Department Of Technical Education And Industrial Training has published Tender For Supply Of Machinery And Equipments Of Welder Fitter And Rac. Submission Date for this Tender is 21-03-2023. Cutting Crimping and Punching Tools Tenders in batala Punjab. Bidders can get complete Tender details and download the document.
Sl. No. | Item Description |
1 | *SS and SC centre lathe (all geared) with minimum specification |
2 | Compressor unit |
3 | Pneumatic Trainer Kit, each consisting of the following matching components and accessories |
4 | I. Single acting cylinder |
5 | II. Double acting cylinder |
6 | III. 3/2-way valve |
7 | IV. 3/2-way valve |
8 | V. One-way flow control valve |
9 | VI. 5/2-way valve |
10 | VII. 5/2-way valve |
11 | VIII. 5/2-way pneumatic actuated valve |
12 | IX. 3/2-way roller lever valve |
13 | X. Shuttle valve (OR) |
14 | XI. Two-pressure valve (AND) |
15 | XII. Pressure gauge |
16 | XIII. Manifold with self-closing |
17 | XIV. Pushbutton station for electrical signal input |
18 | XV. Relay station |
19 | XVI. 3/2-way single solenoid valve |
20 | XVII. 5/2-way single solenoid valve |
21 | XVIII. 5/2-way double solenoid valve |
22 | XIX. Power supply unit |
23 | XX. Profile plate, Anodised Aluminium |
24 | Pneumatic Workstation with 40 square mm aluminium profile legs, wooden work surface, and one pedestal drawer unit having 5 drawers, each with handles and individual locks, on metallic full panel drawer slide |
25 | Hydraulic Trainer Kit, each consisting of the following matching components and accessories: |
26 | I. Hydraulic Power pack |
27 | II. Pressure relief valve |
28 | III. Drip tray, steel |
29 | IV. Pressure Gauge |
30 | V. Four-Way distributor |
31 | VI. Double acting hydraulic cylinder |
32 | VII. Suitable Weight |
33 | VIII. Mounting kit for weight |
34 | IX. 3/2-way directional control valve |
35 | X. 4/2-way directional control valve w |
36 | XI. 4/3-way directional control valve |
37 | XII. Non-return valve |
38 | XIII. Pilot-operated check valve |
39 | XIV. One-way flow control valve |
40 | XV. T-Connector with self-sealing coupling nipples (2 Nos.) and quick coupling socket (1 No.). |
41 | XVI. Profile plate, |
42 | Hydraulic Workstation with 40 square mm aluminium profile legs, wooden work surface, and one pedestal drawer unit having 5 drawers, each with handles and individual locks, on metallic full panel drawer slide: |
43 | Cut-section models for hydraulic components |
44 | Suitable Arc welding table with positioner |
45 | Power saw machine |
46 | Water cooled induction welding/Brazing machine |
47 | C.R.O Single beam |
48 | C.R.O Dual trace/ Double beam |
49 | Single door direct cool refrigerator, carrying with HFC and HC |
50 | Frost free refrigerator |
51 | Three/four door refrigerator ( Inverter type) |
52 | Window A.C |
53 | Split A.C |
54 | Duct able split A.C 1.5 ton |
55 | Shell and tube, DX chillers (small) |
56 | Display Cabinet |
57 | Water cooler storage type |
58 | Bus AC tutorial model |
59 | Automatic ice cube m/c |
60 | Storage type water cooler( hot and cold) |
61 | VRF/VRV unit with two indoor units 2.5TR each and 5TR capacity out door unit complete with air cooled condenser, accessories and controls. |
62 | Split A/C ( inverter technology) |
63 | Walk in cooler PUF insulated for cold room 6X4.5X8 cft. |
64 | Absorption system |
65 | Work bench |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail