Tender For Installation Of Submersible Pump Near Ansarul House S/O Late Nurul Islam At Maharajpur At Maharajpur G.P. Under Ratua-Ii Dev. Block, Malda.(Activity Code-66501768)
Tender Value
1.93 Lakhs
Estimated cost
Bid Submission
14 Mar 2023
0 days left
EMD
3880
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
maharajpur → West Bengal
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Installation Of Submersible Pump Near Ansarul House S/O Late Nurul Islam At Maharajpur At Maharajpur G.P. Under Ratua-Ii Dev. Block, Malda.(Activity Code-66501768)
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in excavation of foundation trenches etc. in all sorts of soil (including mixed soil but excluding Laterite or sandstone) including removing, spreading or stacking the spoils within a lead of 75 m as directed. The item includes necessary trimming the sides of trenches, leveling, dressing and ramming the bottom properly including bailing /pumping out water from the bed, as required & directed by the Engineer-in-charge, complete. With depth of excavation not exceeding 1.50 m. |
| 2 | Single Brick Flat Soling of picked jhama bricks including ramming and dressing bed to proper level and filling joints with powered earth or local sand, as per direction of Engineer-in-Charge. |
| 3 | Ordinary Cement Concrete with graded stone ballast (40 mm size) excluding shuttering etc. as per direction of Engineer-in-charge, complete.In 6:3:1 proportion. |
| 4 | Hire and labour charges for shuttering with centering and necessary staging upto 4 m using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, beams and columns, lintels curved or straight including fitting, fixing and striking out after completion of works (upto roof of ground floor). |
| 5 | Ordinary Cement Concrete ( Mix 3:1.5:1) with graded stone Chips (20 mm size) excluding shuttering & reinforcement, if any, in Ground floor as per IS 456-2000. Using Stone material of Raj Mahal variety |
| 6 | Reinforcement for reinforced concretework in all sorts of structures including distribution bars, stirrups, binders etc. including supply of rods, initial straightening and removal of loose rust (if necessary), cutting to requisite length, hooking and bending to correct shape, placing in proper position and binding with 16 gauge black annealed wire at every inter-section, complete as per drawing and direction. Tor / Mild Steel. |
| 7 | 125 mm. thick brick work with 1st class bricks in cement mortar (1:4) inground floor. |
| 8 | Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course,scaffolding/staging where necessary (Ground floor).[Excluding cost of chipping over concrete surface].(ii) With 1:4 cement mortar. (c) 10 mm thick plaster. |
| 9 | M.S. or W.I. Ornamental grill of approved design joints …..................... Cscrews and lugs in ground floor |
| 10 | Artificial stone in floor, dado, staircase etc with cement concrete (1:2:4) with stone chips, laid in panels as directed with topping made with ordinary or white cement (as necessary) and marble dust in proportion (1:2) including smooth finishing and rounding off corners including raking out joints or roughening of concrete surface and application of cement slurry before flooring works using cement @ 1.75 kg/sq.m all complete including all materials and labour. |
| 11 | Supplying, fitting fixing of 1st quality Ceramic tiles of any size having mat finish in walls and floors including borders to match with the existing work, set in sand cement mortar (4:1) including backing concrete (1:2:4) & 4 nos of key stones (10 mm) fixed with araldite at the back of each tile & finishing the joints with white cement mixed with colouring oxide of required to match colour of tiles. (B) Wall |
| 12 | Priming one coat on steel or/Iron surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc. |
| 13 | Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary:With super gloss (hi-gloss) -(iv) Two coats (with any shade except white).A) Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary:With super gloss (hi-gloss) -(iv) Two coats (with any shade except white). |
| 14 | Providing & fixing Concrete Sign Board as per IRC specification of size 900 x 750 x 37 mm. thick made with RCC 1:Providing & fixing Concrete Sign Board as per IRC specification of size 900 x 750 x 37 mm. thick made with RCC 1:1½:3 with pakur variety stone chips reinforced with double layer IRC febric (75 x 75 mm. mesh) and fixed with necessary nuts & bolts on two RC precast posts 100 mm. x 150 mm. of height 2.65 m. of which top 750 mm. is of section 100 x 13 mm. and 1.90 metre above GL & 0.75 metre below GL including digging hole, repacking the same with cement concrete 1:3:6 with jhama khoa or with local stone chips etc. complete including painting two coats on both faces lettering sign marks etc. as per direction of the Engineer-in-Charge. (The rate is inclusive of cost of reinforcement, concrete, shuttering, nuts & bolts, washer etc. complete.) |
| 15 | Labour for boring tube well of required dia by water jet System through any type of soil strata including hire &labour charges for boringpipe , scaffolding , tools & plants as necessary and taking out them and lowering pipes ,strainers , blind pipe etc. & filling and fixing the same complete including bucket washing and otherincidental works in this connection .The Tube Well should have an maximum 50 mm. gap in between the out side of the tube well and the bore.A) For the depth upto 150 m. for 50 mm. dia Tube-well with top enlargement of 100 mm. dia.i) 50 mm dia boring. |
| 16 | ii)100mm dia boring etc.top enlargement |
| 17 | Supplying fitting and fixing in position G.I. pipes of TATA make for underground works with all necessary accessories,specials viz. socket,bend,tee, union,cross,elbow,nipple,short piece etc. including cost of all materials,jointing materials,cutting pipes,making threads,cutting trenches upto 1.5 m. below surface in all sorts of soil and reffiling the same as directed with two coats of painting on G.I. pipes and specials with bituminus paint complete in all respect.(payment will be made on the centre line measurement of the total pipe line including all specials no separate payment wiil be made for accessories,specials,payment for painting will be made separately) 50 mm. dia. |
| 18 | Supplying high density polythene stainer of approved make with adapter conforming to I.S. specification. 50 mm dia.a ) 50 mm dia |
| 19 | Supplying fitting and fixing in position PVC pipes of approved make ( SUPREME/ORIPLAST/LONGLAST) of (Medium duty) conforming to ASTMD -1785 and threaded to match with G.I. pipes as per IS1239 (part-I) with all necessary accessories,specials viz. socket,bend,tee, union,cross,elbow,nipple,short piece etc. including cost of all materials,jointing materials,cutting pipes,making threads,cutting trenches upto 1.5 m. below surface in all sorts of soil and reffiling the same as directed with two coats of painting on G.I. pipes and specials with bituminus paint complete in all respect.(payment will be made on the centre line measurement of the total pipe line including all specials. No separate payment wiil be made for accessories,specials.) .[Ref: Sanitary & Plumbing works ,P-14,i-19.iii.A].a ) 50 mm dia |
| 20 | ii) 100 mm.dia. |
| 21 | Supplying fitting and fixing in position G.I. pipes of TATA make for underground works with all necessary accessories,specials viz. socket,bend,tee, union,cross,elbow,nipple,short piece etc. including cost of all materials,jointing materials,cutting pipes,making threads,cutting trenches upto 1.5 m. below surface in all sorts of soil and reffiling the same as directed with two coats of painting on G.I. pipes and specials with bituminus paint complete in all respect.(payment will be made on the centre line measurement of the total pipe line including all specials no separate payment wiil be made for accessories,specials,payment for painting will be made separately)80 mm.dia. |
| 22 | Supplying, fitting and fixing GI cap at top. 100 mm.[Ref: Sanitary & Plumbing works ,P-51,i-17] |
| 23 | Supply of sub -mersible pump , Motor Horse power-2 HP, Motor Phase Single Phase , Head (Water Lifting Capacity ()15 to 50 m , Power Source AC Powered |
| 24 | Supply of Marshal Single Phase Control Panel |
| 25 | Supply of Armoured Cable (Havells , Gloster, Polycab, Mescab etc] |
| 26 | Supplying fitting & fixing steel cutter pieceupto 450 mm long with sockets. 50mm dia.[Ref: Sanitary & Plumbing works , i) 50 mm.dia |
| 27 | Supplying of 100mm x 50mm dia PVC reducing socket.[Ref: Sanitary & Plumbing works ,P-22,i-19(III).L] |
| 28 | Packing the annular space between the outside of the tubewell pepes and strainers and bore with pea size washed gravels of approved quality having size from 2 mm. to 5 mm. the size approved by E.I.C. including cost of materials Labours & equipment complete. |
| 29 | Supplying fitting and fixing in position PVC pipes of approved make ( SUPREME/ORIPLAST/LONGLAST) of (Medium duty) conforming to ASTMD -1785 and threaded to match with G.I. pipes as per IS1239 (part-I) with all necessary accessories,specials viz. socket,bend,tee, union,cross,elbow,nipple,short piece etc. including cost of all materials,jointing materials,cutting pipes,making threads,cutting trenches upto 1.5 m. below surface in all sorts of soil and reffiling the same as directed with two coats of painting on G.I. pipes and specials with bituminus paint complete in all respect.(payment will be made on the centre line measurement of the total pipe line including all specials. No separate payment wiil be made for accessories,specials.)32 mm dia pipe |
| 30 | 25 mm dia pipe |
| 31 | Supplying P.V.C. water storage tank of approved quality with closed top with lid (Black) - Multilayer, 2000 ltr |
| 32 | Chromium Plated Bib Cock or Stop Cock. |
| 33 | Sub Total |
| 34 | GST 18% |
| 35 | CESS 1% |
AI Tender Summary
Tender Timeline
Mar 06, 2023
11:30 IST
Tender Published
Tender notice published.
CompletedMar 14, 2023
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedMar 16, 2023
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender