Tender For Renovation Of Different Electrical Works In At Government Iti-Hingalganj, Project Id Et222368768s000
Tender Value
Ref. Documents
Estimated cost
Bid Submission
21 Mar 2023
0 days left
EMD
38000
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
hingalganj → West Bengal
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Renovation Of Different Electrical Works In At Government Iti-Hingalganj, Project Id Et222368768s000
BOQ
| Sl. No. | Item Description |
| 1 | Supply & delivery of cubical type LT distribution panel board ofsuitable size floor cum wall mounted compartmentalized with ample arrangement having rigid & self supporting structure fabricated from 2mm thick CRCA sheet steel with M.S angle frame. The panel board consisting of the following switches.lncoming arrangment: i) Switch disconnect or fuse (panel mounting cubical type) confirm IS 13947 in open executon three pole & neutral 50Hz 415V 250 A main switch with 3 no 250 A Din type HBC fuse link (L & T Makes FN type)ii) S/F 415V, 160A on load change over switch 4pole, make L&T)-1noiii) Busbar Section - 500V, 300A electrolyte type grade tinned copper busbar with vertical section of size 26 X 6 mm for phase RYB. &25 x 6 mm for neutral bus &20 x 5 mm tinned copper for earth. A bus bar shall be fixed with FRP chair & the entire bars are insulated with PVC heat sinkable sleeve of suitable size & colour as per direction of EIC- 1 set. |
| 2 | Outgoing Arrangement :i) Switch disconnect fuse(panel mounting) confirm to IS:13947 in open execution three pole & neutral 50hz ,415V , 100A main switch with 3nos 100A DIN type HBC fuse link (L & Tmake FN type)-1 nos.ii) Switch disconnect fuse (panel mounting) confirm to is 13947 in open execution three pole & neutral 50Hz 415V 160 A main switch with 3nos 160A DIN type HBC fuse link (L&T make Fn type)-6 no.iii) Switch disconnect fuse (panel mounting) confirm is 13947 in open execution three pole & neutral 50Hz 63A main switch with 3nos 63A DIN typeHBC fuse link (L & T make Fn type)-1 noMetering panel:-a) S/F 0-500V voltmeter (Square type) AE make with selector switch.b) S/F 0-250A Ammeter (square type) AE make with selector switch. and 3 Nos 200;5 a CT coil. c) S/F indicator LED RYB with 3 Nos sliding fuse unitd) S/F of danger board |
| 3 | Supplying and fixing 415V, TPN SFU with sheet steel enclosure on flat iron/angle iron frame on wall with nuts bolts etc incl. S & F 3 nos. DIN type HRC fuse as per rating.250A(L&T)(At Electrical panel room ) |
| 4 | Installation ofcubical type LTPanel on brick chamber , the chamber size 1.5 mtr X 1mtrs X 0.750 mtrs the chamber finished by plaster & Net ciment as per required , carriage within a lead of 30 mtr. By placing in position assembling lining up levellingand fixing on floor fitting & checking all instruments,correctly set according to requirement the work has been doneas per direction of EIC. |
| 5 | Supplying and fixing 415 V , 125 A Four Pole MCCB of Breaking capacity 25kA/35kA with fixed thermal and fixed magnetic / adjustable thermal and fixed magnetic setting in existing DBs / enclosure and necessary connection. (seimens/ABB/L&T/LEGRAND) |
| 6 | Supplying and fixing double door 8way Vertical TPN MCB Distribution board(160A) for MCCB incomer with IP-42/43 protection, on angle iron frame on wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment. (seimens/ABB/L&T/LEGRAND)--- |
| 7 | Supplying and fixing 240/415 V MCB of Breaking capacity 10kA & C characteristics on din rail of existing DBs and necessary connection.(Legrand/Scneider/L&T) |
| 8 | 32A TP,415V |
| 9 | 63A TP, 415V |
| 10 | Distribution wiring in 2 x 22/0.3 (1.5 sqmm) single core stranded \"FR\" PVC insulated & unsheathed copper wire (Brand approved by EIC) in 20mm size PVC rigid conduit \"FR\"(Precision make), with 1x22/0.3 (1.5 sqmm) single core stranded \"FR\" PVC insulated & unsheathed copper wire for ECC, to light/fan/call bell points with modular type switch fixed on G I Modular sheet metal (16 SWG) switch board cum JB on wall complete with 2 no. suitable size “Ph & N” copper bar incl. modular (wall matching color) top cover 3 mm thick and incl. 175mm x100mmx65mm inspection box, making earthing attachment, painting the MS box andmending good the damages to original finish(PVC rigid conduit on ceiling and remaining portion consealed)avg run 6 mtr |
| 11 | Distribution wiring in 1.1 KV grade 22/0.3 (1.5 sqmm) single core stranded \"FR\" PVC insulated & unsheathed copper wire (Brand approved by EIC) in 20mm size PVC rigid conduit \"FR\" (Precision make), with 1.1 KV grade 1 x 22/0.3 (1.5 sqmm) single core stranded \"FR\" PVC insulated & unsheathed copper wire as ECC, to 6A 3 pin Modular type plug socket & switch (Brand approved by EIC) on 4 Module GI switch board with3/4 Module top cover plate on wall incl. necy. connection making earthing attachment, painting and mending good damages to building worksOn Board |
| 12 | Distribution wiring in 1.1 KV grade 22/0.3 (1.5 sqmm) single core stranded \"FR\" PVC insulated & unsheathed copper wire (Brand approved by EIC) in 20mm size PVC rigid conduit \"FR\" (Precision make), with 1.1 KV grade 1 x 22/0.3 (1.5 sqmm) single core stranded \"FR\" PVC insulated & unsheathed copper wire as ECC, to 6A 3 pin Modular type plug socket & switch (Brand approved by EIC) on 4 Module GI switch board with3/4 Module top cover plate on wall incl. necy. connection making earthing attachment, painting and mending good damages to building works Avg run 4.5 mtr |
| 13 | Supply & Fixing 240 V, 6 A, 3 pin Modular type plug socket (Brand approved by EIC) with 6A Modular type switch, without plug top on 4 Module GI Modular type switch board with 3 Module top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc. |
| 14 | Supply & Fixing 240 V, 16/20 A, 3 pin Modular type plug socket (Brand approved by EIC) with 16/20A Modular type switch, without plug top on 4 Module GI Modular type switch board with top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc |
| 15 | Supply & Fixing 240 V, 3 nos. 6A, & 1 no. 20A plug socket with separate 3 nos. 6 A & 1 no. 20A Piano key type switch, indicator & 20A switch type SP MCB (Brand approved by EIC) on sheet metal switch board embedded in wall incl. S & F 240x200x65mm MS (16SWG) switch board and bakelite/perspex top cover of 3mm thick by Brass screws aftermaking housing for switch by cutting bakelite/perspex cover and making necessary connections as required |
| 16 | Supply & Fixing 240 V, 25 A, Modular type starter (Brand approved by EIC) with 25A Modular switch type DP MCB (C Curve) and 4 Module GI Modular type switch board with 4 Module top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc. |
| 17 | Supply & Fixing 240 V, 25 A, 3 pin Modular type plug socket (Brand approved by EIC), without plug top and switch with 2 Module GI Modular type switch board with top cover plate flushed in wall and making necy. connections with PVC Cu wire and earth continuity wire etc |
| 18 | Supplying & Fixing Industrial Plug & Socket board with 415 V, 30A, TPN & Earth Metal Industrial Plug socket & 30A Industrial top incl. S&F 32 A TPN/FP MCB breaking capcity 10kA (C- Curve) in SS enclosure fixed on wall and cecessary conection make- legrand/L&T |
| 19 | Distribution wiring in 1.1 KV single core stranded \"FR\"PVC insulated & unsheathed copper wire (Brandapproved by EIC) in 20mm size PVC rigid conduit \"FR\"(Precision make) incl. necy. fittings as required |
| 20 | i)2 x 22/0.3 (1.5 sqmm) + 1 x 22/0.3 (1.5 sqmm) ECC |
| 21 | ii)2 x 36/0.3 (2.5 sqmm) + 1 x 22/0.3 (1.5 sqmm) ECC |
| 22 | iii)2 X 56/0.3 (4 sqmm) + 1 x 36/0.3 (2.5 sqmm) ECC |
| 23 | iv)2 x 84/0.3 (6 sqmm) + 1 x 56/0.3 (4 sqmm) ECC |
| 24 | v)2x80/0.4 (10 sqmm) + 1x84/0.3 (6 sqmm) as ECC |
| 25 | Distribution wiring in 1.1 KV single core stranded \"FR\"PVC insulated & unsheathed copper wire (Brandapproved by EIC) in 25mm size PVC rigid conduit \"FR\"(Precision make) incl. necy. fittings as required(for three phase industrial plug) |
| 26 | i)4 x 56/0.3 (4 sqmm) + 2 x 36/0.3 (2.5 sqmm) ECC |
| 27 | ii)4 x 84/0.3 (6 sqmm) + 2 x 56/0.3 (4 sqmm) ECC |
| 28 | iii)4x80/0.4 (10 sqmm) + 2x84/0.3 (6 sqmm) as ECC |
| 29 | Finishing of the PVC insulated wire ends by socketting with pin/ ring type copper sockets and insulated tapes etc., including supplying sockets, tapes. |
| 30 | 2.5 sqmm |
| 31 | 4 sqmm |
| 32 | 6 sqmm |
| 33 | 10 sqmm |
| 34 | Supply & Delivery of1.1 KV.Gr. 4 core 70 sq. mm. PVC Armoured Al Cable.(for main incomer kitkat fuse to panel/ Main switch) (Make:RR/Gloster/Havells/Polycab)(from electrical panel room to workshop building) |
| 35 | Supply & Delivery of1.1 KV.Gr. 2 core 10 sq. mm. PVC Armoured Al Cable.(for compound light 16 nos.)(Make:RR/Gloster/Havells/Polycab)(for compound lights) |
| 36 | Laying of one No. cable 70 sqmm inunderground trench 460mm wide x 760mm average depth, withbrick protection on the top of the cable with 8 (eight) Nos. bricksper Mtr. including filling the space between the bricks and cableand also the trenchwith shifted soil, leveling up and restoringsurface duly rammed |
| 37 | Laying of one No. cable 10 sqmm in underground trench 460mm wide x 760 mm average depth, with brick protection on the top of the cable with 8 (eight) Nos. bricks per metre, including filling the space between the brick & cable and also the trench with shifted soil, leveling up and restoring surface duly rammed |
| 38 | Supplying and fixing compression type gland complete with brassgland, brass ring & rubber ring for dust & moisture-proof entry ofXLPE/PVC armoured cables as below : |
| 39 | 4 core 70 sqmm |
| 40 | 1 core 10 sqmm |
| 41 | Finishing the end of following XLPE/PVC armoured cables bycrimping method incl. supplying and fixing solderless socket(Dowels make), tapes, anticorrosive paste & jointing materials : |
| 42 | 2 core 10 sqmm cable |
| 43 | 4 core 70 sqmm |
| 44 | Supply & delivery of 4ft20 watt Double LEDtube light fittings complete with all accessories. Including S&F 2x20watt master LED tube poly carbonate body [Philips/Cromptom/Wipro make] |
| 45 | Supply & delivery of 4ft20 watt SingleLEDtube light fittings complete with all accessories .Including S&F 1x20watt master LED tube poly carbonate body [philips/Cromptom/Wipro make] |
| 46 | Fixing only single/twin fluorescent light fitting suspended 25 cm bellow the ceiling with 2 No. 20 mm dia EI conduit (14 SWG) supports fixed with “L” type MS clamp whose one side fixed on ceiling with sutable size 4 nos. fastener and other side connected with the conduit with suitable size of bolts and nuts incl. S&F EI conduit, “L” type (125mmx125mm) 6mm thick and 25mm with MS clamps and connecting the length of PVC insulated wire and mending good damages to original finish and painting etc. by 2x24/0.20 mm (1.5sqmm.) flexible copper wire of 1.10 mt. length. |
| 47 | Fixing only single /twin fluorescent light fitting complete with all accessories directly on wall/ceiling/HW round block and suitable size of MS fastener |
| 48 | S&F bulk head light fitting (Make-Wipro/Crompton/Philips make) with die cast aluminium housing & frosted glass on wall/ceiling incl. S&F 12watt LED complete set.(Philips Vista Glow cat-WT140W LED7S CW PSU S1 PC) |
| 49 | Supplying & Fixing 240 V AC call bell push (Make :- Anchore, Havelles, C&S,Goldmedal or approved by the EIC. ) on HW board incl. S&F HW board. |
| 50 | Supply & Fixing angular batten holder (Anchor) on 75mm dia PVC round block / round bakelite on wall/ceiling with S & F12 watt LED lamp [Make-Philips /Crompton/Mazik] |
| 51 | S& F 09\"\" sweep (1370 rpm) metal bodyAC Exhaust fan after making hole in wall and making good damages and smooth cement finish etc. as practicable as possible and providing necy. length of PVC insulated wire and making connection for exhaust also fixing louver shutter/cowl on wall with necy. bolts & nuts (6 mm dia x 62 mm long) (Make: EPC Heavy duty/crompton) |
| 52 | S & F 12\",1420 rpm metal bodyAC Exhaust fan after making hole in wall and making good damages and smooth cement finish etc. as practicable as possible and providing necy. length of PVC insulated wire and making connection for exhaust also fixing louver shutter/cowl on wall with necy. bolts & nuts (6 mm dia x 62 mm long) (Make: EPC Heavy duty/crompton) |
| 53 | S & fixing of AC ceiling fan of below size complete with all accessories but without regulator as per GS (Crompton Greaves/Usha/Orient Quasar) |
| 54 | i)48\" |
| 55 | ii)36\" |
| 56 | Supply & Fixing 240V, Modular Socket (2 Module) type fan regulator (Step type) (Brand approved by EIC) on existing Modular GI switch board with top cover plate incl. making necy. connections etc |
| 57 | S & fixing of compound light on existing pole with all accessories incl. Complete Job as per EIC of below wattage:- 72-80 watt(as per EIC)(Philips/Crompton/Mazik) |
| 58 | Supplying & Fixing GI waterproof type looping cable box size 200x150x100 mm deep having 4 mm thick comprising of one 250 V 15 A kit-kat fuse unit, one NL on porcelain insulator, one compression type brass cable gland for upto 2- core 16 sqmm PVC/A cable and having lined with rubber gasketted GI top cover with brass machine screws etc., earthing terminal with lug, on steel tubular pole near base, including S&F 40x6 mm thick, MS clamps with bolts, nuts etc. including painting with anticorrosive paint |
| 59 | Fixing only outdoor / street light type fluorescent light fitting complete with all accessories to be fixed/projected from the wall of the building incl. making holes to building, S&F 40 mm dia GI pipe (ISI-Medium) 1.50 mts. average length, with GI socket at one end and thread at the other end & suitable bend to house the fitting & making necy. connections with S&F necy. length of 1.5 sqmm PVC insulated single core stranded annealed copper wire and making connections as required and mending good damages to wall and painting. |
| 60 | Lightning Conductor:S&F Lightning Conductor Air Terminal made of 15 mm dia 1500 mm long Gi pipe (ISI medsium) having five discharge prongs of 4 SWG GI (Hot dip) wire at top duly soldered with 7/16 strandede GI (hot dip) wire and 85 mm dia 6mm thick Gi base plate at bottom including necy. hole etc. complete duly grouted on the parapet etc. in CC Mortar 4:2:1 (for administrative block and workshop block) |
| 61 | S& F GI hot dip strip 20mmX3mm thick for horizontal run on the parapet or roof or wall with Gi Saddles 1100mm apart incl. mending good the damages to building works |
| 62 | S& F GI hot dip strip 20mmX3mm thick for vertical run on thewall with GI saddles spaced not exceeding 1100mm apart incl. mending good the damages to building works |
| 63 | Making soldered joints between conductors,conductors and air terminals for 4 SWG GI (Hot dip) wire incl. supply of jointing materials and painting with 2(two) coats of bituminous paint |
| 64 | Hiring charges for scaffolding arrangement including dismantling at the end of work and carriage, for LC installation, per storey of building per vertical run(3 storey building 08 nos. earthing) |
| 65 | Earthingwith50mmdiaGIpipe3.64mmthickx3.04Mts. long and 1 x 4 SWG GI (Hot Dip) wire (4 Mts. long), 13 mm dia x 80 mm long GI bolts, double nuts, double washers incl. S & F 15 mm dia GI pipe protection (1 Mts. long) to be filled with bitumen partly under the ground level and partly above ground level driven to an average depth of 3.65 Mts. below the ground level as belowBy TATA-Medium GI pipe (08 nos for LC and 02 nos. for EI) |
| 66 | Supplying & fixing 40 mm diamedium gauge GI pipe (ISI - medium)protection with necy. Fittings and jointing materials as reqiuired |
| 67 | Extra for providing masonary enclosure on the top of the earth electrode of overall size 86.36cm X86.36cmX46cm deep(below ground level) complete with cemented brick work (1:6) of 25 cm width duly plastered with cement morter (inside)CI hingedinspection cover of size36.56cmX35.56cm with locking arrangement ,GI reducer including drilling of 46 nos. 12 mm dia holes on the GI pipe |
| 68 | Supply& fixing of testing joints by 20mmX3mm thick GI(Hot Dip)strip 125mm long grouted on wall having clearance of 6 mm from wall for making connection with thimble at the end of 7/10 SWG GI (Hot Dip) stranded wire and 4 SWG GI (Hot Dip)wire of vertical conductor and conductor from earth electrode complete withy S&F thimbles,GI bolts,nuts,check nuts ,spring washers etc. as required |
| 69 | SITC of LED illumination sign board fabricated by 20’×5’ (ft) × 4” (inch) depth ACP box supported with 1\"×1\" MS hollow square pipe of 18 swg all around. The 3 mm ACP facial should be provided with Laser cutting 6 mm thick acrylic letters out of which 3 mm rising from the surface of the ACP board. 6 mm letters should be fixed on another 3 mm acrylic sheet on back side of the ACP facial. Border line of the front portion and back portion should be covered by 1.5” Aluminum channel as per the direction of EIC. The sign board should be glow from back side of letters by 1.5W/2.0 LED 2/ 3 / 4 module cool white in colour including 12V 250W power supply and LED must be covered in box made of 3 mm thick sun board. 4” with part of the four side of board should be covered by ACP after bending excess part from front side. Back side of the board should be covered with 22 swg AIu. sheet protect rain water. The sign board should be fixed on existing position of the premises with suitable supporting arrangement on wall and mending good damages as per direction of EIC. Colour of APC & letter will be as per direction of EIC. The cost of transportation and scaffolding charges are included. The sign board should be as per the following inscription as per direction of EIC – Probably to be provided (I) national emblem. (II) State logo. etc. beside these the probable (actual as per authority approval)matter would be as follows:- GOVERENMENT INDUSTRIAL TRAINING INSTITUTEHINGALGANJ;sarkarisilpa prasikhan pratisthanHINGALGANJ;RUNNINGUNDER PTP (PTP );HINGALGANJ NORTH-24_Parganas PIN-743435 (with 02 nos. LOGO)Govt. Of W.B. |
| 70 | Supply and delivery of 40mmX40mmX6mm GI angle (considering 1 mtr angle weight 3.5 kg)--& 25mmX25mmX3 mm GI angle for LED light support.(considering 1 mtr angle weight 2.10 kg) |
| 71 | Fixing of MS angle structure 40mmX40mmX6mm or 25mmX25mmX6mm angle by welding methodas per EIC with incl. electrode necy all accessories. |
| 72 | providing CC (6:3:1) base block (around the pole) dimension 0.45x0.45x0.60mt. above ground level, neatly cemented finish (3 mm thick), at the base pole (in lieu of CC muffing) suitable for alkathene/ polythene pipe entry as directed for street light wiring, incl. S & F 20cmx15cmx10cm GI Loop box, 16SWG & incl. drilled hole in pole.(for gate sign board structure support) |
| 73 | Painting of Steel Tubular Pole of lengths and no. of coats of paint,as given below with ready mixed paint/primer of approved make, and brand incl. preparation of surface by sand paper/emery paper, cleaning etc. for receiving fresh coat of paint Upto 9.0 mtr. long pole (i) 1st coat of aluminium paint over 1 coat of RO priming. (ii) 2nd coat of aluminium paint over 1st coat |
| 74 | Dismantling the existing wiring, PBDB, SPNDB, main switch, Tube fittings, Ceiling Fan, different size cables and wire etc. and mending goods the damages to original finish and supply to store, also replacing old accessories as per direction of site engineer. |
| 75 | (Rates should be Quoted inclusive ofall taxes & duities ) |
AI Tender Summary
Tender Timeline
Mar 03, 2023
11:30 IST
Tender Published
Tender notice published.
CompletedMar 21, 2023
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedMar 23, 2023
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender