Military Engineer Services-MES has published Tender For Repair/Maintenance Of Dg Set, Amf Panel, Street Light And Allied Works At Water Supply Installations, Sspl And Zone B Under Ge (I) Rnd Delhi. Submission Date for this Tender is 21-03-2023. Diesel Generators Tenders in delhi Delhi. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | M&L for B check general servicing by authorised rep of manufacturer of DG set of capacity 62.5 KVA, replacement of oil filter, fuel filter, air filter, by pass filter cleaning of radiator with chemical afterdraining out engine/ lubrication oil, coolant flushing and cleaning of oil chamberafter opening of tappet cover/ top cover tappet clearence setting injector timing adjustment re-affixing of tappet/ top cover including replacement of tappet cover packing set, bonding and leak proof solution, oil pan/ chamber gasketat the servicing and other work comes under B Check service as mentioned in B Check by the manufacturer complete all as specified and directed. Note-Engine oil & Coolant will be paid separately under respective item. |
| 2 | All as per Ser item No 1.00 but of capacity 75 KVA |
| 3 | All as per Ser item No 1.00 but of capacity 200 KVA |
| 4 | All as per Ser item No 1.00 but of capacity 250 KVA |
| 5 | All as per Ser item No 1.00 but of capacity 320 KVA |
| 6 | All as per Ser item No 1.00 but of capacity 625 KVA |
| 7 | M&L in repair of self starter 12 V including rewinding of armature with super enamaled copper conductor wire of superier quality as per existing gauge, turn and pattern and replacement of bendex drive, carbon brush including services suitable for DG set 15 KVA to 20 KVA complete all as specified and directed. |
| 8 | M&L in repair self starter 24 V including rewinding of armature with super enamaled copper conductor wire of superier quality as per existing gauge, turn and pattern and replacement of bendex drive, carbon brush including services suitable for DG set 160 KVA complete all as specified and directed. |
| 9 | M&L in repair for self starter 12 V including rewinding of armature with super enameled copper conductor wire of superier quality as per existing gauge, turn and pattern and replacement of bendex drive, carbon brush including services suitable for DG set 62.5 to 100 KVA complete all as specified and directed. |
| 10 | M&L in repair for self starter 24 V including rewinding of armature with super enameled copper conductor wire of superier quality as per existing gauge, turn and pattern and replacement of bendex drive, carbon brush including services suitable for DG set 200 to 625 KVA complete all as specified and directed. |
| 11 | S&F in replacement automatic battery charger with auto cut OFF suitable for charging of 2X12V, 180AH batteries complete with all required necessary wiring complete all as specified and directed. |
| 12 | M&L in repair AMF panel DG set 15 KVA to 62.5 KVA including replacement ofwiring of interlock system of AMF panel with suitable size of copper wiring including proper connection and testing complete all as specified and directed. |
| 13 | M&L in repair AMF panel of DG set 70 KVA to 160 KVA including replacement ofwiring of interlock system of AMF panel with suitable size of copper wiring including proper connection and testing complete all as specified and directed. |
| 14 | M&L in repair AMF panel of DG set 200 KVA to 450 KVA including replacement ofwiring of interlock system of AMF panel with suitable size of copper wiring including proper connection and testing complete all as specified and directed. |
| 15 | M&L in replacement wiring complete to AMF panel for any capacity of DG set includinginterlock system of AMF panel with existing size of copper wiring including proper connection and testing complete all as specified and directed. |
| 16 | S&F in replacement self starter 24 volts suitable for upto 160 KVA DG sets complete all as specified and directed. |
| 17 | S&F in replacement self starter 24 volts suitable for upto 200 to 320 KVA DG sets complete all as specified and directed. |
| 18 | S&F in replacement self starter 24 volts suitable for 437.5 to 625 KVA DG sets complete all as specified and directed. |
| 19 | S&F in replacement battery brass terminals heavy duty suitable upto12V, 180 AH battery with minimum 2 RM Battery Lead of copper Cable single core complete all as specified and directed. |
| 20 | S&F in replacementengine starting relay suitable for DG set of capacity 15 KVA to 20 KVA as per matching to existing complete all as specified and directed. |
| 21 | S&F in replacementengine starting relay suitable for DG set of capacity 160 KVA as per matching to existing complete all as specified and directed. |
| 22 | S&Fin replacement relay, 24 V 8 pin type as per matching to existing and properly connection and testing after completion complete all as specified and directed. |
| 23 | S&F in replacement engine starting relay suitable for DG set of capacity 62.5 KVA to 100 KVA as per matching to existing complete all as specified and directed. |
| 24 | S&F in replacement engine starting relay suitable for DG set of capacity 200 to 625 KVA as per matching to existing complete all as specified and directed. |
| 25 | S&F in replacement Electronic timer suitable for AMF panel of DG setof capacity 625 KVA as per matching to exisitng, 230 V AC 50 Hz complete all as specified and directed. |
| 26 | S&F in replacement Electronic timer suitable for AMF panel of DG set 62.5 KVA to 100 KVA as per matching to exisitng, 230 V AC 50 Hz complete all as specified and directed. |
| 27 | S&F in replacement Electronic timer suitable for AMF panel of DG set 160 KVA as per matching to exisitng, 230 V AC 50 Hz complete all as specified and directed. |
| 28 | S&F in replacement Electronic timer suitable for AMF panel of DG set 320 KVA as per matching to exisitng, 230 V AC 50 Hz complete all as specified and directed. |
| 29 | S&F in replacement Electronic timer suitable for AMF panel of DG set 437.5 KVA as per matching to exisitng, 230 V AC 50 Hz complete all as specified and directed. |
| 30 | S&F in replacement Voltmeter analog type for voltage range of (0-24V) as per matching to existing with all accessories and wiring complete all as specified and directed. |
| 31 | S&F in replacementVoltmeter analog type for voltage range of (0-500V)with all accessories and wiring complete all as specified and directed. |
| 32 | S&F in replacementAmmeter analog type for current range of (0-24Amps) as per matching to existing with all accessories and wiring complete all as specified and directed. |
| 33 | S&F in replacementAmmeter analog type for current range of (0-1000Amps) as per matching to existing with all accessories and wiring complete all as specified and directed. |
| 34 | S&F in replacementpower contactor ML 6 suitable for AMF panel of DG sets a per matching to existing complete all as specified and directed. |
| 35 | S&F in replacementpower contactor ML 4 suitable for AMF panel of DG sets a per matching to existing complete all as specified and directed. |
| 36 | S&F in replacement power contactor ML 3 suitable for AMF panel of DG sets a per matching to existing complete all as specified and directed. |
| 37 | S&F in replacement power contactor ML 2 suitable for AMF panel of DG sets a per matching to existing complete all as specified and directed. |
| 38 | S&F in replacement selector switch suitable for voltmeter and Ammeter complete all as specified and directed. |
| 39 | S&Fin replacement under voltage relay suitable for DG set upto 320 KVA as per sample complete all as specified and directed. |
| 40 | S&F in replacement of under voltage relay suitable for DG set of capacity 62.5 KVA to 100 KVA complete all as specified and directed |
| 41 | S&Fin replacement complete wiring with single core multistranded copper cable with flexible conduit 20mm dia for DG set of various capacities complete all as specified and directed. |
| 42 | Supply, fixing and testing Electronic Governor Controller for 200 to 625 KVA DG Set including taking down old Governor Controller complete all as specified and directed. |
| 43 | S&F new actuator for upto 625 KVA DG Set complete including taking down old actuator from its position complete all as specified and directed. |
| 44 | Opening the DG set of 200 to 320 KVA , repair to any leakage in radiator, greasing of all movable parts & equipments and replacing allflexible/steel wire mesh type hose pipes including fuel pipe line ,belts & Bearings including re-assembling the complete Parts and Testing complete all as specified and directed. Note:- Spare parts required for replacement shall be measured and paid separately under respective items. |
| 45 | S&F Piston ring and liner for 200 to 320 KVA DG Setas per existing sample complete all as specified and directed. |
| 46 | Supply only Head valve, Head Guide, Head sheet & Head seal for 200 to 320 KVA DG Setas per existing complete all as specified and directed. |
| 47 | Supply only Injector sleeves & Head gasket for 200 to 320 KVA DG Setas per existing make complete all as specified and directed. |
| 48 | Supply only Packing Kit for 200 to 320 KVA DG Setas per existing complete all as specified and directed. |
| 49 | M&L in repair for Head and fuel injector assembly complete for 200 to 320 KVA complete all as specified and directed. |
| 50 | M&L in repair for Turbo assembly completefor 200 to 320 KVA complete all as specified and directed. |
| 51 | Opening the DG set of 625 KVA , repair to any leakage in radiator, greasing of all movable parts & equipments and replacing allflexible/steel wire mesh type hose pipes including fuel pipe line ,belts & Bearings including re-assembling the complete Parts and Testing complete all as specified and directed. Note:- Spare parts required for replacement shall be measured and paid separately under respective items. |
| 52 | S&F Piston ring and liner for 625 KVA DG Setas per existing complete all as specified and directed. |
| 53 | Supply only Head valve, Head Guide, Head sheet & Head seal for 625 KVA DG Setas per existing complete all as specified and directed. |
| 54 | Supply only Injector sleeves & Head gasket for 625 KVA DG Setas per existing complete all as specified and directed. |
| 55 | Supply only Packing Kit for 625 KVA DG Setas per existing complete all as specified and directed. |
| 56 | M&L in repair for Head and fuel injector assembly complete for 625 KVA complete all as specified and directed |
| 57 | M&L in repair for Turbo assembly completefor 625 KVA complete all as specified and directed. |
| 58 | Supply andFix Fan belt of existing size for DG Set of capacity 62.5 to 200 KVA including taking down old unserviceable fan belt complete all as specified and directed. |
| 59 | Supply andFix Fan belt of existing size for DG Set of capacity 250 to 320 KVA including taking down old unserviceable fan belt complete all as specified and directed. |
| 60 | Supply and Cladding with glass/rock wool and aluminium sheets of exhaust manifoldfor DG sets 437.5 to 625 KVA includung removing of existing asbestos rope or any other type of insulation complete all as specified and directed. |
| 61 | S&F in replacement fly wheel ring of DG Set of capacity upto 62.5 KVA complete all as specified and directed. |
| 62 | S&F in replacement fly wheel ring of DG Set of capacity 250 to 320 KVA complete all as specified and directed. |
| 63 | S&F in replacement Changeover switch on load front operated 320 Amps, 4 Pole, 415 volt including properly connecting incoming and outgoing cable andtesting after complete all as specified and directed. Make :L&T & Havels. |
| 64 | M&L for repairing for radiator of 62.5 to 200 KVA DG set ,arresting leakage if any by welding/brazing and refixing the same for(Necessary coolant and distrilled water required will be measured and paid seperately) complete all as specified and directed. |
| 65 | M&L for repairing for radiator of 250 to 320 KVA DG set,arresting leakage if any by welding/brazing and refixing the same for(Necessary coolant and distrilled water required will be measured and paid seperately) complete all as specified and directed. |
| 66 | M&L for removing and replacing the old unserviceable lead acid battery of size 12 Volt, 180 AH of reputed make as per sample including charging complete all as specified and directed. |
| 67 | Removing old unserviceable insulating material asbestos rope and fixing of newof existing size and shape complete all as specified and directed. |
| 68 | M&L for spray painting of diesel generating set of capacity 62.5 to 200 KVA with accousitic enclosure/ open type one coat of synthetic enamel paint body colour shall be apple green, black for foundation base frame, red for all guards for complete all as specified and directed. Note:- Body colour shall be apple green,black for foundation base frame, red for all guards. |
| 69 | M&L for spray painting of diesel generating set of capacity 250 KVA with accoustic enclosure one coat of synthetic enamel paint, body colour shall be apple green,black for foundation base frame, red for all guards for complete all as specified and directed. Note:- Body colour shall be apple green,black for foundation base frame, red for all guards. |
| 70 | M&L in repair for spray painting of diesel generating set of capacity 320 KVA with accoustic enclosure one coat of synthetic enamel paint, body colour shall be apple green,black for foundation base frame, red for all guards for complete all as specified and directed. |
| 71 | M&L for PCC 1:2:4 type B1 using (20 mm graded stone aggregate) for foundation of pole complete all as specified and directed. |
| 72 | S&F in replacement 3 Pole MCCB,630Amp, 36 KA with microprocessor release and Adjustable overload setting , 50 Hz, 415 V complete all as specified and directed. |
| 73 | S&F in replacement of 3 Pole MCCB, 250 Amp, 50 Hz 415 V with rupturing capacity 36 KA, fixed type complete all as specified and directed. |
| 74 | S&F in replacement of 3 Pole MCCB, 400 Amp, 50 Hz 415 V with rupturing capacity 36 KA, fixed type complete all as specified and directed. |
| 75 | S&F in replacement of 3 Pole MCCB, 630 Amp, 50 Hz 415 V with rupturing capacity 50 KA, fixed type complete all as specified and directed. |
| 76 | S&F in repair MCCB 125Amps 3 Pole breaking capacity 35KA complete all as specified and directed. |
| 77 | All as per item Ser No. 76.00 above but 100 Amp 3 Pole 25 KA. |
| 78 | All as per item Ser No 76.00 but of capacity 250A 3 Pole 25 KA. |
| 79 | All as per item Ser No 76.00 but of capacity 200A, 3 Pole 25 KA |
| 80 | S&F in repair MCCB 630 Amps 4 Pole breaking capacity 50KA complete all as specified and directed. |
| 81 | S&F in repair MCCB 400 Amps 4 Pole breaking capacity 36KA complete all as specified and directed. |
| 82 | S&F in repair MCCB 250 Amps 4 Pole breaking capacity 36KA complete all as specified and directed. |
| 83 | Material and Labour for earthing complete with GI earth plate electrode 600mmx600mmx6mm thick burried in ground vertically to a depth not less than 2.25meters below ground level with top edge of the earth plate at a depth not lesss than 1.5 meter below the ground level, earth plate surrounded 15cm thick layers of common salt and charcoal dust starting from ground below 15 cm of earth plate and up to 15 cm above the same.GI plate connected with galvanised iron strip of 25x4 mmby means of Copper nuts, bolts and washers.Strip laid in 40mm dia light grade GI pipe as protection from top of the plate up to test point (cost of protection pipe up to 7.5 meters from earth electrode will be included in the rates quoted by the contractor) with following:- (a)GI strip of size 25mm x 4mm. (b) Watering pipe GI light grade 20mm dia from top of the earth electrode up to MS funnel with wire mesh embeded in floor of PCC earth pit.(GI Funnel should properly tightned on GI watering pipe and embeded in PCC floor of earth pit with open top suitable for watering of earth pits) (c) PCC earth pit 30x30x30cm constructed in PCC 1:2:4 type B1 exposed surfaces smoothlyfinished with 15mm thick cement mortar 1:6 plaster including RCC pit cover 25mm thick reinforced with 8 mm dia TMT bar 75 mm center to center with 2 Nos MS handles of 12mm dia suitable for carrying of pit cover. |
| 84 | M&L for Earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or burried in ground or drawn in conduit/pipe or any other indicated situation for loop earthing etc as required 25x4 mm galvanised iron strip complete all as specified and directed. |
| 85 | Supply and laying GI pipe light grade in replecement of old unserviceable 50mm dia including fittings laid in trenches or under road crossingfor protection of UG cable complete all as specified and directed. |
| 86 | Supply and laying GI pipe light grade in replecement of old unserviceable 80mm dia including fittings laid in trenches or under road crossingfor protection of UG cable complete all as specified and directed. |
| 87 | M&L for boring of holes under road, pavement, hard standing by trenchless techonology using ultra sound technique/mannually/mechanically and necessary machine including supply and laying of 100mm diaGI pipe light grade including making necessaryexcavation upto 1.5 mtr deep on both side of road for making holes and inserting 100mm dia GI Pipe complete all as specified and directed. |
| 88 | M&L for repairing for alternator of DG Set of capacity 200 KVA complete including rewinding & replacement of connected items such as bearing, sleeves Nut bolts, coupling etc complete all as specified and directed. |
| 89 | M&L for repairing for alternator of DG Set of capacity 320 KVA complete including rewinding & replacement of connected items such as bearing, sleeves Nut bolts, coupling etc complete all as specified and directed |
| 90 | M&L for Auto Main Failure (AMF) panel made out of 2 mm thick CRCA sheet of size 0.90m x 0.30m x1.20m (approx) in Door type, powder coated of conforming to IS 8623 totally enclosed dust and vermin proof with front and rear openings of 415 Volts, 3 Phase, 4 Wire, AC 50 Hz having aluminium bus bar capacity required to carry current at 110% load of 180 KVA DG Set with three phase and half neutral colour coded, prewired with copper flexible cable of size 4 Sqmm all as specified with the following accessories, control cable from Gen Set to AMF panel & finishing complete with 7 tank process for powder coating in approved shade, having IP-42 degree of protection with hinged lockable doors, dust and vermin proof CPRI approved IP-54 duly painted with epoxy based powder coated paint complete all as specified :- (i) Micro processor based MCCB 3 Pole of suitable capacity as recommended by OEM, Manual draw out type with electrical contractor 500 Amps 4 pole for alternator (DG supply and Main Supply) -02 Nos. (ii) All controls indicators and standard fittings as follows: (a) Digital type Ammeter meter with in built selector switch of suitable capacity with CTs- 1 set. (b) Digital-type Voltmeter meter with in built selector switch of suitable capacity- 1 Set. (c) Multifunctional digital meter fro KWH, KVA, KW Amps, Volts, frequency, power factor etc. -1 No. |
| 91 | (iii) Functions:- (a) Supply failure timer and restroration - 1 No. (b) 3 impulse automatic engine Start/Stop logic. (iv) Announceation with indicators LED lamps for (a) Protective over loading relay- 1 No. (b) Low buld oil pressure, high water temperature, Engine over speed, battery low voltage, under voltage- 1 No., Earth fault relay- 1 No. (v) Controls (a) Load on indicators. (b) Load off indicators. (c) Engine start push button. (d) Engine stop push button. (e) Fault except/reset push button. (vi) Battery charging SMPS unit within auto built manual : (a) DC Volt meter. (b) DC Ammeter. (c) Charger rate selector switch. Note:- Rates are deemed to be included for civil work i.e. mild steel angle iron not less then 35x35x4mm, earth work, brick work, minimum clearance from ground is 0.40m complete as directed. |
| 92 | S&F in repair earth pit chamber alongwith cover of Polymer, FRP Pit Cover of heavy high grade polypropelene for high stress and starin level of size 225x300x195 mm complete all as specified and directed. |
| 93 | S&F ACP retro sign board of size 1.5x1.1 Meter using retro reflective high intensity prismatic reflective sheeting. The back ground of board is Blue Colour with white border and writing letter, numbers white colour mentioning the DG Set sub-station Details and Single line Schematic diagram of substation. Retro sign board shall be pasted on 3 mm thick ACP sheet. The board shall be fixed on Wall including fixing of fastners, nuts, bolts, washer etc complete all as specified and directed. |
| 94 | S&F MS Galvanised Chain link fencing,any size or type complete including taking down old underviceable complete all as specified and directed. |
| 95 | M&L for 6mm thick MS chequred plate of suitable size for cable duct cover and earth pit cover complete all as specified and directed. |
| 96 | M&L for general servicing by authorised rep of manufacturer of DG set 15 KVA to 20 KVA, draining out engine/ lubrication oil flushing and cleaning of oil chamber and pouring new engine oil after opening of tappet cover/ top cover tappet clearence setting with injector timing adjustment reaffixing of tappet/ top cover including replacement of tappet cover packing set, bonding and leak proof solution, oil pan/ chamber gasket including fixing of any other defective parts to be replaced at the servicing i.e all filters etc complete all as specified and directed. |
| 97 | M&l for general servicing by authorised rep of manufacturer of DG set 30 KVA to62.5 KVA, draining out engine/ lubrication oil flushing and cleaning of oil chamber and pouring new engine oil after opening of tappet cover/ top cover tappet clearence setting with injector timing adjustment reaffixing of tappet/ top cover including replacement of tappet cover packing set, bonding and leak proof solution, oil pan/ chamber gasket including fixing of any other defective parts to be replaced at the servicing i.e all filters complete all as specified and directed. |
| 98 | M&L for for general servicing by authorised rep of manufacturer of DG set 160 KVA, draining out engine/ lubrication oil flushing and cleaning of oil chamber and pouring new engine oil after opening of tappet cover/ top cover tappet clearence setting with injector timing adjustment reaffixing of tappet/ top cover including replacement of tappet cover packing set, bonding and leak proof solution, oil pan/ chamber gasket including fixing of any other defective parts to be replaced at the servicing i.e all filters complete all as specified and directed. |
| 99 | M&L for general servicing by authorised rep of manufacturer of DG set 320 KVA, draining out engine/ lubrication oil flushing and cleaning of oil chamber and pouring new engine oil after opening of tappet cover/ top cover tappet clearence setting with injector timing adjustment reaffixing of tappet/ top cover including replacement of tappet cover packing set, bonding and leak proof solution, oil pan/ chamber gasket including fixing of any other defective parts to be replaced at the servicing i.e all filters complete all as specified and directed. |
| 100 | M&L for general servicing by authorised rep of manufacturer of DG set 437.5 KVA, draining out engine/ lubrication oil flushing and cleaning of oil chamber and pouring new engine oil after opening of tappet cover/ top cover tappet clearence setting with injector timing adjustment reaffixing of tappet/ top cover including replacement of tappet cover packing set, bonding and leak proof solution, oil pan/ chamber gasket including fixing of any other defective parts to be replaced at the servicing i.e all filters complete all as specified and directed. Note: 1. All worn out parts from item No 72 to 76 and oil shall be measured and paid separately under respective items. 2. The quoted Rate is inclusive of all required tools and plants to carry out the work/Job. |
| 101 | Supply & Fix in replecement power contactor 400 Amps capacity suitable for AMF panel of DG sets a per matching to existing complete all as specified and directed. |
| 102 | Material and Labour for earthing complete with copper earth plate electrode 600mmx600mmx3.15mm thick burried in ground vertically to a depth not less than 2.25meters below ground level with top edge of the earth plate at a depth not less than 1.5 meter below the ground level, earth plate surrounded 15cm thick layers of common salt and charcoal dust starting from ground below 15 cm of earth plate and up to 15 cm above the same. Copper plate connected with copper strip of 20x3 mmby means of copper nuts, bolts and washers.Strip shall be laid in 40mm dia light grade GI pipe as protection from top of the plate up to test point (cost of protection pipe up to 7.5 meters from earth electrode will be included in the rates quoted by the contractor) with following complete all as specified and shown in electrical plate No 3 of SSR Part-I & testing on completion :- (a)Copper strip of size 20mm x 3mm. (b) Watering pipe GI light grade 25mm dia from top of the earth electrode up to MS funnel with wire mesh embeded in floor of PCC earth pit.(GI Funnel should properly be tightened on GI watering pipe and embeded in PCC earth pit with open top suitable for watering of earth pits) (c)Excavation & earthwork in any type of soil PCC earth pit 30x30x30cm constructed in PCC 1:2:4 type B1 exposed surfaces smoothly finished with 15mm thick cement mortar 1:6 including RCC pit cover 50mm thick 1:2:4 type B1 reinforced with 8mm dia mild steel TMT bar @75mm centre to centre with 2 Nos MS handles of 12mm dia mild steel TMT bars suitable for carrying of pit cover. |
| 103 | S&F of copper strip of size 20x3 mm including all connected accessories complete all as specified and directed. |
| 104 | M&L for Opening the DG set of160 KVAincluding cleaning of radiator fins/tubes, repair to any leakage in radiator, replacement of lubricating oil, fuel filters, oil filters, coolant and Air Filter (inner & outer), super bypass filter complete with oiling, greasing of all movable parts & equipments and replacing allflexible/steel wire mesh type hose pipes including fuel pipe line ,belts & Bearings including re-assembling the complete Parts and Testing complete all as specified and directed. Note:-Spare parts required for replacment shall be measured & paid separately under respective item of BOQ. |
| 105 | M&L for Opening the Piston ring and liner for 160 KVA DG Setas per existing make & OEM complete all as specified and directed. |
| 106 | Supply only valve, Head Guide, Head sheet & Head seal for 160 KVA DG Setas per existing make & OEM complete all as specified and directed. |
| 107 | Supply only Injector sleeves & Head gasket for 160KVA DG Setas per existing make & OEM complete. |
| 108 | Supply only Packing Kit for 160 KVA DG Setas per existing make & OEM complete all as specified and directed. |
| 109 | M&L in repair for head and fuel injector assembly complete all as specified and directed. |
| 110 | M&L in repair for turbo assembly complete all as specified and directed. |
| 111 | M&L for Checking the tappet clearancae and adjustment of valve including replacement of tappet gasket forDG Set 15 to 62.5 KVA complete all as specified and directed. |
| 112 | M&L for Checking the tappet clearancae and adjustment of valve including replacement of tappet gasket forDG Set 70 to 160 KVA complete all as specified and directed. |
| 113 | M&L for Checking the tappet clearancae andadjustment of valve including replacement of tappet gasket forDG Set 200 to 450 KVA complete all as specified and directed. |
| 114 | Taking down the old unserviceable fan belt and Supply andFix Fan belt of existing size for DG Set of capacity 15 to 62.5 KVA complete all as specified and directed. |
| 115 | Taking down the old unserviceable fan belt and Supply andFix Fan belt of existing size for DG Set of capacity 70 to 160 KVA complete all as specified and directed. |
| 116 | Taking down the old unserviceable fan belt and Supply andFix Fan belt of existing size for DG Set of capacity 200 to 320 KVA complete all as specified and directed. |
| 117 | Taking down the old unserviceable fan belt and Supply andFix Fan belt of existing size for DG Set of capacity 437.5 KVA complete all as specified and directed. |
| 118 | Supply and Cladding with glass/rock wool and aluminium sheets of exhaust manifold forfor DG sets 15 to 62.5 KVA including removing of existing asbestos rope or any other type of insulation complete all as specified and directed. |
| 119 | Supply and Cladding with glass/rock wool and aluminium sheets of exhaust manifold forfor DG sets 70 to 160 KVA including removing of existing asbestos rope or any other type of insulation complete all as specified and directed. |
| 120 | Supply and Cladding with glass/rock wool and aluminium sheets of exhaust manifoldforfor DG sets 200 to 320 KVA includung removing of existing asbestos rope or any other type of insulation complete all as specified and directed. |
| 121 | Dismantling the fuel pump from the engine of capacity 15 to 20 KVA ,transportng to the service center and complete servicing and overhauling of the pump including replacement of service kit ,element, delivery valve,plunger,copper washer etc all as required including re-calibration,refixing and testing complete all as specified and directed. |
| 122 | Dismantling the fuel pump from the engine of capacity 62.5 to 100 KVA ,transportng to the service center and complete servicing and overhauling of the pump including replacement of service kit ,element, delivery valve,plunger,copper washer etc all as required including re-calibration,refixing and testing complete all as specified and directed. |
| 123 | Dismantling the fuel pump from the engine of capacity 160 KVA ,transportng to the service center and complete servicing and overhauling of the pump including replacement of service kit ,element, delivery valve,plunger,copper washer etc all as required including re-calibration,refixing and testing complete all as specified and directed. |
| 124 | Dismantling the fuel pump from the Engine of capacity 320 KVA ,transportng to the service center and complete servicing and overhauling of the pump including replacement of service kit ,element, delivery valve,plunger,copper washer etc all as required including re-calibration,refixing and testing complete all as specified and directed. |
| 125 | Draining out the diesel tank, cleaning/washing out the sludge and re-filling with diesel for the DG Set of capacity 15 to 20 KVA complete all as specified and directed. |
| 126 | Draining out the diesel tank, cleaning/washing out the sludge and re-filling with diesel for the DG Set of capacity 62.5 to 100 KVA complete all as specified and directed. |
| 127 | Draining out the diesel tank, cleaning/washing out the sludge and re-filling with diesel for the DG Set of capacity 160 to 200 KVA complete all as specified and directed. |
| 128 | Draining out the diesel tank, cleaning/washing out the sludge and re-filling with diesel for the DG Set of capacity 250 to 320 KVA complete all as specified and directed. |
| 129 | Draining out the diesel tank, cleaning/washing out the sludge and re-filling with diesel for the DG Set of capacity 437.5 to 625 KVA complete all as specified and directed. |
| 130 | Taking downradiator from DG set of Capacity 15 to 20 KVA and servicing,cleaning of with suitable reagent, washing throughly,arresting leakage if any by welding/brazing and refixing the same for complete all as specified and directed. Note :- Necessary coolant required will be measured and paid seperately |
| 131 | Taking downradiator from DG set of Capacity 437.5 KVA and servicing,cleaning of with suitable reagent, washing throughly,arresting leakage if any by welding/brazing and refixing the same for complete all as specified and directed. Note :- Necessary coolant required will be measured and paid seperately |
| 132 | Cutting and removal old unserviceable steel sections and sheets metals and fixing of new sheet and steel sections of existing size and shape by necessary gas/arc welding, fixing by nut bolts rivets etc complete all as specified and directed. |
| 133 | Removing old unserviceable insulating material and fixing of new insulating material of existing size and shape complete all as specified and directed. |
| 134 | M&L for Spray painting of diesel generating setof capacity 15 to 20 KVA. with one coat of synthetic enamel paint including preparation of old painted surfaces complete all as specified and directed. Note :- Body colour shall be apple green,black for foundation base frame, red for all guards. |
| 135 | M&L for Spray painting of diesel generating set of capacity 437.5 KVA with accostic enclosure one coat of synthetic enamel paint including preparation of old painted surfaces complete all as specified and directed. Note:- Body colour shall be apple green,black for foundation base frame, red for all guards. |
| 136 | S&F in replacment AVR system for DG set of capacity 62.5 to 100 KVA as per existing sample complete all as specified and directed. |
| 137 | S&F in replacment AVR system for DG set of capacity 160 KVA as per existing sample complete all as specified and directed. |
| 138 | S&F in replacment AVR system for DG set of capacity 320 KVA as per existing sample complete all as specified and directed. |
| 139 | S&F in replacement turbo chargers repairs kit suitable for DG set 62.5 to 100 KVA complete all as specified and directed. |
| 140 | S&F in replacement turbo chargers repairs kit suitable for DG set 160 KVA complete all as specified and directed. |
| 141 | S&F in replacement turbo chargers repairs kit suitable for DG set 200 to 450 KVA complete all as specified and directed. |
| 142 | Supply and laying in replecementXLPE insulatedscreened, PVC bedded galvanised steel strip or wire armoured electric power cable(Heavy duty) with aluminium conductor, 1100 volts, grade cross sectional area 400 Sqmm 3.5 core complete all as specified and directed. |
| 143 | Supply and laying in replecementXLPE insulatedscreened, PVC bedded galvanised steel strip or wire armoured electric power cable(Heavy duty) with aluminium conductor, 1100 volts, grade cross sectional area 120 Sqmm 3.5 core complete all as specified and directed. |
| 144 | Supply and laying in replecementXLPE insulatedscreened, PVC bedded galvanised steel strip or wire armoured electric power cable(Heavy duty) with aluminium conductor, 1100 volts, grade cross sectional area 240 Sqmm 3.5 core complete all as specified and directed. |
| 145 | Supply and laying in replecementXLPE insulatedscreened, PVC bedded galvanised steel strip or wire armoured electric power cable(Heavy duty) with aluminium conductor, 1100 volts, grade cross sectional area 150 Sqmm 3.5 core complete all as specified and directed. |
| 146 | Supply and laying in replecementXLPE insulatedscreened, PVC bedded galvanised steel strip or wire armoured electric power cable(Heavy duty) with aluminium conductor, 1100 volts, grade cross sectional area 185 Sqmm 3.5 core complete all as specified and directed. |
| 147 | Supply and laying in replecementXLPE insulatedscreened, PVC bedded galvanised steel strip or wire armoured electric power cable(Heavy duty) with aluminium conductor, 1100 volts, grade cross sectional area 70 Sqmm 3.5 core complete all as specified and directed. |
| 148 | Supply and laying in replecementXLPE insulatedscreened, PVC bedded galvanised steel strip or wire armoured electric power cable(Heavy duty) with aluminium conductor, 1100 volts, grade cross sectional area 35 Sqmm 3.5 core complete all as specified and directed. |
| 149 | Supply and laying in replecementXLPE insulatedscreened, PVC bedded galvanised steel strip or wire armoured electric power cable(Heavy duty) with aluminium conductor, 1100 volts, grade cross sectional area 10 Sqmm 4 core complete all as specified and directed. |
| 150 | Excavation in trenches not exc 1.5 mtr wide and n. exc 1.5 m depth and getting out in soft/loose soil for laying UG cables of various sizes complete all as specified and directed. |
| 151 | Returning, filling in including spreading,leveling, watering and well ramming in layers n. exc 25 cm in soft/loose soil complete all as specified and directed. |
| 152 | Removing surplus excavated materials to a distance n. exc 50 m and depositing where directed at a level n exc 1.5 m above the starting point complete all as specified and directed. |
| 153 | Supply and laying burnt brick sub class "B" standard size for cable protection keeping width of the brick parallel to the length of the cable in trenches complete all as specified and directed. |
| 154 | Supply & spreading clean, dry river sand in trenches ,ducts including leveling, punning for cushioning of cables complete all as specified and directed. Note : Punned thickness of sand cushioning shall be measured. |
| 155 | S&F ACP retro sign board of size 1.5x1.1 Meter using retro reflective high intensity prismatic reflective sheeting. The back ground of board is Blue Colour with white border and writing letter, numbers white colour mentioning the HT/LT sub-station details and Single line Schematic diagram of substation. Retro sign board shall be pasted on 3 mm thick ACP sheet. The board shall be fixed on sheet tublar poles 10 ft height of 50 mm dia including PCC 1:2:4 type B-1 for foundation including earth work in any types of soil and fixing of clamps, nuts, bolts, washer etc complete all as specified and directed. |
| 156 | M&L for B check general servicing by authorised rep of manufacturer of DG set of capacity 437.5 KVA, including replacement of oil filter, fuel filter, air filter after draining out engine/ lubrication oil, coolant flushing and cleaning of oil chamberafter opening of tappet cover/ top cover tappet clearence setting with injector timing adjustment re-fixing of tappet/ top cover including replacement of tappet cover packing set, bonding and leak proof solution, oil pan/ chamber gasketat the servicing and other work comes under B Check service as mentioned in B Check by the manufacturer complete all as speciied and directed. Note-Engine oil will be paid separately. |
| 157 | M&L for B check general servicing by authorised rep of manufacturer of DG set of capacity 160 KVA, including replacement of oil filter, fuel filter, air filter after draining out engine/ lubrication oil, coolant flushing and cleaning of oil chamberafter opening of tappet cover/ top cover tappet clearence setting with injector timing adjustment re-fixing of tappet/ top cover including replacement of tappet cover packing set, bonding and leak proof solution, oil pan/ chamber gasketat the servicing and other work comes under B Check service as mentioned in B Check by the manufacturer complete all as speciied and directed. Note-Engine oil will be paid separately. |
| 158 | S&F of coolent as per site requirement complete all as specified and directed. |
| 159 | S&F of engine oil 20 W 40 complete all as specified and directed. |
| 160 | S&F of sound proof canopy for 437.5 KVA generator with the following acessories :- (a) Platform (frame) size channel 5"x5"2", Length height 20", upper height 8"3" and board 8" - 1 No. (b) Residence silencer. (c) Lock (left-3 & Right-3) - 6 Nos. (d) Paint green. (e) Door right - 3 (both open), back - 1 & front - 1 door. (f) Heinze sudheer type (male/female) - 12 Nos. (g) Rock Bul 96x50. (h) Motor 1.5 HP III Phase (for cooling) - 2 Nos. (i) XL Fan -24" - 2 Nos. (j) CRC sheet (k) Door bidding. (l) Thickness 4 inch. (m) Radiator partition. (n) Jali 4mm. |
| 161 | S&F in Replacement LED Bollard light 9 Wand 1 mtr long including nesessory excavation and PCC work for fixing complete all as specified and directed. |
| 162 | S&F in replacement Powder coated pressure die cast aluminium SMD LED street light with heat resistant, toughened glass of capacity 90 Watt complete all as specified and directed. |
| 163 | S&F in replacement Powder coated pressure die cast aluminium SMD LED street light wirh heat resistant toughened glass of capacity 120 Watt complete all as specified and directed. |
| 164 | S&F in replacement Powder coated pressure die cast aluminium SMD LED street light wirh heat resistant toughened glass of capacity 70 Watt complete all as specified and directed. |
| 165 | S&F in replacement LED flood light with pressure die cast aluminium housing 80 Watt Orion 3.0 Seris completed with connection complete all as specified and directed. |
| 166 | S&F in replacement LED flood light with pressure die cast aluminium housing 120Watt Orion 3.0 Seris completed with connection complete all as specified and directed. |
| 167 | M&L for pole painting 9.0 mtr long with a coat of aluminium paint after preparation of old painting surface by scrappining including marking of black and yellow strip not less than 30 cm width with sythethic enamelled paint from coping to upto height 1.5 mtr of pole alternative way including necessary MES & Pole number to be wriiten in the circular yellow batch on the pole complete all as specified and directed. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
