Tender For Digital Indicator With Transmitter., bangalore-Karnataka

Supply Of Digital Indicator With Transmitter Spcefication As Below: 1. Auxillary Input Supply : 230 Vac, + / - 15%, 50 / 60Hz. 2. Input Signal : Disposable Thermocouple K, R, S And B Type. ( Factory Set Stype T / C ) . 3. Design : Microprocessor / Microcontroller Based Design. 4. Application : Temperature Measurement For Molten Metal Through Disposable Thermocuple. 5. Range : Full Positive Range Of The Selected Input, S Type :0 To 1768 Degree C. 6. Accuracy : Within + / - 0.1% Of The Range, Including Cold Junction Compensation. 7. Resolution : 1 Degree C / 1 Degree F ( Factory Set To Degree C ) . 8. Cold Junction Compensation : Automatic, Built In Sensor From 10 Degree C To 60 Degree C. 9. Display : 4 Digit, Height: 2 Inch & Seven Segment Red Led Display. 10. Measurement Time : 2 To 9 Seconds ( User Programmable ) . 11. Plateau Detection : 0.1 To 99 Degree C ( User Programmable ) . 12. Indication : Led / Pilot Lamp At Front Panel For Various Functions. 13. Audio / Visual Indications : For Thermocouple Continuity, Measurement In Progress And Measurement Completed Using The Built In Indicator And Hooter. 14. Retransmission Output : 4-20Ma ( Analogue, Scalable ) Proportional To The Measured Temperature, Load Resistance Max 600 Ohms. 15. Relay Output : Four Relays - 1 C / O, Potential Free Contacts For Driving Remote Audio & Visual Indicator. Relay Contacts Are Rated For 5A @ 230 Vac. 16. Data Storage : Readings Of Measurements Are Stored In The Memory, Which Can Be Retrieved On Demand At Instrument And Computer. 17. Communication / Interfacing : Serial Communication Rs 485 - 2 Wire For Remote Display & Computer Interface Through Usb. Required Software To Be Supplied Along With The Equipment. 18. Communication Port : Ethernet - Rj45, ( Rj45 Port Shall Be Provided Within The Equipment ) . 19. Operating Condition : Ambient Temperature Up To 50 Degree C, Steel Foundry & Dust Environment. 20. Enclosure : Fabricated With Sheet Metal ( Crca ) Sheet, Min Thickness Of 18 / 20 Swg, Single Door With Locking, Dust Free Refer To Ip 51 Class. For Portablity One Handle To Be Provided On The Top Of The Instrument. 21. Painting : Metalic Powder Coated, Gray Color. 22.Size : 340 ( W ) X 300 ( H ) X 200 ( D ) Mm + / - 25 Mm. 23. Mounting : Wall Mounting Key Holes And Can Be Placed On A Flat Platform. 24. Reputed Manufacturer / Supplier Details: I ) Make: Libratherm, Mumbai, Model : Lmi-2010-Pnl.Ii ) Make: Heaeus, Model: Digitemp-E, Electro-Nite. Iii ) Make: Sidermes, Model: Sidertemp-Iii. 25. Warranty For One Year From Date Of Commisioning & Acceptance. 26. Installation: Equipment Shall Be Supplied And Commissioned At Rwf. Note: Equipment Shall Have Provision For User Calibration Facility At Site & Calibration Certificate Shall Be Supplied, * Only Reputed Manufacturer Or Authorised Dealer To Quote. *Payment Will Be Made After Commissioning & Conformation Of Equipment Working At Site As Per The User Requirement. [ Warranty Period: 12 Months After The Date Of Delivery ] => Limited

Refer document

Refer document

Refer document

Sl. No.	Item Description
1	Digital Indicator With Transmitter.
2	Digital Indicator with Transmitter spcefication as below: 1. Auxillary Input Supply : 230 VAC, +/- 15%, 50/60Hz. 2. Input Signal : Disposable thermocouple K,R,S and B type.(Factory set Stype T/C). 3. Design : Microprocessor/Microcontroller based design. 4. Application : Temperature measurement for Molten Metal through disposable thermocuple. 5. Range : Full positive range of the selected input, S type :0 to 1768 degree C. 6. Accuracy : Within +/- 0.1% of the range, including cold junction compensation. 7. Resolution : 1 degree C / 1 degree F (Factory set to degree C). 8. Cold junction compensation : Automatic, built in sensor from 10 degree C to 60 degree C. 9. Display : 4 Digit, Height: 2 inch & Seven segment Red LED Display. 10. Measurement Time : 2 to 9 seconds(user programmable). 11. Plateau Detection : 0.1 to 99 degree C (user programmable). 12. Indication : LED/Pilot Lamp at front panel for various functions. 13. Audio/Visual Indications : For Thermocouple continuity, Measurement in progress and Measurement completed using the built in Indicator and hooter. 14. Retransmission Output : 4-20mA (Analogue, Scalable) proportional to the measured temperature, Load Resistance max 600 ohms. 15. Relay output : Four Relays - 1 C/O, Potential free contacts for driving remote audio & visual indicator. Relay contacts are rated for 5A @ 230 VAC. 16. Data storage : Readings of measurements are stored in the memory, which can be retrieved on demand at Instrument and Computer. 17. Communication/Interfacing : Serial communication RS 485 - 2 wire for remote display & computer interface through USB. Required software to be supplied along with the equipment. 18. Communication port : Ethernet - RJ45, (RJ45 port shall be provided within the equipment). 19. Operating Condition : Ambient temperature up to 50 degree C, Steel foundry & dust environment. 20. Enclosure : Fabricated with Sheet Metal (CRCA) sheet, Min thickness of 18/20 SWG, Single door with Locking, Dust free refer to IP 51 class. For portablity one handle to be provided on the top of the Instrument. 21. Painting : Metalic powder coated, Gray color. 22.Size : 340(W) x 300(H) x 200(D) mm +/- 25 mm. 23. Mounting : Wall mounting key holes and can be placed on a flat platform. 24. Reputed manufacturer/supplier details: i) Make: LIBRATHERM, Mumbai, Model : LMI-2010-PNL.ii) Make: Heaeus, Model: Digitemp-E, Electro-Nite. iii) Make: Sidermes, Model: Sidertemp-III. 25. Warranty for one year from date of commisioning & acceptance. 26. Installation: Equipment shall be supplied and commissioned at RWF. Note: Equipment shall have provision for user calibration facility at site & calibration certificate shall be supplied, * Only Reputed manufacturer or authorised dealer to quote. *Payment will be made after commissioning & conformation of equipment working at site as per the user requirement. [ Warranty Period: 12 Months after the date of delivery ]