead of 300m. to 500m.inclusive, from the site of excavation to the site ofdeposition as directed.MORTH 305SSR OF 2022-23 ITEM NO. 2.26 & PAGE NO.25 |
| 3 | Providing earth work in embankment withapproved materials obtained from othersources upto lead of 50m. including all lifts, layingin layers of 20cm. to 30cm. thickness breakingclods, dressing to the required lines, curves, grades& section, watering and compaction with vibratoryroller with V-Sat attachment to achieve notless than 97 % of standard proctordensity etc. complete ( Material obtained fromOther sources)MORTH 305SSR OF 2022-23 ITEM NO. 2.28 & PAGE NO.25 |
| 4 | Construction of granular sub-base by providingclose graded Material, mixing in a mechanical mixplant at OMC, carriage of mixed Material to worksite, spreading in uniform layers with motor grader/Paver on prepared surface and compacting withvibratory power roller to achieve the desireddensity, complete as per clause 401 -- Plant MixMethod and Grading - I MaterialMORTH 401SSR OF 2022-23 ITEM NO. 3.01 & PAGE NO.27 |
| 5 | Wet Mix Macadam -- Providing, laying,spreading and compacting graded stoneaggregate to wet mix macadam specificationincluding premixing the Material with water at OMCin mechanical mix plant carriage of mixed Materialby tipper to site, laying in uniform layers with paverin sub- base / base course on well prepared surfaceand compacting with vibratory roller to achieve thedesired density. Laying By Grader/Paver.MORTH 406SSR OF 2022-23 ITEM NO. 3.23 & PAGE NO.30 |
| 6 | Surface Dressing -- Providing and laying surfacedressing as wearing course in single coat usingcrushed stone aggregates of specified size on alayer of bituminous binder laid on prepared surfaceand rolling with 8-10 tonne smooth wheeled steelroller. --a) 19 mm nominal chippling size (bitumen12.00 kg/10 Sq.M.) -- Bitumen of specified grade(VG-30 bulk bitumen rates are considered to arriveaMtO rRaTteHs )509SSR OF 2022-23 ITEM NO. 4.04 & PAGE NO.35 |
| 7 | DENSE BITUMINOUS MACADAM:--Providing andlaying dense bituminous macadam using crushedaggregate of grading 1, premixed with bituminousbinder Bitumen of specified grade,@ 4.50 % byweight of total mix and filler, transported at sitewith VTS, laid over a previously prepared surface ,finished to the required grade ,level, alignment,androlling to achieve the desired density for 76/100mm compacted thickness with drum mix type hotmix plant with SCADA having complying essentialfeatures of Hot mix plant as per IRC-27-2009specified conditions and attachments such aselectronic load sensor based belt conveyers,automatic synchronization of bitumen andaggregate fedder,built in dust controller system andPLC for Drum Mix plant ,Sensor paver, andVibratory roller excluding prime/Tack coat etc.complete --Bitumen VG-30 grade with stonedust filler (VG-30 bulk bitumen rates areconsidered to arrive at rates)MORTH 507SSR OF 2022-23 ITEM NO. 3.46 & PAGE NO.34 |
| 8 | Providing and applying tack coat on the preparedsurface heating by fames in Boiler and sprayingbitumen with sprayer on Dry / Hungry B.T. surface3 kg/10 sqm. (VG-30 bulk bitumen rates areconsidered to arrive at rates)MORTH 503SSR OF 2022-23 ITEM NO. 3.31 & PAGE NO.30 |
| 9 | BITUMINOUS CONCRETE:--Providing and layingbituminous concrete using crushed aggregate ofgrading 1, premixed with bituminous [email protected]% by weight of total mix and filler,transported at site with VTS, laid over a previouslyprepared surface, finished to the required grade,level, alignment, and rolling to achieve the desireddensity for 50mm compacted thickness with drummix plant with SCADA, Sensor paver and Vibratoryroller excluding prime/Tack coat etc. complete --Bitumen of specified grade with stone dustfiller. (VG-30 bulk bitumen rates areconsidered to arrive at rates)MORTH 509SSR OF 2022-23 ITEM NO. 3.5 & PAGE NO.34 |
| 10 | Providing bituminous Type A liquid seal coat onbituminous surface including supplying allmaterials & bitumen of VG-30 grade preparingexisting road surface, heating and applyingbitumen @ 0.98 KgSqm. by mechanical means,spreading chips and rolling, by static roller havingweight 8 to 10 MT. etc. complete.MORTH 513SSR OF 2022-23 ITEM NO. 4.01 & PAGE NO.35 |
| 11 | Excavation for catch / side water gutter in allsorts of soils to the specified section includingstacking the excavated stuff in a regular bund anddisposing of unsuitable or excess stuff as directedall sorts of soils.MORTH 309SSR OF 2022-23 ITEM NO. 2.18 & PAGE NO.24 |
| 12 | Providing soling using 80 mm size trap metal in15 cm. layer including filling voids with Crushedsand/grit, ramming, watering etc. complete.As directed by Engineer in charge.SSR OF 2022-23 ITEM NO. 21.4 & PAGE NO.157 |
