|
| 1 | Excavation in foundation in ordinary soil (loam clay or sand) including lift upto 1.5m & lead upto 30m including filling watering & ramming of excavated earth into the trenches or into the space between the building & the sides of foundation trenches or in to the plinth removal & disposal of surplus earth as directed by engineer in charge upto a distance of 30m from the foundation trenches |
| 2 | Concrete with 4cn gauge brick ballast, fine sand of 1.25 fineness modulous and cement in propotion of 12:6:1 in foundation and under floor, including supply of all materials, labour and T&P etc. required for proper completion of work |
| 3 | M150 class brick work in 1:4 cement and and coarse sand mortar in foundation and plinth including supply of all materials, labour and T&P etc. required for proper completion of work |
| 4 | RCC work with cement, approved coarse sand & 2cm gauge approved stone grit in proportion of 1:2:4 in lintals of doors and windows exvluding supply of reinforcement and its binding but including its fixing and binding the same with 24 B.W.G.G.I. binding wire and including necessary centering and shuttering etc. and also including supply of all materials, labour and T&P etc. required for proper completion of work |
| 5 | RCC work with cement, approved coarse sand & 2cm gauge approved stone grit in proportion of 1:2:4 in lintals of doors and windows exvluding supply of reinforcement and its binding but including its fixing and binding the same with 24 B.W.G.G.I. binding wire and including necessary centering and shuttering etc. and also including supply of all materials, labour and T&P etc. required for proper completion of work |
| 6 | M150 class brick work in 1:4 cement and and coarse sand mortar in Super structure including supply of all materials, labour and T&P etc. required for proper completion of work |
| 7 | Mild steel or iron in plain work such as reinforced concrete or reinforced brick work (when not included in an over all rates) wrought to required shape as necessary including bending for proper completion of the work and including supply of all steel and wastage and over lapping & hooks. |
| 8 | 12mm thick plaster with cement mortar in proportion of 1:4 cement and coarse sand of 2.25FM over brick work minimum thickness not be less than 10mm including supply of all materials, labour & T&P etc. required for proper completion of work |
| 9 | 12mm cement plaster finished with a floating coat of cement of mix 1:3 |
| 10 | 40mm thick c.c flooringin 1:2:4 |
| 11 | S & F 6mm china white glazed tiles in flooring or scerting dado laid with 1:3 cement and approved coarse sand mortar finished white cement slurry jointing and polishing complete including supply of all materials, labour and T&P etc. required for proper completion of work |
| 12 | Providing and applying white cement based putty of average thickness1 mm, of approved brand and manufacturer, over the plastered wallsurface to prepare the surface even and smooth complete. |
| 13 | Distemper Two coat with oil bound distemper of approved brand manufacturer and required shade |
| 14 | Painting two coat over priming coat( but excluding cost of priming coat) on wood or steel and other metal surface with superior synthetic enamel standard make brushing to give an even shade and finish and including cleaning the surface of all dirt dust and other foreign matter sand papering and stripping including cost of all material labour T&P etc required for the proper completion of the work (As per SI No-2+3(iii)) |
| 15 | Supply & fixing of flush doors commercial quality conforming to IS 2202 part 1 (1983) including fixing of wooden cleats and stoppers and including fixing and adjustment to hinges bolts locks handles springs fitting with necessary screw to be supplied departmently |
| 16 | Mild steel or iron work of small size and sections such as holding down bolts, hold fast,tie rod , grating etc(when not included in an over all rates) wrought to required form including of supply of steel, boalts nuts and wastage etc. and there fixing requiredfor proper completion of work. |
| 17 | Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: |
| 18 | Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required :17.2.1 W.C. pan with ISI marked white solid plastic seat and lid |
| 19 | Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm or40x410x265 mm sizes respectively. |
| 20 | Providing and fixing white vitreous china wash basin including making all connections but excluding the cost of fittings :17.25.1 Flat back wash basin of size 630x450 mm |
| 21 | Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws andashers complete. |
| 22 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. |
| 23 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. |
| 24 | Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 :18.49.1 15 mm nominal bore |
| 25 | Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:893118.53.1 15mm nominal bore |
| 26 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge.Concealed work, including cutting chases and making good the walls etc.18.8.1 15 mm nominal dia Pipes |
| 27 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge.Concealed work, including cutting chases and making good the walls etc18.8.2 20 mm nominal dia Pipes |
| 28 | Electrification work as per annexure |
| 29 | Misc. Work Not cover under above schedule but necessary for completion of work |
| 30 | Supplying & Fixing sign board at site |
