Tender For Construction Of Drinking Water Scheme At Dhanmatia Vidyasagar Madhyamik Shiksha Kendra Under Barokodali-Ii G.P. Within Tufanganj- Ii Panchayet Samity, Dist. Cooch Behar.
Tender Value
2.74 Lakhs
Estimated cost
Bid Submission
10 Mar 2023
0 days left
EMD
5500
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
tufanganj → West Bengal
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Construction Of Drinking Water Scheme At Dhanmatia Vidyasagar Madhyamik Shiksha Kendra Under Barokodali-Ii G.P. Within Tufanganj- Ii Panchayet Samity, Dist. Cooch Behar.
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in excavation of foundation trenches of drains in all sorts of soil (including mixed soil but excluding laterite or sandstone) including removing. Spreading or stacking the spils within a lead of 75 m. as directed. The item includes necessary trimming the sides of trenches, leveling, dressing and ramming the bottom, bailing out water as required complete. |
| 2 | Earth work in filling foundation trenches or plinth with good layers not exceeding 15cm including watering ramming etc by layer complete (Payment to be made on basis of measurement of finished quantity work) (a) With earth obtained from excavation of foundation |
| 3 | Filling in foundationor plinth by silver sand in layers not exceeding 15cm including watering ramming etc by layer complete (Payment to be made on basis of measurement of finished quantity work) |
| 4 | Single Brick Flat Soling of picked jhama bricks including ramming and dressing bed to proper level and filling joints with local sand. |
| 5 | Brick work with 1st class bricks in cement mortar (6:1) In foundation and plinth. |
| 6 | Cement Concrete with 30mm down graded shingles excluding shuttering N.B. Variety.A) 1:3:6 proportin |
| 7 | Ordinary Cement concrete (mix 1:1.5:3) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement if any, in ground floor as per relevant IS codes. |
| 8 | Reinforcement for reinforced concrete work in all sorts of structures including distribution bars, stirrups, binders etc. including supply of rods, initial straightening and removal of loose rust (if necessary), cutting to requisite length, hooking and bending to correct shape, placing in proper position and binding with 16 gauge black annealed wire at inter-section, complete as per drawing and direction.for works in foundation,basement and upto roof of ground floor / upto 4.0m. i. Tor steel / Mild steel (TATA/SAIL/RINL) |
| 9 | Hire and labour charges for shuttering with centering and necessary staging upto 4 m using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, beams and columns, lintels curved or straight including fitting, fixing and striking out after completion of works (upto roof of ground floor) (f) 25 mm to 30 mm shuttering without staging in foundation |
| 10 | (a) 25 mm to 30 mm wooden shuttering as per decissaion and direction |
| 11 | 125 mm. thick brick work with 1st class bricks in cement mortar (4:1) in ground floor. |
| 12 | Plaster ( to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering conrners as directed and raking out joints or roughening of concrete surface, including throating, nosing and drip course where necessary (ground floor). with 6:1 cement mortar 15 mm. thickplaster (outer Portion) |
| 13 | Supplying fitting and fixing 1st quality Ceramic Tiles to walls and floors to match with the existing work and 4nos of key stones 10mm fixed with Araldide at the back of each tile and finishing the joints with white cement mixed and colouring oxide required to match the colour of tiles including roughening of concrete surface if necessary or by synthetic adhesive and grout materials etc With Sand Cement Mortar (1:3) 15mm thick & 2mm thick cement slurry at back side of tiles using cement @2.91 kg/sqm & joint filling using white cement slurry @ 0.20 kg/sqm (a) Area of each tile up to .09 sqm(i) Coloured decorative(A) Floor |
| 14 | -do- (b) Wall |
| 15 | Neat cement punning about 1.5 mm. thick in wall, dado, window, sills, floor, drain etc. |
| 16 | M.S. or W.I. ornamental grill or approved designjoints continuously welded with Msor WI flat and bars for windows , railing etc. fitted and fixed with necessary screws and lugs in G.F. |
| 17 | Applying decorative cement base paint of approved quality after preparing the surface including scraping the same thoroughly (plastered or concreted surface) as per manufactures specification(two coats) |
| 18 | Priming one coat on steel or other metal surface with syntheticoil bound prinmer of approved quality including smoothening surfaces by sand papering etc. |
| 19 | (A) Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sandparpering etc. in cluding using of approved putty etc. on the surface , if necessary.a) On steel or other metal surface: |
| 20 | Supply fitting fixing storage cooler cum purified including fitting fixing complete, Bluestar 60/80, with Vascle and Jumbo filter |
| 21 | suppplying fitting and fixing 1.0 H.P cromptom .pumps including instralation charhge |
| 22 | Supplying P.V.C. water storage tank of approved quality with closed topwith lid (Black) - Multilayer. 1000 ltr capacity |
| 23 | Labour for boring tube well of required dia. by water jet system through any type of soil strata including hire and labour charges for boring pipes, scaffolding, tools and plants as necessary and taking out them and lowering pipes, strainers, blind pipe etc. and fitting and fixing the same complete including bucket washing and other incidental works in the connection. The tube well should have a minimum 50 mm gap in between the outside of the tubewell pipe and the bore.a) for depth up to 150.00m..40mm dia |
| 24 | Supplying G I pipe strainer of approved make with adapter….i) 40 mm dia. |
| 25 | Supply of GI Pipes of TATA make including necessarys ockets.(e) 40 mm dia.(ii) Medium quality |
| 26 | Supplying, fitting and fixing bib cock or stop cock.(a) (i) Chromium plated Bib Cock short body (Equivalent to Code No. 511& Model - Tropical / Sumthing Special of ESSCO or similar brand). |
| 27 | Electrification |
| 28 | GST(18%) |
| 29 | LABOUR CESS(1%) |
AI Tender Summary
Tender Timeline
Mar 01, 2023
11:30 IST
Tender Published
Tender notice published.
CompletedMar 10, 2023
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedMar 13, 2023
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender