Tender For Repair And Maintenance Work Of Nagina Branch Head Regulator Situated At Km. 46.400 Of Egc At Distt-Bijnor (Up).
Tender Value
Ref. Documents
Estimated cost
Bid Submission
14 Mar 2023
0 days left
EMD
35000
Bank guarantee accepted
Document Fee
590
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
nagina → Uttar Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Repair And Maintenance Work Of Nagina Branch Head Regulator Situated At Km. 46.400 Of Egc At Distt-Bijnor (Up).
BOQ
| Sl. No. | Item Description |
| 1 | Greasing oiling of component of lifting mechanism of gates (excluding Rollers Drum Gears Pinion) after proper cleaning with replacing grease cup/ grease nipple as required including cost of labour and T&P etc. as required for proper completion of work. |
| 2 | Applying cardium Compound on steel wire rope, teeth of drum gear and pinion of gate after proper cleaning including cost of all material labour T&P and scaffolding with arrangement as required for proper completion of work. |
| 3 | Repairing damaged rollers assembly of regulator after detaching from gate by cutting lock plate bolt, nuts putting at ground level shifting from regulator gate to working place dismantling all parts cleaning repairing, greasing, replacing, damaged/worn out parts as required and reassembling and fitting in gate testing by manually operating gate including cost of all material labour and T&P etc. as required for completion of work. |
| 4 | General Repairing and servicing of central hand drive unit system by dismantling and cleaning required damaged broken spare parts and reassembling fitting, greasing and testing including all cost of material labour T&P etc as required for proper completion of work. |
| 5 | Straightening of bend drive floating shaft by dismantling taking out it to hydraulic press and straightening it by press machine and checking its alignment on lath machine and taking back to site and fitting including changing of damaged plummer block and touching of paint as required including all cost of labour material and T&P for proper completion of work. |
| 6 | Raising of railing by fabrication and fixing with ms channel 75x40x5 mm flat iron 40x5 mm square bar 16 mm including cutting fabricating welding in workshop and carriage from workshop to site erection by in proper leveling and alignment with scaffolding and help of hydra with two coat of synthetic enamel paint after one coat of red oxide zinc chromate primer required including all cost of labour material and T&P for proper completion of work. |
| 7 | Replacing of bottom rubber seal size 80x20 mm as per IS Code 11855 by removing old/damaged rubber seal from gate scrapping and cleaning surface making holes fixing and clamping the ms plate by new countersunk head high tensile bolt nuts washer making adjustment as per requirement of site required including all cost of labour material and T&P for proper completion of work. |
| 8 | Replacing of side rubber seal size 120x12mm, 45mm note dia as per IS Code 11855 by removing old/damaged rubber seal from gate scrapping and cleaning surface making holes fixing and clamping the ms plate by new countersunk head high tensile bolt nuts washer making adjustment as per requirement of site required including all cost of labour material and T&P for proper completion of work. |
| 9 | Repairing of damaged/broken teeth of drum gear of gate by chiseling teeth drilling holes. Tapping in hole for making threads, fixing studs, welding by CS/C. I electrodes for making new teeth , chipping, grinding and policing as per required size and shape including cost of all material, labour, diesel welding generator set with operator and other required T&P etc as required for proper completion or work. |
| 10 | Fabrication & erection of rope drum cove by ms sheet 14 Swg 2mm thick angle 40x40x5 mm size with measuring marking cutting by gas and welding by generator set as per sample shifting ground level to super structure including cost of gas electrodes diesel generator sets and other required material MS sheet, MS Angle labour T&P etc as required for proper completion of work. |
| 11 | Replacing broken/ missing damaged nut bolts in hydro mechanical equipment and their components after proper checking of bolts nuts including cost of material labour T&P as required for completion of work. |
| 12 | Repairing of guide roller (side sway roller) by taking out defective guide roller from gate rethreading of foundation hole after extracting broken foundation bolts repairing of pin by remetaling by welding machining of roller shaft assembling the guide roller and fitting of gates with new foundation bolts and new rubber bushes and necessary oiling and greasing including cost of material labour and T&P test and trial |
| 13 | Fabrication & fixing railing panel by MS channel75x40x5 mm flat iron 40x5 MS square 16mm and MS plate 6mm thick including cutting fabricating welding workshop and carriage from workshop to site erection with CC 1:2:4in proper leveling and alignment with scaffolding and help of hydra with two coat of synthetic enamel paint after one coat red oxide zinc chromate primer including cost of all material labour and T&P etc. |
| 14 | rectifying defective alignment of gates by adjusting length of steel wire rope and other allied work as required including cost of all material labour and T&P jigs and fixtures and scaffolding etc as required |
| 15 | Painting on decking of super structures and appurtenances by applying one coat of red oxide Zinc Chromate primer and two coats of High build black bitumen’s paints of standards make such as Berger Asian, Shalimar after proper cleaning, scrapping preparing the surface including the cost of mater labour T&P scaffolding as required including cost of primer and paint both up and down sides. |
| 16 | Painting on hoist and supporting structure of gates by applying one coat of red oxide Zinc Phosphate primer on rusted area and two coat of High glass synthetic enamel paint of standard make such as Berger, Asian, Shalimar after proper cleaning, scrapping preparing the surface including the cost of material labour T&P scaffolding as required including cost of primer and enamel paint. |
AI Tender Summary
Tender Timeline
Mar 01, 2023
11:30 IST
Tender Published
Tender notice published.
CompletedMar 14, 2023
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedMar 14, 2023
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender