Tender For Supply Of Tools And Equipment Of Fitter And Welder Trades, lalru-Punjab

Supply Of Tools And Equipment Of Fitter And Welder Trades , Different Profile Gauges (Plate Type) - For Demonstration Metric Standard , Knurling Tool (Diamond, Straight & Diagonal) , Indexable Boring Bar With Inserts 1 Shank , Machine Maintenance Mannual For Lathe,Pedestal Grinder, Drill Machine, Power Saw , Temperature Gauge Range 0 - 150°C , Dowel Pin ( Straight) Dia. -1 Length -4 (Mat:Stainless Steel) , Standard Tap Screws M3, M4, M5, M6, M8, M10, M12,M14, M16 , Lapping Plate Dia. -6 , Jigs & Fixture (Sample)-For Demonstration (May Be Manufactured In-House) , Pulleys (For V-Belt Or Flat Belt) To Fit On 50Mm Dia. Shaft With Key Slot , Steel Keys (May Be Manufactured In-House) To Fit With Keyslot Of Shaft & Pulley , Damaged Old Spur Gear To Fit 50Mm Dia. Shaft , V-Belt And Flat Belt To Fit On Pulley , Packing Gasket Ptfe Gasket Roll Small Size , Washer, Clutch, Keys, Jib, Cotter & Circlip Minimum 25Mm Size, Carbon Steel Material , Hollow Punch Straight Shank Hollow Punch Sets 5-12Mm , Drill Drift (May Be Manufactured In-House) 200Mm Hardened And Black Finish , Lifting Sling 8Mm Nominal Dia. Single Leg Sling , Bearing Extractor Universal Gear Puller 2 Or 3 Jaws Adjustable , Pulley Extractor Universal Gear Puller 2 Or 3 Jaws Adjustable , Flat Headed Hammers With Handle. , Planishing Hammer. , Stake Hatchet With Leg. 300 X 200 X 20 Mm , Stake Grooving. 100 X 100 X 300 Mm , Gauge Snap Go And Not Go 25 To 50 Mm By 5 Mm, Set Of 6 Pieces , Gauge Telescopic Set. 8 - 150 Mm , Dial Vernier Caliper. (Universal Type) 0 - 300 Mm, Lc 0.05 Mm , Screw Thread Micrometer With Interchangeable. Pitch Anvils For Checking Metric Threads 60. 0 - 25 Mm Lc 0.01 Mm , Digital Micrometer Outside. 0 - 25 Mm L.C. 0.001 Mm , Comparators Gauge - Dial Indication With Stand And Bracket. Lc 0.01Mm , Carbide Wear Block. 1 Mm - 2 Mm , Lathe Tools H.S.S. Tipped Set. , Lathe Tools Bit. 6 Mm X 75 Mm Hss/Carbide , Lathe Tools Bit. 8 Mm X 75 Mm Hss/Carbide , Lathe Tools Bit. 10 Mm X 75 Mm Hss/Carbide , Arm Strong Type Tool Bit Holder. 10 Mm X 75 Mm Hss/Carbide , Arm Strong Type Tool Bit Holder. Left Hand , Arm Strong Type Tool Bit Holder. Straight , Stillson Wrenches 250 Mm , Pipe Bender Machine Spool Type With Stand Manually Operated. Up To 25 Mm Cold Bending , Adjustable Pipe Chain Tonge To Take Pipes Up To 300 Mm , Adjustable Spanner. 380 Mm Long , Compressor Unit Suitable For Pressure: 8 Bar, Delivery:50 Lpm (Or More), Reservoir Capacity:24 Litres (Or More), 230V, 50 Hz, With Pressure Regulator And Water Separator , Pneumatic Trainer Kit, Each Consisting Of The Following Matching Components And Accessories: , Single Acting Cylinder Max. Stroke Length 50 Mm, Bore Dia 20 Mm , Double Acting Cylinder Max. Stroke Length 100 Mm, Bore Dia 20 Mm, Magnetic Type , 3/2-Way Valve Manually-Actuated, Normally Closed , 3/2-Way Valve Pneumatically-Actuated, Spring Return , One-Way Flow Control Valve , 5/2-Way Valve With Manually-Operated Switch , 5/2-Way Valve Pneumatically-Actuated, Spring Return , 5/2-Way Pneumatic Actuated Valve Double Pilot , 3/2-Way Roller Lever Valve Direct Actuation Normally Closed , Shuttle Valve (Or) , Two-Pressure Valve (And) , Pressure Gauge 0-16 Bar , Manifold With Self-Closing Nrv, 6-Way , Pushbutton Station For Electrical Signal Input With 3 Illuminated Momentary-Contact Switches (1 No + 1 Nc) And 1 Illuminated Maintained-Contact Switch (1 No + 1 Nc), Contact Load 2A , Relay Station With 3 Ralays Each With 4 Contact Sets (3No+1Nc Or Change-Over Type), 5 A , 3/2-Way Single Solenoid Valve With Led , 5/2-Way Single Solenoid Valve With Manual Override And Led , 5/2-Way Double Solenoid Valve With Manual Override And Led , Power Supply Unit, Input Voltage 85 - 265 V Ac, Output Voltage: 24 V Dc, Output Current: Max. 4.5 A, Short-Circuit-Proof. , Profile Plate, Anodised Aluminium 1100X700 Mm, With Carriers, Mounting Frames And Mounting Accessories (To Be Fitted Onto The Pneumatic Workstation) , Pneumatic Workstation With 40 Square Mm Aluminium Profile Legs, Wooden Work Surface, And One Pedestal Drawer Unit Having 5 Drawers, Each With Handles And Individual Locks, On Metallic Full Panel Drawer Slide: (1) Work Table - Size(Approx.) L1200mmxw900mmxh900mm, With Four Castor Wheels Including Two Lockable Wheels At The Front Side, (2) Drawer - Size (Approx.) - L460mmxw495mm Xh158mm Each,And Overall Size Of Drawer Unit (Approx.) -L470mmxw495mmxh825mm And (3) Drawer Slide Height (Approx.) 85Mm. , Carrier For Mounting Components, Such As Pb & Relay Boxes. , Cut Section Model For Pneumatic Components , Hydraulic Trainer Kit, Each Consisting Of The Following Matching Components And Accessories: , Hydraulic Power Pack With (1) External Gear Pump Having A Delivery Rate Of 2.5 Lpm, (Approx.) @1400 Rpm Operating Pressure 60 Bar,Coupled To A Single-Phase Ac Motor (230 V Ac) Having Start Capacitor And On/Off Switch And Overload Protection, (2) Pressure Relief Valve Adjustable From 0 - 60 Bar, (3) Oil Reservoir, =5 Litres Capacity Having Sight Glass, Drain Screw, Air Filter, And P And T Ports , Pressure Relief Valve Pilot-Operated , Drip Tray, Steel Size 1160 Mm X 760 Mm. , Pressure Gauge Glycerin-Damped, Indication Range Of:0 - 100 Bar , Four-Way Distributor With Five Ports, Equipped With A Pressure Gauge , Double Acting Hydraulic Cylinder With A Control Cam, Piston Diameter16 Mm, Piston Rod Diameter10 Mm, Stroke Length 200 Mm. , Suitable Weight For Vertical Loading Of Hydraulic Cylinder , Mounting Kit For Weight For Realizing Pulling And Pushing Load. , 3/2-Way Directional Control Valve With Hand Lever Actuation , 4/2-Way Directional Control Valve With Hand Lever Actuation. , 4/3-Way Directional Control Valve Closed-Centre Position, With Hand Lever Actuation , Non-Return Valve. , Pilot-Operated Check Valve Pilot To Open. , One-Way Flow Control Valve With Integrated Check Valve. , T-Connector With Self Sealing Coupling Nipples (2 Nos.) And Quick Coupling Socket (1 No.). , Profile Plate, Anodised Aluminium, 1100X700 Mm,With Carriers, Mounting Frames And Mounting Accessories (To Be Fitted Onto The Hydraulic Workstation) , Hydraulic Workstation With 40 Square Mm Aluminium Profile Legs, Wooden Work Surface, And One Pedestal Drawer Unit Having 5 Drawers, Each With Handles And Individual Locks, On Metallic Full Panel Drawer Slide: (1) Work Table - Size(Approx.) L1200mmxw900mmxh900mm, With Four Castor Wheels Including Two Lockable Wheels At The Front Side, (2) Drawer - Size (Approx.) -L460mmxw495mm Xh158mm Each, And Overall Size Of Drawer Unit (Approx.)- L470mmxw495mmxh825mm And (3) Drawer Slide Height (Approx.) 85Mm. , Welding Hand Shield Fiber , Chisel Cold Flat 19 Mm X 150 Mm , Centre Punch 9 Mm X 127 Mm , Stainless Steel Rule 300Mm , Scriber 150 Mm Double Point , Hack Saw Frame Fixed 300 Mm , File Half Round Bastard 300 Mm , File Flat 350 Mm Bastard , Screw Driver 300Mm Blade And 250Mm Blade , Magnifying Glass 100 Mm Dia. , Universal Weld Measuring Gauge , S.S Tape 5 Meters Flexible In Case , First Aid Box , Steel Lockers With 8 Pigeon Holes , Multiangle Magnetic Clamp Set Metal Base (18X10x10 Cm) , Pedestal Grinder Fitted With Coarse And Medium Grain Size Grinding Wheels 300 Mm Dia. , Bench Grinder Fitted With Fine Grain Size Silicon Carbide Green Grinding Wheel 150 Mm Dia. , Ag 4 Grinder , Trolley For Cylinder (H.P. Unit) , Hand Shearing Machine Capacity Cut 6 Mm Sheets And Flats , Power Saw Machine 18’’ Or Blade Size 450 Mm , Oven, Electrode Drying 0 To 350°C,10 Kg Capacity, Depth 450Mm To 500 Mm,Intake Capacity 10 Kg , Oxy Acetylene Gas Cutting Blow Pipe , Oxygen, Acetylene Cylinders , Co2 Cylinder , Argon Gas Cylinder , Swage Block 5048 , Magnetic Particle Testing Kit # , Fire Extinguishers (Foam Type And Co2type) , Fire Buckets With Stand , Portable Abrasive Cut-Off Machine , Welding Simulators For Smaw/Gtaw/Gmaw , Water Cooled Induction Welding/ Brazing Machine 200-250 Amp., Induction Coil Length 3 Inch And 2.5 Inch , Plastic Welding Machine With Hot Air Gun Temp. Display, Variable Temp., Pe,Pp& Pvc Sheet Or Pipe Welding Control With Stand. Accessories. , Swaging And Flooring Tool Kit 450 Tubing 1/8 To ¾ Inch , Leather Hand Gloves 14” , Cotton Hand Gloves 8” , S.S Wire Brush 5 Rows And 3 Rows , Safety Boots For Welders Size 7,8,9,10 , Leg Guards Leather , Rubber Hose Oxygen 8 Mm Dia X 10 Mtr. Long As Per Bis , Rubber Hose Acetylene 8 Mm Dia X 10 Mtr. Long As Per Bis , Arc Welding Single Coloured Glasses 108 Mm X 82 Mm X 3 Mm. Din 11A &12 A , Arc Welding Plain Glass 108 Mm X 82 Mm X 3 Mm. , Gas Welding Goggles With Colour Glass 3 Or 4A Din , Safety Goggles Plain , Ag 4 Grinding Wheels , Earth Clamp 600A , Electrode Holder 600 Amps , Die Penetrant Testing Kit , Anti Spatter Spray Can 100 To 300 Ml , Gmaw Torch Nozzle Tip Size 0.8, 1.0, 1.2 (In Mm) , Tig Welding Torch Ceramic Nozzle Size 3,4,5,6,8 , Tungsten Electrode 1.0, 1.6, 2.0 (In Mm), Length 150 Mm , Ag4 Cutting Wheels , Ccms Filler Wire 1.0 Mm , Brass Filler Wire 1.0 Mm , Copper Filler Wire 1.0 Mm , Flux For Brass , Flux For Copper , Instructor’S Table And Chair (Steel) , Students Chairs With Writing Pads , Instructor’S Laptop With Latestconfiguration Pre-Loaded With Operating System And Ms Office Package. , Lcd Projector With Screen. , 77 Inch Diagonal Interactive Flat Pannel Display, Smart Board For Education Power Consumption 220-300 W Finger Touch Short Panel Of Both Side

INR 1000 /-

INR 33783.0 /-

Refer document

Name of Work: SUPPLY OF TOOLS AND EQUIPMENT OF FITTER AND WELDER

Sl. No.	Item Description
1	Different Profile gauges (Plate type) - For demonstration Metric standard
2	Knurling tool (Diamond, straight & Diagonal)
3	Indexable boring bar with inserts 1" shank
4	Machine maintenance mannual for Lathe,Pedestal grinder, Drill machine, Power saw
5	Temperature gauge Range 0 - 150°C
6	Dowel pin ( straight) Dia. -1" Length -4" (Mat:Stainless Steel)
7	Standard Tap screws M3, M4, M5, M6, M8, M10, M12,M14, M16
8	Lapping plate Dia. -6"
9	Jigs & Fixture (sample)-For demonstration (May be manufactured in-house)
10	Pulleys (for V-belt or Flat belt) to fit on 50mm dia. Shaft with key slot
11	Steel keys (May be manufactured in-house) to fit with keyslot of shaft & pulley
12	Damaged old spur gear to fit 50mm dia. Shaft
13	V-belt and Flat belt to fit on pulley
14	Packing gasket PTFE gasket roll small size
15	Washer, clutch, keys, jib, cotter & circlip minimum 25mm size, carbon steel material
16	Hollow punch Straight Shank Hollow Punch Sets 5-12mm
17	Drill Drift (May be manufactured in-house) 200mm hardened and black finish
18	Lifting sling 8mm Nominal Dia. Single leg sling
19	Bearing extractor Universal gear puller 2 or 3 jaws adjustable
20	Pulley extractor Universal gear puller 2 or 3 jaws adjustable
21	Flat headed hammers with handle.
22	Planishing hammer.
23	Stake hatchet with Leg. 300 X 200 X 20 mm
24	Stake grooving. 100 X 100 X 300 mm
25	Gauge snap Go and Not Go 25 to 50 mm by 5 mm, Set of 6 pieces
26	Gauge telescopic set. 8 - 150 mm
27	Dial vernier caliper. (Universal type) 0 - 300 mm, LC 0.05 mm
28	Screw thread micrometer with interchangeable. Pitch anvils for checking metric threads 60. 0 - 25 mm LC 0.01 mm
29	Digital Micrometer outside. 0 - 25 mm L.C. 0.001 mm
30	Comparators Gauge - Dial Indication with Stand and Bracket. LC 0.01mm
31	Carbide Wear Block. 1 mm - 2 mm
32	Lathe tools H.S.S. tipped set.
33	Lathe tools bit. 6 mm x 75 mm HSS/Carbide
34	Lathe tools bit. 8 mm x 75 mm HSS/Carbide
35	Lathe tools bit. 10 mm x 75 mm HSS/Carbide
36	Arm strong type tool bit holder. 10 mm x 75 mm HSS/Carbide
37	Arm strong type tool bit holder. Left hand
38	Arm strong type tool bit holder. Straight
39	Stillson wrenches 250 mm
40	Pipe bender machine spool type with stand manually operated. up to 25 mm cold bending
41	Adjustable pipe chain tonge to take pipes up to 300 mm
42	Adjustable spanner. 380 mm long
43	Compressor unit suitable for Pressure: 8 bar, Delivery:50 lpm (or more), Reservoir capacity:24 Litres (or more), 230V, 50 Hz, with pressure regulator and water separator
44	Pneumatic Trainer Kit, each consisting of the following matching components and accessories:
45	Single acting cylinder Max. stroke length 50 mm, Bore dia 20 mm
46	Double acting cylinder Max. stroke length 100 mm, Bore dia 20 mm, magnetic type
47	3/2-way valve manually-actuated, Normally Closed
48	3/2-way valve pneumatically-actuated, spring return
49	One-way flow control valve
50	5/2-way valve with manually-operated switch
51	5/2-way valve pneumatically-actuated, spring return
52	5/2-way pneumatic actuated valve double pilot
53	3/2-way roller lever valve direct actuation Normally Closed
54	Shuttle valve (OR)
55	Two-pressure valve (AND)
56	Pressure gauge 0-16 bar
57	Manifold with self-closing NRV, 6-way
58	Pushbutton station for electrical signal input with 3 illuminated momentary-contact switches (1 NO + 1 NC) and 1 illuminated maintained-contact switch (1 NO + 1 NC), Contact load 2A
59	Relay station with 3 ralays each with 4 contact sets (3NO+1NC or Change-over type), 5 A
60	3/2-way single solenoid valve with LED
61	5/2-way single solenoid valve with manual override and LED
62	5/2-way double solenoid valve with manual override and LED
63	Power supply unit, Input voltage 85 - 265 V AC, Output voltage: 24 V DC, Output current: max. 4.5 A, short-circuit-proof.
64	Profile plate, Anodised Aluminium 1100x700 mm, with carriers, mounting frames and mounting accessories (To be fitted onto the pneumatic workstation)
65	Pneumatic Workstation with 40 square mm aluminium profile legs, wooden work surface, and one pedestal drawer unit having 5 drawers, each with handles and individual locks, on metallic full panel drawer slide: (1) Work Table - Size(Approx.) L1200mmXW900mmXH900mm, with four castor wheels including two lockable wheels at the front side, (2) Drawer - Size (Approx.) - L460mmxW495mm xH158mm each,and overall size of Drawer unit (Approx.) -L470mmxW495mmxH825mm and (3) Drawer slide height (Approx.) 85mm.
66	Carrier for mounting components, such as PB & relay boxes.
67	Cut section model for pneumatic components
68	Hydraulic Trainer Kit, each consisting of the following matching components and accessories:
69	Hydraulic Power pack with (1) external gear pump having a delivery rate of 2.5 lpm, (approx.) @1400 rpm operating pressure 60 bar,coupled to a single-phase AC motor (230 V AC) having start capacitor and ON/OFF switch and overload protection, (2) pressure relief valve adjustable from 0 - 60 bar, (3) oil reservoir, =5 litres capacity having sight glass, drain screw, air filter, and P and T ports
70	Pressure relief valve pilot-operated
71	Drip tray, steel size 1160 mm x 760 mm.
72	Pressure Gauge Glycerin-damped, Indication range of:0 - 100 bar
73	Four-Way distributor with five ports, equipped with a pressure gauge
74	Double acting hydraulic cylinder with a control cam, Piston diameter16 mm, Piston rod diameter10 mm, Stroke length 200 mm.
75	Suitable Weight for vertical loading of hydraulic cylinder
76	Mounting kit for weight for realizing pulling and pushing load.
77	3/2-way directional control valve with hand lever actuation
78	4/2-way directional control valve with hand lever actuation.
79	4/3-way directional control valve closed-centre position, with hand lever actuation
80	Non-return valve.
81	Pilot-operated check valve pilot to open.
82	One-way flow control valve with integrated check valve.
83	T-Connector with self sealing coupling nipples (2 Nos.) and quick coupling socket (1 No.).
84	Profile plate, Anodised Aluminium, 1100x700 mm,with carriers, mounting frames and mounting accessories (To be fitted onto the Hydraulic workstation)
85	Hydraulic Workstation with 40 square mm aluminium profile legs, wooden work surface, and one pedestal drawer unit having 5 drawers, each with handles and individual locks, on metallic full panel drawer slide: (1) Work Table - Size(Approx.) L1200mmXW900mmXH900mm, with four castor wheels including two lockable wheels at the front side, (2) Drawer - Size (Approx.) -L460mmxW495mm xH158mm each, and overall size of Drawer unit (Approx.)- L470mmxW495mmxH825mm and (3) Drawer slide height (Approx.) 85mm.
86	Welding hand shield fiber
87	Chisel cold flat 19 mm x 150 mm
88	Centre punch 9 mm x 127 mm
89	Stainless steel rule 300mm
90	Scriber 150 mm double point
91	Hack saw frame fixed 300 mm
92	File half round bastard 300 mm
93	File flat 350 mm bastard
94	Screw Driver 300mm blade and 250mm blade
95	Magnifying glass 100 mm dia.
96	Universal Weld measuring gauge
97	S.S tape 5 meters flexible in case
98	First Aid box
99	Steel lockers with 8 Pigeon holes
100	Multiangle magnetic clamp set Metal base (18x10x10 cm)
101	Pedestal grinder fitted with coarse and medium grain size grinding wheels 300 mm dia.
102	Bench grinder fitted with fine grain size silicon carbide green grinding wheel 150 mm dia.
103	AG 4 Grinder
104	Trolley for cylinder (H.P. Unit)
105	Hand shearing machine capacity cut 6 mm sheets and flats
106	Power saw machine 18’’ or blade size 450 mm
107	Oven, electrode drying 0 to 350°C,10 kg capacity, depth 450mm to 500 mm,intake capacity 10 kg
108	Oxy Acetylene Gas cutting blow pipe
109	Oxygen, Acetylene Cylinders
110	CO2 cylinder
111	Argon gas cylinder
112	Swage block 5048
113	Magnetic particle testing Kit #
114	Fire extinguishers (foam type and CO2type)
115	Fire buckets with stand
116	Portable abrasive cut-off machine
117	Welding Simulators for SMAW/GTAW/GMAW
118	Water cooled induction welding/ Brazing machine 200-250 Amp., induction coil length 3 inch and 2.5 inch
119	Plastic welding machine with hot air gun temp. display, variable temp., PE,PP& PVC sheet or pipe welding control with stand. Accessories.
120	Swaging and flooring tool kit 450 tubing 1/8 to ¾ inch
121	Leather Hand Gloves 14”
122	Cotton hand Gloves 8”
123	S.S Wire brush 5 rows and 3 rows
124	Safety boots for welders Size 7,8,9,10
125	Leg guards leather
126	Rubber hose oxygen 8 mm dia X 10 Mtr. long as per BIS
127	Rubber hose acetylene 8 mm dia X 10 Mtr. long as per BIS
128	Arc welding single coloured glasses 108 mm x 82 mm x 3 mm. DIN 11A &12 A
129	Arc welding plain glass 108 mm x 82 mm x 3 mm.
130	Gas welding Goggles with Colour glass 3 or 4A DIN
131	Safety goggles plain
132	AG 4 Grinding wheels
133	Earth clamp 600A
134	Electrode holder 600 amps
135	Die penetrant testing kit
136	Anti spatter spray can 100 to 300 ml
137	GMAW Torch nozzle tip Size 0.8, 1.0, 1.2 (in mm)
138	TIG welding torch ceramic nozzle Size 3,4,5,6,8
139	Tungsten electrode 1.0, 1.6, 2.0 (in mm), length 150 mm
140	AG4 cutting wheels
141	CCMS filler wire 1.0 mm
142	Brass filler wire 1.0 mm
143	Copper filler wire 1.0 mm
144	Flux for Brass
145	Flux for Copper
146	Instructor’s table and Chair (Steel)
147	Students chairs with writing pads
148	Instructor’s laptop with latestconfiguration pre-loaded with operating system and MS Office package.
149	LCD projector with screen.
150	77 "Inch Diagonal Interactive Flat Pannel Display, Smart Board For Education Power Consumption 220-300 w Finger touch Short panel of both side