Construction Of 11 Kv And Lt Line For Jhalas From The Region Of Makrandapur Choraha, Makrandapur, Jaisahi Nagar, Madhwapur, Baesahi Nagar, Basae On 11 Kv Madhwapur Feeder At Dueria Ss Pilibhit Under Edd-Bisalpur.
Tender Value
7 Lakhs
Estimated cost
Bid Submission
13 Mar 2023
0 days left
EMD
7000
Bank guarantee accepted
Document Fee
1180
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
bisalpur → Uttar Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Construction Of 11 Kv And Lt Line For Jhalas From The Region Of Makrandapur Choraha, Makrandapur, Jaisahi Nagar, Madhwapur, Baesahi Nagar, Basae On 11 Kv Madhwapur Feeder At Dueria Ss Pilibhit Under Edd-Bisalpur.
BOQ
| Sl. No. | Item Description |
| 1 | Carriage of following line material for 11KV line from Store Centre to the site of work including measuring, weighing, loading, unloading at both ends and proper stacking at safe site |
| 2 | STP 11Mtr. long |
| 3 | PCC Pole 8.5Mtr. Long |
| 4 | 11 KV Cross Arm Channel V type |
| 5 | 11 KV Pin insulator |
| 6 | 11 KV Pin with nut |
| 7 | 11 KV Disc insulator |
| 8 | 11 KV Disc fitting |
| 9 | ACSR weaselconductor |
| 10 | Cable LT ABC (3X50+1X35+1x16) sqmm |
| 11 | G.I. wire 8 SWG |
| 12 | Stay set complete |
| 13 | Stay Set Complete LT |
| 14 | Earthing complete |
| 15 | 11/0.4 KV 25 KVA Transformer |
| 16 | 11 KV TPMO |
| 17 | Distribution Box three Phase with clamp |
| 18 | Gaurding Angle 1.6mtr. Long |
| 19 | M.S angle lron 65x65x6mm, 4300mm long @ 5.8 Kg/Mt (bracing) |
| 20 | M.S.Channel 100X50X2240mm @ 9.6Kg/Mt. (Top channel & dropper) |
| 21 | MS Channel 100x50x2028mm (Dropper for Fuse set) |
| 22 | MS angle 75x75x6x2028 mm) with clamp & bolt and nut (T/F base) |
| 23 | MS Channel 125x65x2240 (Top) |
| 24 | MS Channel 125x65x1300mm Tee off |
| 25 | E- bracket with bolt & nut |
| 26 | F- bracket with bolt & nut |
| 27 | Cross Arm holding clamp |
| 28 | Alluminium Binding wire-6 SWG |
| 29 | 11 KV Fuse set |
| 30 | Erection of the following supports including cutting, making holes, fixing of all types of accessories digging of pits complete in all respect, as per RESSPO drawing. All types of clamps, stone pad, nut, bolt washers would be provided by the contractor. |
| 31 | Single support of S.T pole 11 mtr long for 11 kv line and road crossing |
| 32 | Single support of PCC pole 8.5 mtr long. |
| 33 | Double pole structure on PCC. Pole 8.5mtr long complete with bracing for sectional double pole |
| 34 | Double pole structure on PCC. Pole 8.5mtr long complete with bracing for25 KVA T/F |
| 35 | Concreting of supports at the time of erection of pole in 1:4:8 concrete ratio from bottom of pole to ground leveland plinthing of supports upto 300mm above ground level by using cement, sand & coarse aggregate in ratio 1:4:8 as per RESSPO drawing with watering/curing properly upto proper setting of plinthing. All matrial would be provided by the contractor. |
| 36 | Erection of stay set with stay wire, stay clamp & stay insulator including with grouting of stay set by concrete of ratio 1:4:8 as per RESSPO norms before back fitting of the pits including binding, climbing, clamping, tightening and nozzeling of stay wire in all respect as per RESSPO norms. All clamps, nuts, bolts, stay insulator, cement. brick, ballast, sand etc would be provided by the contractor. |
| 37 | Laying and sagging of 3 phase ACSR Weasel conductor from double pole at 33/11 KV substation to double pole at tapping point of 11 KV feeder line including jumpering, hoisting, fixing of all type of insulators, binding, jointing and its clamping etcin all respect. |
| 38 | Laying ofLT ABC (3X50+1X35+1X16) sq.mm for 11 KVL.T Line. |
| 39 | Earthing of each S.T Poles of the line is to be done by inserting the MS earth rod (1800x20mm) into soil by hammering and properly fastning with GI wire to each support by nut & bolt. Earthing rod must be 0.15Mtr.above from the plinth of the support. All type nut & bolt would be given by the contractor. |
| 40 | Earthing of each PCC Poles of the line is to be done by inserting the MS earth rod (1800x20mm) into soil by hammering and properly fastning with GI wire to each support by nut & bolt. Earthing rod must be 0.15Mtr.above from the plinth of the support. All type nut & bolt would be given by the contractor. |
| 41 | Guarding of HT/LT/Telephone Line/ Road/River Crossing etc. by providing G.S Earth wire 7/16 SWG/GI wire No. 8/10 and making net with difference of 1.00 Mtr. Completely including fixing of channel/angle etc. with proper locking at each support as per RESSPO norms. All type nut &bolts, would be given by the contractor. |
| 42 | Fixing of 3 Phase distribution box on pole including proper clamping. All material would be provided by firm. |
| 43 | Fixing of danger board and G.I barbed wire on each pole including proper clamping. All material would be provided by firm. |
| 44 | Painting of Single pole structure of 11 mtr. ST Pole. of existing 11 KV line with one coat of red oxide primer and two coats of aluminium white paint of ISI mark and top danger portion of each support must be painted by providing two coat of Post Office Red Paint (1.5mtr upper portion of support.) Paint and material would be given by contractor to complete of work. |
| 45 | mounting of transformers on double pole andlaying of cable jumpering and making all HT/LT connections complete work in all respect . |
| 46 | Fixing of TPMO complete work in all respect. |
| 47 | Clearing of the line route by cutting of tree branches during erection of line and also upto the time of energisation completely as per direction of site incharge. |
AI Tender Summary
Tender Timeline
Mar 03, 2023
11:30 IST
Tender Published
Tender notice published.
CompletedMar 13, 2023
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedMar 14, 2023
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender