Tender For Constructing Grampanchayat Office Building At Osade Tal Velhe Dist Pune
Tender Value
14.99 Lakhs
Estimated cost
Bid Submission
13 Mar 2023
0 days left
EMD
14999
Bank guarantee accepted
Document Fee
1180
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
velhe → Maharashtra
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Constructing Grampanchayat Office Building At Osade Tal Velhe Dist Pune
BOQ
| Sl. No. | Item Description |
| 1 | Item No.1) Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 m. beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.5 m.) P/I - 115/21.02 Item Spec (Bd.A.1 Page No.259) |
| 2 | Item No.2) Excavation for foundation in hard murum including removing the excavated material upto distance of 50 metres beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.50 m) By Mechanical Means. P/I - 115/21.06 Item Spec (Bd.A.2 Page No.259) |
| 3 | Item No.3) Excavation for foundation in soft rock andcement or limememasonary foundations including removing the excavated material upto distance of 50 meters beyond the building area and stacking and spreading as directed ,dewatering ,preparing the bed for the foundation and necessary back filling,ramming,watering including shoring and strutting etc. complete. (Lift upto 1.50 m) By Mechanical Means. P/I - 116/21.14 Item Spec (Bd.A.4 Page No.259) |
| 4 | Item No.4)Providing and laying Cast in situ/Ready Mix cement concrete in M-10 of trap/ granite/ quartzite/ gneiss metal for foundation and bedding including bailing out water, formwork, laying/ pumping, compacting, roughening them if special finish is to be provided, finishing if required and curing complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete.With natural sand/V.S.I. quality Artificial Sand.P/I - 131/24.01 Item Spec (Bd.E.1 Page No.287) (R.A) |
| 5 | Item No.5) Providing and laying in situ/Ready Mixcement concreteM-20of trap / granite /quartzite/ gneissmetal for R.C.C. workin foundations like raft, strip foundations, grillage andfootings of R.C.C. columns and steel stanchionsetc. including bailing out water, formwork, laying/pumpingcover blocks, compaction and curing roughening the surface if special finish is to be provided (Excluding reinforcement and structural steel) etc. complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggegate (Crushed sand V.S.I. Grade) P/I - 133/25.11 (R.A) |
| 6 | Item No.6) Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap / granite /quartzite/ gneiss metal for R.C.C. columns as per detailed designs and drawing or as directed including centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggegate (Crushed sand V.S.I. Grade) P/I - 134/25.31 (R.A) |
| 7 | Item No 7) Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap / granite /quartzite/ gneiss metal for R.C.C. beams and lintels as per detailed designs and drawings or as directed including centering, formwork, cover blocks, laying/pumping, compactionand roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With crushed sand V.S.I. grade. P/I - 135/25.50 (R A) |
| 8 | Item No.8) Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap/ granite/ quartzite/ gneiss metal for R.C.C.slabs and landingsas per detailed designs and drawings including centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc complete, (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V.S.I. quality Artificial Sand. P/I - 135/25.70 (R.A) |
| 9 | Item No.9) Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap/ granite/ quartzite/ gneiss metal for R.C.C. chajja as per detailed design and drawings including centering, formwork, cover blocks compacting , curing , finishing and roughening the surface if special finish is to be provided and curing complete. (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With creush sand V.S.I.grade. P/I - 137/26.05 (R A) |
| 10 | Item No. 10) Providing and fixing in position TMT - FE - 500 bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete. P/I - 245/26.33(R.A) |
| 11 | Item No.11)Providing second class Burnt Brick masonry with conventional/ I.S. type bricks in cement mortar 1:6 in foundations and plinth of inner walls/ in plinth external walls including bailing out water manually,striking joints on unexposed faces, raking out joints on exposed faces and watering etc. Complete.P/I -144/27.01 (R.A) |
| 12 | Item No.12) Filling in plinth and floors withapprovedexcavated material in 15cm. to 20cm. layers including watering and compacting etc. complete. P/I - 117/21.36 |
| 13 | Item No.13)Filling in plinth and floors with contractors material/brought from outside and approved by Engineer incharge in layers of 15 cm to 20 cm including watering and compaction etc. complete.P/I -117/21.37 |
| 14 | Item No.14)Providing second class Burnt Brick masonry with conventional/ I.S. type bricks in cement mortar 1:6 in superstructure including striking joints, raking out joints, watering and scaffolding etc. Complete.P/I -144/27.05 (R.A) |
| 15 | Item No.15) Providing secondclassBurntBrickmasonrywithconventional/I.S.typebricksincement mortar 1:4 in half brick thick wall including mild steel longitudinal reinforcement of 2 bars of 6mm diameter / 2 hoop ironstrips25mm X1.6mm placed at every third course, properly bent andbondedatendsscaffolding, racking out joints and watering etc. complete. P/I -144/27.06 (R.A) |
| 16 | Item No. 16)Providing internal cement plaster 6mm thick in single coat in cement mortar 1:4 without neeru finish to concrete or brick surfaces, in all positions including scaffolding and curing etc. complete. P/I - 153/32.01(R.A) |
| 17 | Item No. 17)Providing internal cement plaster 12mm thick in single coat in cement mortar 1:4 with neeru finish to concrete or brick surfaces, in all positions including scaffolding and curing etc. complete. P/I - 153/32.04(R.A) |
| 18 | Item No. 18) Providing sand faced plaster externally in cement mortar using approved screened sand, in all positions including base coat of 15mm thick in cement mortar 1:4 using water proofing compound at 1Kilogram per cement bag curing the same for not less than 2 days and keeping the surface of the base coat rough to receive the sand faced treatment 6 to 8mm thick in cement mortar 1:4 finishing the surface by taking out grains and curing for fourteen days scaffolding etc.complete. P/I -153/32.11(R.A) |
| 19 | Item No. 19)Providing neeru finish to plastered surfaces in all positions including scaffolding and curing etc. complet P/I - 153/32.15 |
| 20 | Item No.20) Providing and laying Polished Tandur Stone flooring 25mm to 30mm thick required width in plain/ diamond pattern on a bed of 1:6 C.M. including cement float, filling joints with neat cement slurry, curing, polishing and cleaning etc. complete.P/I - 156/33.05 (R A) |
| 21 | Item No.21) Providing and laying machine cut machine polished machine cut Kota stone slabs 20 to 25mm thick for treads and risers of steps and staircases, with rounded nosing for the treads on a bed of 1:4 cement mortar including cement float, filling joints with neat cement slurry, curing, polishing and cleaning etc. complete.P/I - 157/33.18 (R A) |
| 22 | Item No.22) Providing and laying ceramic tiles ofhaving size 30 cm. x 30 cm. confirming I.S. 15622/2006 (group DII-A)and 7 to 8mm thick for flooring in required position laid on a bed of 1:4 cement mortar including cement float, joint filling with white/ colour cement slurry cleaning curing etc. complete. P/I - 158/33.24 (R A) |
| 23 | Item No.23) Providing and laying Antiskid Ceramic tiles of approved qualityof size 30 cm x 30 cm and confirming to IS 15622-2006 (Group-B IIA) for antiskid flooring in required position laid on a bed of 1:4 cement mortar including cement float, filling joint with cement slurry cleaning curing etc. complete. P/I - 161/33.67(R A) |
| 24 | Item No.24) Providing and laying ceramic tiles ofhaving size 30 cm. x 30 cm. and confirming to corresponding I.S. for dado and skirting in required position with readymade adhesive mortar of approved quality on plaster of 1:2 cement mortar including joint filling with white/ colour cement slurry cleaning curing etc. complete. P/I - 158/33.25 (R A) |
| 25 | Item No.25) Providing and laying vitrified mirror / glossy finish tiles decorative typehaving size 590 mm to 605 mm x 590 mm to 605 mm of 8 to 10 mm thickness and confirming to IS. 15622-2006 ( group Bla) of approved make, shade and pattern for flooring in required position laid on a bed of 1:4 cement mortar including neat cement float, filling joints, curing and clearingetc. complete.P/I - 159/33.40(R A) |
| 26 | Item No.26) Providing and laying vitrified mirror / glossy finish tiles decorative typehaving size 590 mm to 605 mm x 590 mm to 605 mm of 8 to 10 mm thickness and confirming to IS. 15622-2006 ( group Bla) of approved make, shade and pattern for dado and skirting in required position laid on a bed of 1:4 cement mortar including neat cement float, filling joints, curing and clearingetc. complete.P/I - 159/33.41(R A) |
| 27 | Item No.27) Providing and laying chequered tiles of approved quality of size 30cm x 30cm, confirming to corresponding I.S. for flooring in required position laid on a bed of 1:4 cement mortar including cement float, filling joint with cement slurry cleaning curing etc. complete.P/I - 161/33.66(R A) |
| 28 | Item No.28) Providing and fixing green marble of 18 to 20 mm thick for door frame/ dado/ window boxing etc. On C.M. 1:6 including filling joints with polymer base filler nosing / moulding the sharp edges wherever necessary, curing, etc. complete P/I - 160/33.48 |
| 29 | Item No.29) Providing and fixing solid core flush door shutter in single leaf 32 mm thick decorative type of exterior grade as per detailed drawings approved face veneers 3 mm thick on both faces or as directed, all necessary beads, mouldings and lipping, wrought iron hold fasts, chromium plated fixtures and fastenings, with brass mortise lock, chromium plated handles on both sides, and finishing with French Polish etc. complete. P/I - 179/39.09 |
| 30 | Item No.30 ) Providing and fixing in position. (as per I.S.1868 / 1982) Aluminium sliding window of two tracks with rectangular pipe having overall dimension 63.50 x 38.10 x 1.02 mm at weight 0.547 Kilogram/ Running metre. and window frame bottom track section 61.85 x 31.75 x 1.20 mm at weight 0.695 Kilogram/Running metre. Top and side track section 61.85 x 31.75 x 1.30 mm at weight 0.659 Kilogram/ Running metre. The shutter should be of bearing bottom 40 x 18 x 1.25 mm at weight 0.417 Kilogram/ Running metre. Inter locking section 40 x 18 x 1.10 mm at weight 0.469 Kilogram/Running metre. And handle section 40 x 18 x 1.25 mm at weight 0.417 Kilogram/Running metre. and top section 40 x 18 x 1.25 mm at weight 0.417 Kilogram/ Running metre. As per detailed drawings and as directed by Engineer in charge with all necessary Aluminium sections fixtures and fastenings such as roller bearing in nylon casting and self locking catch fitted in vertical section of shutter including 5 mm thick plain glass with all required screws and nuts etc, complete. With powder coating without box P/I - 184/39.40 |
| 31 | Item No.31) Providing and fixing cold rolled steel hollow door frame 105mm x 60mm for anysizes including hold fast hinges, tie members with red oxide and gray paint etc. complete as per I.S.I. specifications and code of practice prescribed including anticorrosive treatment as directed by the engineer P/I-186/39.49 |
| 32 | Item No.32) Providing andfixing in position powder coated aluminium louvered windows / ventilator of various sizes with powder coating as per detailed drawing and specifications including aluminium frames 80 x 38mm xmm box type, 5mm thick sheetglass louvers, of approved quality etc complete. P/I- 188/39.68 |
| 33 | Item No.33) Providing and fixing mild steel grill work for windows, ventilators, etc. 15 kg/sqm as per drawing including fixtures necessary welding and painting with one coat of anticorrosive paint and two coats of oil painting complete. P/I - 192/40.02 |
| 34 | Item No. 34) Providing and fixing 15mm dia screw down bib/ stop tap of brass including necessary socket union nut complete. P/I-196 /41.40 |
| 35 | Item No. 35)Providing and fixing coloured glazed earthenware Wash Hand Basin of 45cm x 30cm size including cold water pillar tap/cold and hot water pillar tap brackets, rubber plugs and brass chain,stop tap andnecessary pipe connection including P.V.C.waste pipe and trap up to the outside face of the wall, making good the damaged surface testing etc complete. P/I-199/41.67 |
| 36 | Item No.36)Providing and constructing Brick Masonry Inspection Chamber 60cm x 45cm x 90cm including 1:4:8 cement concrete foundation 1:2:4 cement concrete channels half round G.S.W. pipes, Brick Masonry, plastering from inside and with frame fixed in cement concrete with R.C.C. Cover medium duty 140 kg with frame etc complete. P/I-200 / 42.12 |
| 37 | Item No. 37) Providing and fixing hume pipe septic tank 900mm diameter with vent pipe and cap including necessary (including excavation and laying) P/I-201/42.18 |
| 38 | Item No. 38)Providing soak pit of size 120cm x 120cm x 120cm including excavating and filling with brick-bats. P/I-201/42.19 |
| 39 | Item No.39) Providing and fixing 450mm x 550mm size superior type Belgium mirror with 16mm dia. Nickel plated towel rod etc. complete. P/I-201/42.20 |
| 40 | Item No. 40) Providing, laying and fixing P.V.C. pipe of 110mm. dia. with fittings such as bends, tees, reducers, clamps, etc. including necessary excavation, trench filling etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. P/I-202/ 42.28 |
| 41 | Item No. 41)Providing and fixing Orissa type white glazed earthenware 575 mm water closet pan including S trap with earthenware foot rests, cast iron soil and vent pipe upto outside face of the wall 1:2:4 brick bat lime concrete bedding without flushing tank and its accessories etc. complete. P/I-202/42.30 |
| 42 | Item No. 42)Providing and fixing chromium plated towel rod 16mm dia and 75cm. In length including all accessories complete. P/I-202/42.31 |
| 43 | Item No. 43)Providing and fixing H.D.P container one piece moulded water tank made out of high density polythyler and built corrugated inclusive of deliveryuptodestinationhoistingand fixing of accessories such as inlet,outlet overflow pipe inclusive of all tanks capacity between 200 to 1000 liters. P/I-204/42.53 |
| 44 | Item No. 44) Providing and laying in trenches 15mm dai. CPVC pipe including necessary excavation, fittings. Refilling trenches etc. complete Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. P/I-205/ 42.61 |
| 45 | Item No. 45) Providing and laying in trenches 25mm dai. CPVC pipe including necessary excavation, fittings. Refilling trenches etc. complete Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. P/I-205/ 42.63 |
| 46 | Item No.46) Providing and fixing 10 cm PVC nahani trap with grating etc. complete. P/I-205/42.67 |
| 47 | Item No.47) Providing and applying two coats of exterior weather shield paint of approved manufacture and of approved colour to the plastered surfaces including cleaning, preparing the plaster surface, applying primer coat, scaffolding if necessary, and watering the surface for two days etc complete. P/I - 165/35.26 |
| 48 | Item No.48) Providing and applying washable oil-bound distemper of approved colour and shade to old and new surfaces in two coats including scaffolding, preparing the surfaces. (including the primer coat.) etc. complete.P / I :- 167/36.11+165/35.21 (R.A) |
| 49 | Item No. 49) Providing and fixing board displaying information, such as \"Name of work, Tender cost, Name of Contractor, Work completion and liability period etc\", having rectangular shape of 1.20m x 0.90m size made out 18 gauge (1.25mm) thick mild steel sheet painted with one coat of Zinc chromate stoving primer and two coats of enamel paint on front side and grey stove enamel on back side and border / messages / symbols etc. with approved colour shade paint complete, on M.S.angle of size 35 x 35 x 3 mm frame with properly cross braced M.S. angles of size 35mm x35mm x3mm duly painted including Two M.S. angle iron posts of size 65 mm x 65mm x 6 mm, 3.65 m long painted with alternate black and white bands of 25 cm width including all fixtures etc.and fixing the boards in 1:4:8 concrete block of size 60 cm x 60 cm x 75 cm including, excavation, refilling, transportation, and labour etc complete. Spec. No. As directed by Engineer in ChargeP/I - 47/6.36 |
| 50 | Item No. 50) Amount of material testing charges of Bricks - Water Absorption (Set of 5 Bricks), Compressive Strength( Set of 5 Bricks), Efflorescence(Set of 5 Bricks). |
| 51 | Item No. 51) Amount of material testing charges of Concrete - Compressive strength. |
| 52 | Item No. 52) Amount of material testing charges of Mortor - Compressive strength. |
| 53 | Item No. 53) Amount of material testing charges of Steel Reinforcement - Up to 16mm |
| 54 | Item No.54) Royalty charges for Hard murum. Rate = Royalty + Surcharge (2%) = 211.95+4.23 = 216.18/Cum |
| 55 | GST Charges 12% (On Work Portion) |
| 56 | Insurance 1% (On Work Portion & Royalty & testing Estimates) |
AI Tender Summary
Tender Timeline
Mar 06, 2023
11:30 IST
Tender Published
Tender notice published.
CompletedMar 13, 2023
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedMar 15, 2023
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender