Tender For Modernization Of Existing Direct Purchase Centre At Karuppur Village In Kuthalam Taluk In Mayiladuthurai District.
Tender Value
19.66 Lakhs
Estimated cost
Bid Submission
08 Mar 2023
0 days left
EMD
19500
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
kuthalam → Tamil Nadu
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Modernization Of Existing Direct Purchase Centre At Karuppur Village In Kuthalam Taluk In Mayiladuthurai District.
BOQ
| Sl. No. | Item Description |
| 1 | CIVIL WORK |
| 2 | Earth work excavation for foundation in all classes of soils and sub-soils and to full depth as may be directed except in hard rock requiring blasting including initial leads and lifts and refilling the sides of foundation with excavated earth in 150 mm layers well watered, rammed and consolidated including depositing surplus earth within the godown or inside compoundin places shown with initial lead of 10 mts and initial lift of 2 mts. clearing, levelling the site, shoring, strutting, bailing of water wherever necessaryetc., complete complying with standard specificationand as directed. |
| 3 | Supplying and filling in foundation and basement with M.Sand in layers of 150mm thick, well watered, rammed and consolidated including watering etc., complete complying with standard specifications and as directed. |
| 4 | CEMENT CONCRETE 1:5:10(one cement , five sand and ten aggregate)using 40mm gauge hard broken granite stone jelly for foundation including de-watering side shuttering , strutting, wherever necessary including curing etc., complete complying with standard specifications and as directed. |
| 5 | Supplying and filling in foundation with Gravel in layers of not exceeding 150mm thick well watered, rammed and consolidated including watering etc., complete complying with standard specification and as directed. |
| 6 | Reinforced Cement Concrete 1:1 1/2:3 ( one cement, One and half sand, three aggregate)using 20mm of hard broken granite stone for all RCC works using machine for mixing concrete excluding cost of centering, Strutting, shuttering, and fabrication of reinforcement and placing the grills in position etc., but including laying, vibrating with mechanical vibrators, Groove cutting,finishingand curing etc., complete complying with standard specifications and as directed by the departmental officers.In foundation and basement. |
| 7 | Reinforced Cement Concrete 1:2:4 ( one cement, two sand, four aggregate)using 20mm of hard broken granite stone for all RCC works using machine for mixing concrete excluding cost of centering, Strutting, shuttering, and fabrication of reinforcement and placing the grills in position etc., but including laying, vibrating with mechanical vibrators, Groove cutting,finishingand curing etc., complete complying with standard specifications and as directed by the departmental officers.In foundation and basement. |
| 8 | BRICK WORKin cement mortor 1:5(one cement, five sand) using best quality second class chamber burnt bricksofsize 9\"x4 3/8\"x2 3/4\"for walls including cost of scaffolding curing, finishing etc.,complete complying with standard specifications and as directed. |
| 9 | Providing FORM WORK for centering the soffits of all reinforcement concrete work including strutting to the required (3 metre) height with mild-steel sheets of size 90cmx60cm 10 gauge stiffened with welded mild steel angles of size 25mmx25mmx3mm laid with country wood joist of average of size 10cmx6.50cm at about 90cm centres with casurina props of 13cm dia at 75cm centre to centre with all nails coir,wedges complete and removing the form work after necessary curing period as directed by the corporations officers. The rates should inclusives of cutting , bending, welding , charges of M.S sheets, M.S. angles etc., Complete.Column footing, plinth beam, top tie beam etc., |
| 10 | Column, sunshade etc., |
| 11 | PLASTERING withC.M.1:5(one cement and five sand) 12mm thick including cost of scaffolding, finishing, curing etc., complete complying with standard Specification and as directed. |
| 12 | Painting two coats of newly plastered wall surface with ready mixed plastic emulsion paint of first class approved quality and colour over a priming coat including thorough scrapping, clean removal of dirt, and including necessary plaster of paris putty, wherever required etc., complete complying with standard specification and as directed. |
| 13 | Supplying, fabricating and placing in position MS/RTS grills for reinforcement for all R.C.C. works including cost of steel, labour for straightening, bending, cranking, tying grills with 18 gauge galvanized binding wire and placing grills in position complete complying with standard specification and as directed. |
| 14 | Fabricating, hoisting and fixing in position (as per drawing enclosed) PIPE PURLINS of available length of thestructural steel pipe of size 75x25x3mm and welded with M.S. plate 8mm thick, including cutting, drilling holes, and welding. The rate should inclusive of cost of all materialslabour charges and painting with two coat of ISI Approved quality of anticorrosive metallic nut brown colour paint over one coat of steel red oxide primer etc., complete as directed by the Corporation officers. |
| 15 | Fabricating, and erection in position of 4 Nos TUBULAR TRUSS of 9.0m span with 40mm Dia M.S. pipe for principal rafter and bottom tie and with 25mm Dia M.S.pipe for all other member including cutting, straightening, aligning, tampering ends, welding, fixing with MS plates 8mm thick at two sides for jointing with principal rafter bottom tie fixing the truss with 10mm base plate over anchor bolts 20mm x 45cm long with 250 x 150 x 8mm anchor plateetc complete. The trusses will be manufacturedas per drawing enclosed. The rate shouldincludecost of all materials, labour charges and two coats of anti-corrosive metallic nut brown colour paint over one coat of red oxide primer as directed by Corporation officers. |
| 16 | Fabrication and erection of 6 Nos STEEL STANCHION 3m height made up of 2 Nos of 65mm dia M.S.pipes with12mm thick, 45x45 cm.size base plate supported by 65x65x6mm angle over with foundation bolts 25mm dia 4Nos, and top plate 10mm thick 30x30 cm size supported by angle 50x50x6mm with bracing of 50x6mm flat at 50 cm centre to centre including fixing base plate, top plate and welding the bracings to pipes. The rate should inclusive of cost of all materials, labour charges and painting with two coats of good quality I class synthetic enamel paint over one coat of oxide primer etc. completeas directed by Corporation officers. |
| 17 | Supplying and laying of profiled colour galvalume sheet with combination 55A1:43 4Zn:1:6SI of TCT bent type 0.47mm thick and standard width of 1.06m with yield strength of 550 MPA made from high tensile/ CR sheets of approved quality for roofing with necessary fixing arrangements like 65m abd long hexagonal head screws with EPDM rubber seal etc., complete complying with standard specification and as directed by the departmental officer. (Test certificate for quality should be furnished on receipt of material at site) |
| 18 | Wiring with 2x1.5sqmm(22/0.3) PVC insulated unsheathed SC. Cu.Conductor of 1100V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories with TW switch box with 5A F.T. switch inflush with wall, covered with hylum sheet of 3mm thick with painting of suitable colour for open PVC light / fan point (For electronic regulator) (5 Points Per Coil) |
| 19 | Supply and fixing of 30Watts LEDstreet light fitting (Specification :- high power LED a light source with Electronic driver, Fitting of Versatile pressure de-cast Aluminium (IP66 )alloy LM-24 for housing (heat sink) for better heat transmission., fitting with Epoxy powder coated white after phosphochromate treatment.and optics is Asymmetric type)complete with 32mm dia GI pipe (Class ‘B’) with 1 No 32mm GI bend complete on the post or wall with necessary clamps with PVC unsheathed copper leads MS clampsand as directed ( ISI standards) ( crompton/ similar make ) |
| 20 | Supply and fixing ofsingle box 4’40W flu fitting complete with copper choke and condenser with TW round blocks on wall of ceiling with flu tube with PVC unsheathed Copper leads from terminals to the fitting with flu. Tubes (MAKE :CROMPTON). |
AI Tender Summary
Tender Timeline
Mar 02, 2023
11:30 IST
Tender Published
Tender notice published.
CompletedMar 08, 2023
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedMar 09, 2023
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender