|
| 1 | Caliper outside spring joint | 150 mm |
| 2 | Caliper inside spring joint | 150 mm |
| 3 | Caliper odd-leg firm joint | 150 mm |
| 4 | Steel Rule | 150 mm, Graduated both in Metric and English Unit |
| 5 | Scriber | 150mm x 3 mm |
| 6 | Hammer ball peen | 250 gm with handle |
| 7 | Centre punch | 100 mm |
| 8 | Divider spring joint | 150 mm |
| 9 | Safety goggles clear glass Good quality | As per NCVT Norms |
| 10 | V Block | 150X100X100mmwithClamp Hardened and Ground |
| 11 | Hammer ball peen | 750 gm with handle |
| 12 | Chisel cold flat | 20 x 150 mm |
| 13 | Hammer copperbrass | 500 gm with handle |
| 14 | Hacksaw fixed | 200 mm Pistol grip |
| 15 | File flat | 300 mm rough |
| 16 | File flat | 250 mm 2nd cut |
| 17 | File flat | 250 mm smooth |
| 18 | File half round | 250 mm 2nd cut |
| 19 | File round | 250 mm smooth |
| 20 | File half round | 150 mm smooth |
| 21 | Micrometer Outside 0 to25mm | 0 to25mm,LeastCount0.01 mm with NABL Accredited lab Certificate |
| 22 | Micrometer Outside 25 to 50 mm | 25 to 50 mm, Least Count 0.01 mm with NABL Accredited lab Certificate |
| 23 | Micrometer Outside 50to 75 mm | 50to 75 mm, Least Count 0.01mm with NABL Accredited lab. Certificate |
| 24 | Micrometer Inside up to 25 mm | up to 25 mm, Least Count 0.01 mm with NABL Accredited lab Certificate |
| 25 | Depth Gauge Micrometer | 0 to 150 mm, Least Count 0.01mm with NABL Accredited lab. Certificate |
| 26 | Dial Vernier Caliper with metric | 200 mm, Least Count 0.05 mm withNABLAccreditedlab Certificate |
| 27 | Vernier Bevel Protractor | 300mmbladewithNABLAccredited lab. Certificate |
| 28 | Gauge Feeler | Thickness - 0.05 mm to 0.3 mm by0.05and0.4mmto1mmby 0.1 mm - 13 leaves |
| 29 | Gauge Radius Set | 1 mm to 25 mm by 0.5 mm |
| 30 | Centre Gauge | com. 60°, 55° and 29° |
| 31 | Screw Pitch Gauge | WhitworthandMetriceach0.25 to 6mm |
| 32 | Drill Angle Gauge | As per NCVT Norms |
| 33 | Universal Dial Test Indicator Plunger Type | Range0-10mm,Graduation 0.01 mm complete with Clamping Devices and Magnetic Stand |
| 34 | Vernier Height Gauge | 0 - 300 mm, LC 0.02 mm with NABL Accredited lab. Certificate |
| 35 | Try Square | 150 blades |
| 36 | Magnifying Glass | 75 mmwithmagnifyingfactor 10X |
| 37 | Sine Bar with centers | 200 mm |
| 38 | Slip Gauge metric set | 87piecesina Box with workshop grade |
| 39 | Tap and Die | B.A. No. 0 to 10 in a box |
| 40 | Tap and Die Set | Metric - 3 to 24 mm |
| 41 | Tap and Die | B.S.F. up to 1 inch |
| 42 | Tap and Die | B.S.W. up to 1 inch |
| 43 | Reamer Adjustable | 10 to 20 mm |
| 44 | Steel Rule | 300 mm with Metric and Inch |
| 45 | Oil Can | ½ pint pressure feed system |
| 46 | Spirit Level | 0.05 mm200 mm |
| 47 | Oil Stone | 12 mm sq. x 100 long fine |
