Tender For Augmentation Of Various Tube Wells By Replacement Of Damaged Items At Various Tube Wells / Sector In R.K. Puram Ac-44, Delhi-Delhi

Augmentation Of Various Tube Wells By Replacement Of Damaged Items At Various Tube Wells / Sector In R.K. Puram Ac-44. , Augmentation Of Various Tube Wells In R.K Puramby Carried Out Following Works. 1.Sec-04 Bps 2. Sec-06 Near H.No-619 3. Sec-07 Asha Dispensary-Ii, Gas Agency 4. Sec-07 Malaimandir Old. Supplyof Out Door Type 7.5 To 10Hp Hut Type Electrical Feeder Pillar / Metal Board Of Welded Construction Of Size 1370Mm X 760Mm X 460Mm Fabricated With 16 Swg M.S. Sheet With Horizontal And Vertical Intermediate Chamber Of Suitable Size On Suitable Size Insulating Board To Make The Panel Robust, Having Double Door With 14 Swg S.S Hinges Along With Double Locking Arrangement With Arrangement For Mounting Of Switch Gear And Electrical Energy Meter I / C Powder Coating, Vermin Proof Having Following Items. 1. Mccb 63 Amp, 4 Pole-1 No 2. Rccb / Elcb 63 Amp, 4 Pole With Earth Fault Indicator And Positive Contact Indication Protecting A Circuit Automatically 1No 3. Fully Automatic Star Delta Starter Of 10Hp, 3Phase Oil Immersed Type 1No 4. Digital Ampere Meter 96Mmx96mm Square Shape Of 0-30 Amp Range 1No 5. Digital Voltmeter Of 96Mm X 96 Mm Square Shape Of 0-500 Volt Range With Selector Switch 1No 6. Led Indicating Lamps With Fitting ( A Set Of 3 Lamps ) 1Set 7. Shunt Capacitor Of 5 Kvar With Three Phase Isolator 1No 8. Motor Protection Assembly Having Earth Leakage Protection, Phase Sequence Corrector, Single Phasing Protection, Over Load Protection, High Voltage-Low Voltage Protection. 1No 9. Programmable Time Switch ( I.E. Ryb Phase & Facility To Change Over From Automatic To Manual & Vice Versa ) Up To 10 H.P.1No 10. Complete Wiring Of Panel Board & Installation Of Electrical Accessories In The Panel With Required Copper Conductor Wire &Thimbling Etc.As Required. The Panel Board Shall Be Mounted On The Base Frame Of 600Mm Height Made Of 50X50x6mm Angle Iron Frame. Make:-All The Insert Used In Panel Must Be Of Djb Approved Makes And Should Be Isi Marked Where Make Of That Equipment Is Not Approved. Djb Item Code 10.2.1 , Supplyof Double Flange Gi Column Pipe 50 Mm Dia Medium Class Each Of 3 Mtrs Long Duly Threaded On Both Ends, Welded Fitted With Gi Flange On Both Ends And Welded Support L-Type Ms Bracket In Both Flange With Slot Of Submersible Cable. Make: Tata / Jindal. , Supplyofpvc Insulated Pvc Sheathed Copper Conductor Flat Cable Size 3 Core X 4Sq Mm, 1100 Volts, Confirming To Is 694 ( Each Roll 100Mtr Long ) . Make: Finolex / Havells. / Kei / Any Djb Approved Make. , Supply Of Nut Bolts, Washer 1 / 2 “Dia 1 ½” Long Full Threaded. , Augmentation Of Various Tube Wells By Dismantling Of Pipes And Other Allied Mechanical Equipment By Opening / Cutting Of Nut And Bolts As Required , Opening And Re-Jointing Of Cables And Replacing The Required Components Etc. By Using Above Materials. Testing And Commissioning Of Each Tube Wells As Per Site Requirement. The Work Including All Arrangement Of Man Power And It Also Includes Tools And Tackles Such As Tripod. Chain Pulley Pipe Wrench Etc. And Remodeling The Damages Up To Standard If Occurred Any.

INR 500 /-

INR 7000.0 /-

Refer document

Name of Work: Augmentation of various tube wells by replacement of damaged items at various tube wells / sector in R.K. Puram AC-44.

Sl. No.	Item Description
1	Augmentation of various tube wells in R.K Puramby carried out following works. 1.Sec-04 BPS 2. Sec-06 Near H.No-619 3. Sec-07 Asha Dispensary-II, Gas Agency 4. Sec-07 MalaiMandir old. Supplyof OUT DOOR TYPE 7.5 TO 10HP Hut type electrical feeder pillar/metal board of welded construction of size 1370mm x 760mm x 460mm fabricated with 16 SWG M.S. sheet with horizontal and vertical intermediate chamber of suitable size on suitable size insulating board to make the Panel Robust, having double door with 14 SWG S.S hinges along with double locking arrangement with arrangement for mounting of switch gear and electrical energy meter i/c powder coating, Vermin proof having following items. 1. MCCB 63 Amp, 4 Pole-1 No 2. RCCB/ELCB 63 Amp, 4 Pole with earth fault indicator and positive contact indication protecting a circuit automatically 1No 3. Fully automatic star delta starter of 10HP, 3Phase oil immersed type 1No 4. Digital Ampere meter 96mmx96mm square shape of 0-30 Amp range 1No 5. Digital Voltmeter of 96mm x 96 mm square shape of 0-500 volt range with selector switch 1No 6. LED Indicating lamps with fitting (a set of 3 lamps) 1Set 7. Shunt capacitor of 5 KVAR with three phase isolator 1No 8. Motor Protection Assembly having Earth Leakage protection, Phase sequence corrector, Single phasing protection, Over load protection, High voltage-low voltage protection. 1No 9. Programmable time switch (i.e. RYB Phase & facility to change over from automatic to manual & vice versa) up to 10 H.P.1No 10. Complete wiring of panel board & installation of electrical accessories in the panel with required copper conductor wire &thimbling etc.as required. The panel board shall be mounted on the base frame of 600mm height made of 50x50x6mm angle iron frame. Make:-All the insert used in Panel must be of DJB approved makes and should be ISI marked where make of that equipment is not approved. DJB Item CODE 10.2.1
2	Supplyof Double flange GI Column pipe 50 mm dia medium class each of 3 mtrs long duly threaded on both ends, welded fitted with GI flange on both ends and welded support L-type MS bracket in both flange with slot of submersible cable. Make: TATA/ Jindal.
3	SupplyofPVC insulated PVC sheathed copper conductor flat cable size 3 core X 4sq mm,1100 volts, confirming to IS 694(each roll 100mtr long). Make: Finolex / Havells./KEI/Any DJB approved make.
4	Supply of nut bolts, washer 1/2 “dia 1 ½” long full threaded.
5	Augmentation of various tube wells by dismantling of pipes and other allied mechanical equipment by opening/cutting of nut and bolts as required ,opening and re-jointing of cables and replacing the required components etc. by using above materials. Testing and commissioning of each tube wells as per site requirement. The work including all arrangement of man power and it also includes tools and tackles such as tripod. Chain pulley pipe wrench etc. and remodeling the damages up to standard if occurred any.