|
| 1 | S/W No. 1 - Plastic Processing Unit |
| 2 | Excavation for foundation / pipe trenches in hard murum including removing the excavated material up to a distance of 50 M and lifts as below, stacking and spreading as directed by Engineer-in-charge, normal dewatering, preparing the bed for foundation and excluding backfilling, etc. complete. |
| 3 | Providing and laying in situ Cement Concrete M-15 of trap/ granite / quartzite gneiss metal for foundation and bedding including bailing out water, form work, compaction, curing, etc. complete. |
| 4 | Providing un coursed rubble masonry of trap/granite / quartzite/ gneiss stone since cement mortar 1:6 insuperstructure including racking out joints when plastering is to be done/striking joints when no plastering is to be done on inside watering and scaffolding etc. complete. |
| 5 | Filling in plinth and floors / trenches with contractor\"s murum for bedding in 15 cm to 20 cm layers including watering and compaction, etc. complete. |
| 6 | Providing second class Burnt Brick masonry with conventional /I.S. type bricks in cement mortar 1:6 in superstructure including striking joints, raking out joints. watering and scaffolding etc. Complete |
| 7 | Providing structural steel work in single stanchions composed of RSJ. channel, etc. with caps, bases, mild steel plates, angles, brackets, cleats, gusset plates, anchor bolts, etc. as per detailed design and drawing or as directed by 77018.70 Engineer in charge including cutting, fabrication, hoisting, erecting, fixing in position, making riveted bolted/ welded connections and one coat of anticorrosive paint and over it two coats of oil painting, etc. complete. |
| 8 | Providing and fixing crimped with GI mesh and size 20mm x20mm 10 guage to iron angle frame including welding crimp mesh to angle frame and steel flat, fixing the frame in its original position and oil painting etc complete (excluding cost of structural steel) |
| 9 | Providing and fixing corrugated galvanised iron sheets of 0.80 mm thick (22 BWG) for roofing without wind tiles including fastening with galvanised iron screws and bolts, lead and bitumen washers as per drawing etc complete (Weight of 6.8 Kilogram/sq m.) |
| 10 | Providing and fixing MS gate 2.5 M wide for compound with 40 mm dia G.I. pipe, approved grill work, RCC M-150 side pillars of 25 cm x 40 cm x 2.5 M height, its foundation, finishing, painting, etc. complete |
| 11 | Providing sand faced plaster in cement mortar using approved screened sand, in all positions including base coat of 15mm thick in cement mortar1:4 using water proofing compound at 1 Kilogram per cement bag curing the same for not less than 2 day sand keeping the surface of the base coat rough to receive the sand faced treatment 6 to 8 mm thick in cement mortar 1: 4 finishing the surface by taking out grains and curing for fourteen days scaffolding etc. complete. |
| 12 | Providing and laying Rough Shahabad Stone Flooring 25 mm to 30 mm thick and of required widthin plain /diamond pattern on a bed of 1:6 C.M. including cement float striking joints pointing in cement mortar1:3curing and cleaning etc, complete |
| 13 | Providing and applying white-wash in one coat on old/ new plastered or masonry surfaces and asbestos cement sheets including scaffolding and preparing the surface by brushing and booming down etc. complete |
| 14 | Providing and applying pearl finish paint of approved color and shade to the existing plaster surface including scaffolding, preparing the surface, applying the acrylic wall putty etc. complete |
| 15 | S/W No. 2 - Machinary |
| 16 | Gross Cost of Machinary as per Quotation attached (Excluding GST) |
