Tender For Construction Of Dining Hall Including An Open Shed For Cooking And Sitting Arrangement At Sabroom Boys H.S School During The Year 2022-23 S.H. Earth Work, Rcc Work, Gsi Sheet Roofing, Finishing Work Etc. (2Nd Call)
Tender Value
12.37 Lakhs
Estimated cost
Bid Submission
20 Mar 2023
0 days left
EMD
24746
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
sabroom → Tripura
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Construction Of Dining Hall Including An Open Shed For Cooking And Sitting Arrangement At Sabroom Boys H.S School During The Year 2022-23 S.H. Earth Work, Rcc Work, Gsi Sheet Roofing, Finishing Work Etc. ( 2Nd Call )
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in surface excavation not exceeding 30 cm in depth but exceeding 1.5 m in width as well as 10 sqm on plan including disposal of excavated earth upto 50 m and lift upto 1.5 m, disposed soil to be levelled and neatly dressed:-All kinds of soil2.7.1 By manual means |
| 2 | Earth work in excavation by mechanical means (Hydraulicexcavator) / manual means in foundation trenches ordrains (not exceeding 1.5 m in width or 10 sqm on plan)including dressing of sides and ramming of bottoms, liftupto 1.5 m, including getting out the excavated soil anddisposal of surplus excavated soil as directed, within a leadof 50 m.-All kinds of soil |
| 3 | Supplying and filling in plinth, under floor, foundations etc. with sand (fine) from local quarry with all lifts including spreading in horizontal layers, watering, grading to required slope, ramming, consolidating and compacting each layer by using plate compactor or by any suitable method complete. |
| 4 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. -All kinds of soil |
| 5 | Providing and laying cement concrete in retaining walls, return walls (any thick-ness) including attached pilasters, columns, piers, abutmets, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping bed blocks, anchor blocks, plain window sills, fillets, sunken floor etc. upto floor five level, excluding the cost of centring shuttering and finishing - a) 1:3:6 ( 1 Cement: 3 fine sand : 6 graded well burnt brick aggregate 40 mm nominal size) |
| 6 | Centering shuttering including struttings, propping etc. and removal of form work for:a) Foundations, footings, bases for columns etc. for mass concrete with steel formwork |
| 7 | Providing and laying in position specified grade of reinforced cement concrete excluding the cost ofcentring, shuttering, finishing and reinforcement- 1:2:4 ( 1 Cement: 2 fine sand : 4 graded well burnt brick aggregate 20 mm nominal size) |
| 8 | Reinforcement for R.C.C. work including straightening,cutting, bending, placing in position and binding allcomplete upto plinth level.Thermo-Mechanically Treated bars of grade Fe-500D ormore |
| 9 | Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 fine sand : 6 graded well burnt brick aggregate 20 mm nominal size) over 75mm bed of dry brick ballast 40mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth. |
| 10 | Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.i.Hot finished welded type tubes |
| 11 | Supply & installation of pre-painted Galvalume sheets for roofing/cladding (size, shape and pitch of corrugation as approved by Engineer-in-charge) in 550mpa steel grade, made out of Cold Rolled Steel coated with Zinc-Aluminium alloy coating of 43.5% Zn, 55% Al and 1.5% Silicon confirming to ASTM A792/A792M and AS1397, Alloy coating AZ150/AZ70, colour coated with high quality Polyester coating, top coated of modified polyester of 20 micron, back side coat of 5 micron, having epoxy primer coat of 5 micron on both side. Sheet should have protective guard film of 25 microns minimum to avoid scratches while transportation and should be supplied in single length upto 12 metre or as desired by Engineer-incharge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55mm) with EPDM washers filled with white lead complete upto any pitch in horizontal/ vertical or curved surfaces excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.1). 0.45mm thickness |
| 12 | Supply & installation of pre-painted Galvalume sheets roofing accessories in 550mpa steel steel grade, made out of Cold rolled steel coated with Zinc-Aluminium alloy coating of 43.5% Zn, 55% Al and 1.5% Silicon confirming to AASTM A792/A792M and AS1397, Alloy coating AZ150/AZ70, colour coated with high quality polyester coating, top coated of modified polyester of 20 micron, back side coat of 5 micron, having epoxy primer coat of 5 micron on both side. Sheet shouldhaveprotective guard film of 25 microns minimum to avoid scratches while transportation. Sheet should have protective guard film of 25 microns minimum to avoid scratches while transportation. The sheet shall be fixed using self drilling /self tapping screws with EPDM washers complete for Ridges/Valley/Gutter/Flashing of width 610mm:a) 0.45mm thickness |
| 13 | First class brick work in foundation and plinth including cost of all materials as required complete:a)In cement mortar 1:4 ( 1 cement : 4 fine sand ). |
| 14 | First class brick work in superstructure above plinth level & upto floor-five level including cost of all materials as required complete:a) In cement mortar 1:4 ( 1 cement : 4 fine sand ). |
| 15 | Half brick masonry work with first class bricks in foundation and plinth including cost of all materials as required complete:- In cement mortar 1:4 ( 1 cement : 4 fine sand ) |
| 16 | Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. all complete. b) Fixed to openings /wooden frames with rawl plugs screws etc. |
| 17 | Half brick masonry work with first class bricks in superstructure upto floor five level including cost of all materials as required complete:-a)In cement mortar 1:4 ( 1 cement : 4 fine sand ). |
| 18 | Providing and fixing 1st quality ceramic glazed wall tiles (minimum 200 x 300) conforming to IS : 15622 - 2017 (thickness to be specified by the manufacturer) of approved make in all colours, shades of any size as approved by Engineer-in-charge in skirting, risers of steps and dados, laid over 12 mm thick bed of cement mortar 1 : 3 (1 cement : 3 fine sand) jointed with ordinary cement slurry including pointing with white cement mixed with pigment of matching shade complete. |
| 19 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622 - 2017, of approved make, in all colours and shades, laid over 20mm thick cement mortar 1:4 (1 cement : 4 fine sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete.Double charged Stainfree vitrified tiles 10.42.2.1 Size of tile 60x60 cm |
| 20 | 12 mm cement plaster of mixa) In cement mortar 1 : 4 ( 1 cement : 4 fine sand ) |
| 21 | Neat cement punning. |
| 22 | Applying one coat of water thinnable cement primer of approved brand and manufacturer on wall surface complete.Water thinnable cement primer |
| 23 | Finishing walls with water proofing cement paint of required shade of approved brand and manufacture [Payment shall be made after submission of Test Certificate issued by the Manufacturer] :a)New work ( two or more coats applied @ 3.84 kg/10 sqm) |
| 24 | Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade [Payment shall be made after submission of Test Certificate issued by the Manufacturer] :a)New work ( two or more coats) over and including water thinnable priming coat with cement primer. |
| 25 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position :a) Karai wood. |
| 26 | Providing wood work in frames of false ceiling, partitions etc. sawn and put up in position :a) Karai wood./Jum Wood |
| 27 | Providing and fixing panelled / or panelled and glazed shutters for doors, windows and clerestory windows including ISI marked bright finished / black enamelled M.S butt hinges with necessary screws excluding panelling and or glazing, which will be paid for separately but including the wooden beading of 20 × 12 mm for fixing panelling and or glazing as per direction of Engineer-In-Charge.Local Teak wooda) 30 mm thick shutters |
| 28 | Providing and fixing plain Multipurpose Cement board(High Pressure steam cured) as per IS : 14862 :2000 with suitable screws for fibre cement board inceiling etc. complete (frame work to be paid separately) : 6 mm thick cement board |
| 29 | Providing and fixing IS : 1341 marked M.S. heavy weight butt hinges with necessary screws etc. complete :a) 125 × 90 × 4.00 mm. |
| 30 | Providing and fixing ISI marked oxidised M.S.sliding door bolts with nuts and screws etc. completea)250 x 16 mm |
| 31 | Providing and fixing ISI marked oxidised M.S. tower bolt black finish, (Barrel type) with necessary screws etc. complete :a)200 x 10 mm |
| 32 | Providing and fixing ISI marked oxidised M.S. handles conforming to IS:4992 with necessary screws etc. completea) 100 mm. |
| 33 | Providing 40 × 5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bolts,nuts and wooden plugs and embedding in cement concrete block 30 × 10 × 15 cm 1:3:6 mix (1 cement : 3 fine sand : 6 graded stone aggregate 20mm nominal size |
| 34 | Applying priming coat [Payment shall be made after submission of Test Certificate issued by the Manufacturer] : i)With ready mixed Pink or Grey primer of approved brand and manufacture on wood work ( hard & soft wood ). |
| 35 | Painting on wood work with oil type wood preservative ( two or more coats) of approved brand and manufacture on new work complete. |
| 36 | Providingandfixingsoftwood(chamal) eaveboard25mm.thickand 225 mm. wide includingpainting two coats complete as directed |
AI Tender Summary
Tender Timeline
Mar 06, 2023
11:30 IST
Tender Published
Tender notice published.
CompletedMar 20, 2023
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedMar 20, 2023
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender