Tender For Waiting Room Near Gp Office. (Activity Id-45519914) Under Basanti Gram Panchayat, Basanti Dev Block. J.L No-166, Basanti
Tender Value
3.28 Lakhs
Estimated cost
Bid Submission
10 Mar 2023
0 days left
EMD
7000
Bank guarantee accepted
Document Fee
750
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
basanti → West Bengal
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Waiting Room Near Gp Office. ( Activity Id-45519914 ) Under Basanti Gram Panchayat, Basanti Dev Block. J.L No-166, Basanti
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in excavation of foundation trenches or drains, in all sorts of soil (including mixed soil but excluding laterite or sandstone) including removing, spreading or stacking the spoils within a lead of 75 m. as directed. The item includes necessary trimming the sides of trenches, levelling, dressing and ramming the bottom, bailing out water as required complete.a)Depth of excavation not exceeding 1500 mm.Footing. |
| 2 | Earth work in filling in foundation trenches or plinth with good earth, in layers not exceeding 150 mm. including watering and ramming etc. layer by layer complete. (Payment to be made on the basis of measurement of finished quantity of work(a) With earth obtained from excavation of foundation.) |
| 3 | (B) Filling in foundation or plinth by fine sand in layers not exceeding 150 mm as directed and consolidating the same by thorough saturation with water, ramming complete including the cost of supply of sand. (payment to be made on measurement of finished quantity) |
| 4 | Single Brick Flat Soling of picked jhama bricks including ramming and dressing bed to proper level and filling joints with local sand . |
| 5 | Cement concrete with graded jhama khoa (30 mm size) excluding shuttering Ground floor and foundation |
| 6 | Brick work with 1st class bricks in cement mortar (1:6) (a) In foundation and plinth |
| 7 | 125 mm. thick brick work with 1st class bricks in cement mortar (1 :4) in ground floor. |
| 8 | Ordinary Cement concrete (mix 1:1.5:3) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement if any, in ground floor as per relevant IS codes.Conc. Pole |
| 9 | 25mm. thick damp proof course with cement concrete with stone chips (1:1.5:3) [with graded stone aggregate 10 mm nominal size] and admixture of water proofing compound as per manufacturer\"s specification followed by two coat of polymer based paint, (1st coat after 4 to 5 days of concrete laying and 2 nd coat just before brick masonry work) as directed (cost of water proofing compound & polymer basedpaint to be paidseparately).!Chequering not required over concrete or painted surface). [Note: - Waterproofing as per item NO 60, polymer based paint as per item 59 (a) of Section (C). |
| 10 | Reinforcement for reinforced concrete work in all sorts of structure including distribution bars stirrups, binders etc including supply of rods intials straightening and removal of loose rust ,cutting to requisuite length hooking bending to correct shape placing in proper position and binding with 16 gauge black annealed wire at every intersection complete ass per drawing and direction |
| 11 | Hire and labour charges for shuttering with centering and necessary staging upto 4 m using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, beams and columns, lintels curved or straight including fitting, fixing and striking out after completion of works (upto roof of ground floor) |
| 12 | Artificial stone in floor, dado, staircase etc with cement concrete (1:2:4) with stone chips, laid in panels as directed with topping made with ordinary or white cement (as necessary)and marble dust in proportion (1:2) including smooth finishing and rounding off corners including raking out joints or roughening of concrete surface andapplication of cement slurry before flooring works using cement @ 1.75 kg/sq.m all complete including all materials and labour. In ground floor. 3 mm. thick topping (High polishing grinding on this item is not permitted with ordinary cement). Using grey cement (i) 25 mm. thick |
| 13 | Plaster (to wall, floor,ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging wherenecessary(Groundfloor). [Excludingcostof chipping over concrete surface] (i) With 1:6cement mortar.(c) 15 mm thick plaster |
| 14 | Plaster (to wall, floor,ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging wherenecessary(Groundfloor). [Excludingcostof chipping over concrete surface] (i) With 1:6cement mortar.b)20 mm thick plaster:- |
| 15 | Plaster (to wall, floor,ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging wherenecessary(Groundfloor). [Excludingcostof chipping over concrete surface] (i) With 1:6cement mortar.b)10 mm thick plaster:- |
| 16 | Neat cement punning about 1.5 mm. thick in wall, dado, window, sills, floor, drain etc. NOTE : Cement 0.152 cu.m. per 100 sq.m. |
| 17 | (a) M.S.or W.I. Ornamental grill of approved design joints continuously welded with M.S, W.I. Flats and bars of windows, railing etc. fitted and fixed with necessary screws and lugs in ground floor. (Add extra @ 1% for each addl. floor upto 4th floor and @ 1 .25% for each addl. floor above 4th floor) (i)Grill weighing above 10 Kg./sq.mtr and up to 16 Kg./sq. mtr. |
| 18 | Wood work in door and window frame fitted and fixed in position complete including a protective coat of painting at the contact surface of the frame exluding cost of concrete, Iron Butt Hinges and M.S clamps. (The quantum should be correted upto three decimals). (d) Sal:local |
| 19 | Z-batten shutters of door and window as per design havings tongued and groove-half lap jointed as per direction of the Engineer-in-Charge including fitting and fixing shutter in position, but excluding the cost of hinges and other fittings in ground floor.for door & Window |
| 20 | Supplying, fitting and fixing M.S. clamps for door and window frame made of flat bent bar, end bifurcated with necessary screws etc. by cement concrete(l:2:4) as per direction. (Cost of concrete will be paid separately) [a) 40mm X 6mm, 125mm Length. |
| 21 | Iron butt hinges of approved quality fitted and fixed with steel screws, with ISI mark. (vii)100mm x58 mmx1.9 mm |
| 22 | Iron socket bolt of approved quality fitted and fixed complete . |
| 23 | i) Iron hasp bolt of approved quality fitted and fixed complete (oxidised) with 16mm dia rod with centre bolt and round fitting. |
| 24 | |A) Iron door ring of approved quality fitted and fixed with nut and washer complete. ii) 50mm dia. |
| 25 | Anodised aliminiumD-type handle of approved quality manufactured from extruded section conforming to I.S. specification (I.S. 230/72) fitted and fixed complete: (a) With continuous plate base (Hexagonal / Round rod) |
| 26 | White washing including cleaning and smoothening surface thoroughly. All floors : |
| 27 | Applying decorative cement based paint of approved quality afterpreparing thesurfaceincluding scraping thesame thoroughly(plasteredorconcretesurface)asper manufacturer\"s specification. In Ground floor: |
| 28 | (a)priming one coat on timber or plastered surface etc. |
| 29 | (b) priming one coat on steelmetal surface with synthetic Oil bound primer ec. |
| 30 | Painting with best quality synthetic enamel paint etc. a) On timber or plastered surface with other than hi- gloss of approved quality. |
| 31 | Painting with best quality synthetic enamel paint etc. b) On steel or other metal surface with other than hi- gloss of approved quality. |
| 32 | Supplying, fitting, fixing UPVC rain water down pipe |
| 33 | Supplying , fitting fixing i)600mm x450mm size marbleplate engraving the same of CFCG etc as directed including necessary earth work, brick work , plastering, neat cement complete. |
| 34 | ii)Photo taking charge (3 copies). |
| 35 | G.S.T@18% |
| 36 | LWC |
AI Tender Summary
Tender Timeline
Mar 03, 2023
11:30 IST
Tender Published
Tender notice published.
CompletedMar 10, 2023
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedMar 13, 2023
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender