Tender For Supply Installation Testing Commissioning Of Lt Outgoing Panel For Set No-4,5 And 6 At Gk(South) Bps., Delhi-Delhi

Supply Installation Testing Commissioning Of Lt Outgoing Panel For Set No-4, 5 And 6 At Gk ( South ) Bps. , Providing Of Air Circuit Breakers ( Acb ) Of Triple Pole 415V, Ac, 50Hz, 50Ka Tripping Of 1000 Amps Micro Processer Based Edo Type. Make: L&T , Providing Of Mccb 50Ka Tripping Of 400Amps.Tp Make: L&T , Amp Meter Digital Make:-L&T , Indicating Lamp Make:- L&T , Under Volt Relay Make: L&T , Dismantling Of Old Structure& Other Accessories From Existing Panel, Removing Of All Cables Connection After Taking Shut Down With Help Of Gas Cutter, Heavy Labour Etc. , Providing / Fixing And Making Connection Of Bus Bar Size 100X10mm Including Links, Bends, Aluminum Bus Bar Will Be Of Electrolytic Gradeconductivity Or As Per Relevant Is Having Sufficient Cross Section Area Insulated With Heat Shrinkable Pvc Sleeve Inphase Color Identification. The Bus Bar Support Insulator Shall Be Of Class F Insulation Made Out Of Non-Hygroscopic Material As Smc / Dmc. All Hard Ware For Connection / Joints Shall Be In High Tensile. , Providing / Fixing And Making Connection Of Bus Bar Size 50X10mm For Mccb Including Links, Bends, Aluminum Bus Bar Will Be Of Electrolytic Gradeconductivity Or As Per Relevant Is Having Sufficient Cross Section Area Insulated With Heat Shrinkable Pvc Sleeve Inphase Color Identification. The Bus Bar Support Insulator Shall Be Of Class F Insulation Made Out Of Non-Hygroscopic Material As Smc / Dmc. All Hard Ware For Connection / Joints Shall Be In High Tensile. , Arrangement Of Incoming / Outgoing Cable Termination By Providing & Fixing Of Terminal Link Of Current Carrying Capacity 1000Amp.With Phase Separator I. Removable Cable Gland Plate To Be Provided For Each Cable Entry With Cable Gland. Making Connection Of Both Incoming & Out Going Side As Required With Proper Insulation. , Providing / Fixing Of Ms Enclosure In 16Swgsheet Duly Painted Having Locking Door With Gas Cut As Suitable To Fit In Existing Panel For Fitting Of Acb & Mccbin Place Of Old Circuit Breaker Complete With Hard Ware’S Etc. It Will Be Symmetrical With Existing Panel Of Size 2250 X 1800 X 1000 Mm. , Fixing Of The Mccb In Newly Fixed Panel Enclosure, Making Connection With Bus Bar Including Hard Ware. , Fixing Of The Acb In The Existing L T Panel Board Including Providing & Fabrication & Fixing Of The Base Frames Of Suitable Sizes For Acbs In The Chamber. Fixing All The Measuring Instruments , Lamps, Etc. At The Meteringchamber Along With Complete Wiring Through 2.5 Sq Mm Single Core Copper Wire Including Providing And Fixing Of Necessary Ferrules Etc. And Fixing The Backup Fuses As Per Requirement. , Loading, Unloading, Cartage And Transportation Charges For The Above Panel Up To The Site Including Charges Of Heavy Labour Etc. , Testing & Commissioning Of The Panel And Installed Equipment’S, As Per Required Parameters With Relevant Is .Testing Of The Panel Prior To Switching On As Followi ) Continuity And Earth Testing Ii ) Meggaring Of All Equipments For Phase To Phase, Neutral To Body, Neutral To Earth And Phase To Earth. Iii ) Checking For All Tightness Of Nut And Bolts Iv ) Alignments Of Doors Etc. V ) Interlocking Tests. Vi ) All Function Tests

INR 500 /-

INR 22300.0 /-

Refer document