Power Government Departments Closing in 0 days TDR #36559785

Tender For Tender For Supply Of Equipment Material , Design, Erection, Testing Commissioning For Sop To Jsv, Lwss Phase-2Nd Gunu Gharat To Pakhrotu In Gp Kandla By Prov. 11/.4 Kv 3X250 Kva S/Stn. At Village Sapra A/W 11 Kv Ht And Lt Line Section Ko

Issued by Government Departments · dalhousie, Himachal Pradesh
Tender Value
42.49 Lakhs
Estimated cost
Bid Submission
09 Mar 2023
0 days left
EMD
42494
Bank guarantee accepted
Document Fee
1180
Non-refundable
Tender Type
Online

Tender Overview

Organization
Click here to view tendering authority
Tender ID
Click here to view tender id
Competition Type
NCB
Bidding Type
Tender
Location / State
dalhousie → Himachal Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Click here to view website
Contact Person
Click here to view contact person
Address
Click here to view address

Project Description

Tender For Supply Of Equipment Material , Design, Erection, Testing Commissioning For Sop To Jsv, Lwss Phase-2Nd Gunu Gharat To Pakhrotu In Gp Kandla By Prov. 11/.4 Kv 3X250 Kva S/Stn. At Village Sapra A/W 11 Kv Ht And Lt Line Section Koti Under Tender For Supply Of Equipment / Material , Design, Erection, Testing Commissioning For Sop To Jsv, Lwss Phase-2Nd Gunu Gharat To Pakhrotu In Gp Kandla By Prov. 11/.4 Kv 3X250 Kva S/Stn. At Village Sapra A/W 11 Kv Ht And Lt Line Section Koti Under

BOQ

Name of Work: Tender for Supply of equipment / material , design, erection, testing & commissioning for SOP to JSV, LWSS Phase-2nd Gunu Gharat to Pakhrotu in GP Kandla by Prov. 11/.4 KV 3x250 KVA S/Stn. at Village Sapra a/w 11 KV HT and LT linesection Koti under ESD Koti ED Chamba ( T.S. No. 109/22-23 )
Sl. No. Item Description
1Supply part of 11/.4 KV 250 KVA DISTRIBUTION SUB STATION
211/.4 KV 250KVA DTR (REC Sep. ord 11/1976
3Prov. ST PolePole 10 Mtr. Long W/L 200 Kgs
4Muff for steel tubular pole with concrete filling
5X-Arm: [Channel Iron (100x50x5 mm), Length : 2800 mm X 2 Nos] for incomer line
6MS A.I.(50X50x6 mm), Length: 2800 mm x(1 Nos for LA\"s )
7X-Arm: [Channel Iron (75x40x5 mm), Length : 2800 mm X 4 Nos] for supporting DO fuse unit & GO switch
8X-Arm: [Channel Iron (100x50x6 mm), Length : 2800 mm X 2 Nos] for transformer bed
9X-Arm [Channel Iron (100x50x6 mm), Length : 460 mm x 2 Nos for supporting Main Channel of Transformer]
10MS A.I.(50X50x6 mm), Length: (2800 mm) x 2 No.
11MS Angle Iron (35X35x5 mm), Length : 460 mm x 2 Nos
12MS A.I.(50X50x6 mm), Length: (950 mm) x 2 Nos. of bed knee bracing
13MS Angle Iron (50X50x6 mm), Length : (2800 mm) x2 Nos for Transformer LT Distribution Box and G.O switch fixing assembly
14MS Angle Iron (50X50x6 mm), Length : (450 mm)x1 Nos for Transformer LT Distribution Box and G.O switch fixing assembly
15G.O. Switch handle supporting: [C.I. (75x40x6mm), length: 460mm for Transformer LT Distribution Box and G.O switch fixing assembly
16G.O AB switch unit (11KV,400,663KA) Tripple pole O/D type
17D.O Fuse unit
18Surge Arrester, 9 kV Station Class
19Discs insulator sets (comp. 1 No. Disc: ^^(Porcelain, BS, 12 kV, 90 kN) i/c Dead End Clamps etc.)
20Stay set complete
21Staywire (7/3.15mm)( 10 Kg per stay set)
22Pipe earthing with GI,Charcoal & Salt
23Prov. LT distribution panel with MCCB (400 A, 36 KA, 4P,1 No.) & SFU (100 A 4 No. rewireble) for 250KVA Trf. as per specification
24Half clamp (M.S. Flat 50x6)
25Full clamps (M.S. Flat 50x6)
26M. S. Nuts & Bolts off sizes (Galvanised coated) [prefarably 16mm Ø or more (with flat and spring washer)
27Aluminium Thimbles
28Copper Thimble
29Danger Plate
30Barbed wire (REC Sp F 3/1981)
31LT Cable 3-1/2 core-185mm sq.
32Alluminium Paint
33Prov.ACSR, 6/1/3.35 mm
34prov. HP make AIQ Desktop Model HP 200 G4 with intell core 3-10110U-10 Gen.processor, 8GB DDR4 RAM expenditure upto 16 GB, ITB, HDO (T2QORPM)2st antiglare LED desplay withFHD (1920x1060) integrated HD Graphics & Webcam, 2xUSB, 3.0 2xUSB, 2.0 Cardreacer. Audio part VGNHDMI/DP Port, 10x100, 1000Mcomdliant LAN USB key board & mouse internalspl. connectivity BO2 11 b/g/n/ac PL windows etc. with three years on site warranty. (II) 650VA offline UPS system with12Vx7AHx2Nos: 158VAH/SMF batteryto povide20 Min. battery back upwith three year warrantyon UPS &battery from delivery with printer
35Prov. Transformer Bed plinth for 250KVA S/Stn structure complete with CC 1:6:12 R.R. massonery & plastering etc. a/w Chain link fencing, Angle iron Gate etc. for DTR Fencing.
36Erection part of 11/.4 KV 250 KVA DISTRIBUTION SUB STATION
3711/.4 KV 250KVA DTR (REC Sep. ord 11/1976
38Prov. ST PolePole 10 Mtr. Long W/L 200 Kgs
39Muff for steel tubular pole with concrete filling
40X-Arm: [Channel Iron (100x50x5 mm), Length : 2800 mm X 2 Nos] for incomer line
41MS A.I.(50X50x6 mm), Length: 2800 mm x(1 Nos for LA\"s )
42X-Arm: [Channel Iron (75x40x5 mm), Length : 2800 mm X 4 Nos] for supporting DO fuse unit & GO switch
43X-Arm: [Channel Iron (100x50x6 mm), Length : 2800 mm X 2 Nos] for transformer bed
44X-Arm [Channel Iron (100x50x6 mm), Length : 460 mm x 2 Nos for supporting Main Channel of Transformer]
45MS A.I.(50X50x6 mm), Length: (2800 mm) x 2 No.
46MS Angle Iron (35X35x5 mm), Length : 460 mm x 2 Nos
47MS A.I.(50X50x6 mm), Length: (950 mm) x 2 Nos. of bed knee bracing
48MS Angle Iron (50X50x6 mm), Length : (2800 mm) x2 Nos for Transformer LT Distribution Box and G.O switch fixing assembly
49MS Angle Iron (50X50x6 mm), Length : (450 mm)x1 Nos for Transformer LT Distribution Box and G.O switch fixing assembly
50G.O. Switch handle supporting: [C.I. (75x40x6mm), length: 460mm for Transformer LT Distribution Box and G.O switch fixing assembly
51G.O AB switch unit (11KV,400,663KA) Tripple pole O/D type
52D.O Fuse unit
53Surge Arrester, 9 kV Station Class
54Discs insulator sets (comp. 1 No. Disc: ^^(Porcelain, BS, 12 kV, 90 kN) i/c Dead End Clamps etc.)
55Stay set complete
56Staywire (7/3.15mm)( 10 Kg per stay set)
57Pipe earthing with GI,Charcoal & Salt
58Prov. LT distribution panel with MCCB (400 A, 36 KA, 4P,1 No.) & SFU (100 A 4 No. rewireble) for 250KVA Trf. as per specification
59Half clamp (M.S. Flat 50x6)
60Full clamps (M.S. Flat 50x6)
61M. S. Nuts & Bolts off sizes (Galvanised coated) [prefarably 16mm Ø or more (with flat and spring washer)
62Aluminium Thimbles
63Copper Thimble
64Danger Plate
65Barbed wire (REC Sp F 3/1981)
66LT Cable 3-1/2 core-185mm sq.
67Alluminium Paint
68Prov.ACSR, 6/1/3.35 mm
69prov. HP make AIQ Desktop Model HP 200 G4 with intell core 3-10110U-10 Gen.processor, 8GB DDR4 RAM expenditure upto 16 GB, ITB, HDO (T2QORPM)2st antiglare LED desplay withFHD (1920x1060) integrated HD Graphics & Webcam, 2xUSB, 3.0 2xUSB, 2.0 Cardreacer. Audio part VGNHDMI/DP Port, 10x100, 1000Mcomdliant LAN USB key board & mouse internalspl. connectivity BO2 11 b/g/n/ac PL windows etc. with three years on site warranty. (II) 650VA offline UPS system with12Vx7AHx2Nos: 158VAH/SMF batteryto povide20 Min. battery back upwith three year warrantyon UPS &battery from delivery with printer
70Prov. Transformer Bed plinth for 250KVA S/Stn structure complete with CC 1:6:12 R.R. massonery & plastering etc. a/w Chain link fencing, Angle iron Gate etc. for DTR Fencing.
71Supply Part of HT LINE WITH ACSR 6/1/3.35 mm sq. ON STEEL POLES (1.04 KM)
72ACSR 6/1/3.35 (55mm²) {Includes 3 conductor lengths for 3F and Additional 1% (Sag, Jumpering and wastage}
73Prov. Steel tubular poles. 10mtrs
74Muff for steel tubular pole (2000mm long) with concrete filling
75Cross Arm: [Channel Iron (100x50x6 mm), Length 1270 mm (i/c tolerence of 100mm either side) x2 structure( Run Through structure (Formation Tringle)
76Angle Iron (50x50x5 mm), Length (2x750) mm x 1 structures (Run Through structure (Formation Tringle)
77Pole Top Bracket [MSCI:100x50x6mm-100mm]
7811 kV Pin Insulators (Porcelain, 12 kV, 10 KN): 3 No per pole structure (Run Through structure (Formation Tringle)
79Belt Set - MS Angle Iron: 50x50x6, Length [1800 mm x 2 No.]for Dead End Structures
80X-Bracing Set - MS Angle Iron: 50x50x6, Length [2125 mm x2 No.] for Dead End Structures
81X-Arm(Horizental) - MS C. Iron: 50x50x6, Length [2340 mm x2 No.]for Dead End Structures
82Discs insulator sets on Dead End structures (comprising 1 No. Disc: ^^(Porcelain, BS, 12 kV, 90 kN) including Dead End Clamps etc.) x (3 No. conductors) x (2 No. sides)for Dead End Structures
8311 kV Pin Insulators (Porcelain, 12 kV, 10 KN): 3 No per pole structure for Dead End Structures
84Stay set complete in all respect ( Single Pole-1No. , /D. Pole Structures-4Nos.)
85Stay Wire (7/3.15 mm) (8.0 kg Per Stay Set)
86HT earthing set complete (REC Constr. Standared J-1)
87Single Continous Earth wire (GI, 8 SWG) {alongwith 1 wire lengths for avg. one road crossing @ 20 m and Additional 1% (Sag and wastage)} @ 0.102 kg/m
88Eye Hook for earth wire
89Earth Wire Clamp
90MS Chanel Iron 75x40x6mm, length: 2400mm for road crossing/G.O Switch
91Half clamp (on D/P dead end str:4Nos; on Run Through Str. 2Nos.)
92Full clamp (on D/P dead end str:4Nos; on Run Through Str. 2Nos.)
93Danger Plate (250X200X1.6 mm)
94M. S. Nuts & Bolts off sizes (Galvanised coated) [prefarably 16mm Ø or more (with flat and spring washer)
95Barbed wire (REC Sp F 3/1981)
96G.O AB switch unit (11KV,400,663KA) Tripple pole O/D type
97Alluminium Paint
98Cable Termination Kit (Out door type)
99Cable Termination Kit (Indoor type)
10011KV XLPE Cable 3 core 240mm for 33/11 KV S/Stn. Koti
101Erection Part of HT LINE WITH ACSR 6/1/3.35 mm sq. ON STEEL POLES (1.04 KM)
102ACSR 6/1/3.35 (55mm²) {Includes 3 conductor lengths for 3F and Additional 1% (Sag, Jumpering and wastage}
103Prov. Steel tubular poles. 10mtrs
104Muff for steel tubular pole (2000mm long) with concrete filling
105Cross Arm: [Channel Iron (100x50x6 mm), Length 1270 mm (i/c tolerence of 100mm either side) x2 structure( Run Through structure (Formation Tringle)
106Angle Iron (50x50x5 mm), Length (2x750) mm x 1 structures (Run Through structure (Formation Tringle)
107Pole Top Bracket [MSCI:100x50x6mm-100mm]
10811 kV Pin Insulators (Porcelain, 12 kV, 10 KN): 3 No per pole structure (Run Through structure (Formation Tringle)
109Belt Set - MS Angle Iron: 50x50x6, Length [1800 mm x 2 No.]for Dead End Structures
110X-Bracing Set - MS Angle Iron: 50x50x6, Length [2125 mm x2 No.] for Dead End Structures
111X-Arm(Horizental) - MS C. Iron: 50x50x6, Length [2340 mm x2 No.]for Dead End Structures
112Discs insulator sets on Dead End structures (comprising 1 No. Disc: ^^(Porcelain, BS, 12 kV, 90 kN) including Dead End Clamps etc.) x (3 No. conductors) x (2 No. sides)for Dead End Structures
11311 kV Pin Insulators (Porcelain, 12 kV, 10 KN): 3 No per pole structure for Dead End Structures
114Stay set complete in all respect ( Single Pole-1No. , /D. Pole Structures-4Nos.)
115Stay Wire (7/3.15 mm) (8.0 kg Per Stay Set)
116HT earthing set complete (REC Constr. Standared J-1)
117Single Continous Earth wire (GI, 8 SWG) {alongwith 1 wire lengths for avg. one road crossing @ 20 m and Additional 1% (Sag and wastage)} @ 0.102 kg/m
118Eye Hook for earth wire
119Earth Wire Clamp
120MS Chanel Iron 75x40x6mm, length: 2400mm for road crossing/G.O Switch
121Half clamp (on D/P dead end str:4Nos; on Run Through Str. 2Nos.)
122Full clamp (on D/P dead end str:4Nos; on Run Through Str. 2Nos.)
123Danger Plate (250X200X1.6 mm)
124M. S. Nuts & Bolts off sizes (Galvanised coated) [prefarably 16mm Ø or more (with flat and spring washer)
125Barbed wire (REC Sp F 3/1981)
126G.O AB switch unit (11KV,400,663KA) Tripple pole O/D type
127Alluminium Paint
128Cable Termination Kit (Out door type)
129Cable Termination Kit (Indoor type)
13011KV XLPE Cable 3 core 240mm for 33/11 KV S/Stn. Koti
131Supply Part of CT/PT Unit
132Prov. 11KV CT-PT unit i.e. PT (1 unit, 11KV/110V):CT (3No.10-400/500A) accuracy class 0.5S.
133Prov, Energy meter (3 phase, 4 wire) HT CT type for Above
134Pvc Multistrand 4 mm Sq. copper wire with 1 inch GI pipe fir concealing
135X-Arm: [Channel Iron (100x50x6 mm), Length : 460 mm X 2 Nos] for supporting main channel for CT-PT unit
136CT-PT Unit Belting and Knee Bracing
137MS Angle Iron (50x50x5 mm), Length : 2800mmx 4 Nos.
138MS Angle Iron (35x35x5 mm), Length : 2800mmx 2 Nos.
139Half clamp (MS Flat 50x6 mm)
140Full clamp (MS Flat 50x6 mm)
141Nut & Bolts off size
142Aluminium Thimble
143copper Thimble
144Erection Part of CT/PT Unit
145Prov. 11KV CT-PT unit i.e. PT (1 unit, 11KV/110V):CT (3No.10-400/500A) accuracy class 0.5S.
146Prov, Energy meter (3 phase, 4 wire) HT CT type for Above
147Pvc Multistrand 4 mm Sq. copper wire with 1 inch GI pipe fir concealing
148X-Arm: [Channel Iron (100x50x6 mm), Length : 460 mm X 2 Nos] for supporting main channel for CT-PT unit
149CT-PT Unit Belting and Knee Bracing
150MS Angle Iron (50x50x5 mm), Length : 2800mmx 4 Nos.
151MS Angle Iron (35x35x5 mm), Length : 2800mmx 2 Nos.
152Half clamp (MS Flat 50x6 mm)
153Full clamp (MS Flat 50x6 mm)
154Nut & Bolts off size
155Aluminium Thimble
156copper Thimble
157Supply Part of THREE PHASE LT LINE WITH ACSR 6/1/3.35 mm sq. ON STEEL POLES(0.330KM)
158ACSR 6/1/3.35 mm sq.
159Steel Pole 9 Mtr. Long (1800mm long)
160Muff for steel tubular pole
161Shackle insulators (16KN) (RECD-3/761)(ISS No 1445/1977)
162D-iron (U-Clamp) (RECD-4/79)(ISS No 7935/1975)
163Earth Knob
164LT Saty Set CompleteREC No 31/1983
165Stay Wire (7/3.15 mm) (10.0 kg Per Stay Set)
166Prov. Full clamp
167Coil Earthing (spec J-1/72)
168G.I.Wire No 8 SWG Earth wire1.03km (Sep.G-2/72) for suporting cable
169Spool Tie
170M.S.Nuts & Bolt off Sizes
171A.I 75x75x6mm (Length 1.5+0.2Mtr.
172XLPE Cable 3 core 240mm for supply upto Control Panel for Motor
173Aluminium paint
174Erection Part of THREE PHASE LT LINE WITH ACSR 6/1/3.35 mm sq. ON STEEL POLES(0.330KM)
175ACSR 6/1/3.35 mm sq.
176Steel Pole 9 Mtr. Long (1800mm long)
177Muff for steel tubular pole
178Shackle insulators (16KN) (RECD-3/761)(ISS No 1445/1977)
179D-iron (U-Clamp) (RECD-4/79)(ISS No 7935/1975)
180Earth Knob
181LT Saty Set CompleteREC No 31/1983
182Stay Wire (7/3.15 mm) (10.0 kg Per Stay Set)
183Prov. Full clamp
184Coil Earthing (spec J-1/72)
185G.I.Wire No 8 SWG Earth wire1.03km (Sep.G-2/72) for suporting cable
186Spool Tie
187M.S.Nuts & Bolt off Sizes
188A.I 75x75x6mm (Length 1.5+0.2Mtr.
189XLPE Cable 3 core 240mm for supply upto Control Panel for Motor
190Aluminium paint

AI Tender Summary

OUR REF NO 36559785
AUTHORITY Government Departments
TENDER VALUE 42.49 Lakhs
LAST DATE 09-03-2023
Authority
Authority Name Himachal Pradesh State Electricity Board
Work Description Tender For Supply Of Equipment Material , Design, Erection, Testing Commissioning For Sop To Jsv, Lwss Phase-2Nd Gunu Gharat To Pakhrotu In Gp Kandla By Prov. 11/.4 Kv 3X250 Kva S/Stn. At Village Sapra A/W 11 Kv Ht And Lt Line Section Koti Under Tender For Supply Of Equipment / Material , Design, Erection, Testing Commissioning For Sop To Jsv, Lwss Phase-2Nd Gunu Gharat To Pakhrotu In Gp Kandla By Prov. 11/.4 Kv 3X250 Kva S/Stn. At Village Sapra A/W 11 Kv Ht And Lt Line Section Koti Under
Basic Detail
Tender No OCD/DB/Bid-49/2022-23
Bidding Type Tender
Location
City dalhousie
State Himachal Pradesh
Key Dates
Publish Date 01 Mar 2023
Submission Date 09 Mar 2023
Open Date 10 Mar 2023
Finance
Tender Value 42.49 Lakhs
Tender Fee 1180
EMD 42494
Exemption Not Available
Document List
37962876-dbfc-4671-aaec-44870aebdb07.html
Biddoc49.rar
BOQ_105420.xls
Tendernotice_1.pdf
AI-generated summary — verify details from the official tender portal before submission.

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Mar 01, 2023
11:30 IST

Tender Published

Tender notice published.

Completed
Mar 09, 2023
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Completed
Mar 10, 2023

Bid Opening Date

Technical bids will be opened and evaluated.

Completed

Tender Documents

Download All (ZIP) ↓
html

37962876-dbfc-4671-aaec-44870aebdb07.html

rar

Biddoc49.rar

xls

BOQ_105420.xls

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender

TenderDetail
Loading tenders