|
| 1 | Boring, providing and installation bored cast-in-situ reinforced cement concrete piles of grade M- 25 of specified diameter and length below the pile cap, to carry a safe working load not less than specified, excluding the cost of steel reinforcement but including the cost of boring with bentonite solution and temporary casing of appropriate length for setting out and removal of same and the length of the pile to be embedded in the pile cap etc. by percussion drilling using Direct mud circulation (DMC) or Bailer and chisel technique by tripod and mechanical Winch Machine all complete, including removal of excavated earth with all its lifts and leads (length of pile for payment shall be measured up to bottom of pile cap). |
| 2 | 75cm Dia |
| 3 | 70cm Dia |
| 4 | 60cm Dia |
| 5 | 45cm Dia |
| 6 | Chipping concrete at top of piles already casted, removing debris from site and clearing the yard . |
| 7 | Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil |
| 8 | Filling available excavated earth (excluding rock) in , inside the basement etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift from 1.5 to 3m depth |
| 9 | Sand filling with river sand or equal and of approved quality cut and conveyed to the site including watering, consolidating by ramming in uniform layers not exceeding 20cm thickness, for filling inside the basement and yard etc. complete as directed by the Engineer in charge |
| 10 | Filling available excavated earth (excluding rock) in, sides of foundation / retaining wall / yard etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift from 1.5 to 3m depth |
| 11 | PCC 1:3:6 ( 1 cement, 3 sand and 6 broken stone) using 40mm and 20mm nominal size granite broken stones in the ratio 4:1 for levelling course for foundations, plinth beam etc. including cost and conveyance of all materials to site, watering for curing, hire and labour charges for all formwork etc. complete. |
| 12 | Providing and laying in position machine batched by weight machine mixed and machine vibrated design mixed cement concrete of specified grade for RCC Retaining wall cement concrete structural elements using graded hard granite stone aggregate of maximum 20 mm nominal (down graded ) size obtained from approved quarry including fine aggregate conforming to latest IS 383 and cement all as per approved design mix proportions conforming to latest IS 10262 with cement content for durability shall be followed as per latest IS 456 including mixing, transporting, placing, vibrating, compaction, finishing to required levels, curing etc. complete as per the specification including cost and conveyance of all materials to site, all labour charges, watering for curing etc complete but excluding cost of steel reinforcement .Rate to include labour for keeping embedment if any where ever required while casting. Rate also include lift charges and scaffolding for all specified height/depths, levels from finished floor level/or ground level using RCC M20. (Design mix proportion shall clearly indicate cement :fine aggregates : coarse aggregate : water cement ratio and approval shall be obtained from Engineer in charge) |
| 13 | Providing and laying in position machine batched by weight machine mixed and machine vibrated design mixed cement concrete of specified grade for RCC Pile cap , cement concrete structural elements using graded hard granite stone aggregate of maximum 20 mm nominal (down graded ) size obtained from approved quarry including fine aggregate conforming to latest IS 383 and cement all as per approved design mix proportions conforming to latest IS 10262 with cement content for durability shall be followed as per latest IS 456 including mixing, transporting, placing, vibrating, compaction, finishing to required levels, curing etc. complete as per the specification including cost and conveyance of all materials to site, all labour charges, watering for curing etc complete but excluding cost of steel reinforcement Rate to include labour for keeping embedment if any where ever required while casting. Rate also include lift charges and scaffolding for all specified height/depths, levels from finished floor level/or ground level using RCC M20. (Design mix proportion shall clearly indicate cement :fine aggregates : coarse aggregate : water cement ratio and approval shall be obtained from Engineer in charge) |
| 14 | Providing and laying in position machine batched by weight machine mixed and machine vibrated design mixed cement concrete of specified grade for RCC columns(for all dimensions), cement concrete structural elements………… and scaffolding for all specified height/depths, levels from finished floor level/or ground level using RCC M 30 . (Design mix proportion shall clearly indicate cement :fine aggregates : coarse aggregate : water cement ratio and approval shall be obtained from Engineer in charge) |
| 15 | Basement Floor |
| 16 | Ground Floor |
| 17 | First Floor |
| 18 | Terrace Floor |
| 19 | Providing and laying in position machine batched by weight machine mixed and machine vibrated design mixed cement concrete of specified grade for RCC Plinth beam , cement concrete structural elements using graded hard granite stone aggregate of maximum 20 mm nominal (down graded ) size obtained from approved quarry including fine aggregate conforming to latest IS 383 and cement all as per approved design mix proportions conforming to latest IS 10262 with cement content for durability shall be followed as per latest IS 456 including mixing, transporting, placing, vibrating, compaction, finishing to required levels, curing etc. complete as per the specification including cost and conveyance of all materials to site, all labour charges, watering for curing etc complete but excluding cost of steel reinforcement.Rate to include labour for keeping embedment if any where ever required while casting. Rate also include lift charges and scaffolding for all specified height/depths, levels from finished floor level/or ground level using RCC M20. (Design mix proportion shall clearly indicate cement :fine aggregates : coarse aggregate : water cement ratio and approval shall be obtained from Engineer in charge) |
| 20 | BF |
| 21 | GF |
| 22 | Providing and laying in position machine batched by weight machine mixed and machine vibrated design mixed cement concrete of specified grade for RCC Lift pit , cement concrete structural elements using graded hard granite stone aggregate of maximum 20 mm nominal (down graded ) size obtained from approved quarry including fine aggregate conforming to latest IS 383 and cement all as per approved design mix proportions conforming to latest IS 10262 with cement content for durability shall be followed as per latest IS 456 including mixing, transporting, placing, vibrating, compaction, finishing to required levels, curing etc. complete as per the specification including cost and conveyance of all materials to site, all labour charges, watering for curing etc complete but excluding cost of steel reinforcement.Rate to include labour for keeping embedment if any where ever required while casting. Rate also include lift charges and scaffolding for all specified height/depths, levels from finished floor level/or ground level using RCC M20. (Design mix proportion shall clearly indicate cement :fine aggregates : coarse aggregate : water cement ratio and approval shall be obtained from Engineer in charge) |
| 23 | Providing and laying in position machine batched by weight machine mixed and machine vibrated design mixed cement concrete of specified grade for RCC beam , cement concrete structural elements using graded hard granite stone aggregate of maximum 20 mm nominal (down graded ) size obtained from approved quarry including fine aggregate conforming to latest IS 383 and cement all as per approved design mix proportions conforming to latest IS 10262 with cement content for durability shall be followed as per latest IS 456 including mixing, transporting, placing, vibrating, compaction, finishing to required levels, curing etc. complete as per the specification including cost and conveyance of all materials to site, all labour charges, watering for curing etc complete but excluding cost of steel reinforcement Rate to include labour for keeping embedment if any where ever required while casting. Rate also include lift charges and scaffolding for all specified height/depths, levels from finished floor level/or ground level using RCC M20. (Design mix proportion shall clearly indicate cement :fine aggregates : coarse aggregate : water cement ratio and approval shall be obtained from Engineer in charge) |
| 24 | Basement Floor |
| 25 | Ground Floor |
| 26 | First Floor |
| 27 | Terrace Floor |
| 28 | Providing and laying in position machine batched by weight machine mixed and machine vibrated design mixed cement concrete of specified grade for RCC Slab and Shade , cement concrete structural elements using graded hard granite stone aggregate of maximum 20 mm nominal (down graded ) size obtained from approved quarry including fine aggregate conforming to latest IS 383 and cement all as per approved design mix proportions conforming to latest IS 10262 with cement content for durability shall be followed as per latest IS 456 including mixing, transporting, placing, vibrating, compaction, finishing to required levels, curing etc. complete as per the specification including cost and conveyance of all materials to site, all labour charges, watering for curing etc complete but excluding cost of steel reinforcementRate to include labour for keeping embedment if any where ever required while casting. Rate also include lift charges and scaffolding for all specified height/depths, levels from finished floor level/or ground level using RCC M20. (Design mix proportion shall clearly indicate cement :fine aggregates : coarse aggregate : water cement ratio and approval shall be obtained from Engineer in charge) |
| 29 | Basement Floor |
| 30 | Ground Floor |
| 31 | First Floor |
| 32 | Terrace Floor |
| 33 | Providing and laying in position machine batched by weight machine mixed and machine vibrated design mixed cement concrete of specified grade for RCC Stair , cement concrete structural elements using graded hard granite stone aggregate of maximum 20 mm nominal (down graded ) size obtained from approved quarry including fine aggregate conforming to latest IS 383 and cement all as per approved design mix proportions conforming to latest IS 10262 with cement content for durability shall be followed as per latest IS 456 including mixing, transporting, placing, vibrating, compaction, finishing to required levels, curing etc. complete as per the specification including cost and conveyance of all materials to site, all labour charges, watering for curing etc complete but excluding cost of steel reinforcement Rate to include labour for keeping embedment if any where ever required while casting. Rate also include lift charges and scaffolding for all specified height/depths, levels from finished floor level/or ground level using RCC M20. (Design mix proportion shall clearly indicate cement :fine aggregates : coarse aggregate : water cement ratio and approval shall be obtained from Engineer in charge) |
| 34 | Basement Floor |
| 35 | Ground Floor |
| 36 | First Floor |
| 37 | Centering and shuttering including strutting, propping etc. and removal of form for Footing, Lintels, beams, plinth beams, Column and slab. Including cost and conveyance of all materials to site, all labour charges, hire and labour charges for form work, etc complete |
| 38 | Pile Cap |
| 39 | Retaining Walls |
| 40 | Columns |
| 41 | Plinth beam |
| 42 | Beam |
| 43 | Slab, Shade |
| 44 | Staircase |
| 45 | Reinforcement for R.C.C works bent cold tied with binding wire and placed in position as per details regarding size of rods and spacing shown in the structural drg. with spacer for cover etc. using Thermo-Mechanically Treated bars of grade Fe500D or more including all labour charge, etc.,complete for all floors. |
| 46 | Pile |
| 47 | Pile Cap |
| 48 | Retaining Walls |
| 49 | Column |
| 50 | Plinth beam |
| 51 | Beam |
| 52 | Slab, Shade |
| 53 | Stair |
| 54 | Brick work in cm 1:6, 23cm thick wall using wire cut bricks of size 23x11x7cm. For wall up to 3M height including labour for watering and charges for hire and labour charges for scaffolding ect. Complete |
| 55 | Basement Floor |
| 56 | Ground Floor |
| 57 | First Floor |
| 58 | Terrace Floor |
| 59 | Parapet |
| 60 | FIN WALL |
| 61 | Aluminium Premium Grade (Hindalco/Jindal) Powder coated Outer frame 2.5×1.5 lip section, door vertical, door top, 5\"hinges, 5 mm plain toughened glass, handle with lock, EPDM rubber beading fully finished as per standard drawings, complete as directed by Architect / Consulting Enginee |
| 62 | Aluminium Premium Grade (Hindalco/Jindal) Powder coated Outer frame 2.5×1.5 lip section, door vertical, door top, 4\"hinges, Aluminium Composite Panels, handle with lock, EPDM rubber beading fully finished as per standard drawings, complete as directed by Architect / Consulting Engineer |
| 63 | Aluminium Exterior Grade (Hindalco) Powder coated Open Window, Using Section Outer frame 40 mm x 40 mm, Mullion 55 mm x 40 mm, Shutter 55 mm x 40 mm, clip 38 mm x 18 mm, Cleat angle, Plug and Screw, EPDM Rubber beading, 5 mm toughened clear glass (Saint Gobain / Equivalent) & all other accessories as per standard drawings, complete as directed by Architect / Consulting Engineer. |
| 64 | Anti - termite treatment ( Pre-constructional and post constructional ) It is done by apply the chemical Chlorophyrifos EC solution at 1% chemical concentration. In ratio 1:19 ( one litter chemical van add 19 litters of water ).The top surface of consolidated earth within plinth walls shall be treated with chemical emulsion, before the sand bed or sub-grade is laid. If the filled earth has well rammed and the surface does not allow the emulsion to seep through, holes up to 50 to 75mm deep at 150 mm centers both ways mmay be with 12mm dia.mild steel rod on the surface to facilitate saturation of the soil with the chemical emulsion.etc. complete as directed by the Engineer-in-charge |
| 65 | Flooring with cement concrete 1:3:6 (one cement four sand eight metal) 75mm thick using 40mm hard granite (nominal size) broken stone, including labour charge for watering, curing etc, complete |
| 66 | Plastering for walls with cement mortar 1:5 12 mm thick one coat floated hard and trawled smooth including labour charges watering for curing , hire and labour charges for scaffolding, hacking the R.C.C portions etc. Complete Outside and Inside walls. |
| 67 | Basement Floor |
| 68 | Ground Floor |
| 69 | First Floor |
| 70 | Terrace Floor |
| 71 | PARAPET |
| 72 | Plastering for under surfaces of slab with cement mortar 1:3 10mm thick one coat floated hard and trawled smooth including labour charges watering for curing, hire and labour charges for scaffolding , hacking the R.C.C. portions etc, |
| 73 | Basement Floor |
| 74 | Ground Floor |
| 75 | First Floor |
| 76 | Terrace Floor |
| 77 | Plastering for column with cement mortar 1:3 10 mm thick one coat floated hard and trawled smooth including labour charges watering for curing , hire and labour charges for scaffolding hacking the R.C.C portions etc. Complete |
| 78 | BF |
| 79 | GF |
| 80 | TERRACE FLOOR |
| 81 | Providing and laying Vitrified tiles indifferent sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand), including grouting the joint with white cement & matching pigments etc. complete |
| 82 | Providing granite slab of approved quality ( to be approved by the Architect) of minimum 40mm thickness, fixing in cement mortar 1:6 ( 1 cement, 6 sand ) (as per drawing ) and closing the joints with coloured white cement including cost and conveyance of all materials to site, labour charges for laying, grinding, cutting etc. complete. for Porch |
| 83 | Providing floor finishing with cement mortar 1:3 12mm thick floated hard and trowelled smooth including cost of materials to site and labour charges ,watering for curing ect. Complete |
| 84 | Dadoing walls with best glazed tiles (approved quality and coloured) in Bal Endura 3:1,3.6mm thick and finishing joints with coloured cement, including labour charges for watering, curing, etc, complete for toilet |
| 85 | Providing granite slab of approved quality ( to be approved by the Architect) of minimum 20mm thickness, fixing in cement mortar 1:6 ( 1 cement, 6 sand ) (as per drawing ) and closing the joints with coloured white cement including cost and conveyance of all materials to site, labour charges for laying, grinding, cutting etc. complete. for Tread, rise, and landing for staircase |
| 86 | Providing granite slab of approved quality ( to be approved by the Architect) of minimum 20mm thickness, fixing in cement mortar 1:6 ( 1 cement, 6 sand ) (as per drawing ) and closing the joints with coloured white cement including cost and conveyance of all materials to site, labour charges for laying, grinding, cutting etc. complete. for window sill ,toilet ledge and counter |
| 87 | Fabricating and erecting hand rails with tata ms tube with vertical main members of 50x50 mm MS tube – (18 g) and horizontal member 50x50 and vertical sub members using 2.5x2.5mm ms tube and top of the handrail using 50x50mm teak wood as per the drawing fixed to floor with SS base plate and screwing at 75 cm c/c , including extra charges for welding all the joints properly , SS tubes including fixing the vertical legs in masonry or concrete with suitable sleeves of same SS 304 pipe placed inside the concrete and tightening in the screws from the bottom/sides so as to enable to fix after flooring with sufficient nos. of additional members and fixing the rail to correct plumb and line including cost of epoxy primer and two coat synthetic enamel paint etc. complete. for balcony and staircase |
| 88 | Staircase |
| 89 | Balcony |
| 90 | Providing and Welding together Tata Steel Tube section for Wall plates, Rafters, Ridges and Purlins, Plates bolts and nuts, cleats, Base plates including cutting, jointing by welding hoisting and erecting in positions to correct line and level for roof. {as per the structural drawing} including hire and labour charges for scaffolding, applying two coat of epoxy primer after scraping and cleaning the surfaces properly and applying two coats of synthetic enamel paint {approved Colours} including cost and conveyance of all materials to site, labour charges, etc. complete |
| 91 | Supplying and fixing MP roofing tile and ceiling tile(Approved make)over steel rafters including cost of materials, conveyance, labour charges for fixing etc. complete for roof |
| 92 | Supplying and fixing Ridge tile(Approved make)over steel rafters including cost of materials, conveyance, labour charges for fixing etc.complete |
| 93 | Providing external wall cladding with cladding tile of approved quality ( to be approved by the Architect) laying so as to get continuous grains fixing in cement mortar 1:6 ( 1 cement, 6 sand ) and closing the joints with coloured white cement including cost and conveyance of all materials to site, labour charges for laying, grinding, with etc. complete |
| 94 | Painting with ready mixed plastic emulsion paint two coat of approved quality and colour over a priming coat using cement primer after dusting and cleaning the surface applying putty including hire and labour charges for scaffolding etc.complete. For inside the room |
| 95 | Supplying and painting with exterior paint with one coat of exterior primer + 2 coat of exterior emulsion ( Asian,ICI or Berger ) including cost and conveyance of all materials to site, labour charges and all other charges etc. complete. For outer walls |
| 96 | Painting with ready mixed plastic emulsion paint two coat of approved quality and colour over a priming coat using cement primer after dusting and cleaning the surface including hire and labour charges for scaffolding etc. complete. For ceiling |
| 97 | Painting with stone clear two coat of approved make and quality after dusting and cleaning the surface including hire and labour charges for scaffolding etc. complete. For cladding |
| 98 | Providing and Welding together tata ms sq rod of 12mm grill for window as per design including cutting, jointing by welding hoisting and erecting in positions to correct line and level including hire and labour charges for scaffolding, applying two coat of epoxy primer after scraping and cleaning the surfaces properly and applying two coats of synthetic enamel paint {approved Colours} including cost and conveyance of all materials to site, labour charges, etc. complete |