| 13 | Providing and laying in situ cement concrete ofM10 proportion with trap/ granite/ quartzite/gneiss metal in foundation including necessaryform work, compacting and curing etc. complete.(with reversible drum rtype mixer with SCADAwith natural sand)CD.-3 Page.No. 160SSR OF 2022-23 ITEM NO. 11.02 & PAGE NO.81 |
| 14 | Providing and fixing in position TMT - FE - 500bar reinforcement of various diameters forR.C.C. pile caps, footings, foundations, slabs,beams columns, canopies, staircase, newels,chajjas, lintels pardis, copings, fins, archesetc. as per detailed designs, drawings andschedules. including cutting, bending, hooking thebars, binding with wires or tack welding andsupporting as required complete.Bd.F.17, Page No. 306SSR OF 2022-23 ITEM NO. 26.33 & PAGE NO.188 |
| 15 | Providing and laying in situ / ready mix M20 RCCof trap/ granite/ quartzite/ gneiss metal forRCC work of ballast walls, kerbs and boxreturns including scaffolding, compaction,formwork finishing and curing etc. complete.(excluding reinforcement, with fully automaticmicro processor based PLC with SCADA enabledconcrete batch mix plant / pan mixer with fineagreegates of required specifications ( VSI sandfinely washed etc ) (A) RCC work of Ballastwalls & KerbBR.50 Page No. 143 and B. 7, Page No.38SSR OF 2022-23 ITEM NO. 14.44 (a) & PAGE NO.96 |
| 16 | Providing and laying in situ / ready mix M-20cement concrete of trap /granite /quartzite/gneiss metal for approach slab / Rigidpavement including compacting, finishing, curingetc. complete. (excluding reinforcement) (withreversible drum type mixer/ concrete batch mixplant (pan mixer) with SCADA with fine agreegatesof required specifications (Natural sand / VSI sandfinely washed etc ), cement 6.40 bags/cumt)CD.15 Page.No. 168 and B.7. Page No. 38SSR OF 2022-23 ITEM NO. 11.25 & PAGE NO.82 |
| 17 | Providing and laying Cast in situ/Ready Mixcement concrete M-20 of trap / granite/quartzite/ gneiss metal for R.C.C. beams andlintels as per detailed designs and drawings or asdirected including steel centering, formwork, coverblocks, laying/pumping, compactionand rougheningthe surface if special finish is to be provided andcuring etc. complete. (Excluding reinforcement andstructural steel). with fully automatic microprocessor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate ( Crushed sand VSI Grade )Bd.F.6 Page No. 300 and B.7, Page No.38SSR OF 2022-23 ITEM NO. 25.5 & PAGE NO.181 |
| 18 | Providing and fixing heavy duty inter lockingconcrete Rubber mould glossy paving blocksof 80 mm thickness of having a strength of 400kg/Sq.cm. of approved quality and shape on a bedof crushed sand of 25 to 30 mm thick includingskirting joints and cleaning etc. complete. (using100% crushed sand)Bd. M.SSR OF 2022-23 ITEM NO. 33.54 & PAGE NO.219 |
| 19 | Providing and fixing board displayinginformation, such as \"Name of work, Tendercost, Name of Contractor, Work completionand liability period etc., having rectangular shapeof 1.20m x 0.90m size made out 18 gauge(1.25mm) thick mild steel sheet painted with onecoat of Zinc chromate stoving primer and two coatsof enamel paint on front side and grey stoveenamel on back side and border / messages /symbols etc. with approved colour shade paintcomplete, on M.S.angle of size 35 x 35 x 3 mmframe with properly cross braced M.S. angles ofsize 35mmx35mmx3mm duly painted including TwoM.S. angle iron posts of size 65 mm x 65 mm x 6mm, 3.65 m long painted with alternate black andwhite bands of 25 cm width including all fixturesetc.and fixing the boards in 1:4:8 concrete block ofsize 60 cm x 60 cm x 75 cm including, excavation,refilling, transportation, and labour etc complete.MORTH 801 & As directed by Engineer in ChargeSSR OF 2022-23 ITEM NO. 6.36 & PAGE NO.60 |
| 20 | ROYALTY CHARGES FOR SAND |
| 21 | ROYALTY CHARGES FOR OTHER MINERALS |
| 22 | BASIC TEST OF AGGREGATEWater Absorption, Specific Gravity, Impact Value,Crushing Value |
| 23 | BITUMENPenetration, Softening Point, Flash & Fire Point,Specific Gravity. |
| 24 | CONCRETE PAVING BLOCKCompressive strength, Water Absorption (Set of 8Blocks), Flexural Test (Set of 8 Blocks ), Resistanceto wear (Set of 8 Blocks ) |
| 25 | CONCRETECompressive strength of C.C.Cube (Set of 3 cubes) |
| 26 | STEEL BAR TESTINGUpto 16 mm (Set of 3 Bars) |
| 27 | ADD 0.5% CONSULTANCY CHARGES ON A+B |
| 28 | ADD 1% THIRD PARTY AUDIT ON A+B |
| 29 | ADD 18% GST ON 22 & 23 |
AI Tender Summary
Tender Timeline
Mar 06, 2023
11:30 IST
Tender Published
Tender notice published.
CompletedMar 14, 2023
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedMar 17, 2023
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender