|
| 1 | Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulatedcopper conductor single core cable etc. as required. |
| 2 | Group C |
| 3 | Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) |
| 4 | 6 way, Double door |
| 5 | 8 way Doubledoor |
| 6 | Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 volts, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) |
| 7 | 4 way (4 + 12), Double door |
| 8 | Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, \"C\" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. |
| 9 | Single pole |
| 10 | Single pole and neutral |
| 11 | Triple pole and neutral |
| 12 | Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required |
| 13 | 2X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire |
| 14 | 4 X 2.5 sq. mm + 2 X 2.5 sq. mm earth wire |
| 15 | 2 X 4 sq. mm + 1 X 4 sq. mm earth wire |
| 16 | Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required |
| 17 | 3 x 4 sq. mm |
| 18 | 3 x 2.5 sq. mm |
| 19 | 3 x1.5 sq mm |
| 20 | 4 x1.5 sq mm |
| 21 | 5 x1.5 sq mm |
| 22 | 6 x1.5 sq mm |
| 23 | 6 x2.5 sq mm |
| 24 | Supplying and fixing 12 module GI box along with modular base & cover plate for modular switches in recess etc. as required. |
| 25 | Supplying and fixing 5/6 A modular switch on the existing modular plate & switch box including connections but excluding modular plate etc. as required. |
| 26 | Supplying and fixing 3 pin 5/6 A modular socket outlet on the existing modular plate & switch box including connections but excluding modular plate etc. as required. |
| 27 | Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required. |
| 28 | Providing, laying and fixing following dia G.I. pipe (medium class) in ground complete with G.I. fittings including trenching (75 cm deep) and re-filling etc. as required |
| 29 | 100 mm dia |
| 30 | Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. |
| 31 | 4 X 25 sq. mm (28mm) |
| 32 | 2 X 10 sq. mm (19mm) |
| 33 | Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 kV grade of following size on wall surface as required. |
| 34 | upto 35 Sq.mm(Clamped with 1 mm thick saddle) |
| 35 | Laying of one number PVC insulated and PVC sheathed / XLPEpower cable of 1.1 kV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc. as required. |
| 36 | Upto 35 sq. mm |
| 37 | Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 kV grade of following size in the existing RCC/ HUME/ METAL pipe as required. |
| 38 | Upto 35 sq. mm |
| 39 | Supplying and fixing of light class G.l. pipe of 50 mm dia. (nominal) 3 metres length along the pole/wall for protection of under ground cable as required. |
| 40 | Supplying and fixing 30 A, 415 V, TPN Industrial type socket outlet, with 4 pole and earth, metal enclosed plug top alongwith 30 A \"C\" curve, TPMCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket outlet and complete with connections, testing and commissioning etc. as required. |
| 41 | Supplying and fixing 20 A, 240 V, SPN Industrial type socket outlet, with 2 pole and earth, metal enclosed plug top alongwith 20 A \"C\" curve, SP, MCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket outlet and complete with connections, testing and commissioning etc. as required |
| 42 | Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required. |
| 43 | Providing and laying earth connection from earth electrode with 6 SWG dia G.I. Wire in 15 mm dia G.I. pipe from earth electrode including connection with G.I. thimble excavation and re-filling as required. |
| 44 | Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing as required. |
| 45 | Providing and fixing of lightning conductor finial, made of 25 mm dia 300 mm long, G.I. tube, having single prong at top, with 85 mm dia 6 mm thick G.I. base plate including holes etc. complete as required. |
| 46 | Providing and fixing G.I. tape 20 mm X 3 mm thick on parapet or surface of wall for lightning conductor complete asrequired. |
| 47 | Providing and fixing G.I. tape 20 mm X 3 mm thick on parapet or surface of wall for lightning conductor complete as required.(For vertical run) |
| 48 | Providing and fixing testing joint, made of 20 mm X 3 mm thick G.I. strip, 125 mm long, with 4 nos. of G.I. bolts, nuts, chuck nuts and spring washers etc. complete as required. |
| 49 | Supplying and fixing 3 pin, 5 A ceiling rose on the existing junction box/ wooden block including connections etc. as required. |
| 50 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :One or more coats on old work |
| 51 | Supplying, installation, Testing and Commissioning of 48W LED Street light fitting cat noincluding Inbuilt electronic LED driver (SMPS based constant current supply) with lower THD, Output Open / Short Circuit protection, Phase to Phase protection, Over Voltage protection, Surge Voltage protection & other safety test as per IS 15885 Part-2/Sec 13 and BIS comply with inbuilt surge protection device and fixing on wall/truss/pole with suitable clamps and nut bolts and other accessories including giving connection at site of work etc., as required. |
| 52 | Supplying and fixing of 32 mm dia X 1.00 metres long G.I. pipe (medium class) bracket for mounting of LED street light fitting on pole including bending the pipe to the required shape, 2 nos 40 mm X 3 mm flat iron clamps with nuts,bolts and washer, painting the flat iron with primer and finishpaint etc. as required. |
| 53 | Supplying of XLPE insulated and PVC sheathed cable of 1.1KV grade(as per IS 7098) Aluminium armoured underground cable confirming to IS 7098 (part I)1988 with upto date amendments of the following size at the site of work. |
| 54 | 4 x 25.0 Sqmm |
| 55 | 2 X 10 Sq mm |
| 56 | Supplying, installation, Testing and commissioningof40 watt StupeWell Glass with energy saving long life corrosion resistant, vertical/horizontal surface mounting pressure die-cast aluminium well glass with high power LED as light sourceand fixing on truss /wall/ pole with suitable MS clamps and nut bolts with conduit including giving connection testing etc., at site of work as required. (Rating IP66, Luminar efficacy > 100Lm/W, CRI>75) |
| 57 | Supplying, installation, Testing and commissioningof 70 wattWell GlassItem descripitionwith energy saving long life corrosion resistant, vertical/horizontal surface mounting pressure die-cast aluminium well glass with high power LED as light source(or equivalent philips,make) and fixing on truss /wall/ pole with suitable MS clamps and nut bolts with conduit including giving connection testing and dismantling the existing fitting without damage etc as required.etc., at site of work as required. (Rating IP66, Luminar efficacy > 100Lm/W, CRI>75) |
| 58 | Supplying, installation, testing andcommissioningof two numbers 20W LED T8 tubelight with PC bodyand inbuilt driver with efficacy of 100 lumens/W along with industrial batten suitable for Twin T8 LED tube and fixing on wall/truss by using necessary clamps alongwith dismantling the existing fitting. |
| 59 | Re-installation of existing 40W well Glasswith fixing on wall/truss/pole with suitable clamps and nut bolts and other accessories including providing and fixing ofsuiltable MS Angle bracketsas directed by engineer in charge and giving connection at site of work as per etc., as required. |
| 60 | CREDIT ITEMS :- |
| 61 | Dismantled MS conduit pipe of different sizes, Switch boards and clamps etc. |
| 62 | Dismantled Aluminium insulated wire |
| 63 | Dismantled Box type batten with choke |
